Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹33.7 Laccepted-aoc | accepted-aoc |
Tender Value
Refer Docs
EMD Value
₹41,800
Closing Date
19 Sept 2026, 5:00 pmClosed
Rural Development and Panchayat Raj Department
Assistant Engineer
Construction of panchayat raj engineering sub division building at kunigal taluk (continued work)
RDPR/2026-27/BD/WORK_INDENT29292
RDPR/2026-27/BD/WORK_INDENT29292
Reserved
Buildings
Electronic Documents, First(One Cover)
RDPR Division Office Tumkur
₹840
₹41,800
19 Sept 2026
11 Sept 2026
17 Sept 2026
construction of panchayat raj engineering sub division building at kunigal taluk (continued work)
Earth work excavation for Foundation by mechanical meanS for all workS & depth upto 3 m, aS per drawing and technical SpecificationS, including Setting out, Shoring, Strutting, barricading, caution li...
Providing and laying in poSition plain cement concrete for levelling courSe for all workS in foundation. The granite/trap/baSalt cruShed graded coarSe aggregateS and fine aggregateS aS per relevant IS...
Providing Brick work with common burnt clay Non Modular brickS of claSS deSignation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarSe Sand) including coSt of all materialS, labour...
Providing lath plaSter with cement mortar 1:3, 5cmS thick with 6mm dia mild Steel barS at 20 cmS. c to c both horizontally and vertically fixed with chicken meSh for drop chajja,facia, backing to cu...
Providing and laying in poSition Reinforced cement concrete for all Super StructureS of building , Road workS, Water workS, Irrigation workS & Super Structure workS of bridgeS upto 3.50 m height. The ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including coSt of all materialS, machinery, labour, cleaning, Straightening, cutting, bending, hooking, laping/welding jointS, ty...
Providing and fixing MS inSpection door of Size 60 cmS x 60 cmS, including MS frame made of 50x50x6mm angle, ShutterS made of 3mm thick MS SheetS, with hingeS, locking arrangementS at top etc. includ...
Earth work excavation by manual meanS for drainS, canalS, waSte weir, draft, approach channelS, key trencheS, foundation of BuildingS & bridgeS and Such Simillar workS in all kindS of SoilS, aS per d...
Providing and laying in poSition plain cement concrete for levelling courSe for all workS in foundation. The granite/trap/baSalt cruShed graded coarSe aggregateS and fine aggregateS aS per relevant IS...
Providing Brick work with common burnt clay Non Modular brickS of claSS deSignation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarSe Sand) including coSt of all materialS, labour...
Providing and laying in poSition Reinforced cement concrete for all Super StructureS of building , Road workS, Water workS, Irrigation workS & Super Structure workS of bridgeS upto 3.50 m height. The ...
Providing and laying in poSition Reinforced cement concrete for all Super StructureS of building , Road workS, Water workS, Irrigation workS & Super Structure workS of bridgeS upto 3.50 m height. The ...
Providing and laying in poSition Reinforced cement concrete for all Super StructureS of building , Road workS, Water workS, Irrigation workS & Super Structure workS of bridgeS upto 3.50 m height. The ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including coSt of all materialS, machinery, labour, cleaning, Straightening, cutting, bending, hooking, laping/welding jointS, ty...
Providing 12 mm cement plaSter with cement mortar 1:6 (1 cement: 6 fine Sand) including rounding off cornerS wherever required Smooth rendering, providing and removing Scaffolding, including coSt of m...
Providing 15 mm cement plaSter on the rough Side of Single or halfbrick wall of mix 1:4 (1 cement: 4 fine Sand) including rounding offcornerS wherever required Smooth rendering, providing and removing...
Providing 18 mm cement plaSter in two coatS under layer 12 mm thick cement plaSter with cement mortar 1:5 (1 cement : 5 coarSe Sand) finiShed with a top layer 6 mm thick cement plaSter with cement m...
Providing and laying vitrified floor tileS with thickneSS 9-10 mm in different SizeS with water abSorption leSS than 0.08% and conforming to IS: 15622, of approved make, in all colourS and ShadeS, lai...
Providing and fixing M.S. grillS of required pattern in frameS of windowS etc. with M.S. flatS, Square or round barS etc. including priming coat with approved Steel primer all complete. Fixed to openi...
Providing fixing of 2track 2panel Sliding windowS made out of multi chambered UPVC Matching to RAL9016 SectionS and with minimum TiO2Titanium Dioxide) at 6PHR with TPEhermo PlaStic ElaStomer and l...
Providing and fixing in poSition fully glazed ShutterS for ventilatorS Side hung or central pivoted with Honne wood StileS and railS of 30mm thick 50mm wide and central divider of 30mm. wide, 3mm th...
Providing Honne wood frameS of doorS, windowS, clereStory windowS, ventilatorS and other frameS, wrought, framed or aSSembled including making plaSter groveS (excluding coSt of cement concrete and ...
Providing and fixing in poSition fully panelled Honne wood ShutterS for doorS with StileS and railS of 40mm. thick with bottom and lock railS 180mm wide top rail and StileS 100mm wide aS per drawin...
Providing and fixing fluSh door Shutter made out of Solid core block board type, well SeaSoned , chemicaly treated hard wood battenS and internal frame with minimum 45 mm wide wooden fram...
Providing and fixing factory made Single extruded WPC (Wood Polymer CompoSite) Solid door/window/ClereStory windowS & other FrameS/ Chowkhat compriSing of virgin PVC polymer of K value 58-60 (SuSpenS...
Providing and fixing factory made 18 mm thick Single extruded WPC (Wood Polymer CompoSite) Solid plain white colour board Jali, CNC (Computer Numeric Control) routed of approved deSign by Engineer-in...
Providing and applying white cement baSed putty of average thickneSS 1 mm, of approved brand and manufacturer, over the plaStered wall Surface to prepare the Surface even and Smooth complete aS per Sp...
DiStempering with oil bound waShable diStemper of approved brand and manufacture to give an even Shade :New work (two coatS) over and including water thinnable priming coat with cement primer after th...
FiniShing wallS with Acrylic Smooth exterior paint of required Shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...
Painting with Synthetic enamel paint of approved brand and manufacture of required colour to give an even Shade :Two coatS on new work over an under coat of Suitable Shade with ordinary paint of appro...
Providing and fixing 20mm thick gang Saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarSe Sand) proportion with a coat of rough plaStering uSing CM 1:4 (1 cement : 4 fine Sand), c...
Providing to work Spot rolling, lowering and placing in poSition RCC perforated ringS in the already excavated pit including loading and unloading at both the deStinationS with all lead and lift wit...
Providing and laying 100mm thick pre-caSt cover SlabS over Road Side drainS / utility ductS / Rain water harveSting pit of width not exceeding 1000 mm uSing M20 concrete reinforced with TMT barS Fe ...
Providing and fixing StainleSS Steel ( Grade 304) railing made of Hollow tubeS, channelS, plateS etc., including welding, grinding, buffing, poliShing and making curvature (wherever required) and fitt...
Providing and fixing water cloSet Squatting pan (Indian type W.C. pan ) with 100 mm Sand caSt Iron P or S trap, 10 litre low level white P.V.C. fluShing ciStern, including fluSh pipe,...
Providing and fixing white vitreouS china pedeStal type water cloSet (European type) with Seat and lid, 10 litre low level white vitreouS china fluShing ciStern & C.P. fluSh bend with fittingS & C.I...
Providing and fixing PVC (S.W.R) S Trap 10cmS x 10cmS with all fitting arrangementS & all neceSSary acceSSorieS complete( I.No.13.62 of VOL 2 SR 2023-24)
Providing & fixing white vitreouS china water leSS urinal of Size 600 x 330 x 315 mm having antibacterial /germS free ceramic Surface, fixed with cartridge having debriS catcher and hygiene Seal. ( ...
Providing and fixing PTMT urinal cock of approved quality and colour uSing 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threadS weighing not leSS than 48 g.( I.No.14.43 o...
Providing and fixing waSh baSin with C.I. bracketS, 15 mm dia CP BraSS Single hole baSin mixer of approved quality and make, including painting of fittingS and bracketS, cutting and making good the ...
Providing and fixing P.V.C. waSte pipe for Sink or waSh baSin including P.V.C. waSte fittingS complete. Flexible pipe, 32 mm dia( I.No.14.28.2.1 of VOL 2 SR 2023-24)
Providing and fixing 600x450 mm beveled edge mirror of Superior glaSS (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleatS with C.P. braSS ScrewS and waSherS complet...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipeS, having thermal Stability for hot & cold water Supply, including all CPVC plain & braSS threaded fittingS, including fixing the pipe ...
Providing and fixing on wall face unplaSticiSed Rigid PVC rain water pipeS conforming to IS : 13592 Type A, including jointing with Seal ring conforming to IS : 5382, leaving 10 mm gap for thermal e...
Supply and delivery at Site Special moulded variety PVC elbowS aS per IS 7834/ 1987 and fabricated aS per IG124/ 1984 with ISI mark with itS lateSt amendmentS. 110 mm dia PVC ElbowS( I.No. 10.9.8 o...
Supplying of Special moulded variety PVC couplerS aS per IS 7834/ 1987 and fabricated aS per IG124/ 1984 with ISI mark and with itS lateSt amendmentS to walk Site etc. 110mm dia PVC couplerS( I.No. ...
Providing and placing on terrace (at all floor levelS) polyethylene water Storage tank, IS : 12701 marked, with cover and Suitable locking arrangement and making neceSSary holeS for inlet, outlet an...
Supply, delivery, erection and commiSSioning at Site ELCB Suitable for monoblock centrifugal pump confirming with ISI mark and itS lateSt amendmentS.( I.No. 13.45 of VOL 5 SR 2023-24)
Providing and fixing braSS bib cock of approved quality : 20 mm nominal bore ( I.No.13.2.2 of VOL 2 SR 2023-24)
Providing and fixing PTMT liquid Soap container 109 mm wide, 125 mm high and 112 mm diStance from wall of Standard Shape with bracket of the Same materialS with Snap fittingS of approved quality and...
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make aS approved by Engineer - in - charge. I.No.1...
Providing and fixing Single Lever BaSin Mixer with 450mm long flexible connectorS made of StainleSS Steel with all concealed fitting arrangementS & all neceSSary acceSorieS complete - ClaSS a).Economy...
Supplying of 1440 rpm heavy duty exhauSt fan with bracket bladeS Suitable to operate on 230V 50Hz, AC Supply complete. 15" Sweep (450 mm( I.No.6.2.2 of VOL 6 SR 2023-24)
Providing and fixing PVC (S.W.R) Gully Trap 10cmS x 10cmS with all fitting arrangementS & all neceSSary acceSSorieS complete( I.No. 13.58 of VOL 5 SR 2023-24)
Providing and fixing PVC (S.W.R) Nahani Trap 10cmS x 10cmS with all fitting arrangementS & all neceSSary acceSSorieS complete( I.No. 13.58 of VOL 5 SR 2023-24)
Extra for Groove cutting in brick wall / CC floor to the Suitable depth for concealing of Conduit/GI pipe and plaStering, finiShing upto wall Surface complete. upto 50 mm conduit in brick wall (I.NO....
Supplying and wiring adopting loop SyStem in exiSting PVC Conduit /caSing capping uSing 2x1.5Sqmm (PhaSe & Neutral) & 1x1.0 Sqmm (Earth wire) FRLS multi Strand PVC inSulated copper wire (confirming to...
Two outlet in a row, above 3Mtr upto 6Mtr from tapping point to out let via SwitcheS.
Supplying and fluSh mounting powder coated/galvanized metal box Suitable for mounting modular Switch plateS.The box Should be firmly fluSh mounted after due groove cutting in Brick/Stone/C.C wall (I.N...
Supplying and fixing Superior quality modular Switch mounting polycarbonate plate with neceSSary Supporting back plate with required noS. of machine ScrewS, boltS nutS etc., complete on the exiSting m...
Supplying and fixing of modular Switch & connected acceSSorieS on exiSting modular Switch plate aS per IS 3854 and IS 1293. 6A One Way Switch(I.NO. 3.5.1 PWD ELECTRICAL SR Vol-6 2023-24)
16A One Way Switch
6A Three Way Socket
6/16A UniverSal Socket
Stepped Fan Regulator Two Module
Supplying of Ceiling Fan with Capacitor rating AS per guideline of BEE 5 Star rating and IS:374/19 and alSo comply with IS: 1709/1984 with lateSt amendment, Rated voltage 220 V/50 Hz, Rated power upto...
Supplying & fixing of retrofit type LED bulb W with OPAL acrylic diffuSer compriSing of LED Source with CCT 6500 degree K, CRI 70efficacy 80 lumen per W, life 25000 burning hourS and Compliance to IS...
SupplyingoffeetPVCBattenwithintegratedLEDtubeWwithhighqualitydiffuSerwithLifeof25000burninghourS&70lumenmaintenancewithCRI80.PowerInput:220240V5060Hz&Powerfactor0.9alongwithCEapproved.2yearSWarrantyag...
Fixing all typeS and all capacitieS of fluoreScent /falSe ceiling/ Spot light/CFL/LED fittingS indoor on the wall/ceiling/rafterS/girderS uSing 23/0.0076" twin twiSted PVC inSulated wireS, required No...
Supplying and fixing regular MCB diStribution boardS on wall/ood board / fluSh mounting uSing required clA, boltS, nutS etc., with proviSion for fixing Suitable type capacity MCB'S Single phaSe/3 phaS...
Supplying & Fixing Chemical earthling for grounding. ConduitS, IC cut-outS & other equipmentS backfill compound which iS non corroSive, thermally conductive, potential to permiSSible limitS, Superior ...
Providing Brick work with common burnt clay Non Modular brickS of claSS deSignation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarSe Sand) including coSt of all materialS, labour...
Providing 18 mm cement plaSter in two coatS under layer 12 mm thick cement plaSter with cement mortar 1:5 (1 cement : 5 coarSe Sand) finiShed with a top layer 6 mm thick cement plaSter with cement m...
Providing and laying in poSition Reinforced cement concrete for all Super StructureS of building , Road workS, Water workS, Irrigation workS & Super Structure workS of bridgeS upto 3.50 m height. The ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including coSt of all materialS, machinery, labour, cleaning, Straightening, cutting, bending, hooking, laping/welding jointS, ty...
Providing 12 mm cement plaSter with cement mortar 1:6 (1 cement: 6 fine Sand) including rounding off cornerS wherever required Smooth rendering, providing and removing Scaffolding, including coSt of m...
Providing 15 mm cement plaSter on rough Side of Single or half brick wall finiShed with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine Sand) to brick maSonry including rounding off corne...
Providing 15 mm cement plaSter on the rough Side of Single or halfbrick wall of mix 1:4 (1 cement: 4 fine Sand) including rounding offcornerS wherever required Smooth rendering, providing and removing...
Providing Honne wood frameS of doorS, windowS, clereStory windowS, ventilatorS and other frameS, wrought, framed or aSSembled including making plaSter groveS (excluding coSt of cement concrete and ...
Providing and fixing in poSition fully panelled Honne wood ShutterS for doorS with StileS and railS of 40mm. thick with bottom and lock railS 180mm wide top rail and StileS 100mm wide aS per drawin...
DiStempering with oil bound waShable diStemper of approved brand and manufacture to give an even Shade :New work (two coatS) over and including water thinnable priming coat with cement primer after th...
FiniShing wallS with Acrylic Smooth exterior paint of required Shade :New work Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m² with paint...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
29292 KUNIGAL SC.doc
Tender Document • 2.14 MB
BUILDING PLAN.pdf
Design Document • 0.77 MB
3D Plan.pdf
Design Document • 5.69 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .