Replacement of worn out iron sheet, installation of fiber sheet and painting work of Hindon River Bridge in City Forest.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting riverts, welding etc. including dismembering and stacking within 50 metres lead. DSR-23 item No. 15.18 (5.65 x 0.735 x 111/107 = 4.31 +3%=4.43/kg)

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. DSR-23 Item No. 10.25.1 (123.60 x .735 x 111/107= 94.24 + 3% = 97.07)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture to give. DSR-23 Item No. 13.62.1 (226.25 x 735 x 111/107 = 172.51 + 3% = 177.68)

Providing and fixing retro reflactive tape 50 mm wide of 3 M make on steel surface and RCC surface with fostener 3 M high intensity reflective conspicuity tape, yellow 2 inch width X 2 feet superb night time relectivity and visibility, this ECE 104 reflective tape can be seen up to 1000 meters away at night designed for application to the painted aluminium or of steel surface of rigid sided vehicles, this high quality durable reflective tape provide superb night time visibility. it improves the safety of HGVs and will help to reduce accidents and save lives. This reflective tape is compiant with regulation UN ECE 104 and carries the mandatory e-mark which must be printed on the reflective tape to symbolize requirements of the regulation have been achived. Please note- images are for representational pupose, actual product will be as per size ordered etc all completed as per direction of engineer incharge.

Welding by gass plant including supply of all materials, labour etc. Completed. DSR-2023 Item No. 10.22 (3.70 x .735 x 111/107(2.82+3% =2.90)

Applying primer coat with ready mixed red oxide. DSR No. 23 item No. 13.50.3 (67.40 x .735 x 111/107 = 51.39 + 3% = 52.93)

Providing and fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8 mm dia. GI plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs, incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform pigmentation and thickness without air pockets and shall conform to Is 10192 and IS 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. DSR-23 Item No. 12.47(1245.66 x .735 x 111/107 =949.78 + 3% = 978.28

Deduct Mild Steel Flats upto 10 mm in thickness. DSR-23 Item No.-1008