WELCOME MAINTENANCE OF OFFICER S ACCN THROUGH DAY TO DAY AND COMPREHENSIVE MAINTENANCE OF BUILDING AT SUNJUWAN UNDER GE JAMMU

Amount

B/R portion: - Providing labour only for B/R nature work for day to day maintenance and petty repair required for upkeeping of certain pocket of Married / OTM Accn buildings under AOR of AGE B/R Sunjuwan for 08 (eight) working hours (0900 to 1700 Hours) per day. Contractor / his representative reporting to JE (Civil) incharge at 0900 hours in B/R service station, after attending the complaint at 17.00 hours daily including provision of uniform along with all necessary tools, to the persons providing services complete all as per requirement enumerated in Particular Specifictions, No extra cost shall be provided for the following tradesmen: - (a) Plumber with helper (b) Carpenter with helper Complaint slip book and register in standard format as per sample kept in AGE B/R Office will be provided by the contractor for recording day to day complaints during currency of contract period. Cost of required complaint slip book, documents, stationary, etc is included in this item. No complaint will be kept pending more than 24 Hours.

Supply and fixing in repairs spindle brass for 15 mm dia chromium plated bib cock / pillar cock / concealed cock / mixer valve of any pattern complete all as specified and as directed.

Supply and fixing in repairs bib tap standard of PTMT 15 mm dia any colour high pressure screwed for iron pipe including socket and nipple 75mm long (minimum weight 90 grams) complete all as specified and as directed.

Supply and fixing in repair bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fixing in repairs 15 mm dia angle cock / angle valve chromium plated with capstan head screwed down high pressure screwed both ends complete all as specified and as directed.

Supply and fixing in repairs brass chromium plated mixer for mixing hot and cold water screwed down for 15mm for iron pipe sample kept at GE Jammu complete all as specified and as directed.

Supply and fixing in repairs 15 mm bore pillar cock chromium plated brass with capstan head screwed down high pressure complete all as specified and as directed.

Supply and fixing in repair brass chromium plated shower rose 125mm size with or without swivel joints including fixing to steel pipe of 15mm bore complete all as specified and directed.

Supply and fixing in repair waste fittings 32 mm brass chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

Supply and fixing in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

Supply and fixing in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

Supply and fixing in repair vitreous china wash down water closet pan (pedestal pattern), white including plastic water closet seat, closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fixing in repair vitreous china wash hand basin, white, flat back, size 550 x 400mm including waste coupling and waste pipe to floor trap and fixed complete all as specified and as directed.

Supply and fixing in repair looking mirror of size 600mm x 450mm with PVC frame all around complete all as specified and directed.

Supply and fixing in repair PVC low level flushing cistern, 10 litre capacity, symphonic action type, white inlet valve, float, handle, 15mm PVC connection 450mm long and 32mm dia PVC flushing pipe including fixing of long screws chromium plated complete all as specified and as directed.

Supply and fixing in repair plastic water closet seat cover, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and fixed complete all as specified and as directed.

Supply and fixing in repair flexible / solid PVC waste pipe 32 to 40 mm for wash hand basin / sink upto floor trap and fixed complete all as specified and as directed.

Supply and fixing in repair stainless steel curtain rod fancy type 20 mm bore with fixing brackets, stops, rollers, side knob, corner knob etc complete all as specified and as directed. Note: - Two no's of knobs required for each opening of door / window.

Supply and fixing in repair tubular towel rail 24" long, 20 mm dia, Brass chromium plated complete all as specified and as directed.

Supply and fixing in repair jet spray with 1.00 metre tube complete all as specified and as directed.

Supply and fixing in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with rails / wooden beading / steel staple complete all as specified and as directed.

Supply and fixing in repair 140mm dia floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden / steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fixing in repair 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square of any size pane and fixed complete all as specified and as directed.

Supply and fixing in repair 3mm thick figured glass, pin head type and glazing with oil putty in square of any size of pane complete all as specified and as directed.

Supply and fixing 4 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Material and labour for securing glass of any description in existing wooden frames glazed with putty / beads including removing loose or decayed putty / beads, painting / oiling one coat on rebates, grooves, reputtying and painting / oiling puttied surface to match existing work complete all as specified and as directed. Note: - New length of frame reputtied shall be measured.

Supply and fixing in repairs 18 / 19mm thick particle board interior grade prelaminated on one side and other side balancing white lamination in any position such as cup boards, drawers shutters, shelves etc. fixed with screws to timber frame work complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections at any places complete all as specified and as directed.

Supply and fixing for 15 mm bore CPVC water tubing, with all fittings and fixed to walls, roofs and ceiling or laid in floors complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections at any places complete all as specified and as directed.

Supply and fixing for 20 mm bore CPVC water tubing, with all fittings and fixed to walls, roofs and ceiling or laid in floors complete all as specified and as directed.

Fixing only old steel tubing and connections in new or old position for 20 mm bore pipe (walls, ceiling, floors, etc.) complete all as specified and as directed.

Supply and fixing in repairs PTMT ball valves 20 mm bore, high pressure with epoxy coated aluminium rod and high density plastic ball with sockets, screwed and fixed complete all as specified and as directed.

Supply and fixing in repair PVC syphon assembly / internal fittings (as per sample) for 10 litre capacity PVC low level flushing cistern complete all as specified and as directed.

Cleaning and removing all scale and dirt etc. from overhead water tanks and from mouths of circulating pipes of capacity exceeding 250 litre but not exceeding 500 litre complete all as specified and as directed.

Cleaning and removing all scale and dirt etc. from overhead water tanks and from mouths of circulating pipes of capacity exceeding 500 litre but not exceeding 1000 litre complete all as specified and as directed.

Dismantling PVC water tanks of capacity upto 1000 litres and removing from site complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs rotational moulded polyethylene water storage tanks 500 litre capacity (cylindrical vertical top) hoisted including ball valve 20 mm dia high pressure of PTMT epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in position complete all as specified and as directed.

Supply and fixing in repairs rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted, including ball valve 20 mm dia high pressure of PTMT epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in position complete all as specified and as directed.

Supply and fixing in repairs PTMT grating 125mm to 150 mm dia with or without waste hole complete all as specified and as directed.

Supply and fixing in repair kitchen plate rack of stainless steel of size 720 x 600 x 230mm made out of 1mm thick stainless steel sheet complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt) and removing from site complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and not exceeding 4 Sqm each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt) and removing from site complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete and removing from site complete all as specified and directed by Engineer-in-Charge.

Taking down shutters and refixing in same opening after resecuring or easing and adjusting, also refixing builder's hardware as required including renewal of unserviceable screws etc of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and directed by Engineer-in-Charge.

Material and labour for factory made pressed steel frames of size 105 x 60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate etc. complete including bottom of each chowkhat to be welded with 02 no's 25x25x3mm angle iron projecting 10cm one either side including one shop coat of red oxide chrome primer and including PCC (1:3:6) type C-0 in back filling of chowkhats and tarring back of chowkhats and holdfasts complete all as specified and as directed.

Material and labour for factory made pressed steel frames of size 125 x 60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate etc. complete including bottom of each chowkhat to be welded with 02 no's 25x25x3mm angle iron projecting 10cm one either side including one shop coat of red oxide chrome primer and including PCC (1:3:6) type C-0 in back filling of chowkhats and tarring back of chowkhats and holdfasts complete all as specified and as directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain PVC sheet and edges will be painted to match with printed sheet, reinforced with mild steel square tube, supplying and fixing in opening as per specification complete all as specified and as directed.

Supply and fixing 30 mm thick PVC factory made panel door shutter (style) consisting of frame made out of mild steel tubes for top and bottom rail, Mild steel frame shall be covered with heat moulded plain sheet PVC channel and 5 mm thick X 15 mm wide PVC sheet beading used inside style and rails and decorative PVC beading of 10x10 mm used instead of exposed portion of PVC sheet beading as in toilet / kitchen cabinet shutters complete all as specified and as directed.

Supply and fixing 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, both faces are covered with decorative face veener with lipping / frame to match complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 35mm thick factory made Ist class hard wood, glazed and skelton shutter open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR 2020 Part-I section 8.24 (b) supplied and fitted to chowkhats complete all as specified and as directed.

Supply and fixing in repair mild steel butt hinges medium weight 100 mm long complete all as specified and as directed.

Supply and fixing in repair continuous piano hinges, mild steel, bright finish or electrogalvanised, width of flap 30mm (when open) fixed with welding complete all as specified and as directed.

Supply and fixing in repair mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

Supply and fixing in repair 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fixing in repair 150mm long aluminium handle extruded alloy, fabricated type anodised complete all as specified and as directed.

Supply and fixing in repair 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint on wooden surface over one coat of pink primer including prepartion of new surface over 10cm width or girth complete all as specified and as directed.

Supply and fixing Knob for cup board and in kitchen cabinet of any size complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs mild steel peg set powder coated 450mm long and 50mm wide with five hooks complete all as specified and as directed.

Supply and fixing in repairs toilet paper holder chromium plated with top flap fixed with screws etc complete all as specified and as directed.

Supply and fixing in repair stainless steel sink with drainage board, made of 1.00mm thick sheet for kitchen or laboratory with plug, washers, waste pipe including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets, connecting union to pipe, overall size 915mm x 460mm, bowl size (410 x 330 x 160mm) complete all as specified and as directed.

Supply and fixing in repair PVC waste coupling 100 mm dia of half or full threaded complete all as specified and as directed.

Material and Labour for preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efflorscent salts and trading oil and greasy spots by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirts etc and applying one coat of cement based paint on old prepared surfaces of walls complete all as specified and as directed.

Material and Labour for preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efflorscent salts and trading oil and greasy spots by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirts etc and applying two coats of oil bound distemper on old prepared surfaces of walls complete all as specified and as directed.

Material and Labour for preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efflorscent salts and trading oil and greasy spots by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirts etc and applying one coat of Oil bound distemper on old prepared surfaces of walls complete all as specified and as directed.

Material and labour for preparation of old wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and as directed.

Material and labour for preparation of old steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and as directed.

Material and labour for applying one coat of 1.00mm thick wall care putty on wall and finished smooth the surfaces complete all as specified and as directed.

Dismantling floors, hearth or wall tiling including cement mortar bedding (but not backing), removing unserviceable material outside MOD area and rubbish off the premises complete all as specified and as directed.

Supply and fixing vitrified coloured ceramic tiles 10mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in cement mortar (1:6) complete all as specified and as directed.

Supply and fixing vitrified coloured ceramic tiles 10mm thick (square / rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in dado / skirting / vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

Supply and fixing coloured non-skid ceramic tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in cement mortar (1:6) complete all as specified and as directed.

Supply and fixing coloured glazed ceramic tiles in vertical surface 300 x 450 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar (1:3) complete all as specified and as directed.

Material and labour for granite (of any type) of 20 mm thick machine cut, on cooking platform, staircase etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over 15mm thick screed in cement mortar (1:4) complete all as specified and as directed.

Demolition of cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and removing unserviceable material outside cantt area complete all as specified and as directed.

Material and labour for cement concrete (1:5:10) (using 40 mm size coarse aggregate) as in mass concrete and mass filling in sunken floor of toilets complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement sand mortar (1:4) mixed with and including liquid integral water proofing compound, 0.20 litre per 50 kg bag of cement both on floor and wall after proper curing and drying and apply epoxy resins coating polymer modified cementation coating like brush bond as per manufacturer's instructions both on floor as well as on walls of sunken floors including 75 mm thick PCC (1:2:4) type B-2 flooring complete all as specified and directed by Engineer-in-Charge. Note: - Only floor area shall be measured.

Dismantling CI / PVC pipe 75 / 100mm bore complete all as specified and as directed by Engineer-in-Charge.

Material and labour of cast iron sand cast pipe 75 mm bore fixed to wall / laid in trenches etc jointed with cement joints complete all as specified and directed by Engineer-in-Charge.

Material and labour of cast iron sand cast pipe 100 mm bore fixed to wall / laid in trenches etc jointed with cement joints complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 75mm dia cast iron floor trap, with grating including jointing with solvent cement complete all as specified and as directed.

Material and labour in repair PVC (SWR) floor trap 63mm dia for wash hand basin, including 40mm dia HDPE pipe upto the trap of bathroom and jointing with solvent with outlet pipes, stainless steel grating etc complete all as specified and as directed.

Supply and fixing in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

Taking down cement plaster from concrete / stone surfaces including racking out joints, hacking for key, scrubbing down with water etc and its removal from site complete all as specified and as directed. Note: - Plaster work may be in patches upto triple storey buildings.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick surface finished even and smooth without using extra cement upto height of four storey building complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick surface finished even and smooth without using extra cement etc complete all as specified and directed. (including all necessary scaffolding, lifting arrangement for external surfaces).

Material and labour for rendering 5 mm thick in cement mortar (1:3) on fair faces of brick surface or concrete surfaces of ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparing plastered or unplastered new surface and applying three coats of white wash on ceiling complete all as specified and as directed.

Material and labour for applying two coats of cement based paint including preparation of new plastered surface complete all as specified and as directed.

Material and labour for preparing plastered or unplastered new surfaces of walls and applying two coats of oil bound distemper complete all as specified and as directed.

Material and labour for preparation of new plastered surface of external walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efflorescent salts and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc, applying one coat of wheather proof paint exterior grade over one coat of primer after making surface even and smooth, including any colour for chajjas and fascias directed by Engineer-in-Charge, including all scaffolding arrangement upto three storeyed building complete all as specified and directed.

Supply and fixing in repair box type steel windows / Ventilator (factory made) outer frame made out ERW tube 'P' section 65X45X25 mm and shutter of ERW tube 'P' section 50mmX35mmX20mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler / AC window complete all as specified and shown on drawings No CEPZTD-324/07 Sh 1/3 to 3/3 complete all as specified and as directed. Note: - The quoted rates shall also include: - (i) One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrete surface. (ii) 4 no's MS steel lugs made of 20X5 mm Iron flat 200 mm long. (iii)10 mm Sq Bar grill / guard bar design as per drawing. (iv) PCC block for embedding lugs.

Material and labour for provision of roof treatment with polymeric water proofing membrane all as given below: - (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Material and labour for plastering 10mm thick in cement mortar (1:3) using 100% coarse sand on roof surface including water proofing compound as per manufacturer's instructions and as directed by Engineer-in-Charge. (c) Applying a coat of bituminuous primer conforming to IS : 3384-1986 @ 0.25 Iitres/sqm on prepared surface and allowed to dry. (d) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with overlaps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar (1:3). (e) Material and labour for two coats of aluminium paint on membrane surface all as specified and directed.

Material and labour for provision of roof treatment with polymeric water proofing membrane all as given below: - (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Material and labour for plastering 10mm thick in cement mortar (1:3) using 100% coarse sand on roof surface including water proofing compound as per manufacturer's instructions and as directed by Engineer-in-Charge. (c) Applying a coat of bituminuous primer conforming to IS : 3384-1986 @ 0.25 Iitres/sqm on prepared surface and allowed to dry. (d) Applying and laying 3mm thick APP membrane having non woven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with overlaps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar (1:3). (e) Material and labour for cement concrete tiles 25 cm x 25 cm x 20-22mm thick, machine pressed, set, jointed and pointed in neat cement slurry as in floors/terraces over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

Supply and fixing galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with nails / wooden beading / steel staple complete all as specified and as directed.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

E/M Portion: - Taking down old unserviceable copper / aluminium point wiring concealed / batten (light, fan, socket or power) complete including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type of switch board wooden / iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

Material and labour in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sqmm for phase and neutral and one run of 6.0 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length including taking down old wiring complete all as specified and as directed. Note: - Wiring shall be done in proper colour coding.

Material and labour for point wiring one light point or one fan point controlled by one switch complete with 1.50 Sqmm copper conductor multistranded PVC insulated FRLS and unsheathed cable in existing PVC rigid concealed conduit with new cast iron / pressed steel sunk terminal box covered with 3 mm thick laminated sheet hylam brand IS-2036 marked with continuous PVC insulated multistranded copper wire 1.50 Sqmm dia FRLS PVC insulated complete all as specified and as directed.

Description all as per Ser item No 101.00 here-in-before but for multi 5 pin 5 amp socket outlet on same board complete all as specified and as directed.

Description all as per Ser item No 101.00 here-in-before but for multi 3 pin socket outlet 5 amp socket on independent board complete all as specified and as directed.

Description all as per Ser item No 101.00 here-in-before but for One bell / buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5 Sqmm size complete all as specified and as directed.

Description all as per Ser item No 101.00 here-in-before but for multi 3 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 Sqmm copper conductor multistranded cable PVC insulated FRLS and unsheathed cable in and including PVC rigid concealed conduit 20/25 mm dia and unsheathed copper conductor multistranded cable 2.5 Sqmm as earth wire FRLS PVC insulated in green color all as specified and as directed by Engineer-in-Charge complete with new CI / pressed steel sunken black with hylum top sheet cover.

Supply and fixing in replacement socket outlet 5 Pin, 5 A, flush type complete all as specified and as directed.

Supply and fixing in replacement for switch piano, flush type single pole one way 5 Amp, 240 volts complete all as specified and as directed.

Supply and fixing in replacement for bell push, flush type single pole, 5 Amp, 240 volts complete all as specified and as directed.

Supply and fixing in replacement ceiling rose, 3 phase / PVC / polycarbonate isolated body complete all as specified and as directed.

Material and labour in replacement switch piano flush button single pole one way 15 Amp complete all as specified and as directed.

Material and labour in replacement socket outlet 3, 5 pin and 15 Amp multipurpose shuttered type complete all as specified and as directed.

Supply and fixing in replacement calling bell Ding Dong / buzzer AC 230 Volts, single pole complete all as specified and as directed.

Material and labour for fan regulator stepped electronic type suitable for AC, 240 V complete all as specified and as directed.

Material and labour in replacement for Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

Material and labour in replacement self ballast LED retrofit lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and as directed.

Supply and fixing in replacement LED lights fitting 1 x 20W, 220V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.95, 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete (4' ft long) with LED rod 20 watt, 230 Volts 50 Hz complete all as specified and as directed.

Supply and fixing in replacement LED light fitting 1 x 9W / 1 x 10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing in replacement SPN 40 to 63 Amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp, in the MCB DB complete with connection, testing and commissioning complete all as specified and as directed.

Material and labour for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

M/S Sukhmani Construction Co.

M/S TRIKUTA BUILDERS

M/S VED PAUL MAHAJAN

Bidder Name

M/S VED PAUL MAHAJAN

M/S TRIKUTA BUILDERS

M/S RAVINDER SINGH

M/S Sukhmani Construction Co.