Loading
Loading…
Loading…
Tender Value
₹2.0 Cr
EMD Value
₹4.0 L
Closing Date
15 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (RSP)
Above/Below/Par
TECH CELL
13 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V=Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB (Attached in document section of this NIT as Annexure-VIB_1.pdf) of IR Standard GCC April2022, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Tenderer(s) may carefully note that their Contract Agreement for this work is liable to be terminated at any time later, in case any of the information furnished by them is found to be untrue or any adverse point comes to light subsequently. The decision of Railway administration in this regard shall be final and binding. The balance sheet and all other financial documents attested/certified by CAs to substantiate fulfilment of Financial Eligibility Criteria should be with UDIN, failing which the offer is likely to be rejected without any further reference. (Format for and Sample format for financial data certificate, as mentioned above are attached in the document section as Annexure- VIB [Annexure-VIB_1.pdf].) (Ref: As per para Reference -Para 10.2 & 17.15.2 of Tender Form (Second Sheet) of Annexure I of ITT of Indian Railways Standard General Conditions of Contract GCC April 2022 with its all latest amendments/ correction slips)
The tenderer must have successfully completed any of the following categories of work(s) during last 07(seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. Definition of similar work: "Manufacture/refurbishing of any type of Railway coaches (including departmental coaches locomotives / DEMUs / EMUs/MEMUs/Meter gauge coaches / Aircrafts / ships /Volvo Buses Or Manufacture of wagons having experience of Manufacturing /refurbishing of any type of Railway Coaches /DEMUs / Metro Coaches"."
32 conditions · 6 needing a document upload
The tender shall submit the following documents for their credential.
Bid Security: Payment receipt of Bid Security submission.
The bidder who claims exemption of Bid Security Deposit shall submit documentary evidence for the same as mentioned 1.1.1 above. Without such documentary evidence, their offer will lead to summarily rejection of their offer.
The bidders who do not claim exemption to Bid Security Deposit shall submit the documentary evidence of Bid Security deposit.
Documentary evidence in support of Special Financial Criteria
For all the tenders having advertised cost of Rs 10 lakh or above, the contractor shall have the option to take payment from Railways through a letter of credit (LC) arrangement as per RB's letter No.2018/CEI/CT/9, dated:04.06.2018 copy of which is enclosed in Document Section.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Refurbishing of Railway Coaches.(Corrosion Repair of Coaches, Furnishing activities including stripping and laying of PVC of ICF coaches during POH, Strip, Repair & Fitment of Coach Doors during POH, Dismounting & Transportation (to and fro movement i.e. nominated Coach to concerned Shop & concerned shop to nominated Coach at After dismounting and again after overhauling work completed by Railway ) of Buffer assembly and Stripping, Dismantling and Transportation of Draw gear arrangement with screw coupling in ICF coaches and handing over to concerned sections as per Details scope of work & Special Condition of Contract as attached)
RefurbishingICF250-1~SER
RefurbishingICF250-1
Open
Works - General
12 Months
Paschim Medinipur, West Bengal
₹0
₹4.0 L
15 Apr 2026
20 Mar 2026
1 Apr 2026
75 items across 5 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 69,94,992.5 | ||
| — | 250.00 | — | — | ||
| Cost of "Removing of Head Stock assembly & finishing surface by oxi-act. Gas cutting" | — | — | — | 94,632.5 | |
| — | 250.00 | — | — | ||
| Cost of "Fitting & welding of Head Stock with Under Frame members and New End Stanchion pillars by MAG/MMAW welding" | — | — | — | 2,60,505 | |
| — | 1500.00 | — | — | ||
| Cost of "Removing of Sole Bar by Oxi-act gas cutting and finishing of surface" | — | — | — | 6,25,215 | |
| — | 1500.00 | — | — | ||
| Cost of "Fitting and welding of new sole bar with under frame members by MAG/MMAW welding." | — | — | — | 15,63,045 | |
| — | 750.00 | — | — | ||
| Cost of "Fitment of step sheets door pillar (Falca) with footstep & doorway angle and welding with MAG/MMAW (in sets)." | — | — | — | 1,10,407.5 | |
| — | 250.00 | — | — | ||
| Cost of "Mounting of Battery boxes frame with hole." | — | — | — | 47,315 | |
| — | 2500.00 | — | — | ||
| Cost of "Removing of turn under and cleaning of surface by Oxy-Acty. Gas cutting." | — | — | — | 1,07,575 | |
| — | 2500.00 | — | — | ||
| Cost of "Fitment of turn under and MAG/MMAW welding with sole bar and adjacent turn under and end profile plates." | — | — | — | 2,15,050 | |
| — | 7500.00 | — | — | ||
| Cost of "Removing of body part pillars and finishing of surface by oxi-act. Gas cutting." | — | — | — | 1,41,900 | |
| — | 7500.00 | — | — | ||
| Cost of "Fitting and welding of new body part pillars with sole bar and Z extension pillars by MAG/MMAW welding." | — | — | — | 2,83,725 | |
| — | 250.00 | — | — | ||
| Cost of "Removing of End panels & fitting and welding of new panels & required size with MAG/MMAW welding (both end) and finishing of end walls. Up to standard length." | — | — | — | 1,18,287.5 | |
| — | 250.00 | Per Coach | — | ||
| Cost of "Cutting of side panels / corners for checking of corrosion purpose or for replacement." | — | — | — | 1,38,587.5 | |
| — | 5500.00 | — | — | ||
| Cost of "Fitment of pressed body side panels of required size & weld with old upper side panels, body pillars, body pillar support angle strup & turn under with MAG/MMAW welding (in whole coach both side with corners)." | — | — | — | 7,07,575 | |
| — | 500.00 | — | — | ||
| Cost of "Cutting of U/square channels of Lavatory frame to a standard height, by oxi- act gas cutting and arc tag welding of new channels. (Including of one lavatory's frame whole channels)." | — | — | — | 1,36,450 | |
| — | 1000.00 | — | — | ||
| Cost of "Replacement of floor bearers / cross bar on RCF / ICF type coaches." | — | — | — | 1,36,440 | |
| — | 250.00 | Per Coach | — | ||
| Cost of "Initial cambering and welding of supports underneath of coach floor for head stock, sole bar & other repair." | — | — | — | 2,51,042.5 | |
| — | 250.00 | Per Coach | — | ||
| Cost of "Final cambering and cutting of supports underneath of coach floor from head stock and cross bars" | — | — | — | 2,51,042.5 | |
| — | 250.00 | — | — | ||
| Cost of "Removing of old trough floor by oxi/act gas cutting and finishing of surface." | — | — | — | 63,072.5 | |
| — | 250.00 | — | — | ||
| Cost of "Fitting and welding of new trough floor with under frame members and old trough floor with provision of floor modification strip by MAG/MMAW welding." | — | — | — | 94,820 | |
| — | 1000.00 | — | — | ||
| Cost of "Welding of new Lifting Pad and gussets with MAG/MMAW welding." | — | — | — | 2,58,340 | |
| — | 1000.00 | — | — | ||
| Cost of "Removing of oxy-act, cutting & fitment / repair of end satanchions pillar and weld with MAG/MMAW." | — | — | — | 4,16,990 | |
| — | 500.00 | — | — | ||
| Cost of "Removing by oxy-act. Cutting & new fitment / repair of solebar boxing / stiffner and weld with sole bar and adjacent items by MAG/MMAW." | — | — | — | 5,55,985 | |
| Cost of "Repair of sheet partition frame (Cutting / repair and welding of U square channels)" | — | 500.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .