SPL REPAIR OF BLDG NO T75 T76 T77 NEAR SHEKHAWATI LINE PROVN OF 08 X WATER GEYSERS 25 LTR AND 08 EXHAUST FANS JCO OR BILLETS PANTRY AT DCN SUB GP PALAM AND ADDN ALTN OF ORS WASHROOM DSC WASHROOM IN P4 BUILDING AT DCN SUB GP PALAM UNDER

Amount

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as spd & directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as spd & directed.

Demolition of cement concrete (unreinforced) n. exc. 15cm thickness (below or above ground level) all as spd & directed.

Dismantling floor tiles/kota stone, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spd & directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls incl racking out joints, hacking for key, scrubbing down with water, etc. complete all as spd & directed.

Complete removal of existing treatment of painting by scraping, brusing, wahing down to open the brick or concrete original surface and raking out joints/ pointing in cement mortar to brick work in walls or to bricks on edge in floors, surface channels, roofs, etc complete all as spd & directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each complete all as spd & directed.

All as per item No. 7 above but n. exc 1.5 sq. m each.

Supply and fixing for factory made single extruded WPC (Wood Polymer Composite) solid door/window ot other frames/chowkats of size 50 x 75mm comprising of vergin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood poder/rice husk/wheet husk) and non toxic additive etc all as per SSR complete all as specified and as directed.

Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of vergin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additive etc all as per SSR 2020 complete all as specified and as directed.

M&L for powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,(handles 2 Nos in each door, 15mm aluminium hinges-3 Nos each door, 15mm Aluminium tower bolt 02 Nos each door), anodised aluminum snap beading screws etc. complete all as specified.

M&L for powder coated Anodised aluminium frame for doors, windows, ventilators, grill, partitions, sliding tracks, aluminium section for shutters suitable for two/three/four track window and aluminium section sliding members incl all necessary fittings and fixtures, jointing cleats, rubber packing, silicon packing etc complete all as specified and directed. (note : measured only aluminium part as per SSR part-1)

S&F aluminium powder coated louvered ventilator with 4 mm thick pin headed glass and 100 mm wide glass strips, white framed and fixed with aluminium anodised frames etc including taking down existing old window of any description complete as specified and directed.

M&L for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed to door / window (steel/wooden) complete all as specified & directed.

S&F aluminium anodised barrel tower bolt 150 mm size of extruded section complete all as specified and directed.

S&F aluminium handles cast type anodised 150 mm size complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F stainless steel hinges medium weight, 100 mm size fixed to doors complete all as specified and as directed.

M&L 20mm CPVC pipes SDR 11 with all plain CPVC SDR 11fittings and fixed complete to walls, ceiling or laid in floor including taking up or down old steel tubing and connections all as spd and directed.

M&L 25mm CPVC pipes SDR 11 with all plain CPVC SDR 11fittings and fixed complete to walls, ceiling or laid in floor including taking up or down old steel tubing and connections all as spd and directed.

S&F in repair Chromium plated brass long body bib tap fancy type 15 mm bore dia complete all as specified and directed.

M & L in repairs for Gun-metal, globe or gate valves, with iron wheel head, screwd both end sor iron pipe and fixed 20 mm dia complete all as specified and directed.

S&F in repair 15mm bore angle valves, fancy type, cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle, complete all as specified and directed.

S & F in repairs for 15 mm bore brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified.

S&F CP grating suitable for 75/100/125mm with waste hole or without hole bore floor trap and fixed with white cement complete all as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts complete length 600mm complete all as specified and directed.

S&F fancy type brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern) incl P or S Trap of cast iron , white and connection with cistern complete all as specified and directed.

S&F in repair Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed.

S&F plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device of approved colour and as per existing model complete all as specified and directed.

S&F in repair 15mm CP brass health faucet (hand shower), inlet length100mm fixed to angle valve with and including decorative choice flexible pipe, wall hanger etc all as directed.

S & F under counter basin ovel size 195x600x425 complete as specified and directed by Engr-in-Charge.

S&F for Brass Chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S&F in repair rotational moulded polythelene water storage tank (cylindrical, vertical with closed top) 1000 ltrs capacity (ISI Marked) incl necessary fitting like tank cover, nipple, socket etc, hoisted and fixed in position complete all as spd & directed.

S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 40mm-690gms/) complete all as specified and as directed.

S&F in repair 10 ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed.

M&L for 75mm out let dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F 75mm PVC (SWR) pipes single socket in any length with rubber ring joints, fixed to wall or laid in trenches complete all as specified and as directed.

S&F in 75mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F in 75mm bore PVC (SWR) bends with acess door any radius all as specified and directed

S&F 110mm PVC (SWR) pipes single socket in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

S&F 110mm bore PVC (SWR) bends any radius all as specified and directed

S & F stack clamp made of 50 mm X 5 mm flat iron and 16 mm dia round iron stay including nut bolts and securing ends of stay to wall or roof suitable for 110 mm bore pipe complete all as specified and directed.

S&F in repair 100mm CI Bends (any radius), diminishing pieces or tapers (larger bore measured) fixed with lead joint complete all as specified and directed

S&F in repair for 100mm bore dia cast iron Branch pieces,double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fixed with lead joint complete all as specified and as directed.

S&F 100mm bore cast iron P or S traps fixed with lead joint all as specified and directed.

S&F in PVC waste pipe 600/900mm long suitable for urinals including connecting all as specified and as directed.

S&F in repair 100mm bore cast iron soil waste and vent pipe (Cast type) in any length with or without ears with lead joints fixed to walls or laid in floor etc complete complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coated (150GSM) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering, ridge, fixed with self tapping screws complete all as spd & directed.

S&F Pre-painted galvalume aluminium zinc coated (150GSM) GI based machine moulded profile ridge/corrugated steel sheet ridge 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering, fixed with self tapping screws complete all as spd and directed.

S&F false ceiling with powder coated GI grid of size 600x600 mm using main Tee of size 24x28x0.40mm prepunched to accept cross tee of size 24x28x0.40mm and wall angles of size 25x25x0.40mm fixed with wall around of size with and including 4mm thick fiber cement board white colour designer tiles as approved by GE of size 595x595 mm placed in the grid and held in position duly suspended by 4mm dia GI wire hanger from the roof with holding down clips, butter fly clips and necessary provision for light fixture etc complete as per manufacturers instructions complete all as spd & directed including dismantling old false ceiling any type complete all as spd & directed.

M&L for brick work with sub class 'B' old size bricks in CM 1:6, straight or curved on plan exc 6 m mean radius complete all as spd & directed.

Dismantling framed timber scantlings any size in section, in any position (as in purlins etc) complete all as spd & directed.

M&L for Steel work in tubular trusses of squar/rectangular hollow section including special shaped washer, cleats, plates etc. complete conforming to I.S complete all as spd & directed.

M & L for providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates in roof parapet coping, roof kerb or mud slops and the like including weathering, slightly rounded or chamfered angles and throating as directed) complete including necessary form work complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded aggregate) for plinth protection over rammed earth finished even & fair complete all as spd and directed.

M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm graded stone aggregate as in levelling couse of sub base all as specified and directed.

M&L for 15mm thick screed bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for 10mm thick Virified Ceramic tiles (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick Screed bed in CM 1:6 complete all as specified and as directed.

M&L for 7 to 8mm thick Glazed ceramic coloured tiles in vertical surface area of each tiles exceeding 0.11 sqm but not exceeding 0.16 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing in CM 1:4 complete all as specified and as directed.

M&L for Non - skid Ceramic colour tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for rendering 12-15mm thick ready mixed plaster on any type brick work or concrete surfaces complete all as spd & directed. "Height of Bldgs upto 4 storey".

M&L for providing not exceeding 1mm thick wall care putty on wall surface exterior/interior grade complete all as spd & directed.

M&L for preparing surface of wall and applying two coat of oil bound distemper all as specified and directed.

Material & Labour for applying and finishing walls surface with two or more coats of premium Acrylic Smooth exterior paint of required shade over and including priming coat of exterior primer complete all as spd & directed.

Demolition of cement concrete (unreinforced) n. exc. 15cm thickness (below or above ground level) all as spd & directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of syntethic enamel paint over one coat of red oxide Zink chrome complete all as spd & directed.

M&L for preparation of old steel surface and applying two coat of synthetic enamel paint on roof truss surface and similar work complete all as specified and directed.

M&L for RCC 1:2:4 nominal mix using 20mm graded stone aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finish surface complete all as specified and as directed.

M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, incvluding cranking, binding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, uinal Partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as spd & directed.

Surface excavation n exc 30cm deep and averaging 15cm deep getting out in hard/dense soil complete all as specificed and as directed.

M&L for 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base flooring complete all as specified and as directed.

M&L for Pre-polished machine pressed Chequered cement concrete tiles glossy finish 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F pre cast concrete block for kerb stone with solid block ex 10cm in width type C1, 1:3:6 (using 20mm graded stone aggregate ) set in CM 1:6 of any shape and size. Kerb stone shall be fixed in true line and level or incurves for edging of road side path including embedding in ground to any depth as reqd.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr depth for fdn etc for soft manhole not exc 10 sqm on plan and getting out any type of soil complete all as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

S&F factory made SFRC drain cover 75mm thick size not exc .75sqm each complete all as specified and directed.

M&L for cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) in surface channels and drains finishing the exposed surfaces of concrete to fair and even complete all as specified and directed.

Demolition and breaking of 200 mm dia drain pipe (salt glazed where AC or reinforced concrete) set in cement mortar complete all as specified & directed.

M&L for cement concrete 1:4:8 type C-2 using 40mm graded agg incl packing under and haunching against sides of 200mm dia (Internal dia) pipe after they are laid and tested complete all as specified (Thickness of concrete bed 150mm) complete all as specified & directed.

M&L for Reinforced concrete pipe class NP2, 200mm dia laid in trenches & jointed in cement mortar (1:2) with collars complete all as specified and directed.

M&L for impregnating cream for injection into masonary or concrete wall 230mm thick against capilary rising humidity, rising bar super strong (Product No 201) of chowgale building chemicals or equivalent in pidilite/Dr Fixit/Sika/Phosrock complete all as specified and directed. Method of application:Methodology (a) The surface must be sound, absorbent, clean, free of dust, oil, paint, curing agents, loose cement or lime plaster & concrete, debrish, or any separation layers. (b) The plaster must be knocked off at least 50 cm beyond the visibly penetrated area. (c) Damaged mortar joints are to be scraped out to a depth of approximately 2-3cm. All sharp edge/joints need to be levelled, loose concrete to be removed. (d) Drill boreholes at ground level horizontally, The boreholes are drilled horizontal into the masonary at the distance of 250mm centre to centre.

Taking down carefully copper/aluminium point wiring (light/fan socket or power) complete including fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc and removing the material from site including making good the disturbed surface to match with the existing all as specified and directed by Engineer-in-charge.

Material and labour for concealed point wiring with PVC insulated unsheathed multistranded colour code copper conductor in PVC conduit with FRLS cable1.5 Sqmm size 1100 volts grade conforming to IS:694 in new modular metal flush box of 1.6 mm thick including one coat of synthetic enmelled black paint and providing modular white cover plate with frame of suitable size of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit all as specified and directed by Engr-in-charge for the following :-(a) One light/fan/Exhaust fan/bell point controlled by one switch.

(b) All as per item No. 90 here in before but for One 5 Amp socket out let independent.

(c) All as per item No. 90 here in before but for One 5 Amp socket out let on same board

Material and Labour for concealed point wiring with PVC insulated unsheathed multistranded FRLS copper conductor in PVC conduit with cable 2.5 Sqmm size 1100 volts grade conforming to IS:694 in new modular metal flush box of 1.6 mm thick including one coat of syenthetic enamelled black paint with new modular white cover plate with frame of suitable size of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 1.5Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit for One 3 Pin socket 15A/modular MCB box outlet Indepentent board.

S&F Modular switch 1 way 6 A, 1 module complete all as specified and directed.

S&F Modular switch 1 way 16 A,1 module complete all as specified and directed.

S&F of Modular socket outlet 6 A, 2/3 pin, combined 2 module complete all as specified and directed.

S&F of Modular socket outlet 16 A, 2/3 pin, combined 2 module complete all as specified and directed.

S&F polycarbonate ceiling rose 3 pin flush type 6 A 250 V AC with ISI mark including ring for jumbo ceiling rose complete all as specified and directed.

Supply and fixing LED FLAT PANAL Aesthetically designed 2x2 for surface mounting which provides soft-light and glare free symmetrical illumination 34 W complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F single pole MCB 6 to 32Amps 240 v, 50 Hz AC suitable for 'B' Series" conforming to IS 8828 of 1996 including taking down old MCB's all as specified.

S&F of SPN 40 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity and terminal box suitable upto 63 sqmm cable complete conforming to IS 8828 of 1996 all as specified.

S&F in repair of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

Supply, laying and drawing in and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including connection all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed.

S&F of factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-54 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 160, 4 pole MCCB and ELM as incommer and 12 SP MCBs outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB including taking down old DBs all as specified. NOTE :- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. Make: Legrand cat part No:507758

S&F in of MCCB 125 Amp 4 pole 16 KA at 415 V with fixed thermal megnatic release complete all as specified directed.

S&F single pole MCB 63 Amps 240 v, 50 Hz AC suitable for 'B' Series" conforming to IS 8828 of 1996 including taking down old MCB's all as specified.

S&F of electric storage water heater of capacity 25 ltr BEE 5 star with vtreous enamel coating with all accessories and fittings arrangements and testing after installation complete all as specified and directed.

S&F bib taps 15 mm fency type with crutch or butterfly handle, screwed down screwed for GI pipe.

S&F stop valve 15 mm fency type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for GI pipe.

S&F GI tubing pipes galvanized medium class supplied and laid complete including fittings 15mm (1/2") dia.

Cutting of existing water supply main any size upto 25 mm for taking branch connection of size 15 mm incl insertion of Tee unegual all as required at site or directed by Engr-in Charge.

Taking down existing ceiling fan of any make and sweep and deposited to MES store yard complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fixing 250 mm PVC Fresh Air exhaust fan single phase, 230/240 V With Louvre including cutting of holes in a round shape (Precast piece to be incorporated for smooth and ever finish) and including fixing the exhaust fan complete all as specified.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed.

M&L for modular AC Box with 20A SP mini MCB,Plastic enclosure & unbreakable Heavy Duty ISI mark Plug Top complete set dully concealed in wall complete all as specified and directed.

Deduct Credit: for demolished/dismantled material of (-) Rs 125368.80 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum

LAXMI BUILDERS

S GOURAV PRAKASH ENTERPRISES

JAIPAL AND BROTHERS

L G BUILDERS

M/S Davinder Kumar

A R construction

UNIQUE BUILDERS

M/s Verma and Co

M/s M M BAHL

M/S Yamin