Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.8 LAccepted-AOC VILL PUILLYA PO UNSANI DISTT HOWRAH PIN 711302 | HOWRAH | WEST BENGAL | 711302 | L1 | Accepted-AOC Being lowest bidder and reasonable | |
| 2 | L2₹37.9 L+₹1.9 L (5.40%)Rejected-Finance BHANGARMATH THAKURANI CHAWK PO SAMABYPALLY BALLY HOWRAH 711 205 WEST BENGAL | HOWRAH | WEST BENGAL | 711205 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹38.3 L+₹2.3 L (6.47%)Rejected-Finance 01 PATHWALIYA GONDA GONDA GONDA UTTAR PRADESH 271001 | GONDA | UTTAR PRADESH | 271001 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹38.9 L+₹2.9 L (8.16%)Rejected-Finance 165 UTTAR KASTODANGA ROAD KOLKATA 700 061 | KOLKATA | KOLKATA | WEST BENGAL | 700061 | L4 | Rejected-Finance Other than lowest |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
18 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
REPAIR/MAINT TO FLAG STAFF HOUSES AND CONNECTED AREAS INSIDE FORT WILLIAM UNDER GE(FW) KOLKATA
2022_MES_554724_2
8906/FW/E8
Open Tender
Civil Works
Item Rate
210 days
GE (FW) Kolkata
Ref as per tender documents
7 documents required · 7 mandatory
₹500
GE (FW) Kolkata
₹70,000
13 Dec 2022
3 Nov 2022
19 Nov 2022
3 Nov 2022
18 Nov 2022
3 Nov 2022
Amount
Taking down cement plaster on brick or concrete surfaces incl racking out joints, hacking for key, scrubbing down with water etc. all as specified and directed.
Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as specified and directed.
Dismantling stone slabs and tiles, laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.
Demolition of plain cement concrete in ground floors and pavings not exc 150 mm thickness (above or below ground level) complete all as specified and directed.
Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.
Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area not exceeding 1.5 sqm each and removing from the site complete all as specified and directed.
Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area exceeding 1.5 sqm and not exceeding 4 sqm each and removing from the site complete all as specified and directed.
Taking down shutters of any description area not exceeding 1.00 sqm each and removing from the site complete all as specified and directed.
Taking down shutters of any description area exceeding 1.00 sqm and not exceeding 2.00 Sqm each and removing from the site complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, steel window or stone concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed.
Dismantling structural steel work of any description including doors, gates, railing etc but excluding framed trusses complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Dismantling unframed timber scantling 40 Sqcm and over in section, in any position complete all as specified and directed.
Dismantling of ceiling board incl snap grid frame of any thickness including cover fillets complete all as specified and directed.
Dismantling of wall board as in lining, panelling etc, of any gauge or any thickness including cover fillets complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting any gauge or any thickness in roof covering including stacking serviceable materials of re-use and removing unserviceable materials complete all as specified and directed.
Removal of existing water proof treatment of any description from roof surface including cement plaster/screed bed carefully from the surfaces, roughening concrete surfaces and cleaning the roof surfaces by brushing, sweeping and scrubbing down with water and removal of debris complete all as specified and as directed.
M&L for applying one coat of white wash to old decorated (white washed) surfaces of wall including preparation of surfaces complete all as specified and directed.
M&L for applying one coat of white wash to old decorated (white washed) surfaces of ceiling including preparation of surface complete all as specified and directed.
M&L for applying one coat of acrylic distemper, finished with rollers to old decorated surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.
M&L for applying one coat of acrylic distemper, finished with rollers to old decorated surfaces of wall over a coat of alkali resistant primer including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.
M&L for applying two coats of acrylic distemper, finished with rollers to old decorated surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.
M&L for complete removal of existing treatment on walls including cleaning, watering to make the surface clean and free from dust and applying 1.5 mm thick wall putty for smooth finish and finishing with two coats of acrylic distemper, finished with rollers over a coat of alkali resistant primer complete all as specified and directed.
M&L for applying one coat of acrylic distemper, finished with rollers to old decorated surfaces of ceiling including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.
M&L for applying one coat of acrylic distemper, finished with rollers to old decorated surfaces of ceilings over a coat of alkali resistant primer including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.
M&L for applying two coats of acrylic distemper, finished with rollers to old decorated surfaces of ceiling including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.
M&L for applying one coat of cement base paint using brush to old decorated surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.
M&L for applying one coat of synthetic enamel paint to old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
M&L for applying one coat of synthetic enamel paint to old painted wooden surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
M&L for applying one coat of synthetic enamel paint to old painted brick, stone, concrete, asbestos cement or plastered surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
M&L for applying one coat of varnishing on old treated wooden surfaces of any description over 10 cm width or girth including cleaning and preparation complete all as specified and directed.
M&L for complete removal of existing treatment on old painted surfaces of walls and soffit of chajja, roof slab etc. by using high pressure jet washer including cleaning the surface by scrapping as required using emery paper, putty blade/scraper as applicable for removing loose paint, corrosion, algae formation etc., to make the surface clean and free from dust, for upto 4 storey height including necessary scaffolding, safety and protective measures complete all as specified and directed.
M&L for complete removal of existing treatment on old painted surfaces of walls and soffit of chajja, roof slab etc. by scrapping and removing treated surfaces with mechanical wall sander (having vacuum mechanism for suction) having minimum 1500 RPM, sanding pad of 80 grit size having 7"- 9" dia (as required) including cleaning, watering to make the surface clean and free from dust, for upto 4 storey building height including necessary scaffolding, safety and protective measures complete all as specified and directed.
M&L for applying 2mm thick wall care putty (in two layers) on old cleaned surfaces of walls, soffits of chajja, roof slab etc, for smooth finish and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length for upto 4 storey building height including necessary scaffolding, safety and protective measures complete all as specified and directed.
M&L for preparation of old treated/painted surfaces of walls and soffit of chajja, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from loose paint, algae formation, dust etc including necessary safety & protective measures such as safety belt, headgear etc including filling cracks upto 5mm with and including suitable elastomeric crackfill paste and applying one coat of weather proof exterior emulsion paint of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed. (NOTE: Area prepared under Item No 32 & 33 shall not be measured under this item)
M&L for preparation of old painted brick, concrete, stone, asbestos cement or plastered surfaces of any description over 10 cm width or girth and applying one coat of acrylic emulsion/plastic emulsion paint, finished with rollers complete all as specified and directed by Engineer-in-Charge.
S&F in repair 35mm thick precast cement concrete (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) as in louvers and jallies including all moulding, set in cement mortar 1:4 incl dismantling existing unsv jali complete all as specified and directed.
M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection/Paving etc, finished even and smooth without using extra cement complete all as specified and directed.
M&L Cleaning of floor with water & polishing with wax polish as per manufacturer's instruction complete all as specified and directed. (Make of wax Polish: Mansion or equivalent make as approved by GE)
M&L for water proof film coating (elastic and breathable), in two layers (as per manufacturer's instructions), for patch repair of damp and repaired walls over old or new plastered surfaces of walls including preparation of surfaces complete all as specified and directed. (Make: Dr Fixit, Sureseal or equivalent product in other makes of chemical/paint specified in tender)
M&L for brick work using old size fly-ash bricks straight or curved on plan exec 6 metre mean radius, built in cement mortar 1:6 complete all as specified and directed.
M&L for brick work using old size fly-ash bricks straight or curved on plan to any radius in half brick wall, built in cement mortar 1:4 complete all as specified and directed.
M&L Rendering 15mm thick, on fair faces of brick or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.
M&L 10 mm thick rendering on ceiling surfaces in cement mortar 1:3 , finishing even and smooth without using extra cement including necessary scaffolding complete all as a specified and directed.
M&L Preparation of new plastered surfaces of ceilings and finished with two coat of acrylic distemper, finished with rollers over a coat of alkali resistant primer complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from protrutions, loose particles, dust etc including necessary safety & protective measures such as safety belt, headgear etc, finishing the surface with 1.5 mm thick wall putty for smooth finish and finishing with two coats of acrylic distemper, finished with rollers over a coat of alkali resistant primer and necessary scaffolding for any building height complete all as specified and directed.
S&F in repair coloured (any) PVC seat cover for EWC of any description with hinging device complete all as specified and directed.
-ditto- but white seat cover for EWC
S&F in repair Plastic seat & cover, white, soft close type, for coupled water closet (of any description) incl chromium plated hinge complete all as specified and directed. (Make : PARRYWARE, Cat No: E8300 / PRAYAG, Cat No: 725 or equivalent model in JAQUAR / CERA / HINDWARE)
S&F in repairs stainless steel round grating 127mm dia complete all as specified and directed. (Make : PRAYAG, Cat No: FT-64 or equivalent make as approved by GE)
S&F in repair chromium plated Hand shower (health faucet), ABS body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed. (MAKE : ESSCO, Cat No : ALE-ESS-583/ JAQUAR, Cat No: PRS-031/ CERA, Cat No: F8030401AB / ASIAN PAINTS, Cat No: C-232N / HINDWARE, Cat No: F160013 / PARRYWARE, Cat No: E8352A1)
S&F in repair Vitreous China Wash Hand Basin 550mm x 400mm in size, white, Flat Back or Angle Back Type, making good disturbed Surfaces in Cement Mortar 1:3, providing CP waste coupling and PVC waste pipe and connected Items, complete all as specified and directed. (Make of WHB : PARRYWARE, Model: FLAIR / HINDWARE, Model: MARIO / JAQUAR, Model: CONTINENTAL / CERA, Model: CLAIR) (NOTE: Waste coupling and Waste pipe shall be measured and paid seperately)
-ditto- but coloured wash hand basin complete
S&F in repair vitreous china, white, counter top wash hand basin, including providing 32 mm dia chromium plated waste coupling and making all necessary connections complete all as specified and directed. (Make of Basin : Hindware, Cat No: 10038 / CERA, Cat No: S2030101 / Parryware, Cat No: C0431) (NOTE: Waste coupling and Waste pipe shall be measured and paid seperately)
S&F in repair CP bottle trap (premium range) with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed (Make: JAQUAR, Cat No: ALD-769L250x190 / HINDWARE, Cat No: F850003/CERA, Cat No: F8060302/ PRAYAG, Cat No: BEA-26 / PARRYWARE, Cat No; T3202A1)
S&F in repair sinks with drainage board made of stainless steel 1 mm thick in kitchen with plug washers, waste coupling, PVC waste pipe and fixing cantilever brackets connecting union to pipe, overall size of sink 914 mm x 460 mm and bowl size 405 mm x 354 mm x 203 mm complete complete all as specified and directed. (MAKE : CERA, Cat No: B4512201 /PRAYAG, Cat No. 1339D / PARRYWARE, Cat No: C855099 or equivalent model in NIRALI / ANJALI / JAYNA) (NOTE: Waste coupling and Waste pipe shall be measured and paid seperately)
S&F in repair chromium plated brass waste coupling, 32 mm size, full threaded complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-11 / JAQUAR. Cat No: ALD-705/ CERA, Cat No: F8050101 /PARRYWARE, Cat No: T9911A1 / HINDWARE, Cat No: F850002)
S&F in repair strainer for kitchen sinks, round, complete all as specified and directed. (Make: PRAYAG, Cat No: SA-03 or equivalent item as approved by GE)
S&F in repair 32 mm bore PVC corrugated waste pipe, 800 mm long for wash hand basins complete all as specified and directed. (Make: PRAYAG, Cat No: 327 or equivalent make as spproved by GE)
S&F in repair 32 mm bore PVC collapsible waste pipe, 800 mm long complete all as specified and directed. (Make: PRAYAG, Cat No: 3272 or equivalent make as spproved by GE)
S&F in repair 32mm CP Waste coupling (half threaded) complete all as specified and directed. (MAKE : PRAYAG, Cat No: BEA-10 / CERA, Cat No: F8050101 / PARRYWARE, Cat No: T9910A1 /JAQUAR. Cat No: ALD-705/ HINDWARE, Cat No: F850023)
S&F in repair angle valve, 15 mm bore, cast copper alloy, chromium plated fancy type, concealed type with wall flange fixed to iron pipe complete all as specified and directed. (Make : PARRYWARE, Cat No: G4807A1 / JAQUAR, Cat No: FUS-29053 / CERA, Cat No: F1015361 / ASIAN PAINTS, ALAC101 / HINDWARE, Cat No: F390005 / PRAYAG, Cat No: 9010)
S&F in repair Chromium plated brass Towel ring (premium range) complete all as specified and directed. (Make : JAQUAR, Cat No: ACN-1121BN / PARRRYWARE, Cat No: T6002A1 / PRAYAG, Cat No: BA-11 / CERA, Cat No: F5002105 / HINDWARE, Cat No: F880007)
S&F in repair Chromium plated brass Wall mixer, concealed type, with concealed body, with overhead shower arrangement fixed with 15 mm bore Iron pipe including taking down existing mixer complete all as specified and directed. (Make : JAQUAR, Cat No : FUS-29273UPR / PARRYWARE, Cat No: G4816A1 / CERA, Cat No: F1003401 / ASIAN PAINTS, Cat No: ALWM103 / PRAYAG, Cat No: 9375-N / HINDWARE, Cat No: F390020)
S&F in repair Chromium plated brass Wall mixer, concealed type incl concealed body, with both overhead and telephone shower arrangement, fixed with 15 mm bore Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No : FUS-29281/ PARRYWARE, Cat No: G4817A1 / CERA, Cat No: F1003403 / ASIAN PAINTS, Cat No: ALWM104 / PRAYAG, Cat No: 9380-N / HINDWARE, Cat No: F390022) NOTE: Telephone shower shall be measured and paid seperately.
S&F in repair fancy type chromium plated telephonic hand shower (ABS Body), multiflow type with flexible tube and hook screwed for iron pipe including frame complete all as specified and directed. (Make : JAQUAR, Cat No: HSH-1939 / CERA, Cat No: F7030103AB / ASIAN PAINTS, Cat No: HS-104 / HINDWARE, Cat No: F160050 / PRAYAG, Cat No: BHS-90 /PARRYWARE, Cat No: T9819A1 )
S&F in repair 15mm bore galvanised steel tubing (medium grade) with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.
S&F in repair 20mm bore galvanised steel tubing (medium grade) with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.
S&F in repair 15mm bore chromium plated single lever central hole basin mixer (premium range) without popup waste system with 450mm long copper pipe and brass nut, complete all as specified and directed. (MAKE : JAQUAR, Cat No: ARI-39001B / CERA, Cat No : F1005451 / ASIAN PAINT, Cat No: MYBM101 / HINDWARE, Cat No: F360011/ PRAYAG, Cat No: 8151 /PARRYWARE, Cat No: T3814A1)
S&F in repairs Chromium plated brass Pillar tap (premium range), fancy type. with areator, fixed to wash hand basin, complete all as specified and directed. (Make : JAQUAR, Cat No: ARI-39011 / CERA, Cat No: F1005101/ ASIAN PAINTS, Cat No: MYPC101 / HINDWARE, Cat No: F360001 / PRAYAG, Cat No: 8102 / PARRYWARE, Cat No: T3802A1)
S&F in repair 15mm bore chromium plated two way bib cock with flange (premium range), fancy type complete all as specified and as directed. (Make : JAQUAR, Cat No: CON-041KN / CERA, Cat No: F1005161 / ASIAN PAINTS, Cat No: MYBC102 / PRAYAG, Cat No: 8111 / HINDWARE, Cat No: F390004 / PARRYWARE, Cat No: G1434A1)
S&F in repair Chromium plated brass Bib cock with wall flange (premium range), fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No: ARI-39037/ CERA, Cat No: F1005151 / ASIAN PAINTS, Cat No: MYBC101 / PRAYAG, Cat No: 8108 / HINDWARE, Cat No: F390003 / PARRYWARE, Cat No: G1434A1)
S&F in repairs toilet paper holder, surface type with flap incl taking down existing holder complete all as specified and directed. (Make : JAQUAR, Cat No : ACN-1153N / CERA, Cat No: F5007110 / PRAYAG, Cat No: BA-08 / HINDWARE, Cat No: F880003 / PARRYWARE, Cat No: T6514A1)
S&F in repair chromium plated brass over head shower rose with arm (premium range), with 3 flow, fixed to 15mm bore of iron pipe including taking down existing shower complete all as specified and directed. (Make : CERA, Cat No: F7040103 (for arm) & F7020305 (for shower) / PARRYWARE, Cat No: T9802A1 (for arm) & T9986A1 (for shower)/ HINDWARE, Cat No: F160051)
S&F in repair Aluminium body (extruded section) door closer hydraulically regulated, designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg complete all as specified and directed. (Make : Godrej, Cat No. 1938 or equivalent make as approved by GE).
S&F in repairs towel rack (premium range) with lower hangar with hook complete all as specified and directed. (Make : JAQUAR, Cat No: AHS-1581H / PARRYWARE, Cat No: T6008A1 / CERA, Cat No: F5003101 / PRAYAG, Cat No: BA-12/HINDWARE, Cat No: F890012)
S&F in repairs, Tubular towel rail (premium range), 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed. (MAKE : JAQUAR, Cat No : ACN-111SM / PARRYWARE, Cat No : T6401A1 / CERA, Cat No: F5004103 / PRAYAG, Cat No: BA-20 / HINDWARE, Cat No: F840013 )
S&F in repairs Stainless steel kitchen rack of size 31" x 24" x 10" fixed in wall with screws and washer complete all as specified. (Make- Prayag , Model No- P-340 or equivalent model in SUYOG / BLUE STAR / ANUPAM INDUSTRIES)
S&F in repair 6mm thick bevelled edge mirror of size as required fixed on 6mm thick acrylic PVC sheet complete all as specified and directed.
S&F in repair vitreous china floor mounted coupled closet (Pedestal pattern), white, including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC white soft close seat cover and connecting fittings complete all as specified and directed. (Make :CERA, Model : CLAIR DELUXE / PARRYWARE, Model: CASCADE NXT / JAQUAR, Model: FONTE / HINDWARE, Model: CONSTELLATION PREMIUM)
S&F in repair vitreous china floor mounted coupled closet (Pedestal pattern), white, including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC seat cover and connecting fittings complete all as specified and directed. (Make :CERA, Model : CALIBRE / ASIAN PAINTS, Model: PRIMUS / JAQUAR, Model: CONTINENTAL / HINDWARE, Model: ALPHA S 220 / PARRYWARE, Model: INDUS)
S&F in repair vitreous china floor mounted one piece closet (Pedestal pattern), white including vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC soft close seat cover and connecting fittings complete all as specified and directed. (Make : CERA, Model: CHAMP / PARRYWARE, Model: Entice / HINDWARE, Model: FLORA / ASIAN PAINTS, Model: IMMERSE )
S&F in repair vitreous china, wall mounted closet, white incl bracket, trap, PVC soft close seat cover and connecting fittings complete all as specified and directed. (Make : CERA, Model : COMPACT / PARRYWARE, Model: CASCADE NXT / HINDWARE, Model: STUDIO)
S&F in repair flush valve concealed push type (dual flush) 40 mm bore including concealed body and all other fittings complete all as specified and as directed. (Make: CERA, Cat No: F8010202 / HINDWARE, cat No: F860042 / PARRYWARE, Cat No: T3305A1 / PRAYAG, Cat No: BEA-37 / JAQUAR, Cat No: FLV-1089N)
S&F in repair chromium plated tumbler holder with glass tumbler & wall flange complete all as specified and directed. (Make : JAQUAR, Cat No: ACN-1141N / PRAYAG, Cat No: BA-26G /HINDWARE, Cat No: F890007 / CERA, Cat No: F5002107 / PARRRYWARE, Cat No: T6004A1)
S&F in repairs soap dish, chromium plated body complete all as specified and directed. (Make: PRAYAG, Cat No: BA-45 / CERA, Cat No: F5003106 / PARRYWARE, Cat No: T6902A1 / HINDWARE, Cat No: F880011)
S&F in repair 15mm dia soap dish, square, acrylic body with chromium plated base complete all as specified and directed. (Make : Jaquar, Cat No : AKP-35731P / PARRYWARE, Cat No: T6403A1 / PRAYAG, Cat No: BA-35 / CERA, Cat No: F5001106 / HINDWARE, Cat No: F890005)
S&F in repair sheet glass shelf assembly consisting of sheet glass shelf with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. (MAKE: HINDWARE, Cat No: F880010 / JAQUAR, Cat No: ACN-1171N / PARRYWARE, Cat No: T6009A1 / PRAYAG, Cat No: BEA-51 / CERA, Cat No: F5001114)
S&F in repair corner glass shelf 200 mm with brass brackets, as in repair complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-44 / JAQUAR, Cat No: ACN-1173 / PARRYWARE, Cat No: T6010A1 / CERA, Cat No: F5005102)
S&F in repairs vitreous china (coloured) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (coloured) and mild steel chromium plated or aluminium hinging device complete all as specified and directed. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental / CERA, Model: Conventional / HINDWARE, Model: SLICK)
S&F in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and incl with flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART /ESSCO, Cat No: WHE-WHT-183NL)
S&F in repairs Low density polyethylene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end complete all as specified and directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / JEXON)
-ditto- all as per Item No. 92 here in before but 600mm long. (MAKE : PRAYAG, Cat No. 324 / POLYTUF, Cat No. 4004-D / SHAKTI, Cat No: SB 1324-D or equivalent model in JEXON)
S&F in repairs Mono block water pressure pump set of capacity 0.50 HP single phase , discharge range 36-60 Lpm , working in voltage range 220-240 V with operating pressure range 1.4 -2.4 (Bar) complete including with closed discharge valve and connected fittings complete all as specified and as directed . (Make: KILOSKAR - ETERNA, Model: SJPBS 42420-HL or equivalent model in CROMPTON / KSB)
S&F in repairs Chromium Plated 25mm dia brass chromium plated curtain rod with fixing brackets, stops, rollers etc complete all as specified and directed.
S&F in repairs fancy type metal finish curtain bracket fixed to walls complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as specified and directed.
M&L False ceiling with 'E' board "Classic", reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on aluminium powder coated snap grid to support the boards/files with aluminium anodised main 'T' section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides including hanging arrangements with 1.6mm dia GI wire and anodised adjuster complete all as specified and as directed
S&F 10 to 12mm thick gypsum board false ceiling including 0.55mm thick GI perimeter channel, GI channel tray frame work having one flange of 20mm and another flange of 30mm with web of 27mm, GI intermediate channel of size 45mm x 0.90mm thick with two flange of 15mm each suspendded form the soffit of roof slab/truss @ 1220mm c/c with MS angle of suitable size fixed to soffit of ceiling with GI cleat and expansion fastener with and including necessary nuts and bolts and gypsum board is screwed to ceiling section with stainless steel screws @ 230mm c/c complete all as specified and directed.
S&F in repair 100 mm wide decorative corner bead (of approved design), made of plaster of paris, fixed with screws on ceilings, joints finished with plaster of paris for neat and joint free look complete all as specified and directed.
S&F 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
Cutting holes in to brick wall for inserting bold fast & making good dismantled portion in cm (1:3) or PCC (1:2:4) type B1, depth exceeding half brick but not exceeding 1 brick complete all as specified and directed.
M&L for mild steel bands and straps support or stays holdfast and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.
M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, treating ends of posts, back of chowkhats etc, with tar or coal tar black paint, area tarred exc 0.1 sqm but n. exc 0.5 sqm each complete all as specified and directed.
-ditto- as per Item No. 104 above but treating small articles such as holdfasts, ends of posts, back of chowkhats, etc, area n exc 0.1 sqm each
S&F factory made 35 mm thick 2nd class hard wood panelled shutters (any Nos of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers, fitted to chowkhats complete all as specified and directed.
S&F factory made 30 mm thick 2nd class hard wood skeleton shutters open rebated and prepare to receive glass, gauge etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc, size of members of shutters as specified in SSR Part-I, Section 8.24(b) complete all as specified and directed.
S&F factory made 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR PartI, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
M&L 30 mm thick flush shutters solid core construction with black board core and plywood face panels commercial type on both side complete all as specified and as directed.
S&F powder coated (medium thickness of powder coating 50 micron) aluminium frame for door, windows, partitions and ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.
M&L for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges types B-21 100 mm long (2No) suitable handle (1No) complete all as specified. (NOTE: Glass shall be measured & paid separately)
S&F 4.8 mm thick plain sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed.
S&F 4.8mm thick plain sheet glass, ordinary quality, frosted on one side, area in squares exc 0.5 sqm in each pane and glazing in aluminium framework/ snap beading complete all as specified and directed.
-ditto- but 4.8 mm thik sheet glass, frosted on one side
S&F 3 mm thick plain sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed.
S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, anodised aluminum fittings such as suitable 150 mm long peg stays (01 No), hinges type B-21 100 mm long (02 Nos), suitable handle-01No each shutter etc as per manufactures instruction complete all as specified and directed. (NOTE: Quoted rate is deemed to be inclusive of the cost of include for anodised aluminium hard ware as indicated, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames, handle etc as described in item. Sheet glass shall be measured seperately)
S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors shutters, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips rubber neoprene packing, handles 2 Nos in each door, hinges, Mortice lock vertical type size 100 mm 4 levers of brass in each door, anodised aluminium snap beading screws etc as per manufactures instruction complete all as specified. (NOTE: Quoted rate is deemed to be inclusive of the cost of include for anodised aluminium hard ware as indicated, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames, handle, mortise lock etc as described in item. Sheet glass shall be measured seperately)
S & F PVC solid door frame of size 50 x 47 mm made out of 5 mmthick prelaminated single side PVC sheet reinforced with MS square tube complete all as specified and as directed.
S & F 30 mm thick factory made both side prelaminated solid panel PVC door shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 19mm X 19mm for stiles, top and bottom rails, treated with a coat of metal primer, MS frame covered with heat moulded prelaminated PVC 'C' channel for stiles and both side prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; stiles and rails feathered at edges, panelling of both side prelaminated PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in frame complete all as specified and directed.
S&F mortise lock in repairs vertical type 100mm dia size 6 levers complete all as specified and directed.
S&F stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repairs stainless steel wire cloth of 0.36mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
M&L for preparation of new untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F 100mm mild steel butt hinges (medium weight) cold rolled complete all as specified and directed.
S&F 75mm stainless steel butt hinges (medium weight) cold rolled complete all as specified and directed.
S&F 150 mm size aluminium anodised barrel tower bolts of extruded section (ISI marked) complete all as specified and directed.
S&F extruded aluminium alloy handle fabricated type anodised 100 mm size (ISI marked) complete all as specified and directed.
S&F 150mm long aluminium anodised handles (fabricated type) ISI marked complete all as specified and directed.
S&F 200mm long aluminium anodised tower bolts extruded section, ISI marked complete all as specified and directed.
S&F 300mm long aluminium anodised sliding bolt with hasp, staple (bolt type) and fixing clips or sheets cast of extruded section and fixing bolts and sliding bolts of extruded section ISI marked complete all as specified and directed.
S&F 40mm dia cup board knobs, fancy type complete all as specified and directed.
S&F in repair 75mm long mild steel tower bolt complete all as specified and directed.
S & F 2nd class hard wood timber, wrought and fixed as in framed scantling over 40 Sqcm in section complete all as specified and directed.
S&F 2nd class hard wood plain fillets, square or rectangular or triangular in section, wrought , cross sectional area exc 6 Sq cm but n exc 13 Sq cm, secured with nails including two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F 2nd class hard wood plain fillets, square or rectangular or triangular in section, wrought, cross sectional area exc 3 Sq cm but n exc 6 Sq cm, secured with nails including two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F in repair rubber gasket of size 50mm X 6mm suitable for air sealing of aluminium/wooden door, window etc. complete all as specified and directed.
S&F in repair 12mm thick plywood grade BWR type B-B fixed with screws to timber frame works complete all as specified and directed.
S&F in repair 6mm thick plywood grade BWR type B-B fixed with screws to timber frame works complete all as specified and directed.
S&F in repair 19mm thick commercial faced plywood grade BWR type B-B fixed with screws to timber frame work as in pelmet boxes, cup board etc complete all as specified and directed.
M&L in repairs 0.9mm thick decorative laminate type-1 of surface finish colour and pattern as approved fixed with approved adhesive as per manufacturer's instruction complete all as specified and directed.
S&F in repairs brass hat and coat hooks, solid body, 175mm to 250mm complete all as specified and directed.
S&F in repairs 450 mm long brass steel skeleton tower bolts with cast brass plate and staples and rolled or drawn brass bolt complete all as specified and directed.
S&F in repairs 600 mm long brass steel skeleton tower bolts with cast brass plate and staples and rolled or drawn brass bolt complete all as specified and directed.
S & F in repairs 300 mm long brass , sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and directed.
S&F Floor door stopper of brass body and tongue, anodised with hard drawn steel spring (overall length of cover plate 150mm) complete all as specified and directed.
M&L for mild steel framed work such as grills, gate, gratings etc with end of bars shouldered and revets welded etc framed guard bars barrel iron door ladder framed balusters walk ways, railing etc complete all as specified and directed.
M&L mild steel rolled sections as in main and cross beams, angle, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors etc conforming to grade Fe-410-0 or Fe-310-0 made to required shape and size, welded at joints complete all as specified and directed
S&F PVC solid wall lining consisting of 5 mm thick plain colour PVC sheet used inclusive of solvent cement and fixing at site on PVC frame as per manufacturer’s specification and instruction) complete all as specified and directed.
S&F PVC fillets of width 35 mm, made of 5 mm thick PVC sheet, for wall panelling inclusive of fixing as in grid / frame on wall at a distance 0.6m horizontal & vertical for wall lining/ panelling as per specification of manufacturer and as directed by the Engineer-in-Charge.
S&F in repair Shower panel with hand shower, 6 horizontal massage body jets and over head shower incl taking down old one complete all specified and as directed. (Make: Parryware , Model: Splash N / CERA, Model : Costa or equivalent model in HINDWARE)
S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.
All as per Item No. 151 above but 0.50 mm thick coloured plain galvalume sheet as in ridge/valley gutter of roof.
S&F 0.56 mm thick plain aluminium sheeting alloy 31000 H4 as in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) etc complete all as specified and directed. .
S&F in repairs 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap as in roof, wall fixed with L-type or J- type or crancked hook bolts in lieu screw complete all as specified and directed.
S&F non-skid ceramic coloured tiles (square/ rectangular), 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as per approved design, set and jointed in neat cement slurry in floors and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 15mm thick in cement mortar 1:4 complete all as specified and directed.
-ditto- but non-skid tiles in skirting over over and including screed bed 10 mm thick in cement mortar 1:3 complete all as specified and directed.
S&F glazed coloured digital ceramic tiles in vertical surface, as per approved design, size 300 X 450 X 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, laid over and incl 10mm thick screed bed in cement mortar 1:3 complete all as specified and directed.
S&F Vitrified coloured (light shade) Ceramic tiles, 10 mm thick (square/rectangular) polished, as per approved design, area of each tiles not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and incl screed bed 15 mm thick in cement mortar 1:4 complete all as specified and directed.
-ditto- but light shade vitrified tiles in skirting over over and incl screed bed 10 mm thick in cement mortar 1:3 complete all as specified and directed.
S&F Vitrified coloured (dark shade) Ceramic tiles, 10 mm thick (square/rectangular) polished, as per approved design, area of each tiles not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and incl screed bed 15 mm thick in cement mortar 1:4 complete all as specified and directed.
-ditto- but dark shade vitrified tiles in skirting over over and incl screed bed 10 mm thick in cement mortar 1:3 complete all as specified and directed.
M&L for pre-polished Chequered cement concrete tiles (coloured) of size 30cmx30cmx25mm thick , set , jointed and pointed in neat cement slurry in floor and pointed with white/coloured cement &pigment to match the surface laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed .
M&L 18-20mm thick granite slab in window cills, cooking platform etc and like set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match laid over screed bed 20mm thick in cement mortar 1:4 all as specified and as directed.
S&F 18-20 mm thick granite slab as in vertical surfaces, cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing over and including 10mm rendering in cement mortar (1:3) completed all as specified and directed.
S&F machine cut cudappah stone slab 20-25mm thick, laid over 20 mm thick screed base in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified an directed.
S&F in repair 4 lever brass lock, cupboard grade 1, 50mm size complete all as specified and directed.
S&F in repair aluminium 'E' channel for sliding drawer shutter of cup board in two way, 300 mm long complete all as specified and directed.
S&F double action spring hings, brass with phosphor bronze wire spring, bright polished of size 100 mm complete all as specified and directed.
S&F Brass handles, cast type, polished bright, 100 mm complete all as specified and directed.
S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised for 30 mm width of flaps fixed with screws complete all as specified and directed.
M&L for Providing Cement Concrete, Type B-0, 1:2:4 (using 12.50 mm graded Stone aggregate), as in roof padding mixed with water proofing compound and the concrete surfaces is to be finished even and fair (without using extra cement) complete all as directed by Engineer - in - charge . (NOTE: WPC Shall be measured & paid separately)
M&L for brushing neat cement slurry with 2.75 Kg of cement per Sqm on roof complete all as specified and directed.
M & L for cutting Grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 or cement concrete 1:2:4 type-B1 as required complete all as specified and directed.
M&L bituminous gola, with 80/25 bitumen and coarse sand mixture, 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces, all as specified and directed.
M&L 10 mm thick screed bed in cement mortar 1:3 over roof mixed with water proofing compound as per manufacturer's instruction complete all as specified and directed. (NOTE: WPC will be measured and paid separately)
M&L for water proofing treatment on existing cleaned RCC roof with the following specifications and manufacturer's instruction complete all as specified and directed :- (i) Preparing and cleaning of fully dried surfaces as per IS 3067-1966. (ii) Applying bitumen primer conforming to IS:3384-1968 over the cleaned base @ 0.50 litre per sqm. (iii) Providing a layer of 3 mm thick APP modified pre-fabricated five layer, weight not less than 3.6 kg/sqm, black finished reinforced with non-woven polyster matt membrane with butane torch application. Overlap shall be minimum 100 mm on the transverse direction and 75 mm on longitudinal direction. (iv) Applying two coats of bitumen based UV reflective paint with aluminium finish @ 0.10 litre per sqm over APP membrane. (v) Sealing of all angles & abutments upstands with extra care to ensure perfect bondage. Sealing of edges well into grooves & protect the seal with a polysulphide/polyurethane sealant.
Supply only liquid Water Proofing Compound, conforming to IS and as approved, complete all as specified.
Disconnecting exiting water storage Tank of capacity exceeding 250 litres but not exceeding 500 liters for cleaning of water tank, removing of mud, sludge etc and flushing with chlorine water including supply and fixing of any damaged accessories for water Tank and writting MES No, Unit Name (With capital letter, not exceeding 15cm height and not exceeding 10ms each tank ) and re-connecting and refixing all connections complete all as specified and directed.
-ditto- but for PVC tanks of capacity exc 500 litres but not exc 1000 liters
-ditto- but for PVC tanks of capacity exc 1000 litres but not exc 2000 liters
S&F Powder coated anodised aluminium window grills of size 100 X 100mm having section width 6mm and 3mm thick fixed on aluminium section weighing not less than 0.55 Kg/metre including necessary jointing fittings etc all as per manufactures instruction complete all as specified.
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
S&F Vitrified coloured (light shade) Ceramic tiles, 10 mm thick (square/rectangular) polished, as per approved design, each tile of size 1800mm X 900mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and incl screed bed 20 mm thick in cement mortar 1:4 complete all as specified and directed.
-ditto- as per Item no 183 above but in skirting over over and incl screed bed 10 mm thick in cement mortar 1:3 complete all as specified and directed.
S&F non-skid ceramic coloured digital tiles (square/ rectangular), size of tiles 1200mm X 600mm X 10mm thick, as per approved design, set and jointed in neat cement slurry in floors and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 20mm thick in cement mortar 1:4 complete all as specified and directed.
-ditto- as per Item no 185 above but joint of tiles filled with epoxy grouting
-ditto- as per item no 185 above but non-skid tiles in skirting over over and including screed bed 10 mm thick in cement mortar 1:3 complete all as specified and directed.
-ditto- as per Item no 187 above but joint of tiles filled with epoxy grouting
S&F in repair 12mm thick toughened glass, fixed in hinged doors, partitions, automatic doors and similar works including cutting to shape, drilling holes required, alongwith decorative brass handles complete all as specified and as directed by Engineer-in-Charge.
S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed. (NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete)
M&L for applying elastomeric waterproof coating on roof surfaces in three coats (including one primer coat) to achieve an overall thickness 0.40-0.50mm after preparation of surface as per manufacturer instruction complete all as specified and directed. (MAKE: DR FIXIT, ROOFSEAL TOP COAT / BERGER, HOMESHIELD PU ROOF KOAT or equivalent product in other makes specified in tender)
S&F in repair 3 mm thick solid polycarbonate sheet, in roofing/wall cladding, fixed with self tapping screws complete all as specified and directed.
S&F in repair 6 mm thick solid polycarbonate sheet, in roofing/wall cladding, fixed with self tapping screws complete all as specified and directed.
S&F fibre cement waterproof planks of width 150 mm and 8 mm thickness, any size, of approved design, fixed on walls with suitable screws as per manufacturer's instructions complete all as specified and directed. (Make: Visaka Indusrties or similar brand as approved by GE)
S&F in repairs coat hooks, solid body 175mm (six points) to 250mm of aluminium body and fixed complete all as specified and directed.
S&F welded steel wire fabric n. exc 4 Kg/sqm, fixed to steel members complete all as specified and directed.
M&L for heavy duty pre-polished coloured ceramic floor tiles of size 300 x 300 x10mm thick in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed. (MAKE: JOHNSON, Model: Endura or equivalent item in other makes listed in the tender)
dutta and dutta
S.K. TRADERS
MS AP CONSTRUTION AND CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .