SPL REPAIR TO BLDG NO. T-25 OF THE SIKH LI REGT CENTRE AT FATEHGARH CANTT

S&F in 40 mm bore GI tubing light grade with all fitting laid across road, in trenches or across PCC drain, along electric pole or floor / wall for cable protection with suitable size of MS clapms and nut and bolts / washer complete all as specified and directed.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not excedding 1.5 mtr above the starting point complete all as specified and directed.

Taking down cement plaster of any description on brick, stone, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, removal of rubbish and cleaning, etc upto 7.00 mtr height in any position complete all as specified and directed.

M&L for brick work (except brick) with sub class 'B' bricks old size bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) incl demolition of brick work complete all as specified and directed.

M&L for brick work with sub class 'B' bricks old size bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) incl demolition of brick work complete all as specified and directed.

M & L for rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement and applying three coats of white wash complete all as specified and directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick Screed bed in CM 1:6 incl dismantling of tiles and mortar bedding complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering in CM (1:4) incl dismantling of tiles complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for 20-25 mm thick machine cut kota stone as in flooring, steps laid over 20mm thick screed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete all as specified

M & L for 20-25 mm thick machine cut kota stone as in riser of steps, treads / staircase, in full length in single peice without joint, skirting with groove cutting in double line of stair width / skirting over 10mm thick rendering in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade including necessary grinding, rubbing and polishing and complete all as specified and directed.

M&L 20 mm thick Granite work of any type, table rubbed and polished in cooking platforms, slabs and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 20 mm thick screed in CM 1:6 complete all as specified and directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D-2( using 40mm graded stone aggregate) as in sub floors, flooring and mass concrete complete all as specified and directed

M & L chequered cement concrete tiles of size 30 cm x 30 cm x 25 mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade of tiles including 20 mm thick cement screed bed in CM 1:6 etc complete all as specified and as directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.0 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc Including brick work of jambs and Cill in CM 1:4 complete all as specified and directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc Including brick work of jambs and Cill in CM 1:4 complete all as specified and directed.

S&F factory made Steel Window 1.25mm thick Box Type (primer coated) ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:2:4) type B-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Hold Fast, 150mm long of 12mm square bar made to shape – 04 Nos per window (b) Handles of Z Sec 100mm long (c) Stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges – 01 No per leaf (e) MS Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Fabrication & fixing arrangement as per TD no LZ/C-TD/130 Note : Glass, and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed.

S & F sheet glass ordinary quality 3 mm thick and glazing with oil putty or fixed with bead/glazing pins in squares not exc 0.5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.

M & L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed.

Supply & fixing factory made WPC door frame 100% Solid (wood polymer composite) Size 100mm x 65 mm Single Rebated, made from wpc material comparing of virign PVC polymer of K value 58-60 (suspension grade ) calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk) minimum compressive strength of 58 N/mm2, modulus of elasticity 900N / Sqmm and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasteners/hold fast of required dia and length at no extra cost, colour of door frame to match that of shutter all as per specifications drawings complete all as specified and directed.

Supply & fixing factory made WPC door frame 100% Solid (wood polymer composite) Size 125mm x 65 mm double Rebated ,made from wpc material comparing of virign PVC polymer of K value 58-60 (suspension grade ) calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk) minimum compressive strength of 58 N/mm2, modulus of elasticity 900N / Sqmm and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasteners / hold fast of required dia and length at no extra cost, colour of door frame to match that of shutter all as per specifications drawings complete all as specified and directed.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge.

(Note: stainless steel butt hinges shall be paid separately)

S&F stainles steel butt hinges medium weight of size 100mm fixed with stainless steel screws complete all as specified

S&F Aluminium handles, cast type anodised of size 150mm etc complete all as specified and directed.

S&F 250 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed

S&F 300 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed

S & F floor door stopper aluminium alloy body and tongue, anodised, with hard drawn steel spring with rubber etc overall length of cover plate 140mm complete all as specified and as directed.

M & L 10 to 12 mm thick ready mix repair plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) over interior surface of walls and applying two coats of Oil Bound Distemper over 1mm thick wall care putty complete all as specified and directed Note - Coverage for ready mix plaster will be 24-28 kg/sqm)

S & F ball catches with 8 mm dia steel ball magnet catches for cuboard shutter including strking plate as approved etc complete all as specified and as directed

S & F factory made WPC single extruded 100% lead free ROHS certified board of 18mm thick pre laminated shutter for kitchen cabinet, cupboard. The laminated shutter should be one side prelaminated with different design and other side plain white of density not less than 600 kg / cum manufactured by an ISO 9001:2015 certified company. The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.

S & F continous (piano) hinges, mild steel, bright finish or eletro galvanised width of flap (when opened) 40 mm etc complete all as specified and as direced.

S & F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore complete all as specified and as directed

S & F medium grade galvanized steel tubing with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) incl taking down complete all as specified and as directed.

S & F medium grade galvanized steel tubing with all fittings & fixed complete to walls & ceiling or laid in floors 25 mm dia bore pipe (including in short length) incl taking down complete all as specified and as directed.

Removing existing water proofing treatment of any type (incl brick tile, pcc padding, APP membrane, mud phuska, plaster) any thickness, any no of layer and disposing off out side Defence Land complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of roof including cleaning the surface by using wire brush/pressure hose and applying high performance polyurethane liquid membrane roof casting cold in two coats @ 1.5 Kg/Sqm with spray/brush an elogation of 300% to 700% and tensile strength not less than 3 N/Sqm as per ASTM D412 and ASTM D2370, crack bridging ability of 3.5mm as per ASTM C 1305, shore a hardness of not less than 60 as ASTMD 2240. The item includes epoxy prime applied @ 0.15 Kg/Sqm and a geotextile of 40 GSM to be applied over first coat while first coat is still wet complete as per manufacturer's instruction and sound engineering practice complete all as specified and directed. Note - work shall be executed by authorized applicator of manufacture as per manufacturer's instructions and roof height upto double storey building.

Supply only WPC complete all as specified and as directed.

S & F in repair fancy type 125mm size square brass CP shower rose with or without swivel joints complete all as specified and as directed.

S & F in repair bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia pipe complete all as specified and as directed.

S & F in repair fancy type glass corner 300 mm radius of 6 to 8 mm thick toughened glass with CP railing fixed with fancy type screws complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc, Plastic water closet seat white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F factory made WPC single extruded 100% lead free ROHS certified board of 6mm thick pre laminated board for kitchen cabinet, cupboard. The laminated shutter should be one side prelaminated with different design and other side plain white of density not less than 600 kg / cum manufactured by an ISO 9001:2015 certified company. The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.

S & F in repair PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed.

S & F in repair Vitreous China Wash hand basin white flat back of size 550 x 400 mm including brackets, waste coupling 32mm dia and waste pipe complete all as specified and directed.

S & F 500 litre rotational moulded double layer ISI Marked polyethlene water storage tanks (cylindrical vertical with closed threaded top) and hoisted and fixed in position incl 20 mm PTMT valve with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe (min weight 210 gms) incl dismantling of tank complete all as specified in SSR Part I complete all as specified and directed.

Dismantling of cast iron / PVC / AC / SGSW pipes alongwith fittings and accessories upto 110 mm dia jointed in cement mortar and taking out of walls, floors or trenches, if required complete all as specified and directed.

S&F 110mm bore PVC (SWR) P trap,including provision of PVC garting 110mm Size complete all as specified and as directed.

S&F PVC (SWR) bends any radius for 110 mm bore pipe complete all as specified and as directed.

S&F PVC (SWR) bends any radius for 75 mm bore pipe complete all as specified and as directed.

S&F 110mm bore PVC (SWR) junction single (Single T) equal or unequal with acess door opening for cleaning complete all as specified and as directed.

S & F in repair stainless steel sink with drainage board 1.00mm thick for kitchen with plug / waste pipe washers including cantiliver bracket or, connecting unions etc over all size 915 x 460 mm with bowel size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

S&F in repair utencil plate rack 1 mm th of size 90 cm x 60 cm x 25 cm, of pattern as approved by engineer-in-charge, fixed to wall by means of four nos rawal plugs, complete in all respect complete all as specified and as directed.

S&F in repairs sink mixer with swan neck 15mm bore brass chromium plate foam flow for mixing hot and cold water fancy type complete all as specified and directed.

S&F in repairs wall mixer with L-band (provision of overhead shower) 15mm bore brass chromium plate foam flow for mixing hot and cold water fancy type complete all as specified and directed.

Dismantling wrought iron / Mild Steel work of any description not otherwise provided for complete all as specified and directed.

S&F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor 75 mm bore pipe complete all as specified and as directed.

M & L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed.

M & L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall, landing, balconies, canopies, deck slabs and in shelves and like in repair to Chajjas, Claddings, soffits etc including bonding agent, complete all as specified and directed. Note:- Reinforcement to be measured & paid under respective items.

M & L for providing pre cast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab and man hole covers etc set CM (1:6) complete all as specified and directed.

M & L for form work to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete flat, complete all as specified and directed.

M & L mild steel TMT bars 6 to 8mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia all as specified and directed

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 150mm dia pipes complete all as specified and directed.

Taking down copper/aluminium point wiring of any description and any position (light, fan, socket or power point) complete, including fixture and fittings such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified.

Taking down copper / aluminium sub main wiring and making good distrubed surfaces to match with the existing surface roof / wall / floor complete all as specified and directed.

M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture SIKA LATEX POWER or equivalent make mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack complete all as specified and as directed.

All as per item 102 above but for one light point controlled by 2 way switches with cable 1.5 sqmm size complete all as specified and directed.

All as per item 102 above but for one 6 Amp socket point on an independent board with 1.5 sqmm (FRLSH) copper conductor cable complete all as specified and directed.

All as per item 102 above but for one 6 Amp socket point on same board complete all as specified and directed.

All as per item 102 above but for one 16 Amp socket point on independent with 4.0 sqmm FRLSH unsheathed copper conductor single core multistranded complete all as specified and directed.

S&F Modular switch 1 way 6A,1 Module complete all as specified and directed.

S&F Modular switch 2 way 6A,1 Module complete all as specified and directed.

S&F modular Socket, 6A - 3 pin combined 2 Module complete all as specified and directed.

S&F modular switch 1 way 16A, 1 module complete all as specified and directed.

S&F socket modular 16A - 3 pin combined 2 module complete all as specified and directed.

S&F White cover plate (inner & outer) with frame, 1 module complete all as specified and directed.

S&F White cover plate (inner & outer) with frame, 3 module complete all as specified and directed.

S&F White cover plate (inner & outer) with frame, 8 module complete all as specified and directed.

S&F Metal flush box 1/2 module complete all as specified and directed.

M&L for sub main wiring with two single core 6 Sqmm (FRLS) copper conductor PVC insulated and unsheathed cable including PVC conduit medium grade (appropriate size) concealed in wall for sub main connection including 6 Sqmm (FRLS) insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly complete all as specified and directed. (Note :- Two runs of 6 sqmm FRLS and one run of 6 sqmm (FRLS) earth copper conductor shall be measured as one unit length.)

S&F Metal flush box 3 module complete all as specified and directed.

S&F Modular electronic Fan step regulator, 120W - 2 module complete all as specified and directed

S&F ceiling rose PVC/Poly carbonate isolated body three terminal AC 230 volts complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture or equivalent make @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat complete all as specified and as directed.

S&F in replacement of VTPN DB suitable for Mounting MCCB as Incomer of rating 100 Amp vertical distribution board 12 way with suitable rated bus bar having IP-43 protection and double metal door concealed in wall including fixing MCCB & MCB connection with aluminium thimbles as required complete all as specified and directed.

S&F in replacement of MCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection as required complete all as specified and directed.

Supply and fixing LED decorative wall light fixtures made up of polycarbonate, suitable for 09 W TU retrofit CFL (B-22 base) including LED bulb 09 watt of colour temp 3000 K & luminaire lumen > 1000 lm complete all as specified and directed.

S&F of MCCB 100 Amp, 16KA, 4 Pole including complete electrical connection by appropriate size of aluminium lugs complete all as specified and directed

S&F in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and diected.

S&F of MCB SP 10 to 32 Amp 240 Volt 'C' curve 10 KA complete all as specified and directed.

Supply and fixing LED lights fitting 4 Ft, 20W, 220V, AC, batten type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F of MCB SPN 32 Amp 240 volt 'C' curve 10 KA complete all as specifed and directed.

S & F building security LED Light 30 Watt made up pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC having top opening separate driver compartment with IP-65 protection and impact resistance of IK 07 for building secuity purpose with bracket size made of GI pipe medicum grade 25 mm dia 1.5 mtr long bend to shape as required and fixing with two nos MS Clamp of size 25x6 mm for fixing of builiding security light fittings completed all as specified and directed.

S&F of exhaust fan, made of sturdy Engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz RPM 1200, copper winding of sweep 250 mm including complete fitting into the wall complete all as specified and directed.

Material and labour for concealed Point wiring for one light point/fan point /bell point controlled by one switch (using red, black and green etc colour wires as colour coding) complete with 1.5 Sqmm (nominal cross section area) single core FRLS PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through and including PVC conduit 20mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes etc. including provn of 1.5 Sqmm single core FRLS PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed. Note- Switch, socket, Regulator etc will paid separately.

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip armoured service cable pole to building electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 Core complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtrs wide and not exceeding 1.5 mtr

s in depth for laying of cables including getting out in any type of soil complete all as specified and directed.

Returning filling in incluidng spreading, levelling and well ramming in layers not exceeding 25 cm each layers of any type of soil complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly into ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to GI earth wire of size 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electricl plate No.3 connected to earthing test point all as specified or indicated including excavation and connected earth work, PCC chamber and cover, watering pipe, funnel wire mesh but without earth lead protection pipe and test on completion after dismantling unserviceable earthing (above GL only) complete all as directed including dismantling of existing earthing. Note:- On testing after completion if desired earth resistence is not obtained the earthing will be redone at no extra cost.