SPECIAL REPAIRS TO BLDG NO P26 OFFRS MD ACCN OLD MANDALAY LINE UNDER GE MH AND RH KHADKI

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exc 0.06 sqm but not exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid over and including screed bed or bedding layer 15mm thick in CM 1:4 complete all as specified and directed.

M & L for Glazed Ceramic tiles, Coloured, of size 300mmX450mmX7mm as on Vertical Surfaces such as Skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid over & including backing coat of 10mm thick in cement mortar 1:4 complete all as specified and as directed.

M&L Coloured Vitrified tiles 8 to 10mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tile laid over and including screed bed or bedding layer 15 mm thick in CM 1:4 complete all as specified and as directed.

All as per item No 4 above but as in skirting over & including 10 mm thick rendering as in backing coat in cm 1:4 complete all as specified and as directed.

Demolition of unreinforced cement concrete in ground floors and Pavings not exceeding 15cm thick [below or above ground level] including removal of debris out side MD land complete all as specified and as directed.

M&L for 75mm thick PCC M-10 grade (nominal mix) using 20 mm graded stone aggregrate as in plinth protection, path, floor construction joint after every 2 mtr interval and from wall will be filled by mastic of bitumin/compound grade 'A' all as specified and directed.

M & L for coloured Pre-polished Chequered Cement Concrete tiles 300 mm X 300 mm X 25 mm thick, set, jointed and pointed in neat cement slurry in floors / vertical surfaces / risers / bullnosed treads with grey cement laid over & including screed bed or bedding layer 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed.

M & L for 18-20 mm thick machine cut machine polished Kota stone, as in flooring and treads of stairs etc., laid and jointed with grey cement slurry mixed with a admixture of pigment to match shade of slab including rubbing and polishing to smooth mirror finish all to required sizes, the size and design / pattern of slabs shall be as directed, including diagonals, inlays, borders, margins in two or more shades of slabs over & including screed bed or bedding layer 15 mm thick in Cement Mortar 1:3 complete all as specified and as directed including roughening of exisiting concrete surface all as specified and directed. Note : (i) The edges of treads shall be half moulded and three Nos longitudinal grooves are to be provided to make the stair non slippery. (ii) Treads shall not be mirror polished. (iii) Single piece Kota stone slab shall be used in treads of stair case.

M & L for 18-20mm thick slabs one piece machine cut machine polished Kota stone slab as in riser of steps, skirting, dado etc using laid and jointed with grey cement slurry mixed with a admixture of pigment to match shade of slab including rubbing and polishing the required sizes, the size and design / pattern of slabs shall be as directed, including borders, margins in two or more shades of slabs over & including backing coat of 10mm thick in cement mortar 1:3 including triangular filleting on top in cement mortar 1:3 complete all as specified and as directed.

M&L for 75mm thick cement concrete M-10 grade (nominal mix) using 40mm graded stone aggregate as in sub base floor and paving etc complete all as specified and as directed by Engr-in-Charge.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc and including removal of debris out side MD land complete all as specified and as directed.

M&L rendering 15 mm thick (10mm + 5mm) plaster on fair face of brick work in CM 1:4 and surface finished even and fair by mixing liquid water proofing compound as per manufacturers instructions complete. Note : Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

M & L for rendering to internal brick / concrete surfaces, 15 mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 10 mm thick in Cement Mortar 1:3 on fair faces of concrete surface of ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying two coats of weather proof acrylic exterior paint (100%) Acrylic over one coat of self primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper of approved colour and pattern over a coat of primer over a coat of wall care putty not less than 1mm thick finished even and smooth complete all as specified and directed by Engr-in-Charge.

All as per item No 17 above but two coats of chalk whiting on plastered surface white wash over a coat of primer.

M & L for preparing newly plastered ceiling surfaces and applying three coats of white washing complete all as specified and as directed.

Taking down chowkats or frame with shutters (without taking off shutter from the frame) exceeding 1.5 Sq.m but not exceeding 4.00 Sqm each complete all as specified and as directed.

Taking down Chowkats or frame with shutters (without taking off shutter from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed.

S&F 105x60 mm pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates includinguding necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed.

S&F 125x60 mm pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates includinguding necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and as directed.

M&L for PCC M-10 grade (nominal mix) using 12.50mm graded stone aggregate as in filling of pressed steel chowkat all as specified and directed

S & F 35mm thick factory made second class hard wood plain, framed, panelled shutter (2 panels) with lock rail and panel commercial ply or 12 mm veneered particle board of 9 mm B.W.P commercial veneering on both faces. The size of rail and stile as per IS:1003 (part-I), kiln seasoned and chemically pressure treated all as specified and directed.

S & F Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening of Sintex or its equivalent make as approved by Accepting Officer complete all as specified and as directed.

S&F factory made PVC solid panel door shutter 30mm thick (style) connecting of frame made out of MS tube for top and bottom rail. MS frame shall be coverd withheat moulded plain coour PVC 'C' channel having a PVC sheet strips of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for toprail and bottom rail panellinn of plain colour PVC to be fitted in the ms frame welded/ sealed in the stiles and rail with suitable PVC sheet and loading and jointed together with solvent cement, supplying and fixing in the frame at site all as directed.

S & F Aluminium anodised barrel tower Bolt of size 200 mm size of extruded section complete all as specified and as directed.

S & F Aluminium anodised barrel ower Bolt of size 150 mm size of extruded section complete all as specified and as directed.

S & F Aluminium alloy anodised Sliding Door Bolt with hasp and staple (Bolt Type) of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S & F Aluminium cast type anodised Handle, size 150mm long complete all as specified and as directed.

S & F 100 mm size, heavy weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and as directed.

M&L for cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete M-15 grade (nominal mix) using 20mm graded stone aggregrate, depth of embedded portion of holdfast exc half bricks and not exc one brick all as specified and directed

M&L for preparation of new wooden surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint of approved colour over a coat of pink primer complete all as specified.

M & L preparation of old Painted surfaces of wood and wood based materials of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M & L for preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint of approved colour over a coat of red oxide primer complete all as specified.

M & L for complete removal of existing treatment of any description on walls and applying two coats of wall Care Putty not less than 1mm thick on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper over one coat of alkali resistant primer on walls complete all as specified and as directed.

M&L for complete removal of existing finishes by scraping down old decorative surface of ceiling with steel wire brushes and removing smoke spots, moulds, efflorescent salts including filling of spots with POP, chalk whiting priming and applying three coats of white wash on old surfaces of ceiling all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and as directed.

Supplying & fixing to walls and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 includinguding all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

Supplying & fixing to walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 includinguding all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

S&F in repairs 15mm dia, Bib taps, fancy type, chromium plated with capstan or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and suitable for 15 bore of pipe fixed all as specified and directed

S&F in repairs of two way Bib cock 15mm dia, fancy type, chromium plated with capstan or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and suitable for 15 bore of pipe fixed all as specified and directed.

S & F in repairs vitreous china ware wash hand basin, white, angle back of size 550 mm X400 mm including brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting stand, 32mm bore PVC flexible waste pipe and 15mm dia PVC connection 600mm long &15mm dia CP Piller tap etc. complete all as specified and as directed.

S&F in repairs stop valves suitable for 15mm bore iron pipe, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and as directed

S & F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle includinguding fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed.

Supply & fixed in repairs 15mm bore angular stop valves, cast copper alloy, fency type, chromium plated with long or short shank and cup (concealed type) screwed down high pressure, screwed both ends for iron pipe or for unions.

S & F 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed ( Minimum weight 20 mm - 210 grams) complete all as specified and directed.

S&F in repairs chromium plated shower roses with or without swivel joints, 125mm including fixing to steel pipe or union

Supply and fixing PVC connections 15 mm size with PTMT nuts of length 450 mm complete al as specified and directed by Engineer-in-Charge.

Supply and fixing PVC connections 15 mm size with PTMT nuts of length 600 mm complete al as specified and directed by Engineer-in-Charge.

S & F in repairs fency type Pillar taps, cast copper alloy, Chromium Plated, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar, complete all as specified and directed.

M&L for 18 to 20 mm thick Granite slab (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar 1:4 includinguding point ing in white cement 1:2 using marble dust with admix ture of pigment to match with shade of granite laid over & includinguding 20 mm thick screed bed in CM 1:4 as directed by Engineer-in-Charge. Note : The rate quoted is deemed to be included for full moulding of edges and making, opening for kitchen sink all as directed by Engr-in-Charge.

S & F in repairs Rolled Mild Steel work confirming to Fe 410-W, Grade-E- 250, Quality-A as in Framed work as in doors or gates of angle or other section with gusset plates, rails/grills/ladder, braces, etc complete, drilled for fixing of steel sheeting or other covering, Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings [exclusive of steel sheeting or other covering, running rails and guides] and hanging, also fastening and fixing complete all as specified and as directed.

S&F in repair,110mm dia PVC (SWR) bends any radius,for pipe all as specified and directed.

S & F in repair, 110mm thick PVC (SWR) pipes Type 'A' single socketed, in any length with rubber ring joints fixed on wall all as specified and directed.

S&F in repair, 110mm bore PVC (SWR) branch pieces, single (single Y) equal or unequal all as specified and directed.

S&F in repairs PVC (SWR) junction 110mm bore single T equal or unequal all as specified and directed.

S&F in repair tubular towel rail 20mm dia, D type 60cm long between flanges brass chromium plated, all as specified and directed.

S&F health faucet chromium plated (ABS Body) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook fixing to 15 mm bore of pipe all as specified and directed.

S&F in repairs 15mm Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair CP grating ring or frame square or round 100mm size complete all as specified and directed.

S & F in repairs Vitreous china wash down water closet (Pedestal pattern), white (excluding flushing cistern and flush pipe) including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap complete all as specified and as directed.

S&F in repairs MS Sheets 1.25mm thick as in shutters of cupboard, shelves (partition of built in steel cupboard), cut to size including benching or turning up complete all as specified and directed

S&F in repairs mild steel mortice lock, vertical type, size 100mm, 4 levers as in wardrobes, almirah etc complete all as specified and directed.

M&L for running welding for repairing steel windows and ventilators hinges, brackets, steel handles etc complete all as specified and directed.

S&F in repairs powder coated aluminium pipe 25mm dia and 2mm thick as in curtain rod fixed to brackets complete all as specified and directed (shade and design as approved by GE). Note : Brackets shall be measured and paid separately

S&F in repairs powder coated aluminium brackets fancy type for curtain rods complete all as specified and directed.(shade and design as approved by GE)

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, includinguding bedding in cement mortar to dwarf wall or including cantilever brackets, CP waste coupling and PVC waste pipe overall size of sink 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed.

S&F in repairs bathroom cabinet mirror (of approved pattern) of size 450mmx 350mm regular size with mirror and PVC shelves complete all as specified and directed by Engineer-in-Charge.

S & F Rotational moulded Polythene [HDPE] Water Tanks, Cylindrical & Vertical Type 500 Liters Capacity triple layered 'ISI' marked, hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes complete including taking down old RCC tanks and removing to store or given to contractor as credit complete all as specified and as directed.

S & F Rotational moulded Polythene [HDPE] Water Tanks, Cylindrical & Vertical Type 1000 Liters Capacity triple layered 'ISI' marked, hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes complete including taking down old water tanks and removing to store or given to contractor as credit complete all as specified and as directed.

S&F aluminium louvered ventilators of section size 100mm x 25mm x 1.50mm including frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc including taking down existing steel ventilator all as directed by Engr-in-Charge. Note : Glazing and 0.56 mm dia SS wire mesh with average width of aperture 1.18 mm shall be deemed to be included in unit rate quoted.

S&F Powder coated aluminium grill of approved pattern using channel of required size, screwed to windows & ventilators with self tapping screws all as specified & directed

S&F aluminium powder coated (minimum thickness of powder coating shall not be less than 50 microns of approved coloure) window sliding type (3 track) with frame size 100x35x1.20mm and shutter 39.40x17.70x1.20mm with two glass shutter and one stainless steel wire mesh shutter including necessary jointing cleats, glazing clips, rubber packing powder coated aluminium snap beading screws with 4mm plain float glass and 0.56mm dia SS wire mesh, fittings etc, and necessary locking arrangements and including making good the jambs and painting with matching type and shade complete all as directed. Note : 4mm thick glazing & 0.56 mm dia SS wire mesh shall be deemed to be included in unit rate quoted

Forming jams etc to above openings including cutting, toothing and properly bonding into old work in CM 1:4 all as specified and directed

S&F in repairs 150mm rubber door stopper of aluminium alloy body, anodised all as specified and directed.

S&F mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete

S&F Stainless steel peg set of 6 (Heavy duty) complete all as specified and as directed.

S&F in repairs 15mm bore CP Central Hole Basin Mixer 450 mm long high neck without Popup Waste System with 450mm Long Braided Hoses fittings complete all as specified and directed.

S & F in repairs Vitreous China Squatting pan Orissa pattern long pan, size 580 mm x 440mm white with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc, including trap set in and including concrete complete including making good to floor all as specified and directed.

S&F in repairs plastic water closet seat cover (any colour) closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device all as directed.

S&F in repairs vitreous china wash hand basin white size 460x342/560x450mm or above miniumum depth 155mm or above under counter oval type including flexible waste pipe and waste coupling making good as specified and directed.

Supply and Installation of factory made Modular kitchen with Glen 4 Brass Burner Gas Stove : CT1043GT & Glen Filterless Auto Clean Motion sensor Wall Mounted Chimney 600mm with installation depth of kitchen: 6060BLAC, not exceeding 750 mm in Offrs Md Accn as per site conditions and shape of Kitchen, including preparation of detailed site drawing for approval considering actual site diemensions with provn for all required services complete all as shown on drawings & all as specified & directed by Engineer-in-Charge:- Make : Livspace.com or equivalent as approved by GE. The Kitchen shall comprise of the following Items (i) Plywood BWP Grade Architect Ply as per IS-710 (Greenply/Century) (ii) Laminate : Shutter: 1.0mm High Gloss LaminarteInside: 0.8mm Laminate (iii) Cabinets- Required Cabinets as per Drawing. (iv) Partition covering kota stone :6mm ply with 0.8mmlaminate on out side (v) Drawer System-NOVA Sleek/DWD GRASS including all accessories. (vi) Hardwares: Soft Close hardweres from Sleek /Hettich/Blum. (vii) Drawer storage organizer: Plain tray, Curtlery tray, Anti Slip mat in all drawers and cabinets, Round Dust bin. Cargo plus thali. All Items are from Hettich. (viii) Profile Handle for shutters and drawers: Aluminum Profile handle (GType) from Hettich as approved by GE. (ix) All shutters shall have PVC edge bands on all four sides, finish of PVC edge band as approved by GE. (x) The modular kitchen shall have a 5 Years Warrantee against Manufacturing defect, the work shall be completed including all the required accessories for fixing the kitchen at site as per drawing and to the satisfaction of Engr-in-Charge complete all as specified and directed.

Taking down / removing existing water proofing treatment from RCC roof slab including removal of plaster bed below felt / membrane and removing rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M & L for 15 mm thick screeding / rendering in cement mortar 1:4 on concrete roof surface, mixing with liquid Water Proofing Compound as per manufacturers instruction, finishing surface even and smooth without using extra cement all as directed. Note: Liquid Water Proofing Compound shall be measured and paid separately under relevant item of this BOQ.

M & L for applying APP (Atactic Poly Propylene) bitumen membrane 3mm thick APP modified weight not less than 3.60 Kg/Sqm reinforced with non woven polyester fibre of weight 160 gms/sqm as center core and without multiple layers of polyethylene, finished on top and bottom with 7 micron thick flammable polyethylene, applied by thermo fusion using LPG torch on the bottom portion of the membrane, after applying a coat of bituminous primer 0.40Kg/Sqm over roof (An overlap of 100mm & 150mm shall be provided on sides and ends respectively) complete all as per manufacturers instructions. Finally, painting with a coat of bituminous aluminium paint @100gms / Sqm complete all as specified and directed by Engr-in-Charge.

Taking down carefully copper/aluminium point wiring (light, Fan, socket,Geyser or power) complete (fittings such as switches, ceiling roses, pendants, regulators, light fitting etc, removing materials to store for keeping in safe custody for credit (credit for above items should be made as per conditon of material separately) and making good distrubed surfaces of wall/floor/ceiling etc complete all as directed

M&L for point wiring complete with 1.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 V grade multi stranded copper conductor as per IS 694 (1990) drawn through non metallic rigid PVC conduit and accessories concealed in walls/ceilings with 1.5 Sqmm dia multistranded copper cable as earth continuity conductor green in colour connected to common earth dolly, including pressed steel terminal boxes of suitable thickness, for houses modular socket , bell with modular plate switch/regulators,bell switch etc all as specified and directed for following:-

One light point controlled by one switch

One fan/ point controlled by one switch

One switch socket outlet 6 Amps on independent board

One socket outlet 6 Amps on the same board

Bell /buzzer point controlled by one bell push.

One light point controlled by two no of two way switch (two way point)

All as per item No 93 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor,FRLS 1100 V grade PVC insulated but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm cable as earthwire.

All as per item No 93 here-in-before but wiring with 4 sqmm single core multi stranded copper condcutor 1100 V ,FRLS grade PVC insulated but unsheathed single core for 16/20 Amps power point on independent board and 2.5 sqmm cable as earthwire.

M&L for sub main wiring in repair but using two single core multistranded PVC insulated multistranded copper conductor FRLS Cable of size 2.5 sqmm 1100 volt grade drawn into PVC Conduit concealed in wall of suitable size including 2.5 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including chislling/cutting of wall, floor, making hole through wall & making good disturbed surfaces of wall/floor/ceiling to match with existing surface complete all as directed by Engr-in-Charge. Note: Two runs of 2.5 Sqmm single core PVC insulated multstranded copper conductor cable & one run of PVC insulated copper conductor cable green in colour 2.5 Sqmm as earth conductor & PVC conduit medium grade shall be measured as one unit length.

All as per item No 96 above but of cable size 4 sqmm 1100 volt grade drawn into PVC Conduit all as specified and directed. Note: Two runs of 4 Sqmm single core PVC insulated multstranded copper conductor cable & one run of PVC insulated copper conductor cable green in colour 4 Sqmm as earth conductor & PVC conduit medium grade shall be measured as one unit length.

All as per item No 96 above but of Cable size 6 sqmm 1100 volt grade drawn into PVC Conduit all as specified and directed. Note: Two runs of 6 Sqmm single core PVC insulated multstranded copper conductor cable & one run of PVC insulated copper conductor cable green in colour 6 Sqmm as earth conductor & PVC conduit medium grade shall be measured as one unit length.

Supply and fix in repairs Bell push, Modular type, 6 Amp flush type, 240volt AC all as specified and directed.

Supply and fix in repair electric bell Ding Dong, 240 volts AC complete all as specified and directed.

Supply and fix in repair modular switch 1 way 6A ,240 volts AC, 1 module complete all as specified and directed.

Supply and fix in repair modular switch 2 way 6A ,240 volts AC, 1 module complete all as specified and directed.

Supply and fix in repair modular socket 6A 2/3 pin combined, 240 volts AC, 2 module complete all as specified and directed.

Supply and fix in repair modular socket 16A 2/3 pin combined ,240 volts AC, 2 module complete all as specified and directed.

Supply and fix in repair modular switch 16A 2/3 pin combined ,240 volts AC, 1 module complete all as specified and directed.

Supply and fix in repair ceiling rose surface bakelite with three terminals 2 Amp, 240 Volt AC complete all as specified and directed.

S & F sheet metal enclosures in repair double door distribution board factory made duly painted 12 way SPN and neutral 240 v with 200 amps rated copper bus bar, concealed in wall suitable for fixing MCB /Isolators all as specified

S & F sheet metal enclosures in repair for double door distribution board factory made duly painted 4 way SPN and neutral 240 V, AC with 200 amps rated copper bus bar, concealed in wall suitable for fixing MCB /Isolators all as specified

S & F sheet metal enclosures in repair with socket plug top and MCB 20 amp 'C' curve double pole factory made duly painted 240V, AC concealed in wall suitable for fixing geyser / AC complete all as specified

S & F in repair of capacity MCCB 125 Amps, 4 pole, Breaking capacity 16 KA, 415 V adjustable type all as specified. Note : The MCCB is to be fixed in TPN DB.

Taking down unservicable metal box, S & F sheet metal enclosures for double door distribution board factory made duly painted 4way TPN, vertical and neutral 440 V with 200 amps rated copper bus bar concealed in wall, suitable for fixing MCB / MCCB / Isolators all as specified

Supply and fixing miniature circuit breaker (MCB) of single poles, current carrying capacity 5 to 32 Amps,AC, 240V, 10 KA 'B' curve in the MCB DB Complete with connection testing and commissioning.

Supply and fixing miniature circuit breaker (MCB) of single poles, current carrying capacity SPN 32 Amps, AC, 240V, 10 KA 'B' curve in the MCB DB Complete with connection testing and commissioning.

Supply and fixing miniature circuit breaker (MCB) of single poles, current carrying capacity SPN 63 Amps, AC, 240V, 10 KA 'B' curve in the MCB DB Complete with connection testing and commissioning.

Taking down old unserviceable fitting and S & F wall mounted extruded aluminium housing high quality indoor batten LED tube 20 watt colour temperature 6500 K (4" long) lumen 2000 -3000, PF> 0.95, THD less then 10% diffused connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge.

Taking down old unserviceable fitting and S & F wall mounted extruded aluminium housing high quality indoor batten LED tube 10 watt colour temperature 6500 K (4" long) lumen 2000 -3000, PF> 0.95, THD less then 10% diffused connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge.

Taking down old unserviceable fitting and S & F LED light fitting 1 x 9W / 1 x 10W Asthetically designed wall bracket light in wooden housing, glass and B 22 / E 27 holder luminaires including LED invertor light 10W B22 CW/P holder connecting up with three core flexible copper conductor cable of suitable size. temp range 4000k to 6500 K as per site requirement as directed by Engr-in-charge. Make : Halonix / Philips / Bajaj.

S&F fix high efficent LED building security light fitting in repair 30 watt , 240 V , lumen 2000 -3000, PF> 0.95, THD less then 10%, made of pressutre cast aluminuim housing with high power LEDs, lens and touughned glass IP 66 connecting with three core flexible copper wire 0.55 Sqmm from connector to ceiling rose including GI pipe 32/40 mm light grade with bracket made out of 25x 3 mm strip

Taking down old unservicable ceiling fan of any type, depositing it to MES store and Supply & fixing ceiling fan complete with blades, down rods, electronic regulator/REMOTE and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

Taking down old unservicable exhaust fan of any type, depositing it to MES store and Supply and fix exhaust fan, steel body AC single Phase. 230V heavy duty of size 300mm sweep with, blades, and frame and louvers. Make : Cromptorn / Bajaj / Orient.

Taking down old unservicable exhaust fan of any type, depositing it to MES store and supply and fix exhaust fan, steel body AC single Phase. 230V heavy duty of size 380mm sweep with, blades, and frame and louvers. Make : Cromptorn / Bajaj / Orient.

Material and labour for earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI earth wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and including 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and charcoal filling, necessary excavation and earth work complete. Note : Rate of item is deemed to be included for excavation in hard rock, by compressor machine to achieve required depth.

S & F in repair meter panel box indoor type wall mounting of with locking arrangement including powder coating siemens grey shade for size 1200 (w) x 1000 (h) x 250 (d) mm. with the provision of MCB mounting chanels suitable for mounting four nos single phase meter and one single phase meter for steer case meter all as specified and directed by Engr in charge.

Taking down old unserviceable geysers of any capacity & type depositing it in MES store in safe custody and making good disturbed surface of wall/floor/ceiling etc complete all as specified and directed by Engr-in-Charge.

Supply and fix electric water heater storage type steel body with copper inner tank suitable to withstand 8 bar pressure and copper heating element of 2 KW, capacity 25 liters, BEE 5 star rated , shock resistant complete with all accessories such as safety valves, thermostate, NRV, connection pipes etc all as specified and directed by Engr-in-charge. Make : Bajaj / Crompton / Havells / Polycab.

Taking down old conventional KWH meter refixing to new meter panel box with complete wiring againt the same qtr from which it disconnected on exisitng position all as directed satisfied by Engr-in-Charge.

M & L for Rigid non-metallic PVC Conduit 20 mm medium grade exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc for telephone, cable point,inverter connection

S & F connect T.V. Outlet mini Make: HPL cat No: SSTFTVOM or equivalent make of Havells/Anchor

S & F connect Telephone Jack mini Make: HPL Cat No: SSTFT JM or equivalent make of Havells/Anchor

JP ENTERPRISES

S.R.M.K Enterprises

MAHESH DADAJI BACHHAV

M/S JAYCONSTRUCTION CO