REFURBISHMENT OF ROOM NO 10 RFID LAB ROOM NO 13 VLSI LAB AND ROOM NO 207 9FABRICATION LAB OF DEPTT OF ELECTRONICS ENGINEERING AT DIAT DU GIRINAGAR PUNR 25

Amount

REFURBISHMENT OF ROOM NO 13 (VLSI LAB) OF DEPTT OF ELECTRONICS ENGINEERING AT DIAT (DU) (B&R PORTION) Demolishing cement concerete of any description and in any position not otherwise specifically provided for work incl stacking of serviceable material and disposal of unserviceable material within 50 mtrs lead, etc complete all as specified and directed.

M & L for cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor levelling course and in similar situations 25mm thick complete all as specified and directed.

M&L dark shade ultra charged vitrified coloured glazed ceramic tiles 10mm thick (square/regtangular) polished , area of each tiles exc. 0.42 sqm but not exc 1.00 sqm as in floors etc and jointed neat in cement slurry and pointed in white or colour cement to match over with and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Providing & fixing false ceiling at any all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws complete all as per directions of the Engineer-in- Charge.

Taking down chowkats or frames of wooden or steel exc 1.5 sqm & n.exc. 4 Sqm with Shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F ll nd class Hardwood for Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc.complete all as specified & directed

S&F 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type and both sides with decorative face veneer with lipping/frame to match incl stainless steel butt hinges with necessary screws,etc complete all as specified and directed.

S&F 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed complete all as specified and directed.

S&F 125mm long Extruded brass handles, fabricated type polished etc complete all as specified and directed.

S&F extruded Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed.complete all as specified and directed.

S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.

S&F three track sliding window with 4mm thick tinted glass in two shutter and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing including good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. Series of aluminium section as per Jindal is (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S&F anodised aluminium powder coated (minimum 50 micron thickness) fixed partitions incl door with double action spring one or more rebates including fixing shutter fixed with glass or gauge using standard aluminium section including necessary jointing cleats, glazing clips, rubber packing anodised aluminium snap beadings screws, anodised aluminium fittings such as handles stainless steel adjustable friction stay hinges etc complete all as specified and directed by Eng-in-charge. NOTE:- i) Payment under this item will be made only for the weight of aluminium section. However unit rate quoted shall deemed to including cost of rubber beading fittings such as handles, SS friction stay hinges and fixing of 5.5 mm thick glass etc. ii) Supply only 5.5 mm thick sheet glass and prelaminated particle board be measured and paid separately. iii) Weight of aluminium handles & SS hinges shall not be accounted for payment purpose.

Supply only 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square in exc 0.5 sq.m in each pane complete all as specified and directed.

Supply only 12mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice laminations fixed with screws to frame work complete all as specified and directed.

S & F Door closer Aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats etc complete all as specified and directed.

Demolishing of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Taking down cement plaster ,any description on brick or concrete or stone walls incl racking out joints,hacking for key scrubbing down with water,etc and removal of rubbish off 50 mtrs lead from site,complete all as specified & directed.

M&L for rendering 15mm thick on fair faces of brick work in cm 1:6 finished even and smooth without using extra cement on wall and sides of windows/doors,etc complete all as specified & directed.

M&L for preparation of new /old wall surface internally and applying two coats of Premium acrylic emulsion smooth exterior paint of required [email protected] ltrs/ Xsqm over a coat of alkali resistance [email protected] kg/Xsqm on wall surfaces,etc.complete all as specified and directed.

M&L for preparation of new /old ceiling surface internally and applying two coats of Premium acrylic emulsion smooth exterior paint of required shade @1.67 ltrs/ Xsqm over a coat of alkali resistance primer @ 2.20 kg/Xsqm etc complete all as specified and directed.

REFURBISHMENT OF ROOM NO 10 (RFID LAB), ROOM NO 13 (VLSI LAB) & ROOM NO 207 (FABRICATION LAB) OF DEPTT OF ELECTRONICS ENGINEERING AT DIAT (DU) GIRINAGAR (E&M PORTION) Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials for taking credit and making good disturbed surfaces of walls, floors and roofs etc all as specified and as directed.

Taking down sub main wiring complete including fitting and fixtures, removing materials for making good disturbed surfaces of walls, floors, roof etc, all as specified and as directed.

M & L for Point wiring with proper colour coding complete with and including PVC insulated, unsheathed, flexible bright annealed multi stranded copper conductor single core flame retardant low smoke (FRLS) cables 1.5 Sqmm (22/0.30 mm) 1100 volts grade drawn through in and including heavy grade, rigid non-metallic PVC conduits 25 mm or higher dia as required at site, totally concealed in walls / floors /ceiling and surfaces on trusses by means of saddles & clips etc including all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and modular metal boxes, totally concealed in walls with modular plate including modular cover plate, fixed flush with wall surface by means of brass screws and sunk/cupwashers, for mounting of switches, sockets fan regulators etc; including 1.5 Sqmm (22/0.30 mm) 1100 V grade PVC insulated FRLS, unsheathed flexible, multi stranded, copper conductor cable(green colour) as continuous earthwire connected to metallic bodies of luminaires/fans etc; at one end and to common earth dolly at other end, all as specified and directed for following :- Note :- Cost of cutting chases as required and making good surface to match with existing surface shall deemed to be included in quoted rate.

(a)One light/ Fan point controlled by one, one way switch 6 Amps 240 Volts.

(b)one 3 pin 6 Amp Socket outlet point on Same board including earth wire as per description given above and connected to common earth and earth terminals.

(c)one 3 pin 6 Amp Socket outlet point on Independent board including earth wire as per description given above and connected to common earth and earth terminals.

All as per description of serial item No 25.00 here -in -before but for 3-pin socket out let 15 Amps on independent board with 4 Sqmm Multi std.copper conductor PVC insulated cable 1100 volts grade with continous 4 Sqmm earth wire.

S&F socket 2-in-1 5 pin 6 Amps Modular type (ISI Marked) 2 module universal controlled by by one way switch complete all as specified and as directed by Engr-in-charge.

S&F Switch piano Modular type 6 Amps single pole one way complete all as specified and directed.

S&F socket 5 in 1, 6 /16 Amp Modular type (ISI Marked) 2 module universal controlled by by one way switch complete all as specified and as directed by Engr-in-charge.

S&F Switch piano Modular type 16 Amps single pole one way complete all as specified and directed.

S&F ceiling rose surface type PVC 50 mm dia 3 terminals including PVC mounting block complete all as specified and as directed.

Supply & Fix ceiling fan (after assembling the same) with the existing fan hook/box, 1200 mm (48") sweep, Min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor(BLDC) and connecting up complete with and including three core copper conductor flexible cord of 0.5 Sqmm cross sectional area, of required length including fan rod less than 16mm dia from ceiling rose to procelain connector block of the fan including taking down old U/s ceilings fans of any type all as specified and directed.

S & Fix 2 x 2 Ultra modern recess mounting 36 watts luminaire with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling all as specified and directed. Make : Havells : PLANO2X2 or equivalent in Wipro/Philips/Bajaj/Crompton as approved.

S & F Submain wiring of size 2x4.0 sq. mm + 1x4.0 sq. mm earth wire of FRLS (multistrand) PVC insulated copper conductor single core cable in surfece/recessed as required drawn through in and including concealed PVC conduit not less than 20mm of size complete all as specified and directed.

S & F Submain wiring of size 2x10 sq. mm + 1x10 sq. mm earth wire of FRLS (multistrand) PVC insulated copper conductor single core cable in surfece/recessed as required drawn through in and including concealed PVC conduit not less than 20mm of size complete all as specified and directed. Note for item No 34.00 & 35.00 above :- Cost of cutting chases as required and making good surface to match with existing finish shall deemed to be includng in quoted rate.

S & F single pole and neutral 16 way double door, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, inter connections, powder painted as required complete all as specified and directed.

S&F MCB SPN 63 A, 240V 'C' curve with 10kA breaking capacity all as specified and directed.

S&F MCB SP 6 to 32 Amps 240V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing complete all as specified and directed.

Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps capacity complete all as specified and directed.

Supply and fix air cooled 5 star invertor split unit air conditioner electric driven single phase of capacity of 2 TR, compressor type High EER Twin rotary type-bldc, copper condensor coil including dust filter, air purifier, 3.5 meter lenth connecting pipe of copper and 3.5 meter connecting cable etc as required complete all as specified and directed. MAKE : Model Copper SAC_245V_ADZ (R32) White in Voltas or equivalent in Hitachi/Carrier/Lloyd as approved.

Supply and fix Voltage Stabilizer digital display single phase 5kva 150-250v Copper Motor Winding 5 kVA capacity Standards ISO 9001 : 2008 For 2 Ton Air Conditioner complete all as specified and directed.

S & F PVC Conduits 25 mm size run in walls/surface for provision for telephone cable fixed on wall /concealed and including dismantling of old pipes, cutting chases, pinning in and making good to disturbed surfaces etc complete all as specified and directed by Eng-in-charge.

S & F Telephone Socket/Jack with shutter , RJ-11, modular type, one module complete all as specified and as directed.

S & F Cover plate with frame for telephone socket RJ-11(Jac type) Modular type, two module with pressed metal flush box made out of 2 mm thick MS sheet complete all as specified and as directed.

S& F Modular type Fan step regulator, 120W - 2 module complete all as specified and as directed.

Removing the existing ceiling fan and servicing,rewinding, cleaning and spray painting and refixing the same with necessary 3 core wire and accessories all as directed.

S&F Blades for 1200 mm ceiling fan in place of unserviceable blades including required nuts/washers etc. accessories all as directed.

S&F Canopy for 1200 mm ceiling fan in place of unserviceable Canopy including required nuts/washers etc. accessories all as directed.

S&F down rod 2 feet for 1200 mm ceiling fan in place of unserviceable downrod including required nuts/washers/pins etc. accessories all as directed.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

S & F Submain wiring of size 4x6.0 sq. mm + 1x6.0 sq. mm earth wire of FRLS (multistrand) PVC insulated copper conductor single core cable in surfece/recessed as required drawn through in and including concealed PVC conduit not less than 20mm of size complete all as specified and directed. Note :- Cost of cutting chases as required and making good surfae to match with existing finish shall deemed to be included in quoted rate.

S&F Distribution board sheet metal enclosure double door, factory made fixed flush with wall inside niches for mounting MCBs 230 Volts with bus bars with front openable cover Triple pole and neutral 4 way with suitable size bus bar consumer unit including connection to existing earthing complete all as specified and as directed .

S&F MCB TPN 40 Amps 240V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing.

R J ENTERPRISES

Bharekar Construction

M/S P D TUPE

Mehta and Co.

MAGAR ENTERPRISES

sagar construction