Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.9 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹39.1 L+₹4.4 L (12.8%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder |
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
6 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh. Jayraj Mohanta, AE (Civ), Offg Garrison Engine
GARRISON ENGINEER KASAULI, DISTT SOLAN (HP) PIN 173204 PH 01792273107
REPAIR OF SEWAGE LINE, SEPTIC TANK, SOAKAGE WELL, SEWAGE SYSTEM AND OTHER MISC WORKS AT SOLAN AND KASAULI UNDER GE KASAULI
2023_MES_594112_1
GEK-46/2023-24
Open Tender
Miscellaneous Works
Item Rate
330 days
SOLAN AND KASAULI UNDER GE KASAULI
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE KASAULI
₹92,000
Yes
31 Jul 2023
9 May 2023
13 Jun 2023
9 May 2023
6 Jun 2023
23 May 2023
Amount
Schedule 'A' Section - I
Material and labour for brick work with sub class `B' bricks,(old size bricks) straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified. Including demolition of brick work built in cement mortar .
M & L for walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge. Including demolition of stone masonary built in cement mortar including quions, arches, pillars etc.
All as per item No -2.00 here-in-before but except stone.
M&L for pre-cast PCC (1:2:4) type B-1 using 20mm graded aggregate as bond stone for stone walling etc setting in CM 1:4 complete all as specified.
M&L for raised pointing in CM (1:4) to random rubble square/polygonal rubbles uncoursed or brought upto courses on old/new surfaces complete all as specified.
S & F for PVC SWR pipes 75 mm dia as in weep holes in retaining wall /rain water pipe complete all as specified
Material & labour for cement concrete 1:4:8 type D-2 ( using 40mm graded stone aggregate) 75mm thick as in sub base to flooring including necessary form work and finishing surface fair and even complete all as specified, including demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials where directed
Material and labour for cement concrete type D-2, 1:4:8( using 40mm graded stone aggregate) in filling foundations and mass concrete complete all as specified, including demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials where directed.
M&L for PCC 1:2:4 type B-1 using 20mm gaded stone aggregate as in , copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed, including demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials where directed.
Material & labour for reinforced cement concrete work (nominal mix) Type B1, 1:2:4 (20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings balconies , canopies, deck slabs and in shelves and the like complete all as specified and directed, including demolition of reinforced concerete in suspended slabs beams, lintels etc. in cement mortar or cement concrete not exc 15 cm thickness(reinforcement cut as required to failitate demolition).
M & L for Mild steel bars 8mm dia TMT bars and over, cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming complete all as specified and directed.
M & L for Form work to sides and soffts of floor or roof beams, beam hauchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc supports, overhangs, etc also splays between floors and beams, chajjas on rough finbished surfaces of concrete etc all as specified and directed.
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick.
M & L for Rendering 15mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces incl finishing surface w/o using extra cement complete all as specified and as directed by the Engineer-in-Charge, including taking down cement or lime plaster of any description from stone or brick walls etc
M & L for Rendering 20mm thick in cement plaster 1:6 on stone masonry work incl finishing surface w/o using extra cement complete all as specified and as directed by the Engineer-in-Charge, including taking down cement or lime plaster of any description from stone or brick walls etc
M&L for preparation of new plastered wall surfaces and applying three coats of white wash complete all as specified and directed
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified
Supply and fix for mild steel work as in Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Gde-E-165 complete all as specified and directed
Supply and fix for mild steel work as in Framed work for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.conforming to Fe 290, Gde-E-165 complete all as specified and directed
S & F Welded steel wire fabric(weight n.exc 4kg/sqm) complete to wood or steel members complete all as specified and directed
S & F Plates (plain or chequered) of Fe 410W Gde E-250 Quality -A channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified & directed.
S & F mild steel screw bolts ( machine made ) with hexagonal or square heads at one end & screwed the other , or screwed both ends ,each screwed end to be fitted with washer and one hexagonal or square nuts exc. 5cm but n. exc. 10 cm long, 11 to 15mm dia of shank complete all as specified.
M&L for salt glazed stone ware drain pipe with PCC bed laid in trenches and jointed all as specified (internal dia of pipe 150 mm bore pipe) complete all as specified.includingd demolition and breaking up 150mm dia salt glazed stone ware/AC/RCC drain pipes jointed in cement mortar and taking out of trenches removing the debries from site
M&L for salt glazed stone ware drain pipe with PCC bed laid in trenches and jointed all as specified (internal dia of pipe 200 mm bore pipe) complete all as specified..includingd demolition and breaking up 150mm dia salt glazed stone ware/AC/RCC drain pipes jointed in cement mortar and taking out of trenches removing the debries from site
M&L for Concrete bed ( Cement concrete1:3:6 type C-2) to 200mm internal dia drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested.
Supply and fixing for butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel complete all as specified.
M&L for Coloured prepolished machine pressed precast concrete interlocking paver block with grey cement & pigment of any shape & size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade and over 25mm sand cushioning complete all as specified and directed.
Comprehenshive maintenance and cleaning of sewage system including sewage lines, manholes, soakage wells/soak-pits, gully traps, septic tanks attending bloakages in WCs/ WHBs/Drains etc by employing necessary resources including T&P at kasauli Mil station all as directed by Engineer-in-charge. The location/ building/complex where work is to be carried out consist of the following:- (a) OTM and Md Accn of GE Kasauli complex. (b) Rajendra Line.Area. (c) 95 Inf Bde Camp Area. (d) MH Kasauli OTM and Md Accn. (e) Ascone Node Kasauli complex. (f) CRS Kasauli Complex. (g) 2RMC & Signal Coy OTM & Md Accn. (h) Station HQ Kasauli OTM & Md accn. (i) Officers Quarters and Officers Messes in Kasauli Mil Stn.
NOTES:- For Srl Item No 28.00 (i) The contractor will employe Engineer as required under Condition 25 of IAFW 2249 and adequate number of labour / Safaiwala in various area to maintain the sewage system functinal upto the entire satisfaction of the Engineer - in - charge. (ii) The Engineer so employed shall report to the concered JE daily to give feed back and also to receive day to day sewage complaints and necessary instruction for smooth running of the contract. (iii) Contractor will carry out normal maintenance to sewage system as required at site. (iv) For any default/delay in attending the complaints recovery shall be effected as per contract conditions provided here-in-after. (v) T & P as requiered for the work shall be arranged by the contractor without any extra cost to the deptt. (vi) The contractor shall take all necessary preventative safety measures and adequate precautions to avoid any health hazard to labour/ safiwala and department shall not be held responsible for any unwanted incidence.
Cleaning of septic tank incl sludge chambers by removing sludge and sludge water by pumping or manually or other means and the sludge /sludge waste night soil and solid soil waste night soil including slugde water from the septic tank of any capacity and disposed off to distance n. exc to 100 mtrs and depositing the same in ditch(including excavation of ditches and making good the surface and as required)including taking off and refixing manholes covers complete all as specified and directed.
Excavation in trenches in hard/dense soil n. exc 1.5m wide and n. exc 1.50m deep and getting out complete all as specified and directed.
Returning filling in and including spreading, leveling and well ramming n.exc 25 cm thick in hard and dense soil complete all as specified.
Removing excavated materials n.exc 50 m and depositing where diretected at a level n.exc 1.5 m above the starting point in soil complete all as specified.
M&L for loose filling with broken brick aggregate of gauge 80 to 150 mm in soakage pits complete all as specified and as directed.
Material and labour for brick work, with sub class 'B' brick straihgt or curved on plan to any radius in half brick work thick wall built in cement mortar (1: 4) as in manholes and septic tanks complete all as specified and as directed .
Cutting in to existing manholes for connecting drain pipes making good to pipe and rendering cutting out existing benches for and forming branch channel (1/2 round or 3/4 section)in cement concrete (1:2:4) type B1 smooth finished and reforming benching as required for 150 mm internal bore pipe complete all as specified.
M & L for rendering 20 mm thick in cement plaster 1:4 on stone masonry surfaces or other than fair faces of brick work or concrete surfaces for manholes, finished even and smooth without using extra cement complete all as specified
M & L 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified
M & L 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with and incl necessary clamping complete all as specified
S & F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed .
S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified
S & F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement
S & F as in repair Vitreous China, semi-pedestal pattern (Anglo-Indian Type) white including fixing bolts, Plastic seat & cover complete all as specified and as directed .
S&F of Vitreous china squatting pan, "Orissa pattern" of size 680 x 470 mm white with integral foot rests(excluding flushing cistern, flush pipe and waste pipe), cast iron P or S trap including provision of cement concrete (1:5:10) type E2 with stone aggregate for setting the trap & pan,complete all as specified.
S & F as in repair 10 litre PVC valveless, syphonic action type, dual flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed .
S&F 110 mm bore PVC (SWR) vent cowl, Complete all as specified and directed.
S & F as in repair Vitreous China pedestal wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand and incl 32mm bore CP coupling long shank , waste fitting complete all as specified and as directed .
M & L dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed .
S & F coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:3, complete all as specified.
M & L Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer in CM 1:4 for laying glazed tiles in floors etc. , complete all as specified complete all as specified and as directed .
Comprehenshive maintenance and cleaning of sewage system including sewage lines, manholes, soakage wells/soak-pits, gully traps, septic tanks attending bloakages in WCs/ WHBs/Drains etc by employing necessary resources including T&P at Solan Mil station complete all as specified and as directed by Engineer-in-charge. The location/ building/complex where work is to be carried out consist of the following:- (a) OTM and Md Accn of GE Solan complex. (b) OTM and MD Accn Present unit at Solan. (c) Officers Quarters and Officers Messes at Solan.
NOTES:- For Srl Item No 50.00 (i) The contractor will employe Engineer as required under Condition 25 of IAFW 2249 and adequate number of labour / Safaiwala in various area to maintain the sewage system functinal upto the entire satisfaction of the Engineer - in - charge. (ii) The Engineer so employed shall report to the concered JE daily to give feed back and also to receive day to day sewage complaints and necessary instruction for smooth running of the contract. (iii) Contractor will carry out normal maintenance to sewage system as required at site. (iv) For any default/delay in attending the complaints recovery shall be effected as per contract conditions provided here-in-after. (v) T & P as requiered for the work shall be arranged by the contractor without any extra cost to the deptt. (vi) The contractor shall take all necessary preventative safety measures and adequate precautions to avoid any health hazard to labour/ safiwala and department shall not be held responsible for any unwanted incidence.
M&L for Dewatering & cleaning of septic tank and soakage well any size and cleaning by taking out mud/sludge from septic tanks and soakage well of any depth, in foul conditions and confined places, getting out and removing the sludge to a distance exc 500 m and n.exc 1000 m and deposited where directed in and including borrow pits and covering the borrow pits with 10 cms thick layer of soil complete all as specified and directed. Note: Net contents of sludge shall be measured at the time of removal and paid. Quoted rate of tenderer is deemed to be inclusive of dewatering as required and nothing extra shall be admissible to the contractor on this account.
Material and labour for brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 including demolition of old brick work bulit in cement mortar complete all as specified & directed by Engr-in-charge.
All as per item No.52.00 above but " except bricks" complete all as specified and as directed.
Material & labour for rendering 15mm thick on fair faces of brick work in cement mortar 1:4 with or without WPC @ 2.5% by weight of cement finished surface even and smooth without using extra cement complete all as specified and directed. Note:- (If WPC used shall be measured and paid for separately as supply only )
Supply only integral water proofing compound ISI marked complete all as specified and directed.
M&L for providing cements 1:3:6 type C1 using 20mm graded aggregate as in plinth course,string courses, lacing courses, parapets and rainling up to 60 cm height, copings, kneelers, apex stones, bed plates, water troughts and the like including weathering,slightly rounded or champfered angles and throating incl use and waste of necessary form work complete all as spd. complete all as specidfied and directed by Engr-in- charge.
M&L for providing Precast boulders of plan cement concrete type C-1 (1:3:6) using 20mm graded crushed stone aggregate and set in cement morter 1:6 complete all as specidfied and directed by Engr-in- charge.
Demolition and breaking up to 150mm dia drain/sewer pipes below ground level (salt glazed stoneware, AC or reinforced concrete and PVC) set in cement mortar incl PCC at any depth complete all as specified and as directed.
Material and labour for 150mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and tested including fittings of same grade complete all as specified and directed.
M&L for salt glazed stone ware drain pipe laid in trenches and jointed all as specified (internal dia of pipe 150mm bore pipe) complete all as specified
M&L for salt glazed stone ware drain pipe laid in trenches and jointed all as specified (internal dia of pipe 200mm bore pipe) complete all as specified
Material and labour for plain cement concrete type C2, 1:3:6 using 40mm graded crushed stone aggregate as in bed to drain pipes including packing under & haunching against the sides of pipes (150mm bore pipe) after the pipe are laid and tested complete all as specified and directed.
Demolition of Reinforced cement Concrete ( reinforcement cut as required to facilitate demolition) on ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.
Material and labour for Precast reinforced cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in cover slabs of manholes, gully traps etc set in cement mortar (1:4) complete all as specified and directed.
Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified.
Dismantling PVC drain or vent pipe of any description in any position including bends branch pieces etc.
S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including clamps as required complete all as specified.
S&F 75mm dia PVC (SWR) bends with oval accesse door with rubber ring joints fixed as required complete all as specified.
S&F 75mm dia PVC (SWR) junction single, (single T), equal or un equal with oval accesse door including jointing with solvant cement as required complete all as specified.
S&F 75mm dia PVC (SWR) vent cowl, single, equal or un equal of any length including jointing with solvant cement as required complete all as specified.
S&F 75mm dia PVC (SWR) branch piece, single, equal or un equal of any length including jointing with solvant cement as required complete all as specified.
S&F 110mm dia PVC (SWR) branch piece, single, equal or un equal of any length including jointing with solvant cement as required complete all as specified.
S&F 110mm dia PVC (SWR) reducer, single, equal or un equal of any length including jointing with solvant cement as required complete all as specified.
S&F 110mm dia PVC (SWR) junction single, (single T), equal or un equal with oval accesse door including jointing with solvant cement as required complete all as specified.
S&F 110mm dia PVC (SWR) "P" trap single, equal or un equal of any length including jointing with solvant cement as required complete all as specified.
Demoliation of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L PCC 1:3:6 type C2 using 20mm graded agg as in surface channel/drains,incl necessary formwork etc all as spd.
Extra for foriming fair finished drain as channel 30 cm inner girth of cement concrete using extra cement including forms moulds mitred/stopped end etc.
Demolition of cement concrete in ground floors and pavings n exc 15cm thick ( below or above GL) complete all as specified and directed.
M&L for PCC 1:5:10 type E-2 as in sub base & in foundation concrete all as specified.
Material and labour for 70mm thick plain cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in flooring, finished even and smooth without using extra cement complete all as specified and directed.
Dismantling of stone slabs and PCC tiles of any description or thickness in floors aprons etc, laid beded and pointed in any mortar and removing the rubbish outside of MoD land, complete all as specified and directed.
Material and labour, coloured chequered cement concrete tiles 200X200X25mm or 300x300x25mm thick, factory made, ISI marked (IS 13801-1993), with grey cement & pigment, laid with neat cement slurry as in path, pavement ,floors, etc. @ 3Kg/Sqm over & including 20mm thick screed bed of cement mortar (1:6), pointed in white cement with matching colour pigment, complete all as specified and directed.
M&L machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade with grey cement & pigment.
M&L for Coloured prepolished machine pressed precast concrete interlocking paver block with grey cement & pigment of any shape & size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade.
M & L Sand filling under interlocking coloured paver block average 25mm thick complete all as specified and as directed.
M& L for Providing, cement concrete type B1 1:2:4 (20 mm graded aggregate) in drain both side kerbs or mud stops, rounded or chamfered on edges complete all as specified
Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; water staging; posts and struts in fencing including cutting tops to shape as directed, drilling holes, otching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.
Dismantling fencing wire mesh any type.
Supply and Fixing chain link MS galvanised fancing (Diamond pattern) including line wire, wire dia 3mm to 4.06mm, any mesh size and typeto any type of standards, rails, straining bolts, etc. including provision of binding wire for straining and fixing to wood, concrete or steel posts with bolting or weilding, excluding provn of MS flats of any size at posts with bolting or weilding, complete all as specified and directed by Engr-in-Charge. Note: Only new MS flat to be paid separately.
Dismantling posts or struts (wood, steel or RCC) any section embedded in concrete,brick work, masonry etc, including taking out embedded portion and making good disturbed ground, posts embedded in concrete, brick work, masonry etc., complete all as specified.
Excavation in posts holes (or similar holes) each not exceeding 0.5 cubic metre, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 metre and good surface in soft/loose soil, complete all as specified.
S&F for post or struts in fencing Mild Steel angle iron 75 x 75 x 6 mm or other flat or round sections as required including cutting at top and bottom to shape as directed, including welding the cut portion at top, drilling holes, notching for wire, etc. mild steel round bar 6 mm dia nibs, connecting struts to posts with 2 Nos. mild steel bolts 50 mm long 10 mm dia and washers, complete all as specified.
Fixing only old post or struts in fencing Mild Steel angle iron of any size or other flat or round sections as required including cutting at top and bottom to shape as directed, including welding the cut portion at top, drilling holes, notching for wire, etc. mild steel round bar 6 mm dia nibs, connecting struts to posts with 2 Nos. mild steel bolts 50 mm long 10 mm dia and washers, complete all as specified.
M&L for Plain cement concrete (1:3:6) type C-2, using 40 mm graded stone aggregate in foundations, fillings and mass concrete, complete all as specified.
Fixing and restraining, resecuring incl making good staples etc, (Galvanised two strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing) to any type of standard rails including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as specified. (Each line of wire to be measured. )
Two coats of synthetic enamel paint over a coat of red oxide primer on new/old steel surface of any description, over 10 cm in width or girth, not otherwise described including preparation of steel surfaces, complete all as specified.
Amount of credit of Rs. 81169.40 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.
R. P. Suppliers and Construction Co.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .