Loading
Loading…
Loading…
Tender Value
₹2.2 Cr
EMD Value
₹2.6 L
Closing Date
21 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SIG/NORTH
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less ;where V= Advertised value of the tender in crores of Rupees N=Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, asper the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information asper format-6, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s)during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i)Three similar works each costing not less than the amount equal to30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Defination of Similar Work :- Any signaling work involving outdoor work and / or addition and /or alteration in existing Indoor signaling system. OR any CLS or RI or EI or TPWS or IBS or ABS or BPAC work involving indoor and/or outdoor. Similar work to include indoor if the tendered work involves addition and / or alteration in existing indoor signaling system and outdoor if the tendered work involves outdoor work. OR Any such work involving activities as given in the name of the tendered work.
14 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall clearly specify whether the tender is submitted on his own or on behalf of a partnership concern. If the tender is submitted on behalf of a partnership concern, he should submit the certified copy of partnership deed (PD) along with the tender and authorization to sign the tender documents on behalf of partnership firm. If these documents are not enclosed along with the tender documents, the tender will be treated as having been submitted by individual signing the tender documents. The tenderer whether sole proprietor, a limited company or a partnership firm if they want to act through agent or individual partners should submit along with the tender or at a later stage, a power of attorney(POA) duly stamped and authenticated by a Notary public or by Magistrate in favour of the specific person whether he or they be partners of the firm or any other person specifically authorizing him or them to submit the tender, sign the agreement ,receive money, witness measurement, sign Measurement Books, compromise, settle, relinquish any claims preferred by the firm and signed No claim certificate and refer all or any dispute to arbitration.
Tenderer should clearly state the status of firm and submit the relevant document in support of authentication, in absence of following/relevant documents the offer of tenderer is summarily rejected: (A)Self-declaration /proprietorship certificate in case of proprietor firm along with POA if any. (B) Partnership deed and power of attorney in case of partnership firm. (C)Certified copy of an extract of resolution passed by the board of directors in case of limited firm or Private Limited Company
(a) Sole Proprietorship Firm: (i)All documents in terms of Para 10 of the Tender Form (Second Sheet)of Tender document
(b) HUF: (i)A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and 1.1.2 he has the authority, power and consent given by other members to act on behalf of HUF. (ii)All other documents in terms of Para10 of the Tender Form (Second Sheet)of Tender document
(c) Partnership Firm: (i)All documents as mentioned in para18 of the Tender Form document
(d) Company registered under Companies Act2013: (i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii)A copy of Certificate of Incorporation(iii)A copy of Authorization/Power of Attorney 1.1.4 issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv)All other documents in terms Para 10 of the Tender Form (Second Sheet) of Tender document
(e) LLP (Limited Liability Partnership): (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from 1.1.5 participation intenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/ LLP or JV in which they were/ are partners/members. Concealment /wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract.(v)All other documents in terms of Para 10 of the Tender Form(Second Sheet).
(f) Registered Society & Registered Trust: (i)A copy of Certificate of Registration (ii)A copy of Memorandum of Association of Society/Trust Deed (iii)A copy of Power of Attorney in favour of 1.1.6 the individual to sign the tender documents and create liability against the Society/Trust. (iv)A copy of Rules & Regulations of the Society (v)All other documents in terms of Para 10 of the Tender Form (Second Sheet) of tender document
Information as per Para 16 of GCC Part (1)(Tender form second sheet Annex-I) related to Employment/Partnership Etc. of Retired Railway Employees and Clauses 59 (9) & 62 (1) (xv) to GCC regarding employment etc. Of retired government officers by railway contractors
Certificate of Information regarding EMPLOYMENT/PARTNERSHIP etc. of Retired Railway Employees with the tender as per the attached proforma, Format 11 of tender document
Certificate of NO RELATIVE being an employee of Western Railway as per attached Performa Format10 of Tender document
Signalling work in connection with Improvement & Upgradation of Yard at at Bilimora, Vedchha, Navsari, Bhestan, Sachin Udhana & Surat of Virar-JoraVasan Section of Mumbai Division, Western Railway.
SG_216_2_144_WA~WR
SG_216_2_144_WA
Open
Works - General
6 Months
Mumbai, Maharashtra
₹0
₹2.6 L
21 Jan 2026
18 Dec 2025
7 Jan 2026
175 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,45,36,405.64 | ||
| — | 500.00 | — | — | ||
| G.I. Bonding wire soft for track circuit bonding 8 S.W.G. (4mm Dia.) or as per instructions of Engineer In-Charge. | — | — | — | 34,085 | |
| — | 4000.00 | — | — | ||
| Channel Pins MS(Galvanized) single roove, 7 mm suitable for 4mm dia bonding wire as per spec No IRS S 17 & RDSO Drg No. S-69/M. | — | — | — | 24,160 | |
| — | 500.00 | — | — | ||
| Drill bits 7.2 mm or as as per instructions of Engineer In-Charge. | — | — | — | 44,920 | |
| — | 1500.00 | — | — | ||
| Copper Lugs 16 to 25 Sqmm for power cable or as per instructions of Engineer In- Charge. | — | — | — | 14,325 | |
| — | 8.00 | — | — | ||
| PVC Jacketed wire rope for track lead connections. PVC jacketed wire rope should be of Galvanized steel wire rope 6mm dia (6x19 stranded wire with steel core of 6 mm dia) sheathed with PVC 2mm wall thickness, overall thickness being 10mm. PVC sheath should be made of type 6 compound as per IS 5831 of 1970.Reclaimed or recycled material should not be used. 100mts bundle required. | — | — | — | 44,425.36 | |
| — | 15.00 | — | — | ||
| Contractor Unit Assly CU Base Assly 851241034-S, RDSO Drg.No. RDSO/S 10911, CG Drg.No.CHS-10911 | — | — | — | 1,82,331.3 | |
| — | 40.00 | — | — | ||
| Transparent cover sub assembly complete with Cover support LH RH, 853087001-S as per RDSO, approved CG drg. No. CSQ-10920 10915 | — | — | — | 14,726.4 | |
| — | 80.00 | — | — | ||
| Supply of Terminal Fixing plate & Bracket along with 8 Terminals type SG-550901- 0209034-001 for Siemens point machine as per the drawing attached. | — | — | — | 25,488 | |
| — | 80.00 | — | — | ||
| Waterproof Galvanized MAIN COVER ASSEMBLY complete spare for POINT Machine comprising of Main cover, CRANK HANDLE HOLE SUB. ASSY, KEY HOLE LOCK SUB. ASSY, DOOR LOCK, RUBBER GASKET of MAIN COVER ASSY, Rubber GASKET (C.H. HOLE LOCK ASSY.), CRANK HANDLE HOLE LOCK BASE, CRANK HANDLE HOLE LOCK LID, PIN (for C.H. HOLE LOCK S/A), RUBBER GASKET (C.H. HOLE LOCK ASSY. LOCKING CAM, KEY code 856051010-s along with Fixing material to trap accumulated air as per Drg no R-ST- 12161, modification in cover as per consignee requirement. Thickness of cover material:- 2mm, galvanizing and power coating shall be done on cover. (Inspection Agency-RITIES/Consignee) | — | — | — | 13,76,918.4 | |
| — | 25.00 | — | — | ||
| — | — | — | 2,76,120 | ||
| WPG AQUATHERM Accepted | : - SL - STANVAC/CORIUM/LOCTITE/MAGNA/HUSKEY CHEMICALS | — | packs | ||
| — | 40.00 | — | — | ||
| Supply of Nylon Insulation for Thick Web point machine, consist of Insulating. (1) plate- 02 Nos . as per RDSO Drg. No-S-34041(2) Nylon Insulation bush-8 Nos , as per RDSO Drg. No- (a) S32199-04 Nos . (b) S-8813-04 Nos , (3) Nylon Insulation Washer 08 Nos, as per RDSO Drg. No. (a) S8640/1-04 Nos . (b) S-8640- 04 Nos. 2) Through rod Insulation = 1 no Bush(RDSO Drg No. CSE8640/1, 2 nos Washers (CSE8640/2) 3) Lock slideInsulation -2 nos Bushes (RDSO Drg No- CSE 8640/A) 4 nos Washers (RDSODrg No. CSE-8640/1). 4) Detection slide insulation =2 nos Bushes (RDSO Drgno. 8641/A), 4 nos Washers (RDSO Drg No-8640/1). 5) SSD Insulation Rod =1no. Plate (RDSO Drg No S325/M), 2 nos . Bushes (RDSO Drg No-T10372), 4nos. Washers (RDSO Drg No T- 10371). 6) SSD Insulation in Rail 1 no . Washer(RDSO Drg No washer : S8640) 1 no Bush (RDSO Drg No S8641/A) 7) Pbracket Insulation :- Insulation Plate 01 (RH) RDSO Drg No: S3265 Insulation Plate = 01 No (LH) RDSO Drg no. S3266 , Insulation Bushes=04 nos. RDSO Drgno S23199 Insulation Washer : 04 nos . RDSO Drg no. S8640. | — | — | — | 39,836.8 | |
| — | 4.00 | — | — | ||
| Supply of Digital Insulation Tester 100V/250V/500V range of Model Rish insu 20 Make :RISHABH or MECO or similar. | — | — | — | 32,961.6 | |
| — | 4.00 | — | — | ||
| Supply of Digital Multimeter of Fluke 289 Industrial, True RMS with temperature, Analog bar graph, Digital display, Backlight, 1000V AC/DC, measure up to 10A, 20A for up to 30 second or Superior. | — | — | — | 2,50,344 | |
| — | 5.00 | — | — | ||
| Digital low current clamp meter to measure current leaks (parasitic draw down to 1 mA) and electric loads from 1mA to 100 Amp AC/DC, Voltages from 0 to 600V AC/DC, small jaw size to measure current in signalling circuit, 4 digit display. Make -Fluke, GTC/KEW, Scope or superior with better specification as mentioned with all accessories like test lead, batteries and carrying case, sample may be got approved from consignee before supply. | — | — | — | 90,971.7 | |
| — | 4.00 | — | — | ||
| Professional AC/DC clamp meter 3 ¾ digit, true RMS measurement, For Measurement of DC/AC currents up to 1000A, Voltage up to 600V, resistance up to 40 M, and frequency up to 1 MHz with a set of leads & carrying case. Model - DCM39A or equivalent/ higher make Motwane /Stanley /Fluke/ Megger. | — | — | — | 51,414.36 | |
| — | 4.00 | — | — | ||
| Hand Operated Hydraulic crimping tool with die sets of capacity from 16 sq.mm to 400 Sq.mm and carry bag for transportation ACCEPTED MAKE/BRAND ? Voltz and similar( Warranty Period : Upto 30 months from the date of supply) | — | — | — | 23,741.6 | |
| — | 4.00 | — | — | ||
| Supply of Digital earth tester with in built rechargeable battary 3.5 digit LCD display, testing range 0.01 ohm to 2000 ohm & all accessories as four spikes, suitable length (10M, 20M, 30M, 40M) on winder, battary charger, carrying bag, operating manual, hammer etc. Supplier should submit warranty and calibration certificate. Make: Waco or Motwane or CIE or Meco. (Warranty Period : Upto 30 months from the date of delivery.) | — | — | — | 24,378.8 | |
| — | 5.00 | — | — | ||
| Supply of Standard Tools set as per latest tool issued by HQ. | — | — | — | 1,76,586.4 | |
| — | 2.00 | — | — | ||
| Road Measuring Cycle, made of Aluminum with 05 digit counter, foldable with the bag. | — | — | — | 9,031.68 | |
| — | 2.00 | — | — | ||
| Supply of Cable Fault locator as per specification attached. Make: Tempo/Stanley Communication Model Sidekick Plus Kit Standard (1155-5001) or equivalent. | — | — | — | 11,57,891.52 | |
| — | 2.00 | — | — | ||
| Supply of in-built GNSS based cable route tracer with 10W, 500mA, 85V transmitter suitable for detecting & mapping underground cables with accuracy which can up to 3-5 cm or better, with current direction up/down arrows, Remote calibration check feature. Supply shall include inbuilt RTKenabled receiver, transmitter, compatible dual Bluetooth android phone with RTK mobile application pre-installed in android device along with minimum 5 years subscription, compatible with NTRIP andRTCMv3.X messaging standards and holder & standard accessories. Make/Model: Radio detection RD8200GS or similar. | — | — | — | 27,74,200 | |
| — | 2.00 | — | — | ||
| Canon A3, A4 and LegalColour Laser ComputerPrinter cum scanner ofreputed make as pertechnical specification.Model may be got apprvoedfrom Railway in-chargebefore supply of material. | — | — | — | 4,30,198 | |
| — | 2.00 | — | — | ||
| Ferrule And Label Printer similar to Brother model No. PT E850TKW with Extra 5 nos of Tap cartridge Accepted Brother model No. PT E850TKW with Extra 5 nos of Tap cartridge as per tender description ( Warranty Period : Upto 30 months from the date of supply) | — | — | — | 1,02,650.56 | |
| — | 10.00 | — | — | ||
| Wheel detection sensor with 10 meter cable for Siemens MSDAC as per RDSO/SPN/176/2005 ver. 2 Siemens make. | — | — | — | 19,13,016 | |
| — | 10.00 | — | — | ||
| High frequency TX Coil and RX Coil (each set consists of web mounting type TX Coils - 01 No., RX Coils - 01 No 10 mtr) - One Set for Multi Section Digital Axle Counter Systems as per RDSO Specn. No.RDSO/SPN/176/2013 or latest. CEL make | — | — | — | 3,06,800 | |
| — | 10.00 | — | — | ||
| Supply of Colour Light Signal Complete. ALL MS PARTS HOT DIP GALVANIZED -100 MICRON or as per instruction of railway incharge This includes: - (1). Post Tubular 140mm Dia, as per IRS:S-6 / 81 or Latest & RDSO Drg. No. SA-24625 (Advance). (2). CI Base (As per IRSS-10 & RDSO Drg. No. 2011 / M with latest assembly). (3). Ladder Assembly, as per RDSO Drg. No. SA-23156, with Base, Ladder Guard rail (complete) to Drawing No. SA23138 Alt.1 (1No), Platform to Drawing No. SA23134Alt.1 (1No), Front Maintenance Platform, MS Supporting bracket to Support Ladder. Ladder stay (small) to Drawing No. S23159Alt.1(2Nos.), Ladder stay(large) to Drawing No. S23160 Alt.1 (2Nos.), Ladder section to Drawing No. SA23157 Alt.1 (1Nos.) Stay clamp to Drawing No.SA2062 / M (2no), Rail Clamp to Drawing No. S 2066 / M (1 No.) (4). Signal Front Staging Complete Assembly for CLS Unit. (5). Signal back staging as per extent WR practice. Note: The height of the post shall be 5.5 Long. (6) Signal Number Plate (CSTEDrg No CSTE/6186) All material required for this work shall be supplied by the contractor. Material used for number plate should comply with the specification ETI/OHE/33A(12/97) Rev-8. CSTE drawing is to be followed for dimensions only. Inspection: (i)RDSO/RITES if value of item in work more than 5 lakhs(ii)Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by the Railway Board. | — | — | — | 2,12,400 | |
| — | 10.00 | — | — | ||
| Signal Number Plate (CSTEDrg No CSTE/6186) All material required for this work shall be supplied by the contractor. Material used for number plate should comply with the specification ETI/OHE/33A(12/97) Rev-8. CSTE drawing is to be followed for dimensions only. | — | — | — | 6,155.9 | |
| — | 4.00 | — | — | ||
| Offset brackets for Main Signal, made of tubular steel, outer diameter 140 mm, thickness of pipe 4.5 mm. horizontal length of pipe 545 mm & vertical length of pipe 324 mm with fixing arrangement on Main Signal post as per Drawing No SW/554/G/R. | — | — | — | 17,757.12 | |
| — | 4.00 | — | — | ||
| Position Light Shunt Signal Unit Complete with Post (made of GI Pipe of 80 mm Diameter Medium Class IS Spec. No. IS: 1239 Pt. 1/1990) Base, Hood, and Cover, etc. as per Drg. No. SA-23840, Signal Number Plate, suitable for LED Signal Lighting Unit. (Supply of LED Unit is not covered in this item). | — | — | — | 18,120.28 | |
| — | 4.00 | — | — | ||
| Position Light Shunt Signal Unit Complete, with offset bracket, hood, Cover etc. as per Drg. No. SA-23840 suitable for LED Signal Lighting Unit. (Supply of LED Unit is not covered in this item). | — | — | — | 13,438.96 | |
| — | 10.00 | — | — | ||
| Supply of SS Location boxmade of SplGrade SS 304of size as per drg.No.DRM/SG/945 (Half app.Case).Dimension of Caseshould be asperDRM/SG/945. It includesAngle frameRelay framefixture , earthing Rod,Drawing Board, GlassReinforcedPolyester SheetMoulding Compoundssheetfor fixing ARA terminal,Lock etc.as per WR CSTEDrg No. 6285.Themanufacturer's certificate inregard tograde of stainlesssteel and test report shallbe submitted at the time ofsupply. | — | — | — | 5,19,980.6 | |
| — | 10.00 | — | — | ||
| Supply of Modular LocationBox as perWR CSTE Drg No.6285 Modular Type SS304Full Location Box. Itincludes Angleframe Relay frame fixture , earthingRod, Drawing Board, GlassReinforcedPolyester SheetMoulding Compoundssheetfor fixing ARA terminal,Lock etc.as per WR CSTEDrg No.6285.Manufacturer'scertificate in regard togradeof stainless steel and testreportshall be submitted atthe time of supply. | — | — | — | 8,74,523.3 | |
| — | 20.00 | — | — | ||
| — | 5000.00 | — | — | ||
| — | 40.00 | — | — | ||
| — | — | — | 4,16,123.2 | ||
| — | 40.00 | — | — | ||
| — | — | — | 25,960 | ||
| — | 1000.00 | — | — | ||
| — | — | — | 1,69,700 | ||
| — | 100.00 | — | — | ||
| — | — | — | 70,100 | ||
| — | 50.00 | — | — | ||
| — | — | — | 58,514 | ||
| — | 10.00 | — | — | ||
| — | — | — | 47,200 | ||
| — | 40.00 | — | — | ||
| — | — | — | 53,837.2 | ||
| — | 40.00 | — | — | ||
| — | — | — | 17,73,040 | ||
| — | 40.00 | — | — | ||
| Ground connections, complete set with hot dip galvanised suitable for IRS type / approved point Machine for ordinary turnout with tongue attachment insulation and other insulation as per RDSO Drg. S/3361@47>47@63 (for IRS type point machine) with latest amendments. However the ground connection shall be procured only after confirmation from Railway engineer as per site condition /type of machine/turnout. The material of the same shall be equivalent to IS2062 and ultrasound test report shall be submitted. | — | — | — | 3,55,259.2 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
STyard144TD.pdf
ATTACHMENT
STyard144TD.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .