West Bengal Sdc

Cancelled

Works

CIVIL WORKS

Emergent repairing of potholes of Balarampur VR_Sl. 1

Public Works Department

Coochbehar, West Bengal

Amount: ₹9.9 LCloses: 29 Aug 2026Closed

Timeline

Published21 Aug 2026
Closed29 Aug 2026
Cancelled8 Sept 2026

Cancellation Details

Cancellation of Tender

Cancellation of TenderEmergent repairing of potholes of Balarampur VR_Sl. 1Reason: Minimum Bids Not ReceivedDocument: cancelled_1.pdf

Published 8 Sept 2026

Tender Value

₹9.9 L

EMD Value

₹19,799

Closing Date

29 Aug 2026, 12:00 pmClosed

Tender Inviting Organisation

Name

EXECUTIVE ENGINEER PWD COB DIVN

Address

OFFICE OF THE EXECUTIVE ENGINEER, PWD, COOCH BEHAR DIVISION SUNITY ROAD, COOCH BEHAR, PIN- 736101

Work Description

Emergent repairing of potholes of Balarampur VR from 4.00 km to 6.70 km under Dinhata Sub-Divisision, P.W.D. under Cooch Behar Division, PWD in the District of Cooch Behar during 2026 - 27.

Tender Information

Tender ID

2026_WBPWD_5018990_1

Reference Number

WBPWD/EE/COB_DIVN/NIT_18/26_27

Tender Type

Open Tender

Product Category

CIVIL WORKS

Form of Contract

Percentage

Period of Work

15 days

Location

COOCHBEHAR

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

5 documents required · 5 mandatory

Fee/PreQual/Technical

RequiredNIT (.pdf)

RequiredWBF_2911 (.pdf)

RequiredEMD (.pdf)

RequiredOID (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

EMD Fee Amount

₹19,799

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

8 Sept 2026

Published

21 Aug 2026

Bid Opening

31 Aug 2026

Download Starts

21 Aug 2026

Download Ends

29 Aug 2026

Submission Starts

21 Aug 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (5 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Tack Coat Providing and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503). i)On bituminous surface @ 0.20kg - 0.3kg /sqm.	1	Sq.M	28.33	₹28.3
2	Open - Graded Premix Surfacing Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen of approved grade to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled tandem or other approved type roller 8-10 tonne capacity, finished to required level and grades (Reference to MORT&H's specification clause 510).	1	Sq.M	277.32	₹277.04
3	Seal Coat Providing and laying of premix sand seal coat with HMP using approved crushed stone chipping and viscosity grade paving bitumen of suitable approved grade. Type - B	1	Sq.M	99.63	₹99.53
4	Repairing Pot-holes with Bituminous Macadam (Grading - II, for compacted thickness of upto 75mm) Filling Pot Holes with Bituminous Macadam using Mobile Hot Mix plant (6-10 TPH) with approved crushed aggregates of specified grading premixed with bituminous binder @3.4% by wt. of the total mix, transported to site and laid in the pot hole prepared before hand by cutting the edges to get a firm vertical face and by removing all the failed and loose materials including dust and applying tack coat evenly on the sides and on the surface as per specification, rolling the filled depression with 8-10 tonne smooth wheeled roller to achieve the desired compaction, including the cost and carriage of stone aggregates and bitumen, hire charges of machinery and equipment, cost of fuel and lubricants and wages of all operational staff, quality control except the cost of tack coat complete as per direction of Engineer-in-charge. Payment to be made on the basis of the loose net volume of the stone aggregates used in the work.	-	Cu.M	10,105.51	-
5	ADD GST @ 18.00% ON SUM OF AMOUNT Sl-01 to SL-4	-	GST	0.18	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Cancellation Documents

cancelled_1.pdf

pdf • 0.12 MB

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.14 MB

Work Item Documents

WBF_2911.pdf

Tender Documents • 0.77 MB

BOQ_5090963.xls

BOQ • 0.50 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Tack Coat Providing and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503). i)On bituminous surface @ 0.20kg - 0.3kg /sqm.

Sq.M

28.33

₹28.3

Open - Graded Premix Surfacing Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen of approved grade to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled tandem or other approved type roller 8-10 tonne capacity, finished to required level and grades (Reference to MORT&H's specification clause 510).

Sq.M

277.32

₹277.04

Seal Coat Providing and laying of premix sand seal coat with HMP using approved crushed stone chipping and viscosity grade paving bitumen of suitable approved grade. Type - B

Sq.M

99.63

₹99.53

Repairing Pot-holes with Bituminous Macadam (Grading - II, for compacted thickness of upto 75mm) Filling Pot Holes with Bituminous Macadam using Mobile Hot Mix plant (6-10 TPH) with approved crushed aggregates of specified grading premixed with bituminous binder @3.4% by wt. of the total mix, transported to site and laid in the pot hole prepared before hand by cutting the edges to get a firm vertical face and by removing all the failed and loose materials including dust and applying tack coat evenly on the sides and on the surface as per specification, rolling the filled depression with 8-10 tonne smooth wheeled roller to achieve the desired compaction, including the cost and carriage of stone aggregates and bitumen, hire charges of machinery and equipment, cost of fuel and lubricants and wages of all operational staff, quality control except the cost of tack coat complete as per direction of Engineer-in-charge. Payment to be made on the basis of the loose net volume of the stone aggregates used in the work.

Cu.M

10,105.51

ADD GST @ 18.00% ON SUM OF AMOUNT Sl-01 to SL-4

GST

0.18