WELCOME MAINT, CLEANING/REPAIR OF SEWAGE LINE, MANHOLE, SEPTIC TANK, SOAKAGE WELL, INTERNAL WIRING, SOCKETS, SWITCHES ETC AND OTHER CONNECTED WORKS AT AF STN CHANDINAGAR UNDER AOR OF GE (AF) FARIDABAD

Amount

Taking down cement plaster on brick or stone walls including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

Demolition of brick work built in cement mortar in any position including all quoins, arches & pillars etc, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) on concrete/brick surfaces finished even and smooth without extra cement mixed with WPC @ 3% by weight of Cement Note:- WPC shall be measured and paid separately.

Supply only integral water proofing compound, complete all as specified and directed.

Dewatering and removal of sludge from the septic tank/soakge well/soackage sump by mechanically (sewage tanker suction pipe) whereever required and dispose off the same in closed container out of MoD land, complete all as specified and directed.

Excavation in trenches, n.exc 1.5m wide & n.exc 1.5m in depth; for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc. n exc10 sq m on plan & n exc 1.5 m in depth & getting out in any type of soil, complete all as specified and directed.

All as per item No 07 above but exc 1.50 m and n.exc 3.00 m.

Removing excavated material (Soil) exc 250 m but n.exc 500 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering & well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 (40mm graded stone aggregate ) for sub base, complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4) type B1 using 20 mm graded stone aggregate finish even and smooth with using extra cement as in flooring complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specificially provided for, complete all as specified and directed.

Demolition and breaking up drain pipes , 150 mm dia (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for Concrete bed to 150 mm dia drain pipes including packing under & haunching against the sides of pipes after they are laid & tested, in cement concrete (1:3:6) type C-2, using 40 mm graded crushed stone aggregate complete all as specified and directed.

M&L for 150 mm internal dia salt glazed stone ware pipe Grade 'A' laid in trenches and jointed all as specified. Note : (i) Excavation and earth work and concrete for bed and haunching of pipe shall be measured and paid separately.

M&L for plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete, complete all as specified and directed.

Demolition and breaking up drain pipes , 200 mm dia (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for Concrete bed to 200 mm dia drain pipes including packing under & haunching against the sides of pipes after they are laid & tested; in cement concrete (1:3:6) type C-2 using 40 mm graded crushed stone aggregate, complete all as specified and directed.

M&L for 200 mm internal dia salt glazed stone ware pipe Grade 'A' laid in trenches and jointed all as specified. Note : (i) Excavation and earth work and concrete for bed and haunching of pipe shall be measured and paid separately.

Demolition and breaking up drain pipes , 300 mm dia (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L 300mm internal dia reinforced concerete pipes, class NP2, laid and jointed complete with collars and jointed complete all as specified and as directed. Note : (i) Excavation and earth work and concrete for bed and haunching of pipe shall be measured and paid separately.

M&L for Concrete bed to 300 mm dia drain pipes including packing under & haunching against the sides of pipes after they are laid & tested; in cement concrete (1:3:6) type C-2 using 40 mm graded crushed stone aggregate, complete all as specified and directed.

M&L plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping/Benching including necessary formwork and finishing of exposed surface, complete all as specified and directed.

Demolition of reinforced cement concrete of any descrption and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for Providing precast, cement concrete, factory made polycrete(SRFC), medium duty (1:2:4 type B-1 with using 20mm graded stone aggregate) as in manholes/drain covers 100/150 mm thick set in cement mortar (1:4), complete all as specified and directed.

M & L for mild steel TMT bars 6 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

S&F for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F in repair Cast Iron, 100 mm dia, 'S' trap, complete all as specified and directed.

M&L for cutting to existing manholes for connecting new/old drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (Using 20mm graded stone aggregate) smooth finished, and reforming benching as required for 150mm dia pipe complete all as specified and directed.

Demolition and breaking up 100/110mm bore drain pipes (salt glazed ware,PVC, AC or reinforced pipes) set in cement mortar complete all as specified and as directed.

Supply and fixing for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints, laid in trenches or in floors/wall complete all as specified and as directed.

Dismantling of 100/75 mm bore cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, complete all as specified and directed.

Supply and fixing for 100 mm bore sand Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to walls/trench complete all as specified and as directed.

Supply and fixing for 75mm bore sand Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to walls complete all as specified and as directed.

Cleaning of existing drain pipes, 150mm internal dia, at any depth by roding manually as required at site from manhole and well flushing after cleaning including getting out sludge if any and liquid materials from connecting manholes, deposited in lines, removing solids and sludge to any distance place outside defence land at own cost and cost of removal shall be included in this rate all as specified & directed by Engr-in-Charge.

All as per item No 39 above but 200mm dia.

M&L for coloured Chequered cement concrete tiles of size 300x300x25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors over and including screed bed 20 mm thick in cement mortar (1:6), complete all as specified and directed.

M&L for preparation of old treated plastered surfaces of wall by brooming down or steel wire brushing, scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt and all loose scales of existing treatment and applying one coat of white wash on wall complete all as specified and directed.

All as per item No 42 above but on ceiling

Taking down chowkats with shutter (without taking off shutter from the frame) n.exc 1.5 sqm each and removing from site complete all as specified and directed.

Supply and fixing in opening complete solid PVC door frame of size 50mm x 47mm made out of 5mm one side prelaminated any colour PVC sheet reinforced with MS square tube, complete all as specified and directed.

Supply and fixing for factory made solid panel PVC door shutter 30mm thick(Style) consisting of frame made out of M.S. tube for top & bottom rails. M.S frame shall be covered with heat moulded prelaminated decorative any colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside wqith solvent cement for stiles and prelaminated colour PVC sheet for top rail, Lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of both side prelaminated decorative colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement fixing in frame at site complete all as specified and directed.

S&F 75mm long, aluminium alloy anodised, butt hinges and fixed, complete all as specified and directed.

S&F 125 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 100mm aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

M&L for preparation of old treated plastered surfaces of wall by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt and all loose scales of existing treatment and applying one coat of oil bound distemper on wall complete all as specified and directed.

All as per item No 50 above but two coats of oil bound distemper on wall.

M&L for preparation of old treated plastered surfaces of ceiling by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt and all loose scales of existing treatment and applying one coat of oil bound distemper on ceiling complete all as specified and directed.

M&L for Complete removal of existing treatment from walls, fins, chajja etc shall include brooming down or steel wire brushing, scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots and removing debris/ malba to low lying area out side of MOD land and applying 3 mm thick a layer of wall care putty on scrapped/uneven surfaces to match with the existing surfaces before application of primer/distemper and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of old treated plastered surfaces of wall by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt and all loose scales of existing treatment and applying one coat of cement base paint on wall complete all as specified and directed.

All as per item No 54 above but two coats of cement based paint on wall complete all as specified and directed.

M&L for preparation of old wooden surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for preparation of old painted steel surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces of walls, facia etc to be finished even and smooth (without using extra cement) complete all as specified and directed.

All as per serial item No 58 above but in cement mortar (1:4).

M & L for preparation of new plastered surface of wall and applying two coats of distemper oil emulsion over a coat of chalk whiting as a preparatory to distempering complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of old treated plastered surfaces of wall by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt and all loose scales of existing treatment and applying two coats of weather proof exterior emulsion (water based) paint (in camouflage pattern) of dark colours/shade on walls (shade as approved by GE) including 1 coat of water based exterior primer on walls complete all as specified and directed.

S&F in repair 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sq.m in each pane complete all as specified and directed.

S&F in repair 4 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sq.m in each pane complete all as specified and directed.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fixing in repair 15 mm bore, chromium plated, Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.

Supply and fixing in repair 15 mm bore, chromium plated, Stop angle valves, cast copper alloy screwed pressure, with crutch of butterfly handle, long shank and cup, screwed both ends for iron pipe for unions and fixed, complete all as specified and directed.

S&F in repair shower roses, brass, chromium plated with or without swivel joints 125mm size incl fixing to steel pipe complete all as specified and directed.

Supply and fixing in polythene connection of low density polyethylene (LDPE) pipes of pressure rating 2.5 Kgf/Sqcm, 45cm long with and including two brass union couplings, heavy duty, suitable for 15mm bore pipe, one on each end for connecting polyethylene pipe to GI pipe and fixed complete all as specified and directed.

Supply and fixing in repair brass, chromium plated, tubular towel rail, 20 mm dia, D type 60 cm long between flanges complete all as specified and directed.

Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fixing in repair vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests including provision of cement concrete bedding, complete all as specified and directed.

Supply and fixing in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed.

Supply and fixing in repair Vitreous China wash basin, white, flat back, size 550x400mm, including cutting for and pinning in ends of brackets, including 32 mm dia CP waste waste fitting and PVC waste pipe of required length complete all as spcified and directed.

Supply and fixing in repairs 25mm dia, Harrison rails, Mild steel, chromium plated, curtain rail fixing with brackets stops complete all as specified and directed.

Supply and fixing 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair coloured composite pattern vitreous china wash down water closet pan (pedestal pattern) of any colour approved by GE, twin flush system, including soft close seat cover, complete all as specified and directed by Engr-in-Charge. Note:- Model and make as approved by GE.

S&F in repair of Vertical and Horizontal Venetian Blinds of superior quality and of leading manufactures, with approved colour, shade and fabrics including the cost of necessary powder coated aluminium channels, rollers and other accessories complete all as per manufacture’s specifications, complete all as specified and directed.

Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for taking credit to be measured separately including making good the disturbed portion/surface complete all as specified and directed.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated and (FRLS) unsheathed size 1.5 sqmm with PVC concealed Conduit medium grade, ISI marke ( dia not less than 25 mm) with fixing accessories for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet including continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly all as specified and directed.

All as per item No 81 above but for one 3/5 pin socket 5 Amp on same board, with 1.5sqmm wire.

All as per item No 81 above but for one 3/5 pin socket 5 Amp on independent board with 1.5sqmm wire.

All as per item No 81 above but for 3 pins socket outlet 15 Amps independent with 4.0 sq mm including continous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sq mm complete all as specified and directed. Note:- (For item 81 to 84 ) Cost for making good disturbed surface below existing point wiring taken out vide item No 80 and cutting chases and making good of disturbed surfaces by cement & sand mortar (1:3) and surface finish as per adjustment surface conduit and all accessories as required for concealed point wiring vide item No 81 to 84 as applicable shall be deemed to be included in the unit rate quoted against these items.

M&L for point wiring with multistranded copper conductor cable, PVC insulated and unsheathed size 1.5 sqmm (FRLSH) drawn in and including PVC casing and caping with fixing accessories for one light /fan point controlled by one switch with pressed steel concealed terminal boxes covered with 3 mm thick laminated sheet incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly all as specified and directed.

All as per item No 85 above but for one 3/5 pin socket 5 Amp on same board with 1.5 sqmm wire.

All as per item No 85 above but for one 3/5 pin socket 5 Amp on independent board with 1.5 sqmm wire.

All as per item No 85 above but for 3/5 pins socket outlet 15 Amps independent with 4.0 sqmm including continous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sqmm complete all as specified and directed.

S&F switch, piano, flush type/Bell push, 5 Amps, single pole one way 230 Volts, AC, complete all as specified and directed.

S&F socket, 3/ 5 pins, 6 Amp, flush type piano (multi purpose), 230 Volts , AC, complete all as specified and directed.

S&F Socket, 15 Amps, flush type, 3/ 6 Pin, 230 Volts , AC, complete all as specified and directed.

S&F switch, 15 Amps, flush type, 230 Volts , AC, complete all as specified and directed.

S&F Modular switch, flush type, 5/6 Amps, single pole, one module, white colour, 230 Volts, AC, complete all as specified and directed.

S&F Modular switch, flush type, 15/16 Amps, single pole, one module, white colour, 230 Volts , AC , complete all as specified and directed.

S&F Modular socket, 3 pins combined, 5/6 Amp, flush type (multi purpose) two module , 230 Volts , AC, complete all as specified and directed.

S&F Modular socket, 5 /6 pins combined, 15A/16 Amp, flush type(multi purpose), two module, 230 Volts , AC, complete all as specified and directed.

S&F Modular white cover plate with frame suitable for three module way 230 Volts, AC, complete all as specified and directed.

S&F Modular white cover plate with frame suitable for four module way 230 Volts , AC, complete all as specified and directed.

S&F Modular white cover plate with frame suitable for six module way 230 Volts , AC complete all as specified and directed.

S&F Ding Dong door bell 230 Volts , AC complete all as specified and directed.

S&F Bell push flush type 5 Amps, single pole one way 230 Volts , AC complete all as specified and directed.

S&F Modular Bell push flush type 5 Amps, single pole one way 230 Volts , AC complete all as specified and directed.

S&F ceiling rose, PVC / Polycarbonate isolated body ,surface backlite, 65x50mm, three terminals, 230 Volts , AC complete all as specified and directed.

S&F modular stepped type electronic fan regulator flush type,2-way 230 Volts , AC complete all as specified and directed.

S&F stepped type electronic fan regulator flush type 230 Volts , AC complete all as specified and directed.

S&F Batten holder PVC/Polycarbonate base / back suitable for LED lamp. 230 Volts , AC complete all as specified and directed.

S&F LED Bulbs 9/10W B-22 Pin type 230 Volts , AC complete all as specified and directed.

S& F PVC Combination Box type complete with switch & socket 5/6 Amp ,230 Volts, AC complete all as specified and directed.

S& F PVC Combination Box type complete with switch & socket 15/16 Amp. 230 Volts , AC complete all as specified and directed.

S& F plug top, 16 Amp, 3 Pin 230 Volts , AC complete all as specified and directed.

S& F plug top 05 Amp, 3 Pin 230 Volts , AC complete all as specified and directed.

S& F AC plug top 20 Amp, 3 Pin suitable for AC Box (sheet metal enclosure with a two pin and earth plug and socket ) 230 Volts , AC complete all as specified and directed.

S& F AC socket of 20 Amp, 3 Pin suitable for AC Box (sheet metal enclosure with a two pin and earth plug and socket ) 230 Volts , AC complete all as specified and directed.

S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole 20 amps MCB complete all as specified and directed.

S&F Skylite recess mounting, 36W, LED 2'x2' luminaire integrated electronic driver, optics diffused, complete including electrical connection with copper cable from ceiling rose to fittings and taking down old Unserviceable light fittings of any type and any size complete all as specified and directed.

S&F LED tube light fittings 20W (4 feet) wall mounted LED batten extruded PVC heat sink provided for efficient heat dissipation & integrated electronic driver optics diffused complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings complete all as specified and directed.

S&F LED 6000K (2’ feet), 10W Decorative LED lighting fixture with extruded PVC . heat sink, environmental friendly, energy efficient ready to use pack, complete and including taking down existing fittings complete all as specified and directed.

S&F LED bulkhead luminaire 10W decorative type as per sample complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings complete all as specified and directed.

S&F LED building secuity light 25 watt made up of pressure die cast aluminium housing with mid power LED as lightening source and PC cover having top opening inbuilt LED driver with IP66 protection and impact resistance of IK-07 complete including GI bracket with nut bolts, washers etc including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings complete all as specified and directed.

M&L for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulated FRLSH sheathed copper cable connecting to common earth dolly in and including heavy duty PVC casing caping and dismantling and taking down existing unserviceable wiring, all accessories complete all as specified and directed. NOTE :- 2 runs of 6 Sqmm cable and one run of 6 sqmm cable will be measured as one running meter.

M&L for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulated FRLS sheathed copper cable connecting to common earth dolly in and including heavy duty PVC concealed Conduit medium grade ISI mark 25 mm dia and dismantling and taking down existing unserviceable wiring, all accessories complete all as specified and directed. Note:- Cost making good disturbed surface below existing point wiring taken out vide item No 121 and cutting chases and making good of disturbed surfaces by cement & sand mortar (1:3) and surface finish as per adjustment surface conduit and all accessories as required for concealed point wiring vide item No 121 as applicable shall be deemed to be included in the unit rate quoted against these items.

S&F in repairs VTPN 4 way double door prewired distribution board TPN-DPX 125 MCCB including one No MCCB 125 Amps, 25 kA, 4 pole as incomer and suitable SPN/TP MCBs as outgoing double door type sheet metal enclosure 415V with 200 Amps rated standard busbar of suitable size plate and common neutral link without MCBs with blank plate suitable for 4 way complete and including taking down VTPN DB's complete all as specified and directed. Note : Rates of MCCB and MCB SPN/SP/TP shall deemed to be included in the quoted rates.

S&F in repairs Distribution board 4 way TP&N Double Door are fitted with Bus Bars, Neutral Links suitable for 415V, 50Hz, Blanking Plates, Suitable for TP/FP MCB complete all as specified and directed.

S & F in repairs single pole and neutral sheet metal enclosures for Distribution board (DB's)suitable for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail 240 V, 50 Hz supply double door SP&N DB system 12 ways complete all as specified and directed.

All as per item No 124 above but 8 ways

All as per item No 124 above but 4 ways

S&F MCB, TPN, 63 to 100 Amps, 415V, including all termnials, fitting etc including taking down, complete all as specified and directed.

S&F MCB, SPN, 40-63 Amps, 240V, including all termnials, fitting etc. including taking down, complete all as specified and directed.

S&F MCB, SP, 06 to 40 Amps, 240V, including all termnials, fitting etc including taking down, complete all as specified and directed.

M&L for rewinding of exhaust fan of size 250 to 600 mm sweep Including taking down, dismantiling, opening ,descaling, adjustment, re-fixing, cleaning, greasing, painting, replacing minor spares (ie nut, bolt,washers) and rewinding with proper size enamelled copper wire warnishing complete all as specified and directed. (spares mentioned below shall be measured and paid separatelly)

Supply only Ball bearing

Supply only Brass bushes

Supply only Exhaust fan louvers complete with nut & bolts etc.

Supply only Exhaust fan blade of any sweep with screws/bolts, nuts.

M&L for servicing,Taking down Ceiling fan , Air circulator & wall mounted fans any size and any sweep removing cleaning of dust, properly cleaning greasing of bearing including replacing and connecting up complete all as specified and directed.

M&L for rewinding of Ceiling fan , Air circulator & wall mounted fans of any size any sweep and any capacity of fans using super enameled copper conductor of suitable gauge including insulation varnishing, packing including taking down and refixing the fans in original position complete all as specified and directed. (Note: spares mentioned below shall be measured and paid separatelly)

Supply only Ball bearing

Supply only Brass bushes

supply only 2.5 to 4.0 mfd capacitor

Taking down Geyser of any size and capacity after disconnecting all electrical and water connections, dismantling of geyser for checking of unserviceable parts, repair/replacement of worn out parts, reassembling, testing, cleanig with chemical to clear choking due to scaling and refixing in its original location incl making all necessary electrical & water connections complete all as specified and directed. (Note: Parts will be measured separately and paid for under ‘Supplied only’ rates here-in-after)

Supply only Geyser Element Tringular type 1.5 KW complete Make: ISI Marked

Supply only Geyser thermostate for 1.5 KW complete Make: ISI Marked

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 15 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion, complete all as specified and directed.

GIAN BUILDERS (BID ID -3369453)

SK INFRA INDIA (BID ID -3368912)

laxmi enterprises (BID ID -3370244)

High Tech Metal India (BID ID -3369734)

Singh Associates (BID ID -3377049)

NAVEEN KUMAR TYAGI (BID ID -3369211)