Periodical services and welcome maint to MD/OTM Accn and installation at CQA(V) and DAD under GE(S) Ahmednagar

Amount

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortor complete all as specified and as directed.

Dismanlting floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar/cement lime mortar including all quoins, arches, pillars,etc, but including ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Taking down cement plaster on brick/ stone/ concrete wallls including raking out joints, hacking for key scrubbing down with water etc all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) including hard core complete all as specified and as directed.

Taking down aluminium window shutters with frame of any size and description at any location all as specified and as directed.

Taking down shutter of any description exc 1 Sqm & n.exc 2 Sqm each and refixing in same opening after easing and adjusting etc complete all as specified and as directed.

Taking up or down 15 mm bore dia GI steel tubing and connections complete all as specified and as directed.

Taking up or down 20 mm bore dia GI steel tubing and connections complete all as specified and as directed.

Taking up or down 25 mm bore dia GI steel tubing and connections complete all as specified and as directed.

M&L for hard core of broken stones of gauge exc 63 mm but n.exc 100 mm, deposited, spread and levelled in layers n exc15cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed.

M&L for brickwork with modular size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

S&F new first class wooden beads, straight (any size ) for gauged joinery including mitres and removing old beads after tightening & nailing of wire mesh including two coats of synthetic enamel paint over one coat of pink primer all as specified and as directed.

S&F in repairs, mild steel, 300 mm long, rat helical tail door spring including roller and roller plate complete all as specified and as directed.

S&F in repairs, 125 mm size extruded aluminium alloy handles, cast type, anodised all as specified and as directed.

S&F in repairs,continuous (Piano) hinges, mild steel, bright finish or electro galvanized of 30 mm width of flaps (when opened) complete all as specified and as directed.

S&F in repairs, 100 mm size, hasps and staple safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate, fixed with screws complete all as specified and as directed.

S&F in repairs, harrison curtain rails, 20 mm dia, mild steel, chromium plated, with fixing brackets, stops, rollers etc., complete all as specified and as directed.

S&F in repairs, 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel of brass polished, bright finished, complete all as specified and as directed.

S&F in repairs, peg set containing 06 hooks of aluminium anodised powder coated complete all as specified and as directed.

M&L in repairs for mild steel framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, ; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165. all as specified and as directed.

S&F aluminium anodised powder coated frame for windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and as directed.

S&F aluminium anodised powder coated window /ventilator shutters side hung type without sash bar, aluminium section weighing 0.55 kg/m (Minimum) including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading, screws etc complete anodised aluminium fittings suchas peg stays 150mm long(01 no.) hinges type B-21(2 no.) sutaible handle(01 no.) complete all as specified and as directed.

S&F powder coated aluminum windows, three track, made out of aluminium sections (make Jindal or equivalent) including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading, screws etc complete to be fixed with 5.5 mm itched glass and netlon wire mesh including taking down existing windows etc complete all as specified and directe and comprises of following sections :- (a) Window frame (i) Bottom-Section 20671 (Wt not less than 0.699 Kg/m) (ii) Top & Size - 20672 (Wt not less than 0.594 Kg/m) (b) Shutter (i) Vertical (end)- 20669 (Wt not less than 0.481 Kg/m) (ii) Vertical (lock) - 20689 (Wt not less than 0.481 Kg/m) (iii) Bottom - 20718 (Wt not less than 0.263 Kg/m) (iv) Top - 20668 (Wt not less than 0.377 Kg/m)

S&F in repairs, galvanised mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperature 1.18 mm, fixed with wooden beads / tinned tacks or galvanised wire staples to steel / wooden frame complete all as specified and as directed.

S&F in repairs, 18/19 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination & other side balancing with lamination,fixed with screws to timber frame work/wall for shutter and pelmet, complete all as specified and as directed.

M&L for special treatment to sunken portion with 10 mm thick plaster in CM 1:4 with WPC liquid complast 421 and applying one coat each of Nittoproof 100 and Nittoproof 120 on plaster surface. Rendering again 10 mm thick plaster in CM 1:4 mixed with complast 421 in sunken portion of WC and CI pipe joints shall be filled / jointed with mixture of cement, fine sand and Nittoproof 130 and provide hole in the wall and fix 600 mm long 20 mm dia GI spouts light grade 1:3:6 filling, floor area of WC/bath-room/toilet upto 1.5 Sqm etc. complete all as specified and directed by Engineer-in-Charge. Note- The rates includes for drilling of the hole RCC @ 1.00 m centre to centre, to a depth to a length of 30 mm and fixing of PVC pipes of dia 15/20 mm laid dry and grouting with cement slurry mixed with can bax 100 chemical with pressure grouting with minimm 3 Kg/Sqm all as specified and directed.

All as per serial item No 27 here-in-before but floor area of WC/bath-room/toilet exceeding 1.5 Sqm but not exceeding 3.0 Sqm.

M&L for 75mm thick, plain cement concrete, 1:4:8, type D-2, using 40 mm graded stone aggregate as in sub base of floor all as specified and as directed.

M&L for non - skid ceramic tiles, 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc.laid over and including 15 mm thick screed bed or bedding layer in cm 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles complete specified and as directed.

M&L for glazed ceramic tiles on vertical surfaces of wall, size 450mm x 350mm x 7 mm thick, laid over and including 10 mm thick rendering in cement mortar 1:4, set & jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles complete specified and as directed.

M&L for light colour vitrified tiles, 10 mm thick (Square or rectangular), area of each tile exc 0.36 Sqm but n exc 0.42 sqm as in floors, set and jointed in neat cement slurry & pointed in white or coloured cement to match colour of tiles, laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

All as per serial item No. 32 here-in-before but in verticle surfaces such as skirting/dado laid over 10 mm thick cement plastering in cement mortar 1:6 complete all as specified and as directed.

M&L for machine cut Cudappah stone slab 20-25 mm thick laid over and including 20 mm thick bedding layer CM 1:6 including roughening of old concrete floor surfaces by picking, sweeping clean and washing down with water to remove dust with pigments to match the shade of slab including cutting, rubbing and polishing complete all as specified and as directed.

M&L for machine cut kota stone flooring, 20-25 mm thick (size of kota stone slab 22"x22") laid over and including 20 mm thick bedding layer of cement mortar 1:6 jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed.

M&L for granite 20mm thick (of any type) table rubbed and polished green colour as in steps , jambs, pillars, windows cill, cooking platform and like in one piece laid over and inlcluding 10mm thick cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete all as specified and as directed.

Rounding the edges of stone slabs one edge, such as in steps, cooking platform, and other similar situation complete all as specified and as directed.

M&L for 10 mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surface, finished even and smooth with out using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on brick or concrete masonary surfaces other than fair face of brick surface finished even and smooth with out using extra cement complete all as specified and asdirected.

M&L for preparation of new plastered surfaces or previously untreated surface of wall and applying two coats of cement base paint over one coat of primer all as specified and as directed.

M&L for preparation of plastered or unplastered surfaces of walls and applying one coat of primer over a coat of 1 mm thick (average) white cement putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all specified and as directed

M&L for preparation of old decorated surfaces of walls and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old decorated surfaces of walls and applying two coats of white wash complete all as specified and as directed.

M & L for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

M & L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces of wall including filling the holes and cracks with white cement and applying one coat of oil emulsion distemper complete all as specified and as directed.

M & L for complete removal of existing treatment, preparation of surfaces of walls and applying one coat of alkali resistant primer over a coat of 1 mm thick (average) white cement putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all specified and as directed

M&L for preparation of old decorated plastered surfaces of ceiling including filling the holes and cracks with white cement and applying one coat of oil emulsion distemper complete all as specified and as directed.

M & L for complete removal of existing treatment, preparation of surfaces of ceiling and applying one coat of alkali resistant primer over a coat of 1 mm thick (average) white cement putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all specified and as directed

M&L for preparation of old decorated plastered surface of walls and applying one coat of cement base paint complete all as specified and as directed

M & L for complete removal of existing treatment, preparation of surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of old painted surfaces of wood or wood based materials of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paints complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for writing letters or figures in any approved colour of synthetic enamel paint (Block. Roman, Italic or Indian) n exc. 30 cm high complete all as specified and as directed.

M&L for writing stops, commas, short lines, dashes, hyphens, brackets, etc.in any approved colour of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old decorated surfaces of of walls and applying one coat of acrylic emulsion exterior grade paint all as specified and as directed.

M&L for preparation of plastered or unplastered or old decorated walls including cornices etc. and applying one coat of luster paint interior grade complete all as specified and as directed. Note : Work shall be executed by skilled persons as per manufacturer's instructions.

Hacking out of old broken glass (any thickness ,size quality or description) from wooden / metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

S&F 3 mm thick plain sheet glass and glazing with oil putty in square n exc 0.5 Sqm in each pane to steel windows including glazing pins etc. complete all as specified and as directed.

S&F 3 mm thick frosted/figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane to steel windows including glazing pins etc. complete all as specified and as directed.

S&F in repairs, PVC cover/lid for rotational mounded polythene water storage tanks any capacity including fixing with necessary device complete all as specified and as directed.

Disconnecting existing PVC tanks, exc 250 and not exc 500 Ltrs capacity, setting a side (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scales and dirt etc from mounts circulating pipe etc. complete all as specified and as directed.

All as per serial item no. 62 here-in-before but PVC tanks of capacity exc 500 and not exceeding 1000 Ltrs .

S&F in repairs, 500 Ltrs capacity, double layered, rotational moulded , polyethylene water storage tank (Cylindrical, vertical with closed top ) ,hoisted and fixed in position etc complete all as specified in SSR Pt I and as directed.

S&F in repairs, 1000 Ltrs capacity, double layered, rotational moulded , polyethylene water storage tank (Cylindrical, vertical with closed top ) ,hoisted and fixed in position etc complete all as specified in SSR Pt I and as directed.

S&F in repairs, ball valves, high pressure of 15 mm bore of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, (Minimum weight 142 gms) all as specified and as directed.

S&F in repairs, ball valves, high pressure of 20 mm bore of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, (Miniumum weight for 210 gm) all as specified and as directed.

M&L for 15 mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and as directed.

M&L for 20 mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and as directed.

M&L for 25 mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and as directed.

Fixing only old serviceable GI tubing 15 mm bore, with and including new fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

Fixing only old serviceable GI tubing 20 mm bore, with and including new fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

Fixing only old serviceable GI tubing 25 mm bore, with and including new fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F in repairs, 15 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed.

S&F in repairs, 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed.

S&F in repairs, stop valves,15 mm bore dia, fancy type, chromium plated cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs. 15mm dia, bib taps, fancy type, long body, chromium plated, cast copper alloy with crutch or butterfly handle screwed down, screed for iron pipe or brass ferrule, complete all as specified and as directed.

S&F in repairs, two in one bib tap, chromium plated, cast copper alloy for fixing of Jet /hand faucet/health faucet including flange complete all as specified and as directed. Make : ESS-ESS, Marc, Kingston, Jaguar, plumber

S&F in repairs, chromium plated, brass, wall mixure, 3 in 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, conneting legs and wall flange, full turn (Without hand & overhead shower) complete all as specified and as directed. Make : ESS-ESS, Marc, Kingston, Jaguar, plumber

S&F in repairs, brass, chromium plated, hand faucet, 15 mm bore of pipe including flexible connection pipe, complete all as specified and as directed. Make : ESS-ESS, Marc, Kingston, Jaguar, plumber

S&F in repairs, brass chromium plated swivel shower rose, 125mm size, including shower arm, fixed to steel pipe and union complete all as specified and as directed.

S&F in repairs, vitreous chaina wash basin, white, angle back, size ,600mm x 480mm, excluding taps, waste pipe, chain plug and porcelain stopper but including pillar taps, 15mm bore dia, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, brackets, waste couplings chromium plated, 32 mm bore complete all as specified and as directed.

S&F in repairs, towel rail, 600 mm long, PTMT, fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and as directed.

S&F in repairs, tubular towel rail, 20mm dia ‘D’ type 60cm long, brass chromium plated with brackets complete all as specified and as directed.

S&F in repairs towel ring of PTMT, fixed with and including Chromium plated brass screws and wooden/plastic cleats .(Minimum weight 90gms) complete all as specified and as directed.

S&F in repairs, soap dish, brass chromium plated, approximate size 160 mm x 100 mm x 90 mm, fixed to plugs with chromium plated brass screws & gutties, complete all as specified and as directed.

S&F in repairs, grating doom, 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and as directed.

S&F in repairs, grating doom, 100 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and as directed.

S& in repairs, shelf of PTMT, fixed with and including chromium plated brass screws and wooden / plastic cleats (Minimum weight 300gms) complete all as specified and as directed.

S&F in repairs, PVC Connection, 15 mm size with PTMT nuts, 600 mm long, complete all as specified and as directed.

S&F in repairs, angle valve, 15mm bore dia, fancy type, chromium plated, cast copper alloy screwed down high pressure screwed both ends for iron pipe and fixed complete all as specified & as directed.

S&F in repairs, vitreous China, white, squatting pan, Orissa pattern of size 580 mm X 440 mm width with integral foot rest, set in cement concrete including flush pipe and connecting to trap / flushing cistren and making good to floor complete all as specified and as directed.

S&F in repairs, vitreous china wash down water closet ( pedestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.

S&F in repairs, white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.

S&F in repairs, 10 ltr capacity PVC valveles , syphonic action type , flushing cistern ,low level , white with inlet ball valve and handle including brackets complete all as specified and as directed.

S&F in repairs, 75 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints,fixed to wall all as specified and as directed.

S&F in repairs, 110 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints,fixed to wall all as specified and as directed.

S&F in repairs, 75 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S&F in repairs, 110 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S&F in repairs, 75 mm dia PVC (SWR) bends with access door, of any radius complete all as specified and as directed

S&F in repairs, 110 mm dia PVC (SWR) bends with access door, of any radius complete all as specified and as directed

S&F in repairs, PVC (SWR) junction of 75 mm bore single, (single T) equal or unequal with access door, all as specified and as directed

S&F in repairs, PVC (SWR) junction of 110 mm bore single, (single T) equal or unequal with access door, all as specified and as directed

S&F in repairs, 75 mm dia PVC(SWR) nahani/floor trap with grtaing including jointing to waste pipe with solvent cement, , complete all as specified and as directed.

S&F in repairs, sinks with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm including CP coupling complete all as specified and as directed.

S&F in repairs, corner glass shelf double decker (triangular shape) of size 30 cm of lower and 25 cm of upper shelf fixed with steel screws and rawl plugs complete all as specified and as directed.

M/s Meher Construction

AMAR CONSTRUCTION

OM SAI ASSOCIATES

M/S. Z.K.ENTERPRISES, AHMEDNAGAR

DESIRES ENGINEERS &CONTRACTORS

M/S Atul Tejpal Shah

Mangesh Murlidhar Darwade