Replacement and Automation of pumping machinery of various Water Supply Schemes of Tube well Sub Division Baddi in Doon area of Solan District (HP) Job No.-1.

Amount

Supply and erection of submersible pumping machinery with allied accessories of LWSS Kondi Narangpur

Supply and errection of star rated enrgy efficient Submersible pumping set of KSB/ Calama/ WPIL/ Crompton/ BS/ SABAR/ Oswall Kirloskar or any other approved make conforming to latest relevant BIS Code 8034:1976. The pump should be fitted with bronze impeller or suitable alloys suitable for handling Clear water having greased packed bearings and shaft with wound stator on motor side and with soft protection sleeve on pump side ensuring better life for shaft coupled to a submersible squirrel cage electric induction motor (water proof type) of required HP & 2900/1450 rpm of reputed make conforming to BIS 9283-1979 latest with upto date amendments, totally dust and water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber and grease packed lubricated bearings and provided with stainless steel thrust bearing to with stand non vertical loads with minimum wear and tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guards, erection clamps, cable clips, depth gauge of approved class etc. The work should be completed to the entire satisfaction of the Engineer-in Charge. The HP are indicative, the design/drawings of Pumping Machinery is to be got approved by L-1 Contractor from the competent authority before placing supply order for the same after finalisation of tender The rates shall be for complete Job to run the machinery in proper working. The pumping machinery & its accessories etc should meet with the following requirements.

2 sets (1working & 2nd set standby) for duty condition discharge of = 8.88 LPS Head = 119.30 Mtr

The BHP is to be offered by the bidder and rate shall be filled in by the contractor per set.

1 No. panel (Suitable for above P/M of LWSS Kondi Narangpur).

Supply and erection of submersible pumping machinery with allied accessories of LWSS Rautanwala

Supply and errection of star rated enrgy efficient Submersible pumping set of KSB/ Calama/ WPIL/ Crompton/ BS/ SABAR/ Oswall Kirloskar or any other approved make conforming to latest relevant BIS Code 8034:1976. The pump should be fitted with bronze impeller or suitable alloys suitable for handling Clear water having greased packed bearings and shaft with wound stator on motor side and with soft protection sleeve on pump side ensuring better life for shaft coupled to a submersible squirrel cage electric induction motor (water proof type) of required HP & 2900/1450 rpm of reputed make conforming to BIS 9283-1979 latest with upto date amendments, totally dust and water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber and grease packed lubricated bearings and provided with stainless steel thrust bearing to with stand non vertical loads with minimum wear and tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guards, erection clamps, cable clips, depth gauge of approved class etc. The work should be completed to the entire satisfaction of the Engineer-in Charge. The HP are indicative, the design/drawings of Pumping Machinery is to be got approved by L-1 Contractor from the competent authority before placing supply order for the same after finalisation of tender The rates shall be for complete Job to run the machinery in proper working. The pumping machinery & its accessories etc should meet with the following requirements.

2 sets (1working & 2nd set as stand by) for duty condition discharge of = 5.17 LPS Head = 125 Mtr

The BHP is to be offered by the bidder and rate shall be filled in by the contractor per set.

1 No. panel (Suitable for above P/M of LWSS Rautanwala).

Supply and erection of submersible pumping machinery with allied accessories of LWSS Malkhumajra)

Supply and errection of star rated enrgy efficient Submersible pumping set of KSB/ Calama/ WPIL/ Crompton/ BS/ SABAR/ Oswall Kirloskar or any other approved make conforming to latest relevant BIS Code 8034:1976. The pump should be fitted with bronze impeller or suitable alloys suitable for handling Clear water having greased packed bearings and shaft with wound stator on motor side and with soft protection sleeve on pump side ensuring better life for shaft coupled to a submersible squirrel cage electric induction motor (water proof type) of required HP & 2900/1450 rpm of reputed make conforming to BIS 9283-1979 latest with upto date amendments, totally dust and water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber and grease packed lubricated bearings and provided with stainless steel thrust bearing to with stand non vertical loads with minimum wear and tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guards, erection clamps, cable clips, depth gauge of approved class etc. The work should be completed to the entire satisfaction of the Engineer-in Charge. The HP are indicative, the design/drawings of Pumping Machinery is to be got approved by L-1 Contractor from the competent authority before placing supply order for the same after finalisation of tender The rates shall be for complete Job to run the machinery in proper working. The pumping machinery & its accessories etc should meet with the following requirements.

2 sets (1working & 2nd set as stand by ) for duty condition discharge of = 5.99 LPS Head = 82.59 Mtr

The BHP is to be offered by the bidder and rate shall be filled in by the contractor per set.

1 No. panel (Suitable for above P/M of LWSS Malkhumajra

Supply and erection of submersible pumping machinery with allied accessories of LWSS Dumanwala)

Supply and errection of star rated enrgy efficient Submersible pumping set of KSB/ Calama/ WPIL/ Crompton/ BS/ SABAR/ Oswall Kirloskar or any other approved make conforming to latest relevant BIS Code 8034:1976. The pump should be fitted with bronze impeller or suitable alloys suitable for handling Clear water having greased packed bearings and shaft with wound stator on motor side and with soft protection sleeve on pump side ensuring better life for shaft coupled to a submersible squirrel cage electric induction motor (water proof type) of required HP & 2900/1450 rpm of reputed make conforming to BIS 9283-1979 latest with upto date amendments, totally dust and water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber and grease packed lubricated bearings and provided with stainless steel thrust bearing to with stand non vertical loads with minimum wear and tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guards, erection clamps, cable clips, depth gauge of approved class etc. The work should be completed to the entire satisfaction of the Engineer-in Charge. The HP are indicative, the design/drawings of Pumping Machinery is to be got approved by L-1 Contractor from the competent authority before placing supply order for the same after finalisation of tender The rates shall be for complete Job to run the machinery in proper working. The pumping machinery & its accessories etc should meet with the following requirements.

2 sets (1working & 2nd set as stand by ) for duty condition discharge of = 3.22 LPS Head = 112.50 Mtr

The BHP is to be offered by the bidder and rate shall be filled in by the contractor per set.

1 No. panel (Suitable for above P/M of LWSS Dumanwala

Supply and erection of submersible pumping machinery with allied accessories of LWSS Haripur Sandholi)

Supply and errection of star rated enrgy efficient Submersible pumping set of KSB/ Calama/ WPIL/ Crompton/ BS/ SABAR/ Oswall Kirloskar or any other approved make conforming to latest relevant BIS Code 8034:1976. The pump should be fitted with bronze impeller or suitable alloys suitable for handling Clear water having greased packed bearings and shaft with wound stator on motor side and with soft protection sleeve on pump side ensuring better life for shaft coupled to a submersible squirrel cage electric induction motor (water proof type) of required HP & 2900/1450 rpm of reputed make conforming to BIS 9283-1979 latest with upto date amendments, totally dust and water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber and grease packed lubricated bearings and provided with stainless steel thrust bearing to with stand non vertical loads with minimum wear and tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guards, erection clamps, cable clips, depth gauge of approved class etc. The work should be completed to the entire satisfaction of the Engineer-in Charge. The HP are indicative, the design/drawings of Pumping Machinery is to be got approved by L-1 Contractor from the competent authority before placing supply order for the same after finalisation of tender The rates shall be for complete Job to run the machinery in proper working. The pumping machinery & its accessories etc should meet with the following requirements.

2 sets (1working & 2nd set as stand by) for duty condition discharge of = 4.34 LPS Head = 107.78 Mtr

The BHP is to be offered by the bidder and rate shall be filled in by the contractor per set.

1 No. panel (Suitable for above P/M of LWSS Haripur Sandholi

Supply and erection of submersible pumping machinery with allied accessories of LWSS Baddi

Supply and errection of star rated enrgy efficient Submersible pumping set of KSB/ Calama/ WPIL/ Crompton/ BS/ SABAR/ Oswall Kirloskar or any other approved make conforming to latest relevant BIS Code 8034:1976. The pump should be fitted with bronze impeller or suitable alloys suitable for handling Clear water having greased packed bearings and shaft with wound stator on motor side and with soft protection sleeve on pump side ensuring better life for shaft coupled to a submersible squirrel cage electric induction motor (water proof type) of required HP & 2900/1450 rpm of reputed make conforming to BIS 9283-1979 latest with upto date amendments, totally dust and water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber and grease packed lubricated bearings and provided with stainless steel thrust bearing to with stand non vertical loads with minimum wear and tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guards, erection clamps, cable clips, depth gauge of approved class etc. The work should be completed to the entire satisfaction of the Engineer-in Charge. The HP are indicative, the design/drawings of Pumping Machinery is to be got approved by L-1 Contractor from the competent authority before placing supply order for the same after finalisation of tender The rates shall be for complete Job to run the machinery in proper working. The pumping machinery & its accessories etc should meet with the following requirements.

2 sets (1working & 2nd Set as stand by) for duty condition discharge of = 15.00 LPS Head = 71.49 Mtr

The BHP is to be offered by the bidder and rate shall be filled in by the contractor per set.

1 No. panel (Suitable for above P/M of LWSS Baddi

Supply and erection of submersible pumping machinery with allied accessories of LWSS Landewal Kalyanpur)

Supply and errection of star rated enrgy efficient Submersible pumping set of KSB/ Calama/ WPIL/ Crompton/ BS/ SABAR/ Oswall Kirloskar or any other approved make conforming to latest relevant BIS Code 8034:1976. The pump should be fitted with bronze impeller or suitable alloys suitable for handling Clear water having greased packed bearings and shaft with wound stator on motor side and with soft protection sleeve on pump side ensuring better life for shaft coupled to a submersible squirrel cage electric induction motor (water proof type) of required HP & 2900/1450 rpm of reputed make conforming to BIS 9283-1979 latest with upto date amendments, totally dust and water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber and grease packed lubricated bearings and provided with stainless steel thrust bearing to with stand non vertical loads with minimum wear and tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guards, erection clamps, cable clips, depth gauge of approved class etc. The work should be completed to the entire satisfaction of the Engineer-in Charge. The HP are indicative, the design/drawings of Pumping Machinery is to be got approved by L-1 Contractor from the competent authority before placing supply order for the same after finalisation of tender The rates shall be for complete Job to run the machinery in proper working. The pumping machinery & its accessories etc should meet with the following requirements.

2 sets (1working & 2nd set as stand by) for duty condition discharge of = 5.65 LPS Head = 30.00 Mtr

The BHP is to be offered by the bidder and rate shall be filled in by the contractor per set.

1 No. panel (Suitable for above P/M of LWSS Landewal Kalyanpur

Supply and erection of submersible pumping machinery with allied accessories of LWSS Plankwala)

Supply and errection of star rated enrgy efficient Submersible pumping set of KSB/ Calama/ WPIL/ Crompton/ BS/ SABAR/ Oswall Kirloskar or any other approved make conforming to latest relevant BIS Code 8034:1976. The pump should be fitted with bronze impeller or suitable alloys suitable for handling Clear water having greased packed bearings and shaft with wound stator on motor side and with soft protection sleeve on pump side ensuring better life for shaft coupled to a submersible squirrel cage electric induction motor (water proof type) of required HP & 2900/1450 rpm of reputed make conforming to BIS 9283-1979 latest with upto date amendments, totally dust and water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber and grease packed lubricated bearings and provided with stainless steel thrust bearing to with stand non vertical loads with minimum wear and tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guards, erection clamps, cable clips, depth gauge of approved class etc. The work should be completed to the entire satisfaction of the Engineer-in Charge. The HP are indicative, the design/drawings of Pumping Machinery is to be got approved by L-1 Contractor from the competent authority before placing supply order for the same after finalisation of tender The rates shall be for complete Job to run the machinery in proper working. The pumping machinery & its accessories etc should meet with the following requirements.

2 sets (1working & 2nd set as stand by) for duty condition discharge of = 13.00 LPS Head = 85.00 Mtr

The BHP is to be offered by the bidder and rate shall be filled in by the contractor per set.

1 No. panel (Suitable for above P/M of LWSS Plankwala

Supply and erection of submersible pumping machinery with allied accessories of LWSS Kunjhal)

Supply and errection of star rated enrgy efficient Submersible pumping set of KSB/ Calama/ WPIL/ Crompton/ BS/ SABAR/ Oswall Kirloskar or any other approved make conforming to latest relevant BIS Code 8034:1976. The pump should be fitted with bronze impeller or suitable alloys suitable for handling Clear water having greased packed bearings and shaft with wound stator on motor side and with soft protection sleeve on pump side ensuring better life for shaft coupled to a submersible squirrel cage electric induction motor (water proof type) of required HP & 2900/1450 rpm of reputed make conforming to BIS 9283-1979 latest with upto date amendments, totally dust and water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber and grease packed lubricated bearings and provided with stainless steel thrust bearing to with stand non vertical loads with minimum wear and tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guards, erection clamps, cable clips, depth gauge of approved class etc. The work should be completed to the entire satisfaction of the Engineer-in Charge. The HP are indicative, the design/drawings of Pumping Machinery is to be got approved by L-1 Contractor from the competent authority before placing supply order for the same after finalisation of tender The rates shall be for complete Job to run the machinery in proper working. The pumping machinery & its accessories etc should meet with the following requirements.

2 sets (1working & 2nd set as stand by) for duty condition discharge of = 3.13 LPS Head = 47.82 Mtr

The BHP is to be offered by the bidder and rate shall be filled in by the contractor per set.

1 No. panel (Suitable for above P/M of LWSS Kunjhal

Supply and erection of submersible pumping machinery with allied accessories of LWSS Kulhariwala

Supply and errection of star rated enrgy efficient Submersible pumping set of KSB/ Calama/ WPIL/ Crompton/ BS/ SABAR/ Oswall Kirloskar or any other approved make conforming to latest relevant BIS Code 8034:1976. The pump should be fitted with bronze impeller or suitable alloys suitable for handling Clear water having greased packed bearings and shaft with wound stator on motor side and with soft protection sleeve on pump side ensuring better life for shaft coupled to a submersible squirrel cage electric induction motor (water proof type) of required HP & 2900/1450 rpm of reputed make conforming to BIS 9283-1979 latest with upto date amendments, totally dust and water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber and grease packed lubricated bearings and provided with stainless steel thrust bearing to with stand non vertical loads with minimum wear and tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guards, erection clamps, cable clips, depth gauge of approved class etc. The work should be completed to the entire satisfaction of the Engineer-in Charge. The HP are indicative, the design/drawings of Pumping Machinery is to be got approved by L-1 Contractor from the competent authority before placing supply order for the same after finalisation of tender The rates shall be for complete Job to run the machinery in proper working. The pumping machinery & its accessories etc should meet with the following requirements.

2 sets (1working & 2nd set as stand by) for duty condition discharge of = 13.00 LPS Head = 90.00 Mtr

The BHP is to be offered by the bidder and rate shall be filled in by the contractor per set.

1 No. panel (Suitable for above P/M of LWSS Kulhariwala

Supply and erection of submersible pumping machinery with allied accessories of LWSS Kuranwala

Supply and errection of star rated enrgy efficient Submersible pumping set of KSB/ Calama/ WPIL/ Crompton/ BS/ SABAR/ Oswall Kirloskar or any other approved make conforming to latest relevant BIS Code 8034:1976. The pump should be fitted with bronze impeller or suitable alloys suitable for handling Clear water having greased packed bearings and shaft with wound stator on motor side and with soft protection sleeve on pump side ensuring better life for shaft coupled to a submersible squirrel cage electric induction motor (water proof type) of required HP & 2900/1450 rpm of reputed make conforming to BIS 9283-1979 latest with upto date amendments, totally dust and water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber and grease packed lubricated bearings and provided with stainless steel thrust bearing to with stand non vertical loads with minimum wear and tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guards, erection clamps, cable clips, depth gauge of approved class etc. The work should be completed to the entire satisfaction of the Engineer-in Charge. The HP are indicative, the design/drawings of Pumping Machinery is to be got approved by L-1 Contractor from the competent authority before placing supply order for the same after finalisation of tender The rates shall be for complete Job to run the machinery in proper working. The pumping machinery & its accessories etc should meet with the following requirements.

2 sets (1working & 2nd set as stand by) for duty condition discharge of = 8.50 LPS Head = 70.00 Mtr

The BHP is to be offered by the bidder and rate shall be filled in by the contractor per set.

1 No. panel (Suitable for above P/M of LWSS Kuranwala

Supply and erection of submersible pumping machinery with allied accessories of LWSS Kotian Mandhala

Supply and errection of star rated enrgy efficient Submersible pumping set of KSB/ Calama/ WPIL/ Crompton/ BS/ SABAR/ Oswall Kirloskar or any other approved make conforming to latest relevant BIS Code 8034:1976. The pump should be fitted with bronze impeller or suitable alloys suitable for handling Clear water having greased packed bearings and shaft with wound stator on motor side and with soft protection sleeve on pump side ensuring better life for shaft coupled to a submersible squirrel cage electric induction motor (water proof type) of required HP & 2900/1450 rpm of reputed make conforming to BIS 9283-1979 latest with upto date amendments, totally dust and water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber and grease packed lubricated bearings and provided with stainless steel thrust bearing to with stand non vertical loads with minimum wear and tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guards, erection clamps, cable clips, depth gauge of approved class etc. The work should be completed to the entire satisfaction of the Engineer-in Charge. The HP are indicative, the design/drawings of Pumping Machinery is to be got approved by L-1 Contractor from the competent authority before placing supply order for the same after finalisation of tender The rates shall be for complete Job to run the machinery in proper working. The pumping machinery & its accessories etc should meet with the following requirements.

2 sets (1working & 2nd set as stand by) for duty condition discharge of = 16.00 LPS Head = 135.00 Mtr

The BHP is to be offered by the bidder and rate shall be filled in by the contractor per set.

1 No. panel (Suitable for above P/M of LWSS Mandala

Supply and erection of submersible pumping machinery with allied accessories of LWSS Kotian Harizan Basti

Supply and errection of star rated enrgy efficient Submersible pumping set of KSB/ Calama/ WPIL/ Crompton/ BS/ SABAR/ Oswall Kirloskar or any other approved make conforming to latest relevant BIS Code 8034:1976. The pump should be fitted with bronze impeller or suitable alloys suitable for handling Clear water having greased packed bearings and shaft with wound stator on motor side and with soft protection sleeve on pump side ensuring better life for shaft coupled to a submersible squirrel cage electric induction motor (water proof type) of required HP & 2900/1450 rpm of reputed make conforming to BIS 9283-1979 latest with upto date amendments, totally dust and water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber and grease packed lubricated bearings and provided with stainless steel thrust bearing to with stand non vertical loads with minimum wear and tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guards, erection clamps, cable clips, depth gauge of approved class etc. The work should be completed to the entire satisfaction of the Engineer-in Charge. The HP are indicative, the design/drawings of Pumping Machinery is to be got approved by L-1 Contractor from the competent authority before placing supply order for the same after finalisation of tender The rates shall be for complete Job to run the machinery in proper working. The pumping machinery & its accessories etc should meet with the following requirements.

2 sets (1working& 2nd set as stand by) for duty condition discharge of = 17.00 LPS Head = 135.00 Mtr

The BHP is to be offered by the bidder and rate shall be filled in by the contractor per set.

1 No. panel (Suitable for above P/M of Kotian Harizan Basti

Supply and erection of Centrifugal pumping machinery with allied accessories of LWSS Bhatoli Kalan Khurd

PUMPING MACHINERY CENTRIFUGAL:- Supply ,Installation ,Testing & Commissioning of star rated energy efficient horizontal spindle, horizontal/ radial split casing/end suctions (back pull out arrangement)single/ double/ multistage centrifugal pump suitable for operation, in parallel of recommended make such as Mather and platt/ KSB/Kirloskar/Jyoti /Beaconweir BS&BE or any other approved make confirming to BIS-1520-1980 with upto date ammendments, read with IS:9137-1978 or latest edition suitable for lifting clear water for under mentioned characteristics with bronze/Bronze with 2.5% Nickel impellers, dia of 405 mm priming funnels, casing ring and shaft sleeves of bronze/ steel, shaft of SS:410/AIS 1431 Chrom in plated with cast iron casing coupled directly through a flexible coupling on a Common MS base plate to squirrel cage screen protected drip proof induction motor/TEFC/CACA of standard make such as Kirloskar/BHEL/ Crompton/NGEF/GEC/ Siemens / Jyoti/Area Brown Boven (ABB)/CGL and suitable for operation on 11 KV HT, 50 cycles/second 3 phase AC electric supply. The power of electric motor/motors should be at least (+) 10% in excess of the maximum power required by the pump / pumps in the operation range of (+) 10% and (-) 15% of the duty point head. The motor/ motors should be as per IS: 325-1978 with upto date amendments read with IS:900-1972. The starting current of the motor shall be limited to not more than 4.5 to 5 times of full load current. It should include cost of bearing nuts, bolts and painting etc and should meet the following requirement including Pump sets (working + standby), , the design/drawings of Pumping Machinery is to be got approved by L-1 Contractor from the competent authority before placing supply order for the same after finalisation of tender. The rates shall be for complete Job to run the machinery in proper working. The pump set should include Base plate, water level guards, erection clamps, cable clips, depth gauge of approved class etc. The work should be completed to the entire satisfaction of the Engineer-in Charge. The HP are indicative, the design/drawings of Pumping Machinery is to be got approved by L-1 Contractor from the competent authority before placing supply order for the same after finalisation of tender The rates shall be for complete Job to run the machinery in proper working. The pumping machinery & its accessories etc should meet with the following requirements.

1 set of duty condition discharge of = 3.10 LPS Head = 209.17 Mtr

The BHP is to be offered by the bidder and rate shall be filled in by the contractor per set.

1 No. panel (Suitable for above P/M of LWSS Bhatoli Kalan Khurd

Supply and erection of Centrifugal pumping machinery with allied accessories of LWSS Barotiwala)

PUMPING MACHINERY CENTRIFUGAL:- Supply ,Installation ,Testing & Commissioning of star rated energy efficient horizontal spindle, horizontal/ radial split casing/end suctions (back pull out arrangement)single/ double/ multistage centrifugal pump suitable for operation, in parallel of recommended make such as Mather and platt/ KSB/Kirloskar/Jyoti /Beaconweir BS&BE or any other approved make confirming to BIS-1520-1980 with upto date ammendments, read with IS:9137-1978 or latest edition suitable for lifting clear water for under mentioned characteristics with bronze/Bronze with 2.5% Nickel impellers, dia of 405 mm priming funnels, casing ring and shaft sleeves of bronze/ steel, shaft of SS:410/AIS 1431 Chrom in plated with cast iron casing coupled directly through a flexible coupling on a Common MS base plate to squirrel cage screen protected drip proof induction motor/TEFC/CACA of standard make such as Kirloskar/BHEL/ Crompton/NGEF/GEC/ Siemens / Jyoti/Area Brown Boven (ABB)/CGL and suitable for operation on 11 KV HT, 50 cycles/second 3 phase AC electric supply. The power of electric motor/motors should be at least (+) 10% in excess of the maximum power required by the pump / pumps in the operation range of (+) 10% and (-) 15% of the duty point head. The motor/ motors should be as per IS: 325-1978 with upto date amendments read with IS:900-1972. The starting current of the motor shall be limited to not more than 4.5 to 5 times of full load current. It should include cost of bearing nuts, bolts and painting etc and should meet the following requirement including Pump sets (working + standby), , the design/drawings of Pumping Machinery is to be got approved by L-1 Contractor from the competent authority before placing supply order for the same after finalisation of tender. The rates shall be for complete Job to run the machinery in proper working. The pump set should include Base plate, water level guards, erection clamps, cable clips, depth gauge of approved class etc. The work should be completed to the entire satisfaction of the Engineer-in Charge. The HP are indicative, the design/drawings of Pumping Machinery is to be got approved by L-1 Contractor from the competent authority before placing supply order for the same after finalisation of tender The rates shall be for complete Job to run the machinery in proper working. The pumping machinery & its accessories etc should meet with the followingrequirements.

1 set of duty condition discharge of = 8.00 LPS Head = 150.00 Mtr

The BHP is to be offered by the bidder and rate shall be filled in by the contractor per set.

1 No. panel (Suitable for above P/M of LWSS Barotiwala).

SS ENGINEERING WORKS

GREWALSUBMERSIBLE AND ELECTRICAL SERVICE

JAGDEEP THAKUR

Vijay Kumar C/O Vasudeva Electricals

Surjeet Singh Thakur