Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.8 Cr
EMD Value
₹1.8 L
Closing Date
23 Feb 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Construction of 24x7 PHC Building at Marthapur under National Health Mission in the Dhenkanal district of Odisha (Scope of work in addition to above is uploaded separately along with this NIT)
NBCC/ODISHA/ZO/NHM/NIT/22-23/016
NBCC/ODISHA/ZO/NHM/NIT/22-23/016
Open Tender-Domestic
Civil Works General
Dhenkanal, Odisha
₹11,800
₹1.8 L
23 Feb 2023
8 Feb 2023
23 Feb 2023
23 Feb 2023
9 Mar 2023
Head Description of Item Unit Qnty. Rate Amount
Cleaning & grubbing road land including uprooting
rankvegetation,grass ,bushes, shurbes,sapling and trees girth
upto 300mm ,removal of stumps of trees cut earier and disposal
of unsevicable materials and stacking of servicable materials to
be used or auctioned up to lead of 1000 meters including
removal and disposal of top organic soil not exceeding 150mm
Earth work in all kinds of soil within 50m lead and 1.5m lift
including rough dressing and breaking clods to maximum 5cm.
To 7cm. And laying in layers not exceeding 0.3m in depth and as
per specification complete.
Cutting in disintegrated rock not requiring blasting to be removed
by pick axes and crow bars and depositing materials within 50m
initial lead and 1.5m initial lift including rough dressing as per
5 2 direction and specification of the department including stacking Cum 174.97 497.48 87043.41
the useful materials separately as ordered.
Filling in foundation, trenches and plinth with river sand, well
watered and compacted in layers of 0.3 mtr, with top surface
dressed and leveled to proper gradient including cost of all
materials, conveyance, all taxes and royalties, loading and
unloading, including cost of all labour, sundries, T & P etc. All
complete as per directions of the Engineer -in-charge.
Providing and laying plain cement concrete of proportion (1:3:6)
in foundation and floors using 4 cm. size black hard crusher
broken granite stone metal and screened and washed sharp
sand for mortar of approved quality and from approved quarry
including hoisting, lowering, laying concrete, ramming, watering
7 4 and curing etc. complete to required levels laid in layers not Cum 85.66 5485.23 469864.80
exceeding 15 cm. thick in each layer including cost, conveyance,
royalties of all materials and cost of all labours,labour cess, T&P
etc complete as per the direction of the Engineer-in-charge.
Filling available excavated earth (excluding rock) in trenches
plinth sides of foundation etc. in layers not exceeding 20 cm in
depth , consolidating each deposited layers by ramming and
8 4 watering, lead up to 50m and lift up to 1.5 mt etc. including cost Cum 100.94 130.86 13209.21
of all labour, sundries T & P etc complete in all respect as per the
direction of Engineer-In-Charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying diluting and preparing chemical emulsion like
imidacloprid 30.5% SC or other chemicals approved by central
insecticides Board or as directed by the manufacturer and
spraying the mixture uniformly by sprayer as per- constructional
Anti-termite Treatment confirming to IS 6313 (PART-II) and
creating a chemical barrier under and around the column pits,
wall tranches, basement excavation top surface of plinth filling
juction of wall and floors along with external perimeter of the
building expansion joints. surrounding the pipes and conduits etc.
9 5 at the rate of 7.5liter per sqm on vertical surface and 5.0 liter per sqm 660.00 123.31 81384.60
sqm on horizontal surfaces, 50% of the emulsion to be filled in
the holes made in trenches at 150mm center to center (or as
directed by the manufacturer) including the cost of all materials.
cost of all labour, conveyance, loading, unloading, T&P, Etc. all
complete as per the direction of Engineer-in-Charge.
RCC work M-25 grade as per approved designs and drawings
having a minimum compressive strength (in work test) 25 N. /
Square mm. in 15 cm. cubes at 28 days after mixing and test
conducted in accordance with I.S. 456 and I.S. 516 using 12
mm. to 20 mm. size black hard crusher broken granite stone
chips and screened and washed sharp sand for mortar of
approved quality from approved quarry, washed and cleaned (20
mm. size chips not to exceed 25 % ) to be mixed in concrete
mixture with approved grade cement including hoisting, lowering,
laying and compacting concrete by using vibrators, watering and
10 6 curing for 28 days and finishing the exposed surface smooth 0 0.00 0.00 0.00
providing grooves or beads wherever necessary including cost,
conveyance, loading, unloading, royalties and taxes of all
materials and cost of all labours, sundries, T&P, required for the
work etc. complete including cost of centering & shuttering as
per direction of the Engineer in charge.
11 0 Foundation and plinth 0 0.00 0.00 0.00
13 0 Column / Pedestal Cum 6.30 6418.61 40437.24
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying Cutting, straightening coiled or bent up M.S. Rod or tor
steel of primary steel producers such as SAIL / Tiscon / RINL /
JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including
bending, binding, welding and jointing if necessary and tying the
grills and placing in position as required for R.C.C. Work and for
providing fan hooks as required, hoisting, lowering, laying
including cost, conveyances, taxes of M.S. Rod or tor steel and
28 7 binding wires of 18 to 20 gauge and labour required for the work 0 0.00 0.00 0.00
for bending, binding and tying the grills in all floors with labour
cess etc. (payment will be made on standard weight of B.I.S. for
M.S. Rods or tor steel only) etc. complete as per specification &
direction of Engineer-in-charge.
29 0 Foundation and plinth qtl 142.67 10309.19 1470811.85
Fly Ash brick masonry in cement mortar (1:6) in super structure
using Fly Ash bricks of 20 x 10 x 8 cm size having a crushing
strength of not less than 75 kg./sqcm with dimensional tolerance
± 2% including splays cutting circular moulding chamfering and
corbelling and similar such type of works with all necessary
projections watering and curing after immersing the bricks in
32 8 water at least for six hours before use including cost, 0 0.00 0.00 0.00
conveyance, royalties and taxes of all materials with all
labour,labour cess and T & P required for the work complete in
all respect as per direction of Engineer-in-Charge.
Providing Fly ash bricks masonry work using
(250mmx125mmx80mm size) having crushing strength not
less than 75Kg/Sqcm in cement mortar (1:4). Immersing the
bricks in water before use in all necessary projection splays
cutting, circular moulding, corbelling etc. Including cost of
35 9 conveyance ,taxes & royalties, loading and unloading of all 0 0.00 0.00 0.00
materials & cost of all labour, scaffolding ,watering & curing
,sundries, T & P etc. complete as per the direction of Engineer-in-
Providing 16 mm thick cement plaster with cement mortar of mix
(1:6) with screened and washed sharp sand for mortar and
finished smooth to the rough surface of walls in all heights after
racking out joints including watering and curing, rounding of
corners, providing grooves where ever necessary with cost,
37 10 conveyance, royalties of all materials with cost of all 0 0.00 0.00 0.00
labour,labour cess, T&P, and scaffolding required for the work
etc. complete in all respect as directed by the Engineer in charge.
Providing 12 mm thick cement plaster with cement mortar of mix
(1:6) with screened and washed sharp sand for mortar and
finished smooth to the rough surface of walls in all heights after
racking out joints including watering and curing, rounding of
corners, providing grooves where ever necessary with cost,
40 11 conveyance, royalties of all materials with cost of all 0 0.00 0.00 0.00
labour,labour cess, T&P, and scaffolding required for the work
etc. complete in all respect as directed by the Engineer in charge.
42 0 Terrace Floor sqm 46.98 174.05 8176.87
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing 6 mm thick cement plaster with cement mortar of mix
(1:4) with screened and washed sharp sand for mortar and
finished smooth to R.C.C. work after closed deep chipping &
slurry treatment including watering and curing, rounding of
43 12 corners, providing grooves where ever necessary with cost, 0 0.00 0.00 0.00
conveyance, royalties of all materials with cost of all labour, T&P,
and scaffolding required for the work etc. complete in all respect
as directed by the Engineer in charge.
45 0 Terrace Floor sqm 21.00 195.76 4111.00
Providing 2.5cm thick Grading Concrete over roof slab with
cement concrete (1:2:2) using 6mm size black hard granite
crusher broken chips and screened & washed sharp sand for
mortar and finished smooth to the rough surface of slab
46 13 including watering and curing with cost, conveyance, royalties of 0 0.00 0.00 0.00
all materials with cost of all labour, labour cess and T&P required
for the work etc. complete in all respect as directed by the
Engineer in charge.
Supplying, fitting and fixing Vetrified tiles of premium grade
having thickness 8mm to 10mm confirming to IS 13756 of size
600mm x 600mm plain (Ivory) stain free & Germs free of
approved make (JOHNSON /OASIS / SOMANY/ KAJARIA or
equivalent ) in floors on 20mm thick bed of C.M. (1:4)
48 14 (1cement:4course sand) and filling the joint with white cement 0 0.00 0.00 0.00
mixed with pigment to match the shades of the tileincluding cost
of all materials, labour, labour cess, T&P etc. required for the
work complete in all respect as directed by the Engineer in
Providing, fitting, fixing Vitrified tiles of premium grade having
thickness 8mm to 10mm confirming to IS 13756 of size 600mm
x 600mm plain (Ivory) of approved make (JOHNSON /OASIS /
SOMANY/ KAJARIA or equivalent ) as directed by Engineer-in-
charge in dados skirting and risers of steps on 12mm thick
50 15 cement plaster (1:3) jointed with neat cement slurry mixed with 0 0.00 0.00 0.00
pigment to match the shades of the tiles including rubbing and
polishing etc. complete with cost, conveyance, royalties of all
materials all labour,labour cess complete in all respects.
Fixing granite tiles of approved dimension area above 0.4 sqm
(20mm thick) in floor, treads of steps and landing on 20mm thick
bed of cement mortar (1:4) jointed with neat cement slurry mixed
with pigment to match the shades of the tiles including rubbing
52 16 and polishing etc. complete with cost, conveyance, royalties of all 0 0.00 0.00 0.00
materials complete in all respects as per direction of Engineer-in-
Fixing granite tiles of approved dimension area above 0.4 sqm
(20mm thick) in Dados, treads of steps and landing on 12mm
thick cement mortar (1:3) jointed with neat cement slurry mixed
with pigment to match the shades of the tiles including rubbing
54 17 and polishing etc. complete with cost, conveyance, royalties and 0 0.00 0.00 0.00
taxes of all materials complete in all respects as per direction of
Engineer-in-Charge.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and providing and fixing
ceramic tiles in floors, treads or steps and landing on 25mm
thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed
with neat cement slurry mixed with pigment to match the shades
of the tiles including watering, curing,cost of all materials,
56 18 conveyance of all materials to work site , payment of royalty, all 0 0.00 0.00 0.00
taxes etc all complete as per P.W.D specification and direction of
Engineer-in-charge (Antiskid Tile flooring size 30cmx30cm
approved by the Engineer-in-charge )
Supplying all materials, labaour, T&P and fixing ceramic glazed
tiles in dados skirting on 12mm thick cement plaster (1:3) joined
with neat cement slurry mixed ith pigments to match the shades
of the tiles etc. complete as per direction of the Engineer-in-
charge.(ceramic vitrified Glazed tiles in wall of size 450x300 ) of
58 19 make Kajaria/Somany/Johnson/Orient Bell/Rak) plain/printed 0 0.00 0.00 0.00
series to be pre-approved by the Engineer-in-charge. in Ground
Floor(Kajaria-Durenmarfil or equivalent make)
Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride
(UPVC) (FENESTA/NCL VEKA LTD.) Casenent Door-60-Series
duly manufactured using UPVC reinforced profiles of 60mm x
55mm x 2.5mm for outer frames 102mm x 60mm x 2.5mm
casement Door Sash profile and 74mm x 60mm x 2.5mm
mullion peofile capable of mounting single glazing system,
structurally reinforced with hot dip galvanised up to 50 microns of
minimum thickness of 2.0 mm prefabricated & welded through
fusion welding the door sash shall be fitted with 12mm thick
WPC Board of Greenply make duly fixed with EPDM weathering
seal resistant accessories like clipping locking system made of
60 20 aluminium 1 No. per set of sashes and th esystem isto be 0 0.00 0.00 0.00
installed at the site using anchor fasteners, silicon rubber
sealant,easy glazing/deglazing at site etc. including cost and
conveyance of all material, accessories, labour charges,
materials and product conforming to ASTM D 638-14,EN-447-95
and other applicable codes and standards. (Ref.-Office of the
Engineer-In-Chife (CIVIL), Odisha Nirman
Soudha,Bhubaneswar. Lt. No-16100)
Factory made single leaf Solid WPC (Wood polymer) composite
door shutter of 25mm thickcompacted with wood grain finish
structural foam panel of 29mm thickness and a density of
20kg/cu.mtr shall be used as core material for fitting the metal
fittings such as tower bolts, aldrops, handles etc shall be
provided. A structural adhesive compatible with (EPS) foam shall
be used for bending the core material, The material and process
for manufacturing the door shutters shall conform to RV-TIFAC
composites Design Centre's standards and specifications and
62 21 the door shutters Conforming to relevant I.S.specification. The 0 0.00 0.00 0.00
finish of door shutter will be plain colour white/ Ivory/ Beige/ Light
grey/ Mahogany/ Teak wood or any other colour using high
quality pigments. Three heavy whight mild steel butt hinges type-
I(ISI marked) size 100mm are to be fitted on one side of shutter.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Factory made Solid WPC door frame of size 95mmx55mm
fabricated .The door frame consist of four segments which are
provided with plug-in-socket arrangement in-situ in the mould.
The segments are plugged in and are joined together by means
of screw. The WPC frame shall be provided with The material
and process for manufacturing the door frames shall conform to
Relavent I.S.specification. The finish of door frame will be plain
64 22 colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ 0 0.00 0.00 0.00
Teak wood/sand stone/Champagne/Pastel blue or any other
colour using high quality pigments complete in all respect as per
specification and direction of the Engineer in charge
Providing and fixing 1mm thick M.S. sheet door with frame of
40x40x6 mm angle iron and 3 mm M.S. gusset plates at the
junctions and corners, all necessary fittings complete, including
applying a priming coat of approved steel primer.Using M.S.
angels 40x40x6 mm for diagonal braces
67 0 Terrace Floor sqm 1.00 5225.22 5225.22
Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride
(UPVC) (FENESTA/NCL VEKA LTD.) Three Track -Three Panel
sliding window-60-Series duly manufactured using UPVC
reinforced profiles of 108mm x 45mm x 2.5mm for outer frames
and window sash of 39mm x 58mm x 2.5mm capable of
mounting single glazing system, structurally reinforced with hot
dip galvanised up to 50 microns of minimum thickness of 1.5
mm prefabricated & welded through fusion welding the window
frame sash shall be fitted with 6mm thick clear glass os SAINT-
68 24 GOBAIN make duly fixed with EPDM weathering seal resistant 0 0.00 0.00 0.00
and the system is to be installed using Reinforced large coupler
at the site using anchor fasteners, silicon rubber sealant,easy
glazing/deglazing at site etc. including cost and conveyance of all
material, accessories, labour charges, materials and product
conforming to ASTM D 638-14,EN-447-95 and other applicable
codes and standards.
Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride
(UPVC) (FENESTA/NCL VEKA LTD.) Ventilators Top Hung-60-
Series duly manufactured using UPVC reinforced profiles of
60mm x 50mm x 2.5mm for outer frames, 75mm for outer
frames. 75mm x 60mm x 2.5mm for casement window sash
profile capable of mounting single glazing system, structurally
reinforced with hhot dip galvanised up to 50 microns of minimum
thickness of 1.5 mm prefabricated & welded through fusion
welding the window sash shall be fitted with EPDM weathering
71 25 seal resistant accessories like clipping locking system made of 0 0.00 0.00 0.00
aluminium 1 No. per set of sashes and th esystem isto be
installed at the site using anchor fasteners, silicon rubber
sealant,easy glazing/deglazing at site etc. including cost and
conveyance of all material, accessories, labour charges,
materials and product conforming to ASTM D 638-14,EN-447-95
and other applicable codes and standards.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying, fitting & fixing in all floors of M.S. grills, grill gates,
M.S. gates, garage door, collapsible gates with top and bottom
rails, steel windows, critical frames for windows, stair case and
parapet railing made out of M.S Square bar/ flat including stair
case hand railing with 40mm. dia G.I.pipe etc. including painting
73 26 two coats over a coat of redoxide primer as per approved drawing 0 0.00 0.00 0.00
and design with cost of all materials & labour, labour cess, T&P,
sundries etc. complete in all respect as per specification &
direction of the Engineer-in-Charge.
Supplying, fitting and fixing of Stainless steel of 304 grade in
hand railing using 50mm dia of 2mm thick circular pipe with
Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and
stainless square pipe bracing of size 32mm x 32mm x 2mm in 3
76 27 rows in stair case as per approved design and specification, 0 0.00 0.00 0.00
buffing, polishing etc with cost, conveyance, taxes of all
materials, cost of all labour,labour cess, T&P etc. required for the
work complete in all respect as per direction of the Engineer-in-
Painting two coats to new Iron work with approved enamel paints
of approved colour, shade over a coat of primer including sand
papering, polishing the surface, cost, conveyances, taxes of all
78 28 materials and cost of all labour,labour cess with T&P etc, 0 0.00 0.00 0.00
complete as per specification & direction of Engineer-in-charge.
80 0 Terrace Floor sqm 1.80 76.82 138.27
Painting two coat with approved synthetic enamel paint to new
wood over a coat of Red oxide primer including cost,
conveyances, royalties, taxes of all materials and cost of all
labour with T&P required for the work etc. complete as per
specification & direction of Engineer in charge.
83 0 Terrace Floor sqm 1.80 180.78 325.40
Wall painting two coats with Weather coat paint (1st quality)
exterior grade of approved make & approved shade over a coat of
primer to make an even finished surface in all floors and heights
with all scaffolding and staging charges including cost,
84 30 conveyance, cost of all labours, T & P, sundries etc. as required 0 0.00 0.00 0.00
for the work complete in all respect as per the direction of the
Engineer-in-Charge.
86 0 Terrace Floor sqm 313.38 94.16 29509.11
Priming one coat with wall cement primer (water bound) to make
an even finished surface in all floors and heights to wall surface
of approved make and shade including sand papering, applying
putty wherever necessary & cost of scaffolding, staging charges
with cost, conveyance, cost of all labour,labour cess T&P etc.
complete as per the direction of the Engineer-in-charge.
89 0 Terrace Floor sqm 67.98 75.87 5157.91
Finishing plastered surfaces of walls with cement based wall
putty (Water based) of approved make and finishing the surface
smooth and even by sand papering to receive painting in walls, at
all heights with staging wherever necessary with cost,
conveyance, cost of all labour,labourcess, all T&P etc. required
for the work complete in all respect as per the direction of the
Engineer-in-charge.
92 0 Terrace Floor sqm 67.98 87.91 5976.12
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Painting two coats with plastic emulsion paint over a coat of
water bond cement primer to make an even finished surface in
all floors and heights to wall surface of approved make and
shade including sand papering, applying putty wherever
93 33 necessary & cost of scaffolding, staging charges with cost, 0 0.00 0.00 0.00
conveyance, cost of all labour,labour cess, T&P etc. complete as
per the direction of the Engineer-in-charge.
95 0 Terrace Floor sqm 67.98 88.38 6008.21
96 0 Sub-Total of Civil Works 0 0.00 0.00 13137463.53
97 0 Plumbing Works 0 0.00 0.00 0.00
Supplying all materials, labour, T&P and providing and fixing to
wall or ceiling and floor C-PVC pipes conforming to pipe fittings
of the following nominal bore with clamps including making good
the wall, ceiling and floor all complete as per specification and
direction of the Engineer in charge
20mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)
25mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)
40mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)
103 (iv) 50mm dia C-PVC pipe (Ashirbad/Supreme/Truflow) Mtr 40.00 1233.81 49,352.32
40mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)(For Ring)
50mm dia C-PVC pipe (Ashirbad/Supreme/Truflow)(For Ring)
Providing all materials, labour, T&P for fitting and fixing of UPVC
SWR pipes (Type-B) confirming to IS-13592/1992 with latest
revision & ISI mark both below & above ground level or fixing on
wall surface upto 3rd floor roof including scaffolding wherever
107 2 necessary with requisite testing. The cost inclusive of all taxes, 0 0.00 0.00 0.00
transportation, loading & unloading etc. all complete as per
specification & direction of the Engineer-in-charge. Make :
(Ashirbad/Supreme/Truflow)
110mm dia U-PVC pipe (Ashirbad/Supreme/Truflow)
110mm dia U-PVC pipe (Ashirbad/Supreme/Truflow)
Supplying all materials, labour, T&P and cutting holes through
existing brick work including making good the damages in
cement mortar (1:4) for taking PVC pipes and fittings etc all
complete as per PH specification and direction of the Engineer in
113 (i) Ground Floor Each 8.00 53.93 431.41
Supplying all materials, labour, T&P and cutting hole in R.C.C
floors, roofs, etc upto 19 cm thick for passing P.V.C pipes and
fittings etc and repairing the holes after insertion of pipes etc
114 4 with cement concrete (1:2:4) including finishing complete so as 0 0.00 0.00 0.00
to make it leak proof as per direction of the Engineer in charge.
115 (i) Ground Floor Each 4.00 186.32 745.29
Supplying all materials, labour, T&P and cutting grooves in
pucca floors and walls for taking PVC pipes and making good the
116 5 damages as per the direction of the Engineer in charge. 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and fitting and fixing
brass/CP fittings of the following nominal bore with supply of all
118 6 jointing materials complete as per specification and direction of 0 0.00 0.00 0.00
the Engineer in charge
15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make)
15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
15mm dia CP Bib cock (Con-CHR-047KN Jaquar make)
15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar
15mm dia CP Health faucet (Con-ALD-CHR-573 Jaquar make)
15mm CP revolving shower (Jaquar) CON-CHR-1989
126 (i) Waste Discharge Pipe Each 18.00 165.20 2,973.60
127 (j) 125mm dia CP gratings Each 19.00 98.53 1,872.07
128 (k) 15mm dia CP extension piece Each 40.00 69.97 2,798.96
129 (l) 25mm dia G.M or Brass F.W valve (Sakti make) Each 15.00 1094.21 16,413.21
130 (m) 50mm dia G.M or Brass F.W valve (Sakti make) Each 10.00 3012.78 30,127.76
131 (n) PVC CONNECTION PIPE Each 28.00 173.46 4,856.88
BOTTLE TRAP (WITH INTERNAL PARTITION)
32mm SIZE WITH 300mm & 190mm LONG
WALL CONNECTION PIPES & WALL FLANGE(ALD-CHR-
133 (p) Coat Hook (ACN-CHR-1161N) Each 6.00 550.00 3,299.99
134 (q) Elbow action Bib cock(Jaquar)FLR-5033B Each 7.00 4956.00 34,692.00
Supplying all materials, labour, T&P and fitting and fixing 10 litres
capacity low level flushing cistern with a pair of cast iron or M.S
brackets complete with fittings such as siphonic arrangements
15mm nominal size brass/pvc ball valve with polythene float CP
brass handle, unions and couplings for connection with inlet,
outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc
135 7 inlet connection pipe including cutting holes and making good the 0 0.00 0.00 0.00
same and connecting the flush bend with cistern and closet and
connecting the inlet pipe with supply main etc all complete as per
specification and direction of the Engineer in charge
136 0 10 litres PVC L.L. Cistern (Slimline-white) Each 8.00 1768.35 14,146.78
Supplying all materials, labour, T&P and fixing vitreous china
water closet, squatting pan (Indian type W.C pan/Orissa pattern
squatting pan conforming to IS:2556-part-3-2004) duly
embedded in cement concrete (1:5:10) using 4cm size hard
granite metal including fixing a pair of vitreous china 250mm x
130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap
137 8 (with/without 50mm dia horn) for water closet squatting pan 0 0.00 0.00 0.00
including jointing the trap with pan in cement mortar (1:1),
cutting the floor and mending good the damages etc all complete
as per specification and direction of the Engineer in
charge(Nycer,parryware make)
580mm size Orissa pan(Hindware/Parryware/Jauar)
Supplying all materials, labour, T&P and fixing bowl pattern urinal
including connecting the urinal with waste pipe by means of
white lead mixed with chopped hemp etc all complete as per
specification and direction of the Engineer in charge.
URINAL WITH FIXING ACCESSORIES SET,
SIZE:385X325X635 MM(URS-WHT-13253N)
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and fixing Wash Down
Water Closet (European type W.C pan) with integral ‘S’ or ‘P’
trap to the floor with wooden plug and chromium plated screws
141 10 including jointing the trap with soil pipe in cement mortar (1:1) 0 0.00 0.00 0.00
etc all complete as per specification and direction of the Engineer
E.W.C. with seat cover (single piece)
(Parryware/Hindware/Essco)
E.W.C. with seat cover (plain)(Parryware/Hindware/Essco)
EWC(Matrix set)No.70002(P-18)/CNS-WHT-8515300 spp
Supplying all materials, labour, T&P and fixing wash basins with
hole for pillar taps conforming to IS:2556-part-4-2004 with cast
iron or M S brackets painted white including cutting holes in walls
and making good the damages with supply of wooden plugs,
screws and cement etc, fixing pedestal for wash basin recessed
at the back for the reception of pipes and fittings, fixing PVC
waste pipe of 32mm nominal diameter for wash basin including
brass check nut complete, fixing pillar taps capstan head screw
down high pressure lettered ‘Hot’ and ‘Cold’ with long screws,
145 11 shanks and back nuts of 15mm dia nominal bore(Plaza make), 0 0.00 0.00 0.00
fixing 15mm dia PVC inlet connection pipe and making
connection with pillar cocks and supply mains for wash basin,
fixing 32mm dia CP brass waste(Plaza make), etc all complete
as per specification and direction of the Engineer in charge
Under Counter basin(560x450)Hindware/Jaquar FLS-5701
Halfpedestal basin(560x450)Hindware /Jaquar CNS-801+CNS
Supplying all materials, labour, T&P and fixing mirror of superior
glass conforming to IS:3438-1996 mounted on 6mm thick A.C
sheet or plywood sheet and fixed to wooden plugs with CP
screws and washers complete as per specification an direction of
the Engineer in charge.
149 (i) 450mm x 750mm size B.E mirror Each 15.00 785.29 11,779.35
150 (ii) Large size mirror with frame Sqm 0.00 2088.95 0.00
Supplying all materials, labour, T&P and fixing standard sized CP
towel rail complete with CP brass brackets fixed to wooden plugs
151 13 with CP screws as per specification and direction of the Engineer 0 0.00 0.00 0.00
25mm x 600mm long CP towel rail(Jaquar)ACN-ACR-1111SM
153 (ii) CP towel Ring(Jaquar)ACN-ACR-1121N Each 10.00 2468.21 24,682.06
Supplying all materials, labour, T&P and fixing CP soap holder
complete with CP brass brackets fixed to wooden plugs with CP
154 14 screws as per specification and direction of the Engineer in 0 0.00 0.00 0.00
155 (i) CP soap holder (Jaquar)ACN-ACR-1131N Each 8.00 1248.56 9,988.46
SOAP DISPENSER WITH GLASS BOTTLE (Jaquar)ALD-BCH-
Supplying all materials, labour, T&P and fixing wash kitchen
sink/laboratory sink with outlet at end and weir overflow including
fitting and fixing a pair of cast iron or MS brackets painted white,
fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia
PVC waste pipe 910mm long with supply of wooden plugs,
157 15 screws and cement etc including cutting holes in walls and 0 0.00 0.00 0.00
making good the damages etc all complete as per specification
and direction of the Engineer in charge.
158 (i) Laboratory Sink 450x300x150 mm Each 9.00 2369.79 21,328.15
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
BAD PAN SINK PVC 10 LTR FLUSHING TANK P TRAP SIZE
FULL ACCESS0RIES (WITH C PVC P TRAP PIPE AND C PVC
160 (iii) HINDWARE FLUSH TANK 10 LITRE 610WX650DX805H MM Each 2.00 68440.00 1,36,880.00
Supplying all materials labour T&P and filling in foundation and
plinth with sandwell watered and rammed including conveyance
of all materials to work sitepayment of royalty taxes etc all
complete as per direction of Engineer in charge In ground floor
Supplying all materials, labour, T&P and providing cement
concrete (1:4:8) with 4cm size hard granite metal including
watering, curing, conveyance of all materials to worksite,
162 17 payment of royalty, taxes etc all complete as per specification cum 5.60 4811.69 26,945.44
and direction of the Engineer in charge In ground floor
Supplying all materials, labour, T&P and constructing Gully Trap
chamber of the following inside size with 8cm thick R.C.C
precast cover slab in cement concrete (1:2:4) mix using 12mm
size h.g chips, foundation concrete (1:4:8) using 40mm size hard
granite metal on bed and around trap, Fly ash brickwork in c.m
(1:6) in F&P and inside 12mm thick cement plastering (1:3)
163 18 finished with a floating coat of neat cement including fixing 0 0.00 0.00 0.00
100mmx100mm size HCI gully trap,150mmx150mm size C.I
grating etc all complete as per approved drawing, specification
and direction of the Engineer in charge.
Supplying all materials, labour, T&P and constructing Inspection
Chamber of the following size with cement concrete(1:3:6) using
40mm size hard granite metal on bed, 1st class Fly ash
brickwork in cement mortar(1:6),moulding and shaping the
channel inside and benching with cement concrete (1:2:4) using
12mm size h.g chips,12mmthick cement plaster (1:3) with
punning to inside, cement flush pointing (1:3) to outside, R.C.C
cover slab in (1:2:4) using 12mm size h.g chips with RCC man
165 19 hole cover, earthwork in excavation in all kinds of soil and refilling 0 0.00 0.00 0.00
the cavity around the chamber including watering, curing,
conveyance of all materials to worksite, payment of royalty, taxes
etc all complete as per approved specification and direction of the
Engineer in charge.
166 (i) Inside size 760mm x 760mm x 460mm Each 8.00 9682.14 77,457.09
167 (ii) Fitting and fixing RCPC cover slab (0.45m dia) Each 8.00 1289.86 10,318.86
168 20 Triple layer Sintex tank 2000 liter. Each 1.00 23600.00 23,600.00
169 0 EXTERNAL PH WORK 0 0.00 0.00 0.00
Supply all materials, labour, T&P and providing, fitting and fixing
of centrifugal pump set to run on 3phase/1phase line voltage
ranging from 320 volt to 450 volt with suitable control pannel,
jointing with GI/ PVC/ HDPE pipes electrification,
170 21 testing,commissioning,trial running, conveyance of all materials 0 0.00 0.00 0.00
to worksite, payment of taxes etc all complete as per
specification and direction of the Engineer in charge.
3 HP single phase Vetrical submerssible pump set.
172 (ii) Control panel Each 2.00 4490.49 8,980.98
Labour charges for lowering, testing, commissioning &
transportation to site etc.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying all materials, labour, T&P and providing and laying in
trenches PVC ASTM pipe of the following nominal bore, tube
174 22 fittings, testing all complete as per specification and direction of 0 0.00 0.00 0.00
the Engineer in charge.
Supplying all materials, labour, T&P and providing and fixing to
wall or ceiling and floor CPVC pipes of the following nominal
bore and pipe fittings with clamps including making good the wall
and testing as per specification and direction of the Engineer in
Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr
initial lift including rough dressing and breaking clods to
179 24 maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr 0 0.00 0.00 0.00
in depth and as per direction of the Engineer in charge.
Supplying all materials, labour T&P and fitting and fixing
brass/CP/PVC fittings of the following nominal bore with supply
181 25 of all joiniting materials complete as per specification and 0 0.00 0.00 0.00
direction of the Engineer in charge.
182 (i) 50mm dia Brass N. R. Valve Each 4.00 2458.53 9,834.12
183 (ii) 50mm dia Brass Check Valve Each 3.00 3147.18 9,441.53
184 (iii) 50mm dia Brass F. W. Valve Each 8.00 3012.78 24,102.21
Supplying all materials, labour, T&P and laying in trenches (to
level or slope) unplasticized PVC pipes conforming to IS:
4985/2000 of the following outside dia for class–3(0.60mpa)
including jointing with supply of approved solvent cement by non-
heat application method/as per manufacturer’s specification,
providing and laying in trench cement concrete (1:4:8) with
185 26 40mm size hard granite metal in the Type C-1 standard bedding 0 0.00 0.00 0.00
surrounding or encasing including concrete for bedding and
curing etc all complete as per PH specification and direction of
the Engineer in charge.
186 (i) 200mm dia u-pvc pipe alround concrete Mtr 150.00 2063.70 3,09,555.30
Supplying all materials, labour, T&P and providing fitting and
fixing (Aqua guard) Pure Chill 120 PSS UV of size
750x570x1350mm height with water storage capacity 120 liters
along with 3 nos of faucets 2 for cold water and 1 for normal
water including a flow of 1.5 ltr per minute etc all complete as
per approved drawing,specification and direction of the Engineer
188 0 Aquagurd Pure Chill 120 PSS UV Each 1.00 119528.10 1,19,528.10
189 28 RAIN WATER PIPES & FITTINGS : 0 0.00 0.00 0.00
Supply,Providing, fixing, testing and commissioning in position
UV stabilised 75 mm dia UPVC Rain water pipe with Fittings (IS:
13592 Type - B). In case of ceiling hanging, the supply of Pipe
Clamps (Chilly/MS angle) is in the scope of Contractor.
Supply,Providing and fixing 150 mm x 150 mm.dia CI Grating
for Rain water pipes 110 mm dia.
Providing & fixing rain water `Khurras' size 200x200 mm required
depth with lead flashing around the pipe with one piece lead
193 (iii) sheet of 3 mm thick set on a layer of cold bitumen. Each 4.00 531.00 2,124.00
194 0 Sub-Total of Plumbing Works 0 0.00 0.00 20,53,701.31
195 0 Electrical Works 0 0.00 0.00 0.00
196 A. Circuit Cum Wiring 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supplying & Wiring for light point/ fan/ exhaust fan point/ call bell
point with 1.5 sqmm FR PVC insulated copper conductor single
core cable in surface / recessed 1.6 mm thick PVC conduit with
modular switch and earthing the point with 1.5 sqmm FRLS PVC
197 1 insulated copper conductor single core cable including providing 0 0.00 0.00 0.00
modular box with cover of requisite number of modules including
providing cover plates as required.
Single light point controlled by one 6A switch or first light point of
199 b) Subsequent point of group control Each 67.00 529.82 35,497.94
Supplying & Wiring for twin control light point with 1.5 Sqm.m
FRLS PVC insulated copper condutor single core cable in
surface / recessed PVC conduit 2 way modular switch,modular
200 2 plate,suitable GI box and earthing the point with 1.5 Sqm.m Each 4.00 763.46 3,053.84
.FRLS PVC insulated copper conductor single core cable etc as
Supplying and fixing two module steeped type electronic fan
201 3 regulator with proper modular plate switch box including Nos 28.00 593.54 16,619.12
connections etc. as required.
Supplying and fixing 6 Amp plug with 6 Amp switch (Modular
Type) on existing board.
Supplying & fixing suitable size GI Box with modular plate and
cover in front on surface or in recess, including providing and
203 5 fixing 3pin 5/6 amps modular socket outlet and 5/6 amps Nos 37.00 518.02 19,166.74
modular switch etc. as required.
Supply, installation, testing & commissioning of 6 / 16 Amp Plug
Boards consisting of a 16 Amp clip-in type modular switch with
indicator and a 6/16 Amp clip-in type modular shuttered plug
204 6 socket fixed on metallic concealed box including interconnections Nos 49.00 676.14 33,130.86
and making good the damages caused complete as required and
as per direction of Engineer-in-charge.
Supplying, installation, testing & commissioning of 20 Amp AC
starter switch with 25 Amp modular socket outlet with 25 Amp
Plug on surface or in recess, on 2 Nos two module GI box with
205 7 plate etc. complete with direction of Engineer-in-charge. Starter- Each 16.00 1373.52 21,976.32
Crabtree(cat no-ACT0202504) or equivalent.
Wiring for circuit/ submain wiring along with earth wire of
following size of FRLS heavy gauge PVC insulated copper
206 8 conductor single core cable in heavy duty PVC conduit laid in 0 0.00 0.00 0.00
surface/ recess as required.
210 B. Fan & indoor Fixtures 0 0.00 0.00 0.00
Supply, delivery and fixing of Ceiling fan hook box made out of
18 swg GI sheet and containing 10 mm dia round ms bar
projecting atleast 150mm on either side & duly bent to
accommodate ceiling fan down rod bolt & having earthing
arrangement as per direction of Engineer-in-charge.
Supplying, installation, testing and commissioning following type
of light fixtures with dummy box for surface mounted fixtures
only, fans and exhaust fans with all accessories, as
212 10 required.(The colour temprature for fixtures shall be between 0 0.00 0.00 0.00
3500 deg K & white in colour as per application) ( Use
antibacterial UV Light for blood bank rooms.)
Retail Down type LED Light surface fitting 2' x 2' (4320 Lumen/
36 W) similar to Halonix (CAT No:HLFPS-06-36-CW) /
Equivalent of Bajaj/ Wipro/Philips.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Retail Down type LED Light surface fitting 1' x 1'(2160 Lumen/
18 W) similar to Halonix (CAT No:HLDLS-S06-18-CW) /
Equivalent of Bajaj/ Wipro/Philips.
Retail Down type LED Light surface fitting (1800 Lumen/ 15 W)
215 c) similar to Halonix (CAT No:HLDLS-06-15-CW) / Equivalent of Each 49.00 2283.30 1,11,881.70
Bajaj/ Wipro/Philips.
Commercial Batten type wall mounted 4' LED fitting (2400
Lumen/ 20W) similar to Halonix (CAT No:HLB-03-20-CW-AL-
SQ-HL2) / Equivalent of Bajaj/ Wipro/Philips.
Retail Down type LED Light surface fitting (1080 Lumen/ 9 W)
217 e) similar to Halonix (CAT No:HLDLS-R06-09-CW) / Equivalent of Each 17.00 1180.00 20,060.00
Bajaj/ Wipro/Philips.
Batten typet wall mounted 2' LED fitting Mirror Ligh (600
218 f) Lumen/ 5W) similar to Halonix (CAT No:HLB-07-05-CW-IP) / Each 13.00 708.00 9,204.00
Equivalent of Bajaj/ Wipro/Philips.
Endura type 1200 Lumen/10W LED Bulkhead wall fitting Halonix
219 g) (CAT No:HLBH-21-10-CW)/ Equivalent of Bajaj/ Wipro/Philips. Each 11.00 1652.00 18,172.00
Supplying and fixing call bell/ buzzer suitable for single
220 h) phase,230 V, complete as required. Each 2.00 204.14 408.28
Supplying, installation, testing and commissioning of ceiling fan
221 11 (5 star rating) including wiring the down rod, earthing etc as 0 0.00 0.00 0.00
required (Make : Bajaj/Usha/ Crompton/ Orient/ Khaitan/
Supplying, installation, testing and commissioning of wall
mounted fan (5 star rating) including earthing etc as required
Supplying, installation, testing and commissioning of Heavy Duty
Exhaust fan (5 star rating) including louvres, Ceiling Rose &
227 C. Panels, MDBs, DBs. MCBs 0 0.00 0.00 0.00
228 14 MAIN DISTRIBUTION PANEL 0 0.00 0.00 0.00
One (1) Incomer - 160 Amp, 25 KA, FP MCCB with 3 Nos
Phase indicating lamps with control fuse/ MCB Digital Voltmeter
and Ammeter with selector switch .
Busbar - 200 Amp Al busbar suitable for operation at 415 Volt,
50 Hz, 3 Phase Supply.
Eight(8) - Outgoing Feeders for (2 nos LDBs, 2 No PDBs &
Four spares) each Comprising of
Six(6) - Outgoing Feeders for (1 nos Borewells, 1 No Fidder
233 0 panel & Four spares) each Comprising of 0 0.00 0.00 0.00
Supplying and fixing following way, horizontal type three pole and
237 15 neutral, sheet steel, MCB distribution board, 415 V, on surface/ 0 0.00 0.00 0.00
recess, complete with tinned copper bus bar, neutral bus bar,
6 way, Double door(4+18)
Supplying and fixing following rating MCBs/ Isolator in the
existing MCB DB complete with connections,testing and
commissioning etc. as required
240 a) 63 Amps, FP 10 KA MCB (C-Curve) Each 2.00 3543.54 7,087.08
241 b) 32 Amps, FP 10 KA MCB (C-Curve) Each 2.00 2030.78 4,061.56
242 c) 6 Amp to 32 Amp, 10 KA SP MCB (C-Curve) Each 60.00 397.66 23,859.60
243 D. Cables, Cable Laying & Termination 0 0.00 0.00 0.00
Supplying & Testing of 1.1 KV grade Aluminium XLPE power
244 17 cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. 0 0.00 0.00 0.00
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Laying of one number PVC insulated and PVC sheathed/XLPE
power cable of 1.1KV grade of following size direct in ground
249 18 including excavation (75 cm),sand cushioning,protective covering 0 0.00 0.00 0.00
and refilling the trench etc as required.
251 b) Above 35 sq. mm and upto 95 sq. mm Mtr 60.00 398.84 23,930.40
252 19 TERMINATION OF CABLES 0 0.00 0.00 0.00
Supply & Making end Termination with brass compression gland
and Cu/aluminium lugs for PVC insulated and PVC sheathed
cable of 1.1 kv grade (without cost of Cable)
Supply, fabricating and installing following size of hot dip G.I.
perforated type cables trays including suspending from ceiling
with angle, rods connection pieces, horizontal vertical bends,
258 0 reducers, tees, cross members,G.I. nut bolts, G.I. washers, 0 0.00 0.00 0.00
fasteners etc. complete as required per specifications &
approved by the Engineer Incharge.
259 a) 150 mm (W) X 50 mm depth X 1.6 mm thickness Mtr 30.00 322.14 9,664.20
260 A. External Light Fittings 0 0.00 0.00 0.00
Supplying, installation testing and commissioning following type
261 21 of external light fixtures with all accessories as required. 0 0.00 0.00 0.00
60 Watt Outdoor LED Luminaires Street Light (6500 lumen)
PHILIPS (CAT No:Make: Philips BRP062 LED 65 CW SLA S1
PSU) / Equivalent of Bajaj/ Wipro connected to 32 MM Dia 800
mm GI bend pipe fixed on Wall or column with GI Clamps & hard
ware etc. as required.
Gate Light (Make: Bajaj Spigot for BJMPTI 125 MV LPF CAT
No: HPMV 125 W or equivalent of Philips/ Wipro)along with
263 b) loose wire box, connectors with one 10A MCB as required No 2.00 5470.48 10,940.96
suitable for operation on 240 Volt AC supply as required.
265 22 Feeder Pillar for External Lights 0 0.00 0.00 0.00
Supplying installation testing commissioning of double door
feeder pillar fabricated out of 2 mm thick CRCA sheet duly
266 0 painted, 200 Amp Al busbar with neutral bus rincluding cc/ brick 0 0.00 0.00 0.00
foundation as required including following internal fixtures.
267 0 1 No - 32 Amp TPN MCB Incomer (C-Curve) 0 0.00 0.00 0.00
268 0 4 Nos - 16 Amp SP MCB Outgoing (C-Curve) 0 0.00 0.00 0.00
1 No - 16 Amp SP MCB with 6/16 Amp socket outlet with 10
269 0 Amp modular switch and 1 No- Bracket Holder with 6 Amp Set 1.00 25960.00 25,960.00
Modular switch.
271 B. Lightning Protection System (Arrestor) 0 0.00 0.00 0.00
Providing and fixing of lightning conductor finial, made of 25 mm
dia 1000 mm long, Solid Copper , having multiple prong at top,
272 23 with 85 mm dia 6 mm thick copper base plate including holes Each 4.00 8732.00 34,928.00
etc. Along with Test junction complete as required.
Supply & Fixing of Copper plate Earthing (600x600x3mm thick)
including accessories, and providing masnory enclosure with
cover plate having locking arrangement and watering pipe of 2.7
meter long etc. with charcoal/coke and salt as required.
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia GI
pipe from earth electrode including connection with brass nut,
bolt, spring, washer excavation and refilling etc. as required.
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Providing and fixing 25 mm X 5 mm dia copper strip on
277 26 wall/surface or in recess for connection etc. as required. Mtr 40.00 1006.54 40,261.60
Providing and fixing 4.0 mm dia cu wire on surface or in recess
for loop earthing as required.
279 0 Sub-Total of Electrical Works 0 0.00 0.00 19,35,846.64
280 0 Firefighting Works 0 0.00 0.00 0.00
281 A Fire Extinguishers 0 0.00 0.00 0.00
Supplying installation testing and commissioning of ABC type fire
282 1 extinguishers of 6 kg capacity confirming to IS:14609 including Nos 4.00 3050.30 12,201.20
cost of all material & labour for all floors & service building etc. all
Supplying, installation, testing and commissioning of CO2 type
283 2 Fire Extinguisher 4.5 kg capacity confirming to IS: 2878 made Nos 4.00 7091.80 28,367.20
from ISI marked seamless cylinder confirming to IS: 7285, fitted
Supplying, installation, testing and commissioning of Mechanical
284 3 Foam type 9 litre capacity Fire Extinguisher, ISI marked, IS: Each 1.00 4681.06 4,681.06
10204, containing 540 ml AFFF liquid ISI marked, IS: 4989 Part
285 E MISCELLANEOUS WORK : 0 0.00 0.00 0.00
Single sided EXIT LED Light fitting signage(both side visible) with
built in battery back-up for 2 hrs with proper wiring with PVC
conduiting from the existing power sources for all floors etc.
Make:- BAJAJ (CAT No : BESL O3 LED SSD WBB Green) /
Equivalent of Crompton/ Wipro/ Philips
287 0 Sub-Total of Firefighting Works 0 0.00 0.00 68,375.10
289 0 Data Net Working, Telephone(IP EPBX) 0 0.00 0.00 0.00
Supply,Installation,Testing & Commissioning of 4 pair Cat6
U/UTP Cable in the existing surface/ recessed steel/ PVC
290 1 conduit as required: The 4 pair Unshielded Twisted Pair cable Mtrs. 300.00 84.96 25,488.00
shall be UL Listed,exceeds the requirements of ANSI/TIA-568-
C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by
Supply,Installation,Testing & Commissioning of Cat6 I/O with
Face plate: The Outlet shall meet or exceed requirement as per
ANSI/TIA 568C.2,ISO/IEC 11801, & EN50173. The information
outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return
loss should be verified for CAT6 @ 250Mhz & CAT6A @
500Mhz. The information outlet connector shall be of gold/nickel,
291 2 thickness of gold > 0.8 μm. The connectors shall be compatible 0 0.00 0.00 0.00
as per IEEE 802.3af standard for POE application. The PVC
material of Face plate should complie ABS /UL94-V-O certified.
Make: Tyco / Legrand / Panduit
Supply,Installation,Testing & Commissioning of Cat 6, 24-port
loaded, 1U Modular Jack Panel Should accommodate Cat6 with
Rear Cable Management and Front removable Tooless
Information outlet. Should have easy clip management with
293 3 labels and clear label covers, Made with of Dicast Aluminium Nos 1.00 16486.96 16,486.96
Alloy Material and Non Corrosive with Cat6 toolless RJ45 x 24
ports with color code front panel with patch cord locking. Make:
Tyco / Legrand / Panduit
Supply and installation of Cat6 UTP 24 AWG Patch Cord Patch
cord: 6 UTP Patch Cords are Factory Tested for Better Quality
and Suitable for the High Speed Data Transmission. Complies to
the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data
Networks Speeds Up to 10/100-Base-T and 1000-Base-T.
294 4 Available In LSZH Jacket- Reduced Toxic Gasses Emitted 0 0.00 0.00 0.00
During Combustion , RJ45, 8P8C, 2 FORK 50μ’’ Gold Plated
Contacts , 100% Factory Tested , Transparent Boot Cable
Assemblies. Make: Tyco / Legrand / Panduit
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Head Description of Item Unit Qnty. Rate Amount
Supply,Installation,Testing & Commissioning of 24x
10/100/1000 Ethernet L2 Fully Managed Switch with 370W PoE
budget, 4x 1G SFP uplinks. Switch should support 802.1Q
297 5 VLAN, MSTP, L2 & L3 . All hardware should supplied with Nos 1.00 85585.40 85,585.40
necessary mounting brackets and IN power cord with 3 years
warranty. Make: Cisco/HP/Netgear/Digisol
Supply,Installation,Testing & Commissioning of 6U/500D Wall
Mount Rack with Accessories: The rack size should be 600W x
500D, Front frame integrated with top, bottom, front and two side
panels for better rigidity and strength, Front Glass Door with
Lock loaded, Compliance with standards shall be UL 2416., DIN
ISO 9001:2008 including Power Distribution Unit (06/16 Amp
298 6 Indian-Standard - 06 Socket - Single Pole / Screw Mountable / Nos 1.00 11023.56 11,023.56
16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with
Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC -
90 CFM, dB 42), 2nos 1U Metal Cable manager with Plastic
cable loops and H/W screw. Make: Valrack/Rittal/ APW
Supply & Installation of RJ-11 Information Outlet Set
Supply & Laying of 1 pair 0.5sq telephone cable in existing
conduit complete including termination, testing etc complete as
required nd as per direction of Engineer-in-charge.
Supply, delivery, installation & testing of TV outlet boards
containing a clip-in type modular TV Socket outlet fixed on
metallic concealed box including connections and making good
the damages caused complete as required and as per direction
of Engineer-in-charge.
Wiring to TV Antenna Socket outlet from junction box with
Coaxial copper conductor TV antenna cable run inside prelaid
303 10 conduit complete including termination, testing etc complete as Mtrs. 60.00 113.28 6,796.80
required and as per direction of Engineer-in-charge.
EPABX System of 32 lines extendable to 64 lines, No. of
Junctions -4, Console Operator-1, ISDN Compatible.
Extendable to 64 intercom connection;
Internal/External Music on Holding, Operator/Auto-attendant
Mode, Remote Programming
Day/Night Mode (Manual), Music and Ringing Recordable OGM
(outgoing message), Music Duration 20 Seconds Caller ID, Call
Transfer, Call Forwarding Manually, Outgoing Call Transfer,
304 11 Power Failure Transfer, Specific Main Line (CO/Trunk Line) No 1.00 53100.00 53,100.00
Dialing, Three Way Conference, Do Not Disturb, Auto/Manual
Dial-Out Mode Type: Digital, Analog
Temperature Range : 0-50
Operating Humidity: 0-95%, Non Condensing
305 12 Supply, Instalation of Push Button Telephone. Nos 10.00 5310.00 53,100.00
Supply, delivery and laying of following sizes of 2mm thick PVC
Conduit concealed in wall/ column/ roof slab of the building
alongwith other accessories and 18 swg GI wire complete for
307 13 Electrical Wiring/Telephone / TV & Data cable wiring as required 0 0.00 0.00 0.00
and as per direction of Engineer-in-charge.
310 0 Sub-Total of Other Works 0 0.00 0.00 3,11,859.84
311 Grand Total 1,75,07,246.43
311 Grand Total 1,75,07,246.43
Digitally signed by
Rakesh Rakesh Narayan Sinha
Narayan Sinha Date: 2023.02.08
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
5 NIT.pdf
Tender Document
3a GCC PMC Contracting Works.pdf
Tender Document
3b SCC.pdf
Tender Document
8 Milestone.pdf
Tender Document
11 BOQ DHE 009 NHM.pdf
Tender Document
13 List of Approved Makes NHM Project Odisha.pdf
Tender Document
14 Scope of Work.pdf
Tender Document
Drawings Dhenkanal PHC Marthapur.pdf
Tender Document
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .