Roof Treatment work at Old Principal Office Building of Raiganj Government Medical College and Hospital under Uttar Dinajpur Division, PWD in the district of Uttar Dinajpur

Stripping off worn out plaster and racking out joints of walls, ceilings etc. upto any height and any floor etc.

3rd Floor

Brick work with 1st class bricks in cement mortar (1:6)

In superstructure

3rd Floor

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface]

With 1:6 cement mortar

15 mm thick plaster

Supplying & laying 3 mm thick pre-fabricated plastomeric water proofing membrane conforming to EN 12311-1 & ASTMD 5147, manufactured with atactic poly propylene (APP) modified premium grade asphalt , specially reinforced with non-woven polyester core with polyester reinforcement@160 gms per sqm & both faces covered with thermo-fusiblepolyethylene film /MineraL on top face over a coat of primer@ 0.40 lit/sqm of manufacturer's specification on smooth,clean dry surface prepared wherever required.Lapjoint shall be provided of 75 mm in longitudinal & 100 mm intransverse direction and fused using LPG/ Propane torchemploying extra care ensuring full bondage, complete removal of entrapped air and sealing edges into grooves in appropriate manner as per direction of Engineer -in-charge all complete including materials,labour and applicable taxes. (Payment shall be made on the basis of finished surface area.). Membrane Property: Softening Point > 150 deg C, Cold Flexibility < -6 deg C, Tensile Strength, N/cm : 600 (longitudinal), 450 (transverse), Tearing Strength, N: 300 (longitudinal), 200 (transverse)

3rd Floor

Applying Exterior grade Acrylic primer of approved quality and brand on astered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.direction of the EIC.

Two Coats

3rd Floor

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.

Normal Acrylic Emulsion

3rd floor (Two Coat)

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc.) complete.

UPVC Pipes:

110 mm. Dia.

UPVC Fittings:

Plain Tee

110 mm. Dia.

Bend 87.5 degree

110 mm. Dia.

ADD GST 18%

ADD LABOUR WEALFARE CESS 1%

Please Enable Macros to View BoQ information