REPAIR REPLACEMENT OF INTERNAL WIRING FITTINGS AND FIXTURES AT KHREW SHER E SHALI AND KHUNMOH UNDER GE 861 EWS

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including unscrewing from board fitting and fixture such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody for reuse if serviceable or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and including PVC casing and capping/Conduit medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size or PVC Gang Box with 3 mm thick plastic laminated sheet cover of adequate size for one light point/fan point controlled by one switch and making good disturbed surfaces with CM (1:3) to match with the existing surface, complete all as specified and directed.

All as per srl item No-2 here in above but for one 3 pin 5A socket outlet independent controlled by one switch, complete all as specified and directed.

All as per srl item No-2 here in above but for one 5A socket outlet on the same board controlled by one switch, complete all as specified and directed.

All as per serial item No 2 here-in-before but for 3 pin 15 Amps socket outlet independent board with 2.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green color) as earth lead, complete all as specified and directed.

M&L concealed Point wiring complete with 1.5 sqmm 1100 graded PVC FRLS (Multistrand) insulated unsheathed copper conductor, PVC conduit not less than 20mm dia concealed, including cutting chases, finishing of slote by means of cement mortar making good to existing surface of the wall and touching with three coats of existing colour of wall and making good disturbed surface complete sunk in pressed steel terminal boxes of required size not less than 1.6mm thick factory made and factory painted with top cover 3mm thick plastic laminated sheet fixed with brass screw and washers with all accessories including single core multistranded copper conductor 1.5Sqmm size cable as earth continuity wire connected to common earth dolly to modular concealed box and white cover plate of required nos and required size for housing switches, sockets etc for one light / fan/ bell point controlled by one switch one way and making good disturbed surfaces with CM (1:3) to match with the existing surface, complete all as specified and directed.

All as per srl item No-6 here in above but for one 3 pin 5A socket outlet independent controlled by one switch, complete all as specified and directed.

All as per srl item No-6 here in above but for one 5A socket outlet on the same board controlled by one switch, complete all as specified and directed.

All as per srl item No-6 here in above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green color) as earth lead, complete all as specified and directed.

M&L for sub main wiring with two single core PVC insulated flexible copper conductor cable of size 4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead in & including PVC casing capping medium grade 2mm thickness ISI marked incl taking down old unsv complete all as required at site or directed.

M&L for sub main wiring with two single core PVC insulated flexible copper conductor cable of size 6 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 6 Sqmm as earth lead in & including PVC casing capping medium grade 2mm thickness ISI marked incl taking down old unsv complete all as required at site or directed.

M&L for Switch piano flush button single pole one way 5 amps 240 volts, complete all as specified and directed.

M&L for Switch Socket combination, 6 pin 5 and 15 amps multi purpose 2 in 01 flush type, 230 volts, complete all as specified and directed.

M&L for Switch Socket combination 2 in 1, 5 Amps flush type, 230 volts, complete all as specified and directed.

M&L for Socket outlet 2 in 1, 3 pin, 6 Amps flush type 50 Hz all as specified and directed.

M&L for socket out let, 6 pin 5 and 15 amps multi purpose 2 in 01 flush type, 230 volts 50 Hz all as specified and directed.

Ceiling rose 3 terminal bakelite 65mm x50mm surface type, PVC/Polycarbonate, isolated body, complete all as specified and directed.

Supply and fixing in replacement fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically all as required at site or directed.

S & F in repair lamp holder, PVC/ Polycarbonate type with back plate, straight/ angular, suitable for batten fittings, complete all as specified and directed.

Supply & fixing in repair bell push, flush type, 5 Amp, complete all as specified and directed.

Supply & fixing in repair bell/buzzer AC 230 volts single pole, complete all as specified and directed.

Supply and fixing in repair Plug top 3 pin 15/16 amps 230 volts, complete all as specified and directed.

Supply and fixing in repair, Plug top 3 pin 5/6 amps 230 volts, complete all as specified and directed.

Supply & fixing in repair PVC Gang box surface type suitable for fixing of 5 pin 15 Amp multipurpose switch socket on wall complete all as specified and directed.

Supply & fixing in repair PVC Gang box surface type suitable for fixing of 5 pin 5 Amp multipurpose switch socket on wall, complete all as specified and directed.

Supply & fix in repair Rigid non-metallic grade PVC conduit of size 20 mm dia, exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc, complete all as specified and directed.

Supply & fixing in repair Rigid non-metallic PVC conduit of size 25 mm dia, exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc, complete all as specified and directed.

Supply & fix in repair medium grade PVC casing and capping of size 20 mm dia, exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc, complete all as specified and directed.

Supply and fix in replacement cable PVC FRLS insulated unsheathed with flexible multistranded copper conductor of size 1.5 Sqmm 1100 Volts grade as per site requirement of existing colour coding adopted, complete all as specified and directed.

Supply and fix in replacement cable PVC FRLS insulated unsheathed with flexible multistranded copper conductor of size 2.5 Sqmm 1100 Volts grade as per site requirement of existing colour coding adopted, complete all as specified and directed.

Supply and fix in replacement cable PVC FRLS insulated unsheathed with flexible multistranded copper conductor of size 4 Sqmm 1100 Volts grade as per site requirement of existing colour coding adopted, complete all as specified and directed.

Supply and laying in repair 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed twin core 4 sqmm nominal cross section in service connections, complete all as specified and directed.

All as per srl item No 32 above but 6 sqmm twin core, complete all as specified and directed.

Supply and fixing in repair LED 7 watt pin type bulb complete all as specified and directed.

S & F in repair decorative box type mirror light LED 8W fixture with in built electronic driver complete with all accessories prewired and connecting electrically to ceiling rose using PVC FRLS insulated and overall sheathed cable Make-Havells Cat Part No LUMILINEBS9WLED830SPCWH or equivalent in Philips/C&S/Bajaj/Halonix.

S&F in repair decorative ultra slim linear LED in replacement of 20 Watt , 4 ' long lighting fixture with extruded Al heat sink , environment friendly , energy efficient ready to use pack incl LED tube complete with inbuilt electronic driver , PCB , connector block etc including connecting up with three core twisted flexible copper conductor cable with suitable size LED tube all as specified and directed. Make : Havells Cat Part No LHDD02102674 or equivalent in Philips/C&S/Bajaj/Halonix.

Taking down old Unserviceable Bldg Sec light fitting and taken as credit including supply & fixing 25 W new generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaries with high power LED as light source along with suitable bracket incl all accessories all as specified and directed by Engr-in-charge. Make: Havells, Cat Part No: ENDURAPEARLSL25WLED 757SASYTOPC or equivalent in PHILIPS CAT PART NO BRP042 LED 19 CW MR SI PSU GR OR C&S CAT PART NO DRACO/25W LTESS25WLED.

Taking down the old UNSV Bed lamp fitting and taken as credit including Supply, Installation, testing and commissioning of LED Wall light with system wattage not more than 4W, using 3W for LEDs. The lumen output of LED shall be (Light source) shall not less than 230 lumens. The housing shall be of aluminium and white color coating. The head of the luminaries shall be adjustable type. The beam angle shall be < 50 deg. Lamp lifetime up to: 15,000 hrs. Total lumen output fixture: > 170 lm. Bulb technology: LED, Safety Extra Low Voltage. Mains power: Range 220 V–240 V, 50-60 Hz. IP code: IP20, protection against objects bigger than 12.5 mm, no protection against water. Class of protection: I - earthed. The luminaries shall be integrated type. The Net weight shall not exceed 0.3 kg. make: PHILIPS 56240/31/16 STAR or equivalent in Eglo 93154 Single LED Lamp or HAVELLS/ SYLVANIA 0050990

Supply, Installation, testing and commissioning in repair of surface mounted LED luminary with full glow designed luminary > 30% energy saving, maintenance free, CRI 80, System consumption should be between 28- 36W complete all as specified and directed. The type shall be of 2'x2'.PHILIPS CAT. No. SM 365C LED 32-6500 PSU OD GR or Havells Cat Part No PLUTO SURFACE 2X2 PLS34W LED 84 OS or C&S CAT PART NO . CYGNUS-CS/36W/2X2/W-LTCSP36W LED 2X2

Supply and install and commissioning new generation post top energy saving environmental friendly, long life aesthetically designed with symmetrical light distribution spun aluminium landscape luminaire with high power LEDs as light source suitable for pole dia 76mm complete all as specified and directed Make : - Havells Cat part No CORALPT35WLED757PSYMTOPC LHLC19145099 or equivalent Philips/C&S/Bajaj/Halonix.

Supply & install environmental friendly, ultra modern, energy saving bulk head 8W in die cast aluminium housing & frosted glass complete all as specified and directed. Cat Part No LHKL01160099 in Havells or equivalent in Philips/C&S/Bajaj/Halonix.

Supply, Installation, testing and commissioning in repair of Recess luminary with minimum 70 % lumen maintenance, CRI should be greater than 80, Housing should made of CRCA with opal diffuser. Electronic Driver should be in-built , power factor >0.9 with THD <10%. System consumption should be between 28- 36W. Similar to Philips Cat No : RC380B LED 30S -4000 G4 L60 W60 PSU OD OC or Havells cat part No PLUTONE 02X2 PLR 28W LED 84OS or C&S cat part No CYGNUS/36W/W - LTCRSLM36WATT 2X2 OR CROMPTON CAT PART NO LPL2-36-CDLL 2X2

Supply and fix in repair sheet metal enclosure MCB distribution board, single pole and neutral double door with IP-43 protection single phase 240 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated copper busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.

Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated copper busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.

Supply and fix in repair MCCB Distribution board, TP&N , vertical , double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link,415 Volts 8 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including 3 Pole V-Tec MCCB of 100 A rating & 16kA breaking capacity, MCCB pre-fitted at factory all as specified and directed.

M&L in repair for MCB single pole 240 volts 6 to 32 amps as per site requirement , with rupturing capacity 10 KA as per IS-8828-1996 (IEC-60898), biconnect upper and lower terminals , integrated label holder to ensure circuit identification complete all as specified and directed.

M&L in repair for MCB single pole and neutral 240 volts 6 to 32 amps 'C' Curve as per site requirement , with rupturing capacity 10 KA as per IS-8828-1996 (IEC-60898), biconnect upper and lower terminals , integrated label holder to ensure circuit identification complete all as specified and directed.

M&L in repair for MCB single pole and neutral 240 volts 40 to 63 amps 'C' Curve as per site requirement , with rupturing capacity 10 KA as per IS-8828-1996 (IEC-60898), biconnect upper and lower terminals , integrated label holder to ensure circuit identification complete all as specified and directed.

Supply & fixing in repair MCB four pole 415 volts, 40-63 amps 'C' Curve 10 kA capacity complete all as specified and directed.

Supply and fixing in repair MCCB four pole , 415 Volt, 63 Amps,25 KA , adjustable thermal & fixed magnetic setting complete all as specified and directed.

M&L painting of ceiling fan complete , using spray gun, in site with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust complete all as specified and directed.

S&F in replacement of capacitor 2/3.15 mfd AC 415 volts 50 Hz complete all as specified and directed.

S&F in replacement of capacitor 4 mfd AC 415 volts 50 Hz complete all as specified and directed.

S&F in replacement of ball bearing for ceiling fan /exhaust fan any size any make, complete all as specified and directed.

Rewinding of AC ceiling fan/wall mounting fan motor as existing at site any make with super enameled copper winding wire any gauge from 0.315mm to 0.193mm including cutting of old burnt winding. Sleeve work varnishing with `B' class insulation varnish, connection with flexible wire of appropriate size two core copper wire up to connector block qty of copper winding wire not less than 350 grams and not more than 500 grams per fan motor, complete all as specified and directed.

Rewinding of exhaust fan motor any size, from 225 to 400 mm sweep with supper enameled copper wire of any size ranging from 0.500mm to 0.285 mm including necessary cutting of old burnt winding wire, cleaning of slots and provision of necessary threading/sleeve work and taking out connection in lead with PVC copper wire of appropriate size up to connector block, complete all as specified and directed.

Taking down carefully geyser 25/35/50 liters capacity from wall after unscrewing nuts/bolts etc. and again refixing in position after necessary repair and replacement of spare parts including testing etc complete all as specified and directed. (spare parts shall be measured and paid for separately under respective items)

Replacement of unserviceable heating element AC 230 Volt of rating 1500W ISI mark as per existing any type complete all as specified and directed.

Replacement of unserviceable heating element AC 230 Volt of rating 2000W ISI mark as per existing any type complete all as specified and directed.

Replacement of unserviceable thermostat switch AC 230 Volt adjustable range from 0-90 degree Celsius complete all as specified and directed.

Replacement of flexible PVC connection pipe heavy duty suitable for hot water to bear the temp of 100 degree centigrade with outlet and inlet connection brass adopters , washers of size 450 mm long 15 mm dia bore complete all as specified and directed.

Supply and fixing in repair Automatic source change over with current limiter 30/20A ACCL complete all as specified and directed by Engr-in-Charge. Make Havells Cat Part No DHABOSN3020 OR Equivalent in Legrand/L&T

Supply and fixing in repair change over switch on load 415 volts SPN in sheet metal enclosure of capacity 32Amps, complete all as specified and as directed.

Supply and fixing in repair change over switch on load 415 volts SPN in sheet metal enclosure of capacity 63Amps, complete all as specified and as directed.

Supply and fixing in repair change over switch on load 415 volts TPN in sheet metal enclosure of capacity 63Amps, complete all as specified and as directed.

Supply and fixing in repair change over switch on load 415 volts TPN in sheet metal enclosure of capacity 100Amps, complete all as specified and as directed.

Dismantling existing UNSV hylam sheet of any size from boards removing switches etc. Supply and fix hylam sheet 3mm thick including necessary cutting of suitable opening for switches, sockets, regulators, etc refixing of switches, sockets, regulators, etc replacing screws and connecting up and testing, complete all as specified and as directed.

Supply and fixing replacement of metal clad socket single pole and neutral enclosure with a two pin and earth plug top and socket complete with one single pole MCB 230 Volts 20/32 Amps all as specified and as directed.

Earthing complete with galvanised cast iron earth plate electrode of size 600x600x6 mm thick buried directly in ground less than 3.0m deep below normal ground level as earth electrode with top edge of the earth plate not less than 2.25mtr below ground level using GI strip 32x6mm as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade 40mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shore all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 or directed by Engineer-in-charge and incl testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long GI strip of size 32x6mm with protection pipe of 40mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by (-) 14.5% (minus). (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.

Supply and fix in repair wall mounted LED Batten, extruded Aluminium heat sink provided for efficient heat dissipation & integrated electronic driver of Lamp type: 18W LED life time of 30000* hours including lamp all as specified and as directed. Make: Philips, Cat Part No: TMC 501 p 1 X T-LED 22W P3241 & ESSENTIAL LED TUBE 1200 MM 18W865 T8 AP 1 (for Tube rod) or equivalent in Havells cat part No ENDURA LINEARNE OBS 20W LED 830SPC WH OR C&S CAT PART NO TARA-E 120W LTDC122 20W LED/WD

Supply and fix in repair wall mounted Endural LED Batten, high efficacy - 1051m/W, Short circuit & Voltage cut off protection, wide operating voltage range of 140V to 270V wide, lumen output of 4000 , System consumption should be between 36-40W including lamp all as specified and as directed. Make: Philips, Cat Part No: BN 308C LED 40S-6500 L120 PSU WH or equivalent in Havells Cat Part No- STOUTPIUS1200BS40W LED 857 SPC WH or Crompton Cat Part No-LCBI-40-TL

Supply and fix in repair wall mounting LED picture/mirror light, aluminum with silver finish, 6W complete all as specified and directed Make :- Philips Commercial code No 30973 , 12 NC code No 919215850143 or equivalent Wipro/CG/Havells

S&F in repair MCCB distribution board, TP&N , vertical , double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link,415 Volts 4 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including 3 Pole V-Tec MCCB of 100 A rating & 16kA breaking capacity, MCCB pre-fitted at factory all as specified and directed. Make: Indoasian Cat part No KSLTVM04 or equivalent in Legrand/ Havells.

Supply and fix in repair MCCB four pole , 415 Volt, 100 Amps,25 KA , adjustable thermal & fixed magnetic setting complete all as specified and directed. Make: Indoasian Cat part No: X1125S4Tor equivalent in Havells/Legrand/ ABB

Supply and fix in repair MCCB four pole , 415 Volt, 125 Amps,25 KA , adjustable thermal & fixed magnetic setting complete all as specified and directed. Make: Indoasian Cat part No: X1125S4Tor equivalent in Havells/Legrand/ ABB

Supply and fix in repair MCCB four pole , 415 Volt, 160 Amps,25 KA , adjustable thermal & fixed magnetic setting complete all as specified and directed. Make: Indoasian Cat part No: X1125S4Tor equivalent in Havells/Legrand/ ABB

Replacement of gun metal bush with suitable size, gun metal bush for ceiling fan any make, any size and sweep, complete all as specified and directed.

Replacement of unserviceable Indicator lamp round/square type suitable for geyser 25-50 liters all as per sample AC 230 Volts, complete all as specified and directed.

Supply and fixing in repair change over switch on load 415 volts TPN in sheet metal enclosure of capacity 63Amps, complete all as specified and directed.

Supply and fixing in repair change over switch on load 415 volts TPN in sheet metal enclosure of capacity 100 Amps, complete all as specified and directed.

Supply and fixing in repair Change over switch on load 415 volts TPN in sheet metal enclosure of capacity 200 Amps, complete all as specified and directed.

Supply and install in repair LED with driver decorative post top energy saving environmental friendly, long life aesthetically designed with symmetrical light distribution complete all as specified and directed Make : - Havells Cat part No RUBYPT25W LED 757PSYMTOPC or C&S Cat Part No cetus/20W LTGLC20WHPLED/W equilvent in Philips/Wipro

Supply and fixing in repair Automatic source change over with current limiter 32A 3PHASE ACCL complete all as specified and directed. Make Havells OR Equivalent in Indoasian/L&T/legrand

Supply and fix in repair LED Bulk Head light fitting ,System consumption should be between 6-10W. Similar to Philips Cat No : WT202W LED 6S NW PSU S2 PC or Havells cat part No RUGBYNE ONFT 10W LED 760 SSYMBOPC

Supply and laying in repair 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed twin core 10 sq. mm nominal cross section in service connections, complete all as specified and directed.

Supply and laying in repair 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed twin core 16 sq. mm nominal cross section in service connections, complete all as specified and directed.

Supply and fixing in replacement 1100 volts copper conductor flexible cable with PVC insulator multi-stranded 3x1.50 sqmm including connection, , complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level. connecting to the GI wire 4 mm dia by means of bolls, nuts, check nuts and washers of galvanised iron and earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and handle of 6mm dia MS bar made to shape, GI medium grade 20mm bore pipe for watering, perforated at bottom. 1.75 metre long placed on top edge of earth plate. charcoal and common salt filling with fixing arrangement, funnel wire mesh and earth work in soft soil returning filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long GI wire of size 4 mm dia with protection pipe of 15mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by (-) 14.5% (minus). (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.

Supply, installation, testing and commissioning of tamper proof single phase 230 volts AC Electronic energy meter of accuracy class-1, Digital type in Polycarbonate body conforming to IS-13779 and CBIP technical report 88 of capacity 10-40 Amps including wooden box for fixing meter and painting the wooden box of matching with existing wall colour incl dismantling of unserviceable meter and deposit to MES store yard complete all as specified and directed. Make: HPL/AE/L&T

Dismantling the old unserviceable main switch and taken as credit including supply and fix new Double break Switch fuse Unit with 03 Nos HBC fuses conforms to IS/IEC 60947-1&3 metal clad Triple pole and neutral link, 415 volt 100 Amps HRC type all as directed. Make: Standard Cat Part No: ISFNTW4100 or equivalent in Havells/ Legrand

Replacement of unserviceable auto cut switch suitable for geyser 25-50 Ltrs 230 volts AC all as per sample, complete all as specified and directed.

Replacement of unserviceable geyser assembly suitable for geyser 25-50 Ltrs 230 volts AC all as per sample, complete all as specified and directed.

Supply and fixing LED tube rod 4' long suitable for 1x18 watt light fitting, complete all as specified and directed.

M/S LATIF AHMAD BABA CONSTRUCTION

M/S AK ENTERPRISES

M/S Hilal Builders

Javeed And Co

M/S STARE BUILDERS

M/S HAFIZ AND SONS

M/S REDLY ENGINEERS