PROVISION OF STORE SHELTER TOILETS BLOCK CONSTRICTION OF 2/5 GI PIPELINE WITH PUMPING SYSTEM AND 5000 LTRS SYNTEX TANK OF AGE B/R AND AGE E/M UNDER GE TENGA

Amount

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil

Excavation in trenches n,exc 1.5 m wide and n.exc 1.5 m deep for foundation and getting out in hard/dense soil.

M&L PCC 1:4:8 type D2(using 40mm graded aggregate)as in foundation filling and mass concrete etc.

M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete.

M&L for precast cement concrete solid building blocks (1:3:6), type C-1, 10 cm thick (with plain or interlocking joints as directed) setting in cement mortar (1:4), complete, laying inner side of wall.

M&L for re-inforced cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in beams, plinth beams, cantilevers, bressummers, lintels over 1.5 m span etc complete.

M&L for MS TMT bars 10mm dia and over, cut to lenth, bend to shape required, including cranking, bending, sprially for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.

M&L for MS TMT bars 05mm dia and over, upto and including 10 mm dia in stirrups, spaces and binders.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete.

M&L rendering 15 mm thick in CM 1:4 on concrete surfaces finished even and smooth without using extra cement .

M&L Second class HW in Scantling clean sawn all as specified.

M&L for rendering 15 mm in CM (1:6) over concrete wall surfaces finished even and smooth without using extra cement.

M&L for newly plastered surfaces of walls and applying two coats of cement based paint, over a coat of primer complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash.

Returning/filling in including spreading, levelling, watering and well remming in hard/dense soil.

Removing excavated material n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point.

M&L hard core of gauge n.exc 63mm, deposited, spread and levelled in layers nexc 15 cm thick, watered and rammed to a true surface broken stone and boulders.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as cement concrete in Sub-base floors, sub-bases floors and pavings etc complete all as specified.

M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in sub base of floorings.

M&L for 15 mm thick screed bed in CM 1:4 for laying floor tiles .

M & L for Non-skid ceramic tiles 7 to 8 mm thick coloured tiles( square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match.

M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finshed rough to receive tiles .

M & L for 350 x 250 x 7 mm/450 x 350 x 7 mm thick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.

M&L for 75 mm thick plain cement concrete type C-1, 1:3:6, (40mm graded stone aggregate)as in plinth protection, finishing the top surfaces even and smooth W/O using extra cement.

S & F 3mm thick figured glass, pin head glazing with oil putty /wooden beads in squares n exc 0.50 Sqm in each pane.

S&F Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour havimg testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed.

S&F Pre-Painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour havimg testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying and fixing in opening as per specification and drawing.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification & drawing.

S&F 100mm size stainless steel butt hinges, medium weight, cold rolled complete with stainless steel screw etc. all as specified as directed.

S & F 75mm size mild steel butt hinges medium weight cold rolled and fixed.

S& F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed

S& F Aluminium anodised barrel tower bolts 100mm long of extruded section and fixed

S & F 150mm size extruded aluminium alloy handles, fabricated type anodised

S & F 100mm size extruded aluminium alloy handles, fabricated type anodised

S & F vitreous china Squatting pan 'Orissa Pattern' size 580 x 440 mm white with integral foot rest.

S & F vitreous china wash down water closet pan (pedastal pattern) white incl PVC (SWR) 110mm 'P’ trap and WC connector (exclusing fixing bolts, flushing cistern and flush pipe)

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F toilet paper holder of brass, chromiun plated or stainless steel complete in all respect as specified.

S&F vitreous china bowl urinal flat back, size of 465x355x265 mm white (minimum), (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs, fixing of flush pipe, waste pipe, grating and connection to water supply pipe complete all as directed.

S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe(minimum weight 60 gms).

S & F 10 litres PVC, Syphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and brackets complete.

S&F PVC (SWR) pipes single socketed 110mm dia in any length with rubber ring joints fixed to walls

S&F PVC (SWR) junction single, (single T) equal or unequal with access door 110mm dia.

S&F PVC (SWR) bends any radius, bend 110mm dia.

S&F PVC (SWR) vent cowl 110mm dia

S&F PVC (SWR) WC connector 110mm dia lip ring.

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement.

S&F PVC (SWR) pipes 75mm dia single sockted in any length with rubber ring joints fixed to walls.

S&F PVC (SWR) bends any radius with access door, 75mm dia.

S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes fixed to walls .

S & F 20 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes fixed to walls .

S&F 15 mm dia bib taps, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F 15mm bore angle stop valves, fancy type chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions & fixed.

S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between fllanges.

S&F vitreous china wash hand basin white flat back of size 550mmx400 mm including cutting for and pinning in ends of brackets or errecting stand but exclusive of fixing of waste pipe and CI brackets complete all as specified and directed.

S&F 32 mm bore Low density poly ethylene pipes of pressure rating 6kgf/cm2 fixed complete to walls,ceiling or in floors etc.

S&F 15 mm bore chromium plated fancy type pillar tap cast copper alloy with capstan heads, screwed down high pressure,with or without leterred "Hot ot Cold" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S & F framed work such as grills, gratting,framed brackets of angles or tees with web and flange cut to shape etc with ends of bars, shouldered and/or reveted, or forged into spikes, framed guard bars, framed works of water tankes stagging,gates and similar work con-forming to Fe.290.Gde-E-165.

S&F Rotational mounded polythene water storage tank of 1000 ltrs capacity, (multilayered, cylindrical, vertical with closed top) hoisted and fixed in position as specified in SSR Pt-I.

S&F ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipes of 20 mm dia or brass ferrule and fixed, all as directed.

S&F Gun metal globe or gate valve with Iron wheel head, screwed both ends for 20 mm dia of pipe and fixed.

M&L for construction of 1.20 m dia x 3.00 m deep soakage well, excavation in hard/dense soil foundation PCC 1:3:6 ,wells of honey combed stone masonry wall, including intercepting chamber, screen chamber, RCC cover slab, filling with brick bats etc complete all as specified.

M&L for construction of septic tank for 10 users, in hard/ dense soil, foundation in PCC 1:3:6 type C-1, stone masonary wall in CM 1:4, RCC slab cover including RCC precast manhole cover having 6mm plate embedded all around/ fibre reinforced cover with angle iron frame vent shaft and sludge chamber complete all as specified in ED-2007 and as directed.

Material and labour for providing PCC (1:3:6) type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of bore 150mm on after they are laid and tested complete all as specified and directed..

Material and labour for Sail glased stone ware drain pipe 150 mm dia grade A laid in trenches and jointed in cement mortar 1:1 complete all as specified and directed.

M&L for re-inforced cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in foundation, including rafts footing, foundation beams, plinth beams, bases for columns etc complete.

M&L for re-inforced cement concrete 1:2:4 type B-0 (12.5 mm graded aggregate) as in columns, pillars etc complete.

S & F roof trusses (framed), trussed, purlines, crane grantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance piecces, cleats, plates etc confirming to Fe.290.Gde-E-165.

M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces.

M&L for chequered cement concrete tiles 20cmx20cmx25mm thick set with grey cemnt and no pigment, jointed and pointed in neat cement slurry in floor as specified and directed.

M & L for 50 mm thick II nd class Hard wood clean sawn boarding with butt joints fixed with nails in any situation.

S&F 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces.

M & L for 2 nd class Hard wood plain fillets, square, rectangular or triangular in section,wrought, secured with nails or brads, sectional area exc 3 but n.exc 6 sq.cm.

M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S & F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified.

S&F PVC coated 25mm dia mild steel curtain rod of medium weight and fixing brackets decorative end supports etc complete all as directed”

S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete

S&F 30mm flush shutters, solid core construction with particle board core and plywood face panels, commercial type on both side and both face is covered with decorative face veneer with lipping/frame tp match all as completed and specified as directed.

S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc

S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0.

S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed

S&F 100mm size stainless steel butt hinges, medium weight, cold rolled complete with stainless steel screw etc. all as specified as directed.

Material & Labour for light/fan Point wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches including PVC insulated and unsheathed (FRLSH)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly upto Ceiling rose/light point complete all as specified and directed.

All as per item No. 85 here in before but for one 3 pin socket outlet 5 Amps three pin controlled by one switch on independent board complete all as specified directed.

M&L for Point wiring for one socket outlet 15 Amp on independent board with 4 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches including PVC insulated and unsheathed (FRLSH)single core multi-stranded copper conductor cable of size 2.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.

S&F for socket outlet 2 in 1, 5 pin, 5Amp flush type universal all as specified and directed.

S&F for socket outlet 2 in 1, 5 pin, 5Amp and 15Amp flush type universal all as specified and directed.

Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified & directed.

Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed.

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed.

Supply and fixing regal batten for LED Tube universal batten for G 13 T8 lamps including making electric connection from Ceiling Rose to tube light fitting including photon ultra plus LED tubelight 20W (single side connection) ultra bright LED Polycarbonate Tubelight with 10% THD with very high efficiency suited for installation in existing T8 Tubelight with G13 lamp holder to give glare free light with integrated electronic driver complete all as directed by Engr in Charge.

SS & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

S&F lamp holder insulated body PVC/ polycarbonate type with back plate for batten fitting with one PVC block of complete all as specified and directed.

S&F 1x 10 watt LED lamp complete all as specified and directed.

Supply & Fixing sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral link & earth bar and cement spill protector, 8 way, 240 Volt incl fixing on suitable size of PVC rectangular plastic laminated sheet complete all as specified and directed.

Supply and fixing miniature circuit breaker (MCB) SPN 32 AMP, 240V, 10KA, 'C' curve in the MCB DB complete with connection testing and commissioning as specified and directed.

Supply and fixing miniature circuit breaker (MCB) SP 5 To 32 AMP, 240V, 10KA, 'C' curve in the MCB DB complete with connection testing and commissioning as specified and directed.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor 16 sq mm, served with inner sheathing of PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and directed.

Supply and fix electric exahust fan suitable for operation on AC 230 volts 50Hz RPM 1200, Copper winding of sweep 300mm having facility for including installation in position with necessary fixing clamp, studs, nut, bolts and washers and grouting in walls and cement work compite and making necessary arrangement and texting complete all as directed.

Supply and fix electric operated storage water heater (Geyser) capacity 25 ltrs capacity vertical type 2KW suitable for operation on AC 230 volts having facility for inlet and outlet water supply connection, indication lamp Red and green with auto cut off system including installation in position with necessary fixing clamp, studs, nut, bolts and washers and grouting in walls and cement work compite and making necessary arrangement for inlet/outlet water supply connection for cold/hot water and texting complete all as directed.

S&F Stop valves, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of size 15 mm.

S&F Bib tap chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified & as directed by engr-in-charge.

Supplying & Fixing of CP metalic connection pipe, nylon thread reinforced 15 mm dia, 450 mm long with brass union at both ends for 15 mm dia pipe complete all as specified and as directed.

M&L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly complete all as specified and directed. NOTE: (a)Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

M&L for Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete ass as specified and testing on completion complete ass as specified and directed .Note - The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.

S & install monoblock pumping Set 20 HP , Centrifugal, Electric driven, AC 3 phase including suction and delivery 50 mm of Discharge 100 LPS at 70 Mtr Head complete including Automatic Star delta starter and multistranded copper conductor 10 Sqmm single core from starter to motor for star delta connection to each motor separately (01 N working & 01 N stand by)

S & F Rotational moulded polyethylene Water storage tanks, capacity of tanks 5000 ltrs (cylindrical vertical with closed top ) hoisted and fixed in postion.

M&L for Galvanised steel tubes, medium grade of 50 mm dia including all random fittings fixed complete in floors etc & testing after laying up to entire satisfaction & as directed by Engr-in-charge.

M&L for Galvanised steel tubes, medium grade of 20 mm dia including all random fittings fixed complete in floors etc & testing after laying up to entire satisfaction & as directed by Engr-in-charge.

S&F Gun metal gate valves of 50 mm bore, (class I), ISI marked with iron wheel head, screwed both ends for iron pipe, ISI marked, including dismantling U/S gate valves complete all as specified and directed . Make :- Zoloto /Jindal/Sant

S&F Gun metal stop/gate valves of 20 mm bore, (class I), ISI marked with iron wheel head, screwed both ends for iron pipe, ISI marked, including dismantling U/S gate valves complete all as specified and directed . Make :- Zoloto /Jindal/Sant

M&L for PCC 1:3:6 Type C2 for foundation of platform, mass concrete with 40 mm gradede coarse agreegete complete all as specified and as directed.

mon traders (BID ID -3105441)