Loading
Loading…
Loading…
Tender Value
₹72.2 L
EMD Value
₹1.4 L
Closing Date
13 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
ELECT GEN
15 conditions · 4 needing a document upload
Only those firms which in their individual capacity, satisfy Standard Financial Criteria(s) need to quote for this tender. :The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-15, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. The tenderers shall submit Certificates to this effect which may be an attested Certificate from the concerned department / client and/or Audited Balance Sheet duly certified by the Chartered Accountant etc.
The tenderers must submit the copy of valid Electrical contractor license along with their offer. Offer shall be rejected summarily, if tenderer does not have valid Electrical contractor license on the name of an individual / Proprietor / Partner / firm issued by the State / Central government.
As a proof of Technical Eligibility, the Tenderer(s) have to submit details (Technical Eligibility) as per Annexure-13 Tender Document, indicating that Contractor have completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender. Format of completion certificate to be produced is provided as annexure-18 of tender docuemnts. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificate issued by any Govt. Organization, work experience certificate issue by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated /registered at least 5 years prior to the date of opening of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Definition of Similar Work: Similar work is defined as under: "Wiring, Rewiring in Buildings with associated electrical works or Lighting arrangement in buildings, circulating area, yard streets etc with associated electrical works or Wiring/ Rewiring, Lighting arrangement in buildings with associated electrical works."
31 conditions · 7 needing a document upload
GSTIN number: Bidder shall submit attested or self attested copy of GSTIN certificate.
Following documents shall be submitted by the tenderer: (A)SOLE PROPRIETOR SHIP FIRM: (i)All other documents in terms of clause 1.1.12 of tender document . (B)HUF: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii)All other documents in terms of clause 1.1.12 of tender document. (C)PARTNERSHIP FIRM:(i)A notarised copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii)A notarised or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm.(iii)An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract.(iv)All other documents in terms of clause 1.1.12 of tender document . (D)JOINT VENTURE (JV): APPLICABLE ONLY FOR WORKS COSTING MORE THAN Rs.10.00 Cr. Not applicable for this tender. (E)Company registered under Companies Act- 2013:(i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company.(ii)A copy of Certificate of Incorporation.(iii)A copy of Authorization / Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company.(iv)All other documents in terms of clause 1.1.12 of tender document. (F)LLP (Limited Liability Partnership) Firm under LLP Act-2008: (i)A copy of LLP Agreement.(ii)A copy of Certificate of Incorporation.(iii)A copy of Power of Attorney / Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP.(iv)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (G)Registered Society & Registered Trust: The tenderer shall submit: (i)A copy of the Certificate of Registration.(ii)A copy of Memorandum of Association of Society/Trust Deed.(iii)A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust.(iv)A copy of Rules & Regulations of the Society.(v)All other documents in terms of clause 1.1.12 of tender document .
The tenderer shall submit a copy of certificate (Annexure 19(A)) in case of other than Company/Proprietary firm by each member of a Partnership Firm / Joint Venture (JV) / Hindu Undivided Family (HUF / Limited Liability Partnership (LLP) etc, as the case may be. Non submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatory incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document. Note:- As per railway board letter No. 2022/CE-I/CT/GCC Correspondence Dated: 14.05.2024 "On IREPS Module, a facility has already been created for online submission of Annexure-V. Therefore, the provision of downloading of Annexure-V of GCC & uploading of physically signed Annexure-V by the tenderer had been discontinued on IREPS".
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Payment of Bid-security in respect of E- tendering will be deposited either in cash through e payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure-VIA of GCC Works 2022 and shall be valid for a period of 90 days beyond the bid validity period and any offer without the same will be treated as invalid. Details of bank account no. and technical details have been provided for in the software (IREPS) to which prospective registered tenderers will have access at the time of tendering.
In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: (i) A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. (ii) The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids (i.e. excluding the last date of submission of bids). (iii) Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. (iv)The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. (v)The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected. (vi)The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right-hand top corner of the envelope. (vii)The envelope shall be addressed to the officer and address as mentioned in the tender document. (viii) If the envelope is not sealed and marked as instructed above, the Authority assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.
PAN CERTIFICATE : PAN The tenderer shall submit the photocopy of Permanent Account Number (PAN) issued by Income Tax authority attested by Gazetted officer / self attested.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Any typographical error shall not be construed to be benefit of the contractor; in such cases the interpretation and decision of Sr. DEE/G/JAT shall be final and binding upon the tenderer.
The tenderer shall study the Northern Railway General Conditions of Contract Regulations for Tenders & Contracts - 2022 or latest along with tender documents before submission of the tender.
Applicable charges/recoveries/Advance etc. (Deployment of Technical supervisors per attached Annexure XIII) is applicable.
There is an option of payment to contractor through a letter of credit (LC) arrangement (Authority Railway Board's letter no. 2018/CE-I/CT/9 dated 04.06.2018) as given in clause 1.3.14 of tender document.
GCC works 2022(or latest if any) should be the integral part of this tender.
GCC Correction Slip 11 has been issued by Rly Board. The conditions of Correction Slip will be applicable over previous versions.
Electrical Work in c/w Provision of alternative Control Office in JAT Division'
251-J-Elect-T-26-2025-26~NR
251-J-Elect-T-26-2025-26
Open
Works - General
6 Months
Jammu, Jammu And Kashmir
₹0
₹1.4 L
13 Apr 2026
20 Mar 2026
30 Mar 2026
101 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 72,24,200.19 | ||
| — | 50.00 | — | — | ||
| Supply and Erection of modular metal boxes concealed boards with white finish single mounting plate and fixing of switches/plug socket and connection wiring. Make Legrand (Myrius), Schneider (Zencelo), Anchor (Ave) or similar. Metal boxes boards are to be concealed in the wall for 12 Module | — | — | — | 19,404.5 | |
| — | 50.00 | — | — | ||
| Supply and Erection of modular metal boxes concealed boards with white finish single mounting plate and fixing of switches/plug socket and connection wiring. Make Legrand (Myrius), Schneider (Zencelo), Anchor (Ave) or similar Metal boxes boards are to be concealed in the wall for 8 Module | — | — | — | 17,346.5 | |
| — | 40.00 | — | — | ||
| Supply and Erection of modular metal boxes concealed boards with white finish single mounting plate and fixing of switches/plug socket and connection wiring. Make Legrand (Myrius), Schneider (Zencelo), Anchor (Ave) or similar Metal boxes boards are to be concealed in the wall for 6 Module | — | — | — | 14,800 | |
| — | 30.00 | — | — | ||
| Supply and Erection of modular metal boxes concealed boards with white finish single mounting plate and fixing of switches/plug socket and connection wiring. Make Legrand (Myrius), Schneider (Zencelo), Anchor (Ave) or similar Metal boxes boards are to be concealed in the wall for 4 Module | — | — | — | 5,232.9 | |
| — | 600.00 | — | — | ||
| Supply, fixing, testing, and commissioning of modular type switch 6/10 Amps as per tech. specification IS/IE rules and site requirment. | — | — | — | 97,170 | |
| — | 50.00 | — | — | ||
| Supply, fixing, testing, and commissioning of modular type switch 16 Amps as per tech. specification IS/IE rules and site requirment. | — | — | — | 9,672 | |
| — | 50.00 | — | — | ||
| Supply, fixing, testing, and commissioning of modular type 6 pin socket 6/15 Amps as per tech. specification IS/IE rules and site requirment. | — | — | — | 13,205 | |
| — | 120.00 | — | — | ||
| Supply, fixing, testing, and commissioning of modular type multi socket 6 Amps 5 pin as per tech. specification IS/IE rules and site requirment. | — | — | — | 17,892 | |
| — | 5000.00 | — | — | ||
| Wiring for light points with supply and laying of FRLS PVC insulated multistranded copper conductor cable 1100 Volt 1.5 Sq.mm multi stranded confirming to IS-694 latest in the existing PVC pipe. | — | — | — | 70,750 | |
| — | 4000.00 | — | — | ||
| Supply, laying, fixing,testing and commissioning of 2.5sq mm FRLS, PVC insulated multistranded copper conductor single core cable 1100 Voltsconfirming to IS-694(latest version),make Finolex,Havells, Polycab, KEI or equivalent in the existing PVC conduit for wiring of point wiring/circuit wiring/sub main/main as perTech Spec-I attached, IS & IErules. | — | — | — | 72,920 | |
| — | 3500.00 | — | — | ||
| Supply, laying, fixing, testing and commissioning of 4 sq mm FRLS, PVC insulated multistranded copper conductor single core cable 1100 Volts confirming to IS-694(latest version),make Finolex, Havells, Polycab, KEI or equivalent in the existing PVC conduit for wiring of point wiring/circuit wiring/sub main/main as perTech Spec-I attached, IS & IE rules. | — | — | — | 91,315 | |
| — | 3000.00 | — | — | ||
| Supplying, laying, testing and commissioning of FRLS 6 Sq mm PVC insulated multistranded copper conductor s/core cable1100 Volt conforming to IS-694 (latest version), make Finolex, Havells, Polycab, KEI or similar in the recessed PVC conduit pipe 20 mm dia as required at site. | — | — | — | 1,27,500 | |
| — | 3000.00 | — | — | ||
| Supply and recessing/fixing of 25mm (Medium) PVC conduit pipe conforming to IS 9537/Pt.III/1983 or Latest Version with accessories,junction box, etc including making chase, plastering/clamping etc as per technical specifications. | — | — | — | 1,15,830 | |
| — | 100.00 | — | — | ||
| Supply and erection of 36 W recess type LED light fitting (2x2 ft) complete with control panel & all accessories including connection with 2x2.5 sq.mm PVC insulated multi stranded FRLS copper conductor cable, testing,commissioning &earthing equired and as per CEE/NR specification No. CEE/NR/121- Elect/PS/2018 (Rev.03) dated 28.06.2018 & CEE/NR/121- Elect/PS/2019 (Rev.4) dated04.11.2019 or latest | — | — | — | 4,36,621 | |
| — | 45.00 | — | — | ||
| "Supply and erection of 45 W LED Street light fitting operating voltage single phase 230 volts AC, 50Hz complete with all accessories as per CEE/NR Specification No.CEE/NR/121 Elect/PS/2018 (Rev '3') Dated 28.06.2018 & CEE/NR/121-Elect/PS/2019 (Rev.4) dated 04.11.2019 or latest, including connection with 2x2.5 sq.mm PVC insulated multi stranded FRLS copper conductor cable, testing, commissioning & earthing required as per specification" | — | — | — | 1,53,251.55 | |
| — | 50.00 | — | — | ||
| Supply, fixing, testing and commissioning of LED tube light system wattage 18 Watt to 20 Watt complete with all mounting arrangement & accessories & flexible copper wire for connection from ceiling rose as per ISS/IR rules & site requirement as per CEE/NR Specification No.CEE/NR/121 Elect/PS/2018 (Rev '3') Dated 28.06.2018 & CEE/NR/121 Elect/PS/2019 (Rev.4) dated 04.11.2019 or latest, | — | — | — | 27,882.5 | |
| — | 40.00 | — | — | ||
| Supply, fixing, installation, testing and commissioning of energy efficient 230V,50 Hz AC ceiling fan size of 1200 mm sweep having wattage of 28 W, range of voltage operation at various speed-120 to 260 V AC with 5 step speed control electronic regulator, copper winding complete as per IS : 374-1979 or latest IE rule & site requirement. Make Bajaj, Usha, Havells, Crompton, Orient or equivalent. | — | — | — | 1,17,669.6 | |
| — | 50.00 | — | — | ||
| Supply, fixing, testing and commissioning of Bracket fans wall mounting of size 450 mm (18 inches). Make: Bajaj, Khaitan, Crompton or equivalent 230 Volts, 50 Hz AC supply. | — | — | — | 1,36,075 | |
| — | 100.00 | — | — | ||
| Supply, fixing,testing and commissioning of 3-pin ceiling rose 5 Amp capacity on existing MS/PVC conduit junction boxes/casing caping Anchor, Cona, Kinjal, SSK or equivalent as per IS, IE rules and site requirement. | — | — | — | 1,277 | |
| — | 10.00 | — | — | ||
| Supply & erection of 5M pole with single arm bracket hot dip galvanized octagonal pole with top 70 mm and bottom 130 mm around face made of 3 mm thick, steel base plate size 200x200x12 mm complete with appropriate sleeve at the top of the pole for mounting arm bracket 300 mm long suitable for LED street light fittings including casting, muffing with cement concrete foundation (1:2:4) painting, earthing and foundation GI nut, bolts with washer and smart pack junction box with single pole MCB and terminals as per explanatory note | — | — | — | 80,059 | |
| — | 10.00 | — | — | ||
| Supply & erection of 5M pole with double arm bracket hot dip galvanized octagonal pole with top 70 mm and bottom 130 mm around face made of 3 mm thick, steel base plate size 200x200x12 mm complete with appropriate sleeve at the top of the pole for mounting arm bracket 300 mm long suitable for LED street light fittings including casting, muffing with cement concrete foundation (1:2:4) painting, earthing and foundation GI nut, bolts with washer and smart pack junction box with single pole MCB and terminals as per explanatory note | — | — | — | 1,01,313.3 | |
| — | 10.00 | — | — | ||
| Supply and fixing of bracket on pillar or as required made out of GI pipe 1 M 40mm dia class B GI pipewith ISI marked of approved make & shape suitable bracket shall be fixed with double clamp made of 40x5 mm GI clamp & suiatable GI nut bolt & washer & as per explanatory note & as per site | — | — | — | 4,823.3 | |
| — | 10.00 | — | — | ||
| Supply and providing of Maintenance Free Earthing with primary MS conductor 40 mm dia 3000 mm long and secondary MS Electrode 80 mm dia 3000 mm long including digging pit of size 5ft.x5ft.x10ft. and using earth enhancement chemical compound minimum 75 kg. Per pit suitable for 40 KA current capacity and as per RDSO specification No. RDSO/PE/SPEC/PS/0109(REV- 0)-2008 and as per explanatory note. | — | — | — | 1,43,503.3 | |
| — | 100.00 | — | — | ||
| Connection with GI strip 300mm deep in ground/recessing in floor/clamping in Trenches of sub station by grouting clamps manufacture with MS sheet 14 SWG, from earth electrode strip to HT panel/LT panel/AMF panel/Transformer/DG set etc. as per approved drawing and technical specification including supply of material, of size: 40 X 5 mm | — | — | — | 13,850 | |
| — | 4.00 | — | — | ||
| Earthing with 600x600x3mm thick copper plate earth electrode as per IS 3043(Latest version), to achieve earth resistance less than one ohm, including construction of masonry enclosure with hinged cover plate of cast iron with locking arrangement (Approx. size 600x600mm) on top, watering pipe, connections from earth plate to top with 40x6mm copper strip in 50mm dia GI pipe class 'B' provision of earth plate as per drawing and technical specification. | — | — | — | 15,921.44 | |
| — | 40.00 | — | — | ||
| Connections with 40x6mm copper strip in 50mm dia G.I. pipe class-B, 300 mm deep in ground/recessing in floor from earth electrode strip to neutral of transformer/alternator as per drawing and technical specification. including supply of material. | — | — | — | 29,452.8 | |
| — | 10.00 | — | — | ||
| Earthing arrangement by providing earth electrode of GI pipe 50 mm dia (B class) 4.5 meter long with flange including 6 SWG GI earth wire from earth pipe to connecting point on switch board to distribution board/pole etc. as per site requirement including masonry enclosure as per Tech specification at annexure 'A' relevant ISS & IE rules and site requirements. A suitable CI/MS/RCC cover as approved by Rly . Representative, cover with locking arrangement shall be provided. | — | — | — | 22,315.8 | |
| — | 100.00 | — | — | ||
| Supply & recessing/fixing on surface 6 SWG GI wire for loop earthing as required as mentioned in explanatory note. | — | — | — | 1,002 | |
| — | 1200.00 | — | — | ||
| Transportation, Laying, underground/road/Railway track, recessing in platform /wall along with Rly. Track/in laid RCC/GI pipe as required 1.1 KV grade LT XLPE insulated armoured, aluminium conductor cable including making chase & plastering after laying of cable/digging of cable trench, sand cushioning, protective covering with second class bricks, provision of cable route marker as per Tech. Specification including end terminations with Aluminium Clamping socket/lugs, testing and commissioning of Above 25 sq.mm | — | — | — | 71,208 | |
| — | 500.00 | — | — | ||
| Transportation, Laying, underground/road/Railway track, recessing in platform /wall along with Rly. Track/in laid RCC/GI pipe as required 1.1 KV grade LT XLPE insulated armoured, aluminium conductor cable including making chase & plastering after laying of cable/digging of cable trench, sand cushioning, protective covering with second class bricks, provision of cable route marker as per Tech. Specification including end terminations with Aluminium Clamping socket/lugs, testing and commissioning of Upto 25 sq.mm | — | — | — | 28,555 | |
| — | 200.00 | — | — | ||
| "Supply & laying of HDPE pipe of 80mm dia, wall thickness 3.6 to 4.1mm. The work involves laying of cable in HDPE pipe as per specification." | — | — | — | 26,964 | |
| — | 200.00 | — | — | ||
| Digging and filling of trench size 0.4 x 0.8 meter (trench work may be on kuchha/pucca land and all type of soil as per site requirment and without protective layer of brick) surface on trench shall be made good in all respect and satisfaction of site engineer as per specification. | — | — | — | 10,386 | |
| — | 40.00 | — | — | ||
| Supply, installation and commissioning of light weight wall mounted voltage stabilizer confirming to IS: 8448 suitable with toroidal care transformer having capacity 5 KVA, Input Voltage 135-290V and output voltage 220-240 V, MCB 32 Amps, time delay relay (2-4 min) with soft touch type instant and start switch, under voltage and over voltage cut off with indicators, Digital Voltmeter and Ammeter with soft type selector switch for measuring input & output voltage, indicator for power ON and timer ON. IS 8448 Latest version/Make Microtek, V-Guard or equivalent with RDSO/ISO/BIS/equivalent certification | — | — | — | 2,63,779.6 | |
| — | 300.00 | — | — | ||
| Supply and laying of 22 SWG Copper pipe 5/8 - 3/8 inch or 3/8 1/2 - 5/9 inch dia as per site requirement. | — | — | — | 2,08,935 | |
| — | 400.00 | — | — | ||
| Supply and laying of threaded PVC 3/8 inch dia as per site requirement. | — | — | — | 41,100 | |
| — | 40.00 | — | — | ||
| Supply, fixing, testing and commissioning of surface mounted / flush type 25 Amp power unit complete with modular plate, MCB, starter, plug & socket for AC of make Wipro North West (Model - ACPU6MBT/ ACPU6M-FT) or equivalent as per IS & IE rules. | — | — | — | 23,463.6 | |
| — | 1.00 | — | — | ||
| Design, manufacture as per IS 3427/ 1993 or latest and supply of 11 KV HT Switch Board 350 MVA, 630 A Capacity comprising Voltmeter and Digital Ammeter, clustered LED type of 1 No. Incoming 3 Pole motorized Vacuum Circuit Breaker conforming to IS 13118 or latest complete with 110volts, AC motor operated mechanism, PT 11KV/110V conforming to IS 3156 Part I & II/1992 (latest version) double ratio current transformer (100/50/5+5) conforming to IS 2705 Part I to III (latest version) digital ammeter & Voltmeter, numerical type 2 O/C + E/f - IDMT Relays with high set selector switch, clustered LED type indication light and suitable cable and termination box. 2 Nos. Outgoing HT panel complete with motorized 3 pole Vacuum Circuit Breaker conforming to IS 13118 or latest, 110volts , AC motor operated mechanism, tripping /closing coil , digital ammeter, clustered LED indication light double ratio copper wound current transformer 60/30/5+5 conforming to IS 2705/ Pt. I & III (latest version), numerical relays 2 O/C + E/f - IDMT with high set selector switch, clustered LED type indication light, selector switch and suitable cable, end termination box and as per explanatory note & drawing approved by Railway including erection, testing & commissioning. | — | — | — | 14,37,929.33 | |
| — | 200.00 | — | — | ||
| Laying of cable underground through 160mm dia HDPE pipe by MicroTunneling cable laying method including supply and jointing of HDPE pipe | — | — | — | 3,49,420 | |
| — | 1000.00 | — | — | ||
| "Laying underground/ under Railway track/ clamping with erectedpole/ in laid RCC /GI pipe as required, testing and commissioning of 70 to 120 sq.mm 11 KV XLPE (E) insulated armoured aluminium Conductor 3 core cable including digging of cable trench, sand cushioning protective covering with second class bricks on top and sides provision of cable route marker and filling of cable trench with excavated earth etc. after laying of cable as required as site and as per explanatory note. Note: Cable will be supplied by the Railway from the Store of SSE/ P" | — | — | — | 1,02,690 | |
| — | 4.00 | — | — | ||
| End termination of 3 core 120 sq.mm XLPE insulated 11KV (E) aluminium conductor cable with heat shrinkable outdoor type cable jointing box conforming to relevant IS including supply of required material & testing & commissioning. | — | — | — | 29,781 | |
| — | 1.00 | — | — | ||
| Supply, fixing, testing and commissioning of 11KV 200Amp Gang operated switch to be provided on erected 'H' pole structurce complete with GI operating handle with locking arrangements, insulators, droop out type fuses and all other accessories as per relevant specification & explanitory notes | — | — | — | 32,936.77 | |
| — | 1.00 | — | — | ||
| Supply, fixing and testing of non-linear resistance, distribution type lightning arrester, suitable to work on AC, three phase, 11KV, 50 Hz system of capacity 9 KV and 5 KA, conforming to IS No:3070 part-I (1993). The lightning arrester shall be fixed with suitable GI clamps using GI bolts of adequate sizes with nuts and washers. The earth terminals shall be effectively earthed using GI wire / flat of appropriate size as required at site. (Note: One set comprises of 3No's).11KV. | — | — | — | 4,183.64 | |
| — | 1.00 | — | — | ||
| Supply, fixing, testing and commissioning of H pole made of two Prestressed Cement Concrete (PCC) poles of 9M long with 4 nos. MS channel size 100x50x6mm of 2.7 mtr long 2 nos MS channel size 100x50x6mm 3 mte long. Clamp made of MS flate size 50x6mm 1no. danger plate, barbed wire app. 10mtr with earting as per IE rules and as per explanatory note | — | — | — | 25,474.7 | |
| — | 1.00 | — | — | ||
| "Design , Manufacture, supply, erection, testing & commissioning of outdoor type 15 Panel LTswitch board suitable for 3 Phase, 4 wire 415 Volts, ACsupply system comprising with: (i) Incoming ACB 4 Pole 800Amp with microprocessor release (MDOtype) = 2No. (ii) Bus coupler ACB 1600 A 4 Pole (FixedTypeManually Operated) - 1 No. (iii) Outgoing MCCB 4Pole 400 A 35 KA B/C =4Nos. (iv) Outgoing MCCB 4Pole 250 A 35 KA B/C =6 Nos. (v) Outgoing MCCB 4 Pole 125A 35 KA B/C =2 Nos. (vi) Changeover switch 800 Amps.= 1 No.The panel shallbecomplete with 1600 ACopper Bus Bars forPhasesand 800 A forNeutral, 3 phase4 wire415 V electronicdigitalpanel Ampere Meter&kWH meter on eachoutgoingfeeder etc. andas perexplanatory noteandVoltmeter on eachincomingfeeder as pertechnicalspecification." | — | — | — | 16,99,904.26 | |
| — | 4.00 | — | — | ||
| Supply, erection, testing and commissioning of the following Double door wall mounted Pre-fabricated L.T. Distribution Boards of approved make, as per explanatory note & comprising; (i) Incoming MCCB 4Pole 63 A 35 KA B/C - 1 No. (ii). Outgoing MCB 6 to 32 A. SP 10 KA B/C (4 Nos. On each Phase) - 12 Nos. | — | — | — | 58,247.96 | |
| — | 2.00 | — | — | ||
| Supply, erection, testing and commissioning of the following Double door wall mounted Pre-fabricated L.T. Distribution Boards of approved make, as per explanatory note & comprising; (i) Incoming MCCB 4Pole 125 A 35 KA B/C - 1 No. (ii). Outgoing MCB 6 to 32 A. SP 10 KA B/C (7 Nos. On each Phase) - 15 Nos. | — | — | — | 32,042.76 | |
| — | 8.00 | — | — | ||
| Supply, erection, testing and commissioning of the following Double door wall mounted Pre-fabricated L.T. Distribution Boards of approved make, as per explanatory note & comprising; (i) Incoming MCB 40 A DP 10 KA B/C - 1 No. (ii) Outgoing MCB 16 A. SP 10 KA B/C - 6 Nos. | — | — | — | 28,416.32 | |
| — | 1.00 | — | — | ||
| "Supply, erection/fixing of Safety Items complete with : (a) Fire Extinguisher, dry chemical powder type (ISI marked) suitable for electric fire 10 Kgs. Capacity - two nos. (b) GI Fire buckets of 24 gauge fitted on steel stand as per approved drawing, each 10 Ltr. Capacity filled with clean dry ordinary sand - 06 nos. (c) First Aid Box with medicines of approved make - 01 no, (d) Electric shock treatment chart (Larger size) with Aluminium frame and glass on front or laminated as approved - 02 nos. (e) 11 kV/415 V danger plate conforming relevant IS- 08 nos. (f) Schematic diagram of HT/LT installation screen printed on Hylem sheet with aluminum frame. Approximate size 1200x600 mm - 01 no. (g) Data's of transformer screen printed on Hylum sheet with Aluminium frame as size 900x600mm (approx) - 02 nos. " | — | — | — | 16,708.23 | |
| — | 2.00 | — | — | ||
| "Supply, erection, testing and commissioning of Online UPS 5 KVA Capacity ,IGBT based with inbuilt isolation transformer ,SINGLE PHASE /THREE PHASE INPUT and Single Phase Output backup of 120 minutes , minimum VAH 16000 , Input voltage range 160-280 Volts , suitable for the use of Railway PRS/UTS centre , MINIMUM WARRANTY 2 YEARS " | — | — | — | 4,80,000 | |
| — | 1.00 | — | — | ||
| FABRICATION, SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF APFC PANEL WITH CUBICAL/ MODULAR CONSTRUCTION FLOOR MOUNTING DUST AND VERMIN PROOF OF CAPACITY 100 KVAR WITH HARMONIC BLOCK REACTOR HAVING MINIMUM 08 STAGES. THE APFC PANEL SHALL BE AS PER THE DETAILED DESCRIPTION ENCLOSED IN THE ANNEXURE. | — | — | — | 2,94,018.53 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCACS11.pdf
ATTACHMENT
GCC2022.pdf
ATTACHMENT
ACS1.pdf
ATTACHMENT
ACS2.pdf
ATTACHMENT
ACS3.pdf
ATTACHMENT
ACS4.pdf
ATTACHMENT
ACS5.pdf
ATTACHMENT
ACS6.pdf
ATTACHMENT
2024_05_14ClarificationregardingsubmissionofAnnexure-VofGCC.pdf
ATTACHMENT
GCCACS9.pdf
ATTACHMENT
CorrectionSlipNo7GCCofApr-2022.pdf
ATTACHMENT
CorrectionSlipNo8GCCofApr-2022.pdf
ATTACHMENT
CorrectionSlipNo10GCCofApr-2022.pdf
ATTACHMENT
CEESpecLED.pdf
ATTACHMENT
RewirngSpec-I.pdf
ATTACHMENT
TechSpecforFeederPIllar.pdf
ATTACHMENT
AnnexureAMeterSpecs.pdf
ATTACHMENT
251-J-Elect-T-26-2025-26.pdf
ATTACHMENT
GCCACS11.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .