Replacement of the existing damaged vinyl sheeted false access flooring and for providing PVC wall panelling and other repairs at the System Control Centre in Main Office campus, Electricity Department, Puducherry.

Amount

Dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc complete .

Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface - water thinnable cement primer.

Wall painting with plastic emulsion paint - Premium of approved brand and manufacture to give an even shade - two or more coats on new work

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead - of area 3 sqm and below

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50m in height dimension comprising of uPVC multi - chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded inter locks, EPDM gasket, wool pile , zinc alloy (white powder coated) touch locks with hook , zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I. fastners 100 x8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shyall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality , all complete as per approved drawing. (Single / double glass panes , wire mesh and silicon sealent shall be paid separately) - Two track two panels sliding window made of (bigl series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 + or - 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of window upto 1.75 sqm upto 2.50 sqm) - sliding window size 1.50x1.35 m

Providing and fixing factory made uPVC white colour casement / casement cum fixed glazed door comprising of uPVC multi-chambered frame ,sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size accoring to uPVC profile), uPVC extruded glazing beads of appropriate dimension , EPDM gasket , zinc alloy (white powder coated ) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear , cylinder with keeps and one side key, G.I.fastners 100 x8 mm size for fixing frame to finished wall and necessary stainless steel screws , etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners , mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality , all complete as per approved drawing. (Single / double glass panes and silicon sealent shall be paid separately) - casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 + or - 0.2mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.00 sqm) - casement door size 0.9 x 2.10

Providing and fixing PVC false roofing with the existing PVC cabin using sintex PVC section of size 6mm x 250 mm , having interlocking facilities supported in the PVC extruted multi chamber frame section of 40 x 48 mm , with necessary MS / Stailess screws. The rate includes the cost of sintex PVC section , labour charges for fixing and transport etc.complete

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions , i.e at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling , C.P.brass / stainless steel screws , all complete as per architectural drawings (Glazing, paneling and dash fasteners to be paid for separately) - for fixed portion - Powder coated aluminium (minimum thickness of powder coating 50 micron)

Applying priming coat - with ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood

Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI , IS :3564 , embossed on the body , door weight upto 35 kg and door width upto 700 mm ), with necessary accessories and screws etc., complete

Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 3.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:6 ( 1 cement : 6 coarse sand)

15mm cement plaster on the rough side of single or half brick wall of mix - 1:4 (1cement : 4 fine sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Providing and fixing removable raised / false access flooring with system and its componenets of approved make for different plenum height with possible height adjusment upto 50 mm , comprising of modular load bearing floor panels supported on G.I. rectangular stringer frame work and G.I.pedestal etc.all complete , as per the architectural drawings , as specified a) Providing at required spacing to form modular frame work , pedestals made out of GI tube of thickness minimum 2 mm and 25mm outer diametre ,fully welded on to the G.I. base plat of size 100mm x 100mm x3mm at the bottom of the pedestal tube ,G.I.pedestal head of size 75mm x 75mm x3.5mm welded with G.I. fully threaded stud 16mm outer diameter with two G.I check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level . The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug. B) Stringers system in all steel construction hot dipped galvanized of rectangular size 570 x 20 x 30 x 0.80 mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel , this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc.,

all complete as per the architectural drawings, as specified c) Providing and fixing access floor panel of 600 x600x32 mm medium grade filled steel anti static high pressure lamination of 800H grade (FS800H) .Access floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones . The top and bottom plates of steel gauges : top 0.6mm and bottom 0.7mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange) . The panel should be corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with pyrogrip noncombustible portland cementitious core mixed with light weight foaming compound.The access floor shall be factory finished with Anti-static high pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and surface flatness within 0.75mm .The panel is to withstand a concentrated load of 363 kgs applied on area 25mm x25mm without collapse in the centre of the panel which is placed on four steel blocks . The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250kg/sqm and an impact load of 50kg all complete as per the approved manufactures specification. All specification must be printed on the side of the panel to ensure the quality of the product - 300mm Finished Floor Height (FFH)

Providing and fixing vertical blinds of 100mm and louvers made up of non woven fabrics of approved make and quality of required depth and length. The rate includes the cost of 45x32x1.3mm powder coated head rail and control unit, aluminium tilt rod, moulded plastic runner, moulded design spacers, polyster fibres transverse card, 2mm polyster card having 45mm ABS plastic heads, tilter chain, cord weight, bottom weight and transporting the materials to the work site and labour for fixing etc., complete as directed by the Engineer-in-charge.

Providing and fixing sun control film of approved brand and quality. The rate to include the cost of adhesive compound, labour for fixing and transportation etc., complete all as directed by the Engineer-in-charge.

Providing and fixing special type ornamental carved and designed dimensions corner type First class teak wood show beading (PIANO DESIGN) to doors and window frames partitions and wooden false ceiling with iron screws, plug including polishing the beading with melamine polish of two coats with a base coat of melamine fillets. The rate shall include the cost of teak wood beading, all materials labour charges, transportation etc., complete size 70mmx35mm.

Providing and fixing ornamental carved designed type teak wood show beading (PIAS CHECK) to door and window frames in partitions false ceiling with iron screws, plug including of two coats polishing with melamine polish with base coat of melamine fillets. The rate shall include the cost of teak wood beading, all other materials labour charges, transport etc., complete size 70 x 10mm