Welcome maintenance to MD Accn at 23 ED and Repairs to area drainage interlocking/Chequered tiles, hardstanding, compound wall and fencing in certain MD and OTM Accn at AF StnAvadi

Amount

Taking down cement plaster on brick or concrete walls/ ceiling surfaces in patches etc. of any description including racking out joints, hacking for key, scrubbing down with water; rubbish off the premises etc., complete all as specified and as directed.

Material and labour for rendering 5mm thick in cement mortar (1:3) on fair faces of concrete surfaces as in ceilings, finished even and smooth without using extra cement etc., complete all as specified and as directed.

Material and labour for rendering 10mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces as on walls, finished even and smooth without using extra cement etc., complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of ceilings and applying two coats of white wash all as specified and as directed.

Material and labour for Preparation of old plastered or unplastered surfaces of walls including brooming down, steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash all as specified and as directed

All as per item No. 6.00 described here-in-before but on ceiling.

Material and labour for Preparation of old plastered or unplastered surfaces of walls including brooming down, steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, washing, rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper all as specified and as directed.

Material and labour for complete removal of existing treatment including preparation of wall surfaces and applying two coats of oil emulsion distemper over a coat of alkali resistant primer all as specified and as directed.

Material and labour for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint etc., complete all as specified and as directed.

Material and labour for preparation of old painted steel and iron surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint etc., complete all as specified and as directed.

Taking up or down steel tubing and connections, including removal to store etc all as directed for 15mm bore

All as above but for 20mm bore

S&F Unplasticised PVC pipes and fittings of 15mm dia of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed

S&F Unplasticised PVC pipes and fittings of 20 mm dia of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed

S & F in repair PVC Bib taps PTMT (Symet) 15mm dia (Any colour) screwed down for iron pipe or for brass ferrule. (Make : Prayag or equivalent)

S&F in repairs 15mm dia Pillar tap standard of PTMT any colour screwed for iron pipe (minimum weight 15 mm -110 gm)

S&F in repairs 15mm dia stop valve of PTMT any colour screwed for iron pipe and fixed (minimum weight 15 mm -90 gm)

S&F in repairs 15mm dia angle valve of PTMT any colour screwed for iron pipe and fixed (minimum weight 15 mm -90 gm)

S&F in repairs Swivel shower of PTMT any colour for fixing with 15 mm pipe ( minimum weight 40 gm) complete all as specified and as directed.

S & F in repair PVC grating 140mm round PTMT (minimum weight 100 gms) with or without dome.

S & F in repair 32mm bore PVC waste pipe for sink / wash basin 90cm long.

S & F in repairs PVC connections 15mm size with PTMT nuts of length 450mm.

S & F in repairs, PVC flushing cistern syphonic action type, low level 10 liter capacity incl flush pipe and all accessories.

S & F in repairs for vitreous china wash basin white flat back, size 580x450mm incl brackets, cutting for and pinning in ends or brackets.

S & F in repairs 20mm bore, ball cock, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms)

S & F in repairs bib tap chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for union pipe or brass ferrule & fixed to 15mm dia pipe all as directed.

S&F in repairs pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or cold with long screwed shanks and flynuts, scewed for union pipe and fixed to 15mm dia pipe.

S&F in repairs brass CP two way bib tap of 15mm dia.

S & F in repairs of 2-in-1 faucet with 1.5m tube stainless steel and hook all as directed.

S&F in repairs tubular towel rail brass chromium plated, 20mm dia, D type 60 cmm long between flanges complete all as specified & directed.

S&F in repairs Vitreous china water closet pan ( pedestal pattern), white including fixing bolts etc including plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device.

S & F in repairs Vitreous china squatting pan of 'Orissa' pattern of size 580x 440mm white with "integral foot rests, complete incl provision of lime concrete bedding all as directed.

S & F in repairs stainless steel sinks with drainage board made of 1mm thick kitchen with plugs washer, waste pipes, cast iron cantilever brackets, connecting union to pipe over all size 915mm x 460mm bowl size 410 x 330 x 160mm, including bedding in cement mortar to dwarf wall including fixing cantilever brackets and connecting unions to pipe.

S&F in repairs Stainless steel plate rack of size 900X800X230mm with screws and necessary fittings incl cutting to hole fixed to wall complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes for the tanks of capacity exc 250 litres and not exc 500 litres and writing date of cleaning in synthetic enamel paint .

Dismantling floor, hearth or wall tiling including cement mortar bedding,(but not backing) and rubbish off the premises complete all as specified and as directed.

M&L Non skid light coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc,confirming to IS: 15622 : 2006 grade B II (a) matt superior finish flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15 mm thick in CM 1:4 as bedding layer for floor finishes complete all as specified and as directed.

M&L Non skid light coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, as in skirting etc,confirming to IS: 15622 : 2006 grade B II (a) matt superior finish flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 10 mm thick in CM 1:3 as bedding layer for floor finishes complete all as specified and as directed.

S & F Glazed ceramic coloured tiles of 300x200x7mm thick tiles on vertical surfaces using glazed economy finish grade B III ceramic tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match over rendering in CM 1:3 , 10mm thick on fair faces of brick/concrete wall surfaces complete all as specified and as directed.

Taking out old serviceable glass of any description, from old wooden or metal frames, or stone, concrete or brick surrounds, any thickness or size; hacking out old putty or removing beads etc. including making good breakages in taking out and removing from site, all as specified and as directed .

S&F 3mm thick plain sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm.m in each pane.

S&F 4mm thick figured glass pin headed type and glazing with oil putty in squares not exc 0.5 sqm in each pane all as specified and as directed .

S&F in repair galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperature 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed by Engineer-in-Charge.

S & F 300mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified & directed.

M & L in repair for 18/19mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with scruwes to timber frame work including teakwood lipping 6mm thick fixed with nails fixed for cub board shutter.etc all as specified and as directed by Engr-in-charge.

S&F in repairs particle boards 18/19mm thick interior grade BWR type adhesive, fixed with screw to timber frame in shelves,drawers etc, all as specified and as directed .

S&F in repair for Harrison Curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.in repair all as specified and as directed by Engr-in-charge

Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm and easing, adjusting and also refixing builders hardware as required and renewal of unserviceable screws and refixing in the same opening incl painting touch up to match with the existing colour complete all as specified and as directed.

S&F 300 mm long Aluminium alloy anodised sliding door bolts with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium and fixed.

S&F in repair for 200mm length aluminum, anodised, barrel tower bolts of extruded section and fixed all as specified and directed by Engineer-in-charge.

S&F in repair for 150mm length aluminum, anodised, barrel tower bolts of extruded section and fixed all as specified and directed by Engineer-in-charge.

S&F 150mm size aluminum handles, cast type anodised complete all as specified & directed all as specified and directed.

Demolition of brick work build in cement mortar complete.

M&L Brick work with fly ash bricks, straight or curved on plan exc 6 meter mean radius, built in CM 1:4 complete all as specified and as directed.

M&L rendering 15mm thick on wall/vertical fair surface of brick work/concrete work in CM 1:4, surfaces finished even and smooth without using extra cement all as specified

M&L PCC 1:2:4 type B0 (12.5mm graded aggregate ) as in coping of chajjas and similar work including necessary formwork of straight, rough finished concrete surfaces complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thikness (below or above ground level) complete

M&L for 100mm thick PCC 1:2:4, type B2 (using 40mm graded stone aggregate) as in hardstanding finishing exposed edges fair or rounding or chamfered complete all as specifed and directed

M&L for 100mm thick , PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base complete all as specifed and directed.

M&L for 50 mm thick Sand filling and levelling including watering and consolidation complete all as specified and directed.

M & L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified.

M&L for chequered cement concrete tiles mixed with grey cement and pigment of size 200x 200 x25 mm thick set jointed and pointed in neat cement slurry in floors incl 20 mm thick screed in CM 1:4 complete all as specified and as directed.

S & F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed

S & F for 5 feet pulley operated drying system consisting of Auminium pipe of outer dia 22 mm and inner dia of 19.80mm, pulleys made of delrin with rope guide mounted on channel pair of length 24 inches distance between two pipes is adjustable locking system to hide rope knot channel to be mounted or fixed with self tapping screw provided with kit rope wiill be polyester branded undyed nylon of 4mm dia fixing to ceiling as specifed and directed by Engr-in-charge and min weight of one pipe shall not be less than 0.20 Kg/M min weight of rope shall not be less than 550 grams/unit for four pipes with al accessories and making good distrubed portion/surfaces if any while fixing drying unit complete all as specified and directed by Engr-in-charge (Make Easy dry System or equivalent as approved by GE)

S & F (4 pipes of 4.5 feet) wall cmounted and consisting of four anodised aluminium pipe each of outer dia 22mm and inner dia 19.8mm mounted on anodised aluminium angle of size 40 x 40 x 3mm weight of stand not less than 1.6 Kg complete all as specifed and directed by Engr-in-charge (Make Easy dry System or equivalent as approved by GE)

SUBAMAGENCYANDCONSTRUCTION

Shri Varaghaa

S K ENTERPRISES

M/s Omm Muruga Enterprises