Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.5 LAccepted-AOC VEER KUNWAR SINGH COLONY BEHIND QTR NO H 150 HINNO RANCHI 834002 | RANCHI | JHARKHAND | 834002 | ₹32.5 L | L1 | Accepted-AOC AOC |
| 2 | L2₹38.2 LRejected-Finance B 148 2ND FLOOR B BLOCK NEAR MOTHER DIARY SECTOR 8 DWARKA NEW DELHI 110077 | SOUTH WEST | DELHI | 110077 | ₹38.2 L | L2 | Rejected-Finance Quoted higher than L1. |
| 3 | L3₹39.6 LRejected-Finance | ₹39.6 L | L3 | Rejected-Finance Quoted higher than L1. |
| 4 | L4₹48.1 LRejected-Finance VASANTASAKHA PLAZA NEAR NAVLE BRIDGE NEXT TO DANGAT CERAMIC HOUSE NARHE PUNE 411 041 | PUNE | MAHARASHTRA | 411041 | ₹48.1 L | L4 | Rejected-Finance Quoted higher than L1. |
| Sl No | Description | Qty | Unit | M/s CGPL ELECTROMECH PVT LTD L2 | METRO ENGINEERS SERVICES L3 | M/S AMAR ENTERPRISES L1 | Virtus Techno L4 |
|---|---|---|---|---|---|---|---|
| 1.00Design,Fabrication,Assembly,Wiring, Supply of cubicle type Outdoor LT panel, IP54 protection with weather proof canopy on top, double door arrangement, suitable for 415V+/-10%, 3 Phase, 4 wire 50 Hz AC supply system,fabricated in compartmentalized modular design from CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, dust and vermin proof , totally enclosed, Form 3b compartmentalised design, floor mounting, free standing having 4P Aluminium alloy bus bars for high conductivity, DMC/SMC bus bar supports, with short circuit withstand capacity of 25 KA for 1 sec , bottom base channel of MS section not less than 100 mm x 50 mm x 5 mm thick, fabrication shall be done in transportable sections, entire panel shall have a common Copper earth bus bar of size 25mm x 5mm at the rear with 2 Nos. earth stud, solid /flexible connections from main busbar to switchgears and from switchgear output to cable termination in cable alley with required size of Busbar / Aluminium Conductor and control wiring with 2.5 sqmm FRLS PVC insulated copper conductor cable, cable alleys, cable gland plates in two half including providing following switchgears /metering instrunments and accessories as per specifications. | |||||||
| 1.01 | a) INCOMER
02 Nos. MCCB , 160 Amps, 4 Pole , 25 kA with adjustable setting , thermal magnetic release with O/C & S/C protection (Ics=100% Icu) complete with following accessories:
Each Incomer shall have one set of the following items:
1 No. 96 mm x 96 mm digital type Voltmeter of suitable range for 3phase,4 wire operation with LED display and selector switch and backup by 3 Nos of 2Amp MCB.
1 No.96 mm x 96 mm digital type Ammeter for 3 phase 4 wire operation with LED display and selector switch and suitable rating CT's
3 Nos of LED Type Phase indicating lamps (R,Y,B) controlled by 2Amp MCB -1Set
03 Nos LED Type ON/ OFF/ TRIP with 2Amp control MCBs-1set
2 Nos. Four Module Type2 / Class C Surge Protection Device 65kA with suitable rating backup fuse including all necessary accessories.
b) BUSCOUPLER
(i) 01 Nos. MCCB , 160Amps, 4 Pole , 25 kA with adjustable setting , thermal magnetic release with O/C & S/C protection (Ics=100% Icu)
(ii) 03 Nos LED Type ON/ OFF/ TRIP with 2Amp control MCBs-1set
(iii)All Incomers & Bus-Couplers shall be interlocked electrically & mechanically (castel key) with suitable accessories.
c) BUS BAR
Four Pole aluminium extensible type main bus bars of minimum 200 Amps. capacity with heat shrinkable coloured sleeves having 100% neutral bus as that of phase i/c DMC / SMC bus bars supports at required intervals complete for cross section, size supports & having spacing etc. for withstanding fault level of 25kA capacity for 1 sec.
d) OUTGOINGS
i)4 pole, 125 Amps,25 KA thermal magnetic release type MCCB (Ics=100% Icu) - 02 Nos
ii)4 pole, 63 Amps,25 KA thermal magnetic release type MCCB (Ics=100% Icu) - 02 Nos
iii)4 pole, 40 Amps,25 KA thermal magnetic release type MCCB (Ics=100% Icu) - 06 Nos
Each MCCB outgoings shall have LED type ON/OFF indication lamp with backup of 2 Amp SP MCB
iv) 2 Pole, 32 Amps,10 kA, "C" curve MCBs-4 Nos
Note:
a) 1 Set Rotary operating mechanism and terminal extension spreaders with door interlock shall be provided for all Incomers and Buscouplers
b) All accessories such as auxiliary contactors, auxiliary switches, MCBs, phase seperators etc. as required. | 1 | Job | 1,85,700 ₹1.9 L | 5,00,000 ₹5 L | 1,50,000 ₹1.5 L | 5,32,537.2 ₹5.3 L |
| 2.00Design,Fabrication,Assembly,Wiring, Supply of cubicle type Outdoor LT panel, IP54 protection with weather proof canopy on top, double door arrangement, suitable for 415V+/-10%, 3 Phase, 4 wire 50 Hz AC supply system,fabricated in compartmentalized modular design from CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, dust and vermin proof , totally enclosed, Form 3b compartmentalised design, floor mounting, free standing having 4P Aluminium alloy bus bars for high conductivity, DMC/SMC bus bar supports, with short circuit withstand capacity of 25 KA for 1 sec , bottom base channel of MS section not less than 100 mm x 50 mm x 5 mm thick, fabrication shall be done in transportable sections, entire panel shall have a common Copper earth bus bar of size 25mm x 5mm at the rear with 2 Nos. earth stud, solid /flexible connections from main busbar to switchgears and from switchgear output to cable termination in cable alley with required size of Busbar / Aluminium Conductor and control wiring with 2.5 sqmm FRLS PVC insulated copper conductor cable, cable alleys, cable gland plates in two half including providing following switchgears /metering instrunments and accessories as per specifications. | |||||||
| 2.01 | a) INCOMER
02 Nos. MCCB , 125 Amps, 4 Pole , 25 kA with adjustable setting , thermal magnetic release with O/C & S/C protection (Ics=100% Icu) complete with following accessories:
Each Incomer shall have one set of the following items:
1 No. 96 mm x 96 mm digital type Voltmeter of suitable range for 3phase,4 wire operation with LED display and selector switch and backup by 3 Nos of 2Amp MCB.
1 No.96 mm x 96 mm digital type Ammeter for 3 phase 4 wire operation with LED display and selector switch and suitable rating CT's
3 Nos of LED Type Phase indicating lamps (R,Y,B) controlled by 2Amp MCB -1Set
03 Nos LED Type ON/ OFF/ TRIP with 2Amp control MCBs-1set
2 Nos. Four Module Type2 / Class C Surge Protection Device 65kA with suitable rating backup fuse including all necessary accessories.
b) BUSCOUPLER
(i) 01 Nos. MCCB , 125Amps, 4 Pole , 25 kA with adjustable setting , thermal magnetic release with O/C & S/C protection (Ics=100% Icu)
(ii) 03 Nos LED Type ON/ OFF/ TRIP with 2Amp control MCBs-1set
(iii)All Incomers & Bus-Couplers shall be interlocked electrically & mechanically (castel key) with suitable accessories.
c) BUS BAR
Four Pole aluminium extensible type main bus bars of minimum 200 Amps. capacity with heat shrinkable coloured sleeves having 100% neutral bus as that of phase i/c DMC / SMC bus bars supports at required intervals complete for cross section, size supports & having spacing etc. for withstanding fault level of 25kA capacity for 1 sec.
d) OUTGOINGS
i) 4 pole, 63 Amps,25 KA thermal magnetic release type MCCB (Ics=100% Icu) with suitable 4 pole contactor, 0-24 hours astroniomical timer, auto /manual selector switches , Start/Stop Push Button and necessary wiring etc. -2 set
iii)4 pole, 40 Amps,25 KA thermal magnetic release type MCCB (Ics=100% Icu) - 06 Nos
Each MCCB outgoings shall have LED type ON/OFF indication lamp with backup of 2 Amp SP MCB
iv) 2 Pole, 32 Amps,10 kA, "C" curve MCBs-4 Nos
Note:
a) 1 Set Rotary operating mechanism and terminal extension spreaders with door interlock shall be provided for all Incomers and Buscouplers
b) All accessories such as auxiliary contactors, auxiliary switches, MCBs, phase seperators etc. as required. | 1 | Job | 1,25,000 ₹1.3 L | 3,00,000 ₹3 L | 1,00,000 ₹1 L | 3,05,355.6 ₹3.1 L |
| 3.00Design,Fabrication,Assembly,Wiring, Supply of cubicle type Outdoor Feeder Pillar, water proof with weather proof canopy on top, double door arrangement, suitable for 415V+/-10%, 3 Phase, 4 wire 50 Hz AC supply system,fabricated in compartmentalized modular design from CRCA sheet steel of 2 mm thick i/c powder coated painting in approved shade, dust and vermin proof , totally enclosed, floor mounting, free standing having 4P Aluminium alloy bus bars for high conductivity, DMC/SMC bus bar supports , provision for earthing connections , solid /flexible connections from main bus bar to switchgears and from switchgear output to cable termination in cable alley with required size of Busbar / Aluminium Conductor and control wiring with 2.5 sqmm FRLS PVC insulated copper conductor cable, cable alleys including providing following switchgears /metering instrunments and accessories as per specifications. The Feeder Pillar have to be supplied with suitable pedestal (MS angle Iron frame of MS Channel Base for grouting in the PCC & proper gland at the bottom) | |||||||
| 3.01 | a) INCOMER
01 Nos. MCCB , 100 Amps, 4 Pole , 25 kA with adjustable setting , thermal magnetic release with O/C & S/C protection (Ics=100% Icu) complete with following accessories:
Each Incomer shall have one set of the following items:
1 No. 96 mm x 96 mm digital type Voltmeter of suitable range for 3phase,4 wire operation with LED display and selector switch and backup by 3 Nos of 2Amp MCB.
1 No.96 mm x 96 mm digital type Ammeter for 3 phase 4 wire operation with LED display and selector switch and suitable rating CT's
3 Nos of LED Type Phase indicating lamps (R,Y,B) controlled by 2Amp MCB -1 Set
03 Nos LED Type ON/ OFF/ TRIP with 2Amp control MCBs-1set
b) BUS BAR
Four Pole aluminium extensible type main bus bars of suitable capacity with heat shrinkable coloured sleeves having 100% neutral bus as that of phase i/c DMC / SMC bus bars supports at required intervals
c) OUTGOINGS
i)4 pole, 63 Amps,25 KA thermal magnetic release type MCCB (Ics=100% Icu) - 04 Nos
ii)4 pole, 40 Amps,25 KA thermal magnetic release type MCCB (Ics=100% Icu) - 02 Nos
Each MCCB outgoings shall have LED type ON/OFF indication lamp with backup of 2 Amp SP MCB
iii) 2 pole , 40 Amps, , 10 kA, "C" curve MCBs-6 Nos
Note:
a) 1 Set Rotary operating mechanism and terminal extension spreaders with door interlock shall be provided for all Incomers
b) All accessories such as auxiliary contactors, auxiliary switches, MCBs, phase seperators etc. as required. | 1 | Job | 1,05,000 ₹1.1 L | 1,60,000 ₹1.6 L | 1,00,000 ₹1 L | 1,94,091.6 ₹1.9 L |
| 4.00Supply of XLPE insulated and PVC sheathed aluminium conductor armoured power cable of 1.1 KV grade conforming to IS 7098 (Part-I) 1988 as amended upto date and of following size as required. | |||||||
| 4.01 | a) 3.5C X 35 Sq.mm | 1,500 | Meter | 255 ₹3.8 L | 260 ₹3.9 L | 160 ₹2.4 L | 226.26 ₹3.4 L |
| 4.02 | b) 3.5C X 120 Sq.mm | 500 | Meter | 1,010 ₹5.0 L | 700 ₹3.5 L | 600 ₹3 L | 655.56 ₹3.3 L |
| 4.03 | c) 3.5C X 185 Sq.mm | 900 | Meter | 1,120 ₹10.1 L | 910 ₹8.2 L | 850 ₹7.7 L | 983.34 ₹8.9 L |
Tender Value
₹52.5 L
EMD Value
₹1.6 L
Closing Date
24 Dec 2025, 3:00 pmClosed
AGM (ENGG.-ELECT.)
AAI,B.M.AIRPORT, RANCHI
SITC of LT Panels, High Mast, Street Light alongwith other miscellaneous works at AAI Residential Colony of Ranchi Airport,Ranchi
2025_AAI_257680_1
AAI/RNC/ENGG(E)/2025-26
Open Tender
Electrical Works
150 days
AAI, B.M.AIRPORT
Please refer Tender documents.
17 documents required · 17 mandatory
₹1,180
₹1.6 L
10 Feb 2026
3 Dec 2025
26 Dec 2025
3 Dec 2025
24 Dec 2025
3 Dec 2025
3 Dec 2025 - 10 Dec 2025
Amount
Design,Fabrication,Assembly,Wiring, Supply of cubicle type Outdoor LT panel, IP54 protection with weather proof canopy on top, double door arrangement, suitable for 415V+/-10%, 3 Phase, 4 wire 50 Hz AC supply system,fabricated in compartmentalized modular design from CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, dust and vermin proof , totally enclosed, Form 3b compartmentalised design, floor mounting, free standing having 4P Aluminium alloy bus bars for high conductivity, DMC/SMC bus bar supports, with short circuit withstand capacity of 25 KA for 1 sec , bottom base channel of MS section not less than 100 mm x 50 mm x 5 mm thick, fabrication shall be done in transportable sections, entire panel shall have a common Copper earth bus bar of size 25mm x 5mm at the rear with 2 Nos. earth stud, solid /flexible connections from main busbar to switchgears and from switchgear output to cable termination in cable alley with required size of Busbar / Aluminium Conductor and control wiring with 2.5 sqmm FRLS PVC insulated copper conductor cable, cable alleys, cable gland plates in two half including providing following switchgears /metering instrunments and accessories as per specifications.
Design,Fabrication,Assembly,Wiring, Supply of cubicle type Outdoor LT panel, IP54 protection with weather proof canopy on top, double door arrangement, suitable for 415V+/-10%, 3 Phase, 4 wire 50 Hz AC supply system,fabricated in compartmentalized modular design from CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, dust and vermin proof , totally enclosed, Form 3b compartmentalised design, floor mounting, free standing having 4P Aluminium alloy bus bars for high conductivity, DMC/SMC bus bar supports, with short circuit withstand capacity of 25 KA for 1 sec , bottom base channel of MS section not less than 100 mm x 50 mm x 5 mm thick, fabrication shall be done in transportable sections, entire panel shall have a common Copper earth bus bar of size 25mm x 5mm at the rear with 2 Nos. earth stud, solid /flexible connections from main busbar to switchgears and from switchgear output to cable termination in cable alley with required size of Busbar / Aluminium Conductor and control wiring with 2.5 sqmm FRLS PVC insulated copper conductor cable, cable alleys, cable gland plates in two half including providing following switchgears /metering instrunments and accessories as per specifications.
Design,Fabrication,Assembly,Wiring, Supply of cubicle type Outdoor Feeder Pillar, water proof with weather proof canopy on top, double door arrangement, suitable for 415V+/-10%, 3 Phase, 4 wire 50 Hz AC supply system,fabricated in compartmentalized modular design from CRCA sheet steel of 2 mm thick i/c powder coated painting in approved shade, dust and vermin proof , totally enclosed, floor mounting, free standing having 4P Aluminium alloy bus bars for high conductivity, DMC/SMC bus bar supports , provision for earthing connections , solid /flexible connections from main bus bar to switchgears and from switchgear output to cable termination in cable alley with required size of Busbar / Aluminium Conductor and control wiring with 2.5 sqmm FRLS PVC insulated copper conductor cable, cable alleys including providing following switchgears /metering instrunments and accessories as per specifications. The Feeder Pillar have to be supplied with suitable pedestal (MS angle Iron frame of MS Channel Base for grouting in the PCC & proper gland at the bottom)
Supply of XLPE insulated and PVC sheathed aluminium conductor armoured power cable of 1.1 KV grade conforming to IS 7098 (Part-I) 1988 as amended upto date and of following size as required.
a) 3.5C X 35 Sq.mm
b) 3.5C X 120 Sq.mm
c) 3.5C X 185 Sq.mm
Supply of following outer dia ISI marked HDPE Pipe as per IS :4984:2016 of PE 80 grade and PN 6 rating complete as required
Installation, Testing and Commissioning of LT Outdoor Panel for Guest House mentioned at Item No.1 including excavation for foundation, providing Civil foundation, suitable masonary pedestal upto 45cm height from Ground Level, fixing of panel with required fasterners etc complete as required.
Installation, Testing and Commissioning of LT Outdoor Panel for Street Light mentioned at Item No.2 including excavation for foundation, providing Civil foundation, suitable masonary pedestal upto 45cm height from Ground Level, fixing of panel with required fasterners etc complete as required.
Installation, Testing and Commissioning of LT Outdoor Feeder Pillar mentioned at Item No.3 including excavation for foundation, providing Civil foundation, ,grouting of Panel Pedestal in the Foundation with required fasterners etc complete as required.
Supply of 08 Mtrs. high GI OCTAGONAL continuously tapered Galvanised Street Light Pole with minimum 1Mtr long single/double arm 32/40NB GI bracket mounted on pole for installation of LED street light luminaire suitable for wind velocity as per IS 875 (but not less than 50 m/sec.), fabricated out of 3 mm thick sheet in single section having top dia 70 mm and bottom dia 135 mm, suitable for installation on a precast foundation with supply of 4 Nos. of foundation bolt (20mm dia of 700 mm long) & anchor plate, rigid flange plate (225x225x16mm min.) welded with the base of pole for fixing on foundation bolts complete as reqd. for structural stability as specified, weather proof and vandal resistant door flush with the exterior surface containing a terminal plate of 5 mm thick bakelite sheet with 32 Amp heavy duty 4pole connector for loop in loop out cable terminations suitable for upto two numbers 4 core 25 Sq.mm cables & 6A DP MCB for each fixture connections, earthing bolts for continuous earth connection with 20mm dia, 1.5 m long MS rod for individual poles earthing etc complete as required & as specified.
Erection of 08 Mtr.High OCTAGONAL Street light Pole & Bracket with all accessories in reinforced cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation as per OEM design including excavation and refilling including positioning of template & foundation bolts (supplied with pole to match with pole base plate) & providing and fixing of HDPE pipe of size 63 mm dia (2 pieces of min. 0.75 m length) in the foundation for loop-in-loop-out of the cable to the pole, connecting earthing bolt and the earth rod with 6 SWG GI wire of required length complete as required
Design ,Fabrication,Supply,Erection, Testing and Commissioning of 12.5 (Twelve & half) metre height hot dip galvanised high mast in two section suitable for wind velocity as per IS 875 Part-3 alongwith its all accessories i.e. head frame, suitable SS wire rope, double/triple drum winch,Galvanised lantern carriage arrangement suitable to install minimum 08 Nos. 200 Watts LED Flood Light luminaries & its controlgear boxes (or equivalent such as counter weighted as per design) in symmetrical arrangenment with required cable connection from Panel to mast top & wiring/cabling to each LED fitting and aviation Obstruction Light with counter weight (if required), lightning finial, MCB, suitable electric driven integral power tool motor installed inside the base compartment for its operation and also for manual operation, trailing Copper cable of suitable size,connector,manual handle,junction box, foundation bolts along with Nuts, Bolts, washers, anchor plates and templates etc. as reqiured
Design and casting of suitable shallow foundation with M-20 grade concrete for the above 12.5 mtr. high mast mentioned in Item No.-11 considering the safe soil bearing capacity at site as 10T/Sq.Mtr at min. 2 metres depth including all materials and Labour. The work also includes hard/soft soil exacavation for foundation & disposal of excavated soil .The Foundation design shall be vetted by the NIT/IIT or any Goverment institution and shall be suitable to withstand wind pressure of 50 m/sec along with desired fitting etc. as required.
Supply, Installation,Testing and Commissioning of LED Flood Light Luminaire of 200Watts (min) with high power LED's having luminaire efficacy of not less than 110 lm/W (Narrow/Medium beam for meeting LUX levels as per IS) with secondary optic lens and designed with Powder coated Pressure Die Cast aluminium housing, frame, integral driver with Surge protection, heat resistant toughened glass, confirming to IP 66 protection suitable to operate on 140-270V, 50Hz AC supply, CRI>70, CCT from 5700K - 6500K with PF≥0.95 and THD<10% including control gear and all accessories, suitable for outdoor applications for the High mast complete as required.
Supply,Installation,Testing and Commissioning of LED Type low intensity aviation obstruction light suitable for 220 V , 50 HZ AC supply complete as required.
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL/GI pipe/DWC/HDPE as required.
a) Upto 35 sq. mm
b) Above 95 sq.mm and upto 185 sq mm
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.
a) Upto 35 sq. mm
b) Above 95 sq.mm and upto 185 sq mm
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
a) Upto 35 sq. mm (clamped with 1mm thick saddle)
b) Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required
a) 3½ X 35 sq. mm (32mm)
b) 3½ X 120 sq. mm (45mm)
c) 3½ X 185 sq. mm (57mm)
Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
a) 3½ X 35 sq. mm
b) 3½ X 120 sq. mm
c) 3½ X 185 sq. mm
Laying of following Outer dia HDPE pipe along with all accessories like socket, bend , couplers etc. complete with fitting and cutting, jointing etc. in cement concrete / bitumen surface i/c cutting cement concrete / bitumen surface and finishing with good surface after laying HDPE pipe etc. as required:
a) 63mm dia
b) 110mm dia
Laying of following Outer dia HDPE pipe through trenchless technology (HDD) by drilling the bore of suitable dia directly in ground upto the depth of approx 2 meters from the ground level including necessary jointing coupling, splicing etc as required.
a) 63mm dia
b) 110mm dia
Laying of following Outer dia HDPE pipe along with all accessories like socket, bend , couplers etc. complete with fitting and cutting, jointing etc. direct in ground(75 cm below level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required.
a) 63mm dia
b) 110mm dia
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
Supply & Installation of 7-10 Watts LED Decorative Type Wall Light suitable for 240V,50Hz AC Power Supply
M/s CGPL ELECTROMECH PVT LTD (BID ID -947690)
METRO ENGINEERS SERVICES (BID ID -947863)
Virtus Techno (BID ID -941930)
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.88 MB
Tender_Document.pdf
Tender Documents • 10.01 MB
BOQ_297306.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid