8135 REPAIR REPLACEMENT OF POLE POLE PAINTING AND LT CABLE MCCBs FOR BLDGS UNDER HQ MNA HQ WNC AT NAVAL DOCKYARD UNDER AGE EM I UNDER GE NW KUNJALI

Amount

Taking down security/street light fitting for repair & checking internal wiring, cleaning complete & refixing the same on position after rectification of defects/replacement of items including required cable of 1.5 sqmm 3 core for making electric connections complete all as specified and directed.

S&F in repair FRP looping box 225x295x122mm with locking arrangement, shockproof and rustproof, rot-proof and termite resistance, cable entry from bottom and side, 100% weather proof for outdoor installation suitable for pole mounting, tamper proof, restricts unauthorised tapping, IS 11731, IP 66/67 suitable for 16-35 sqmm 3.5 core aluminium cable including 1 No MCB 2-32 Amp and connector block two way and fixing with flat aluminium clamps not less than 25 mm x 3 mm with suitable size nuts, bolts and washers inside and outside looping box complets as directed.Make : Hensel Cat No: KF 3500H or equivalent make approved by GE

M&L for Scraping old paint from steel tubular poles by wire brush not more than up to 9.0 mtr length above ground level including street light arm applying one coat of steel primer and two coat of aluminium paint and marking pole No. complete all as specified and directed.

S & F in replacement decorative LED post tops with transparent diffuser 40W, IP 65 protection complete with all accessories and complete all as specified and directed.

S & F in replacement LED garden light 10W cylindrical shaped integral decorative LED bollard with opal acrylic diffuser and IP 65 with all accessories includingn PCC foundation tapper plug, bolts, nuts, screws etc complete all as specified and directed .

S&F in replacement of LED street light 120 W energy saving and envirment friendly light fitting with housed in pressure dia cast aluminium housing with sealed toughened glass cover, SMD LED with secondery lens luminaires with IP 66 protection including all fixing accessories complete all as specified and directed.

S&F in replacement of LED street light 90 W energy saving and envirment friendly light fitting with housed in pressure dia cast aluminium housing with sealed toughened glass cover, SMD LED with secondery lens luminaires with IP 66 protection including all fixing accessories complete all as specified and directed .

S&F in replacement of LED street light 60 W energy saving and envirment friendly light fitting with housed in pressure dia cast aluminium housing with sealed toughened glass cover, SMD LED with secondery lens luminaires with IP 66 protection including all fixing accessories complete all as specified and directed.

Supply and fix in replacement of LED flood lights 250 W energy saving and enviromental friendly light fitting IP 66 high power LED floodlight with pressure die cast aluminium housing complete with all accessories complete all as specified and directed.

S&F in replacement of LED highbay light 150 W energy saving and envirment friendly light fitting, pressure dia cast aluminium housing with aim & adjustable bracket, matt finished reflector for gglare elimination, SMD LED with secondary lens with IP 66 protection including all fixing accessories complete all as specified and directed .

S&F in repair of LED Aviation Light Luminaries complete all as specified and directed. Make : Bajaj Cat No BGAV 302 LED or equivalent make in list of manufactures

Supply and fixing in replacement flexible LED AC rope/striplight 60 Watt, IP67 of any colour as per existing complete all as specified and directed by Engr-in-Charge. Make : Havells cat part No. LHEHCPP1ATA6F075 or equivalent make in list of manufactures

S& F GI cable tray perforated type 2 mm thick of size 600x50mm ( Including pre fabricated GI clamp suitable for fixing/supporting ) with0.71mm thick aluminium sheet cover, alloy 31000 H4 in ridges, Hips vally gutter cable trucking for plain to be fixed on any wall (brick/stone) vertically/horizontally including all accessories complete bending,shaping,drilling,welding, cutting & all fixing arrangement complete all as specified and directed .

S& F GI cable tray perforated type 2 mm thick of size 450x50mm ( Including pre fabricated GI clamp suitable for fixing/supporting ) with0.71mm thick aluminium sheet cover, alloy 31000 H4 in ridges, Hips vally gutter cable trucking for plain to be fixed on any wall (brick/stone) vertically/horizontally including all accessories complete bending,shaping,drilling,welding, cutting & all fixing arrangement complete all as specified and directed .

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core. laid in trench/ duct / along pole/wall etc including making connection complete all as specified and directed . Note: The cost of thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core. laid in trench/ duct / along pole/wall etc including making connection complete all as directed. Note : The cost of thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core. laid in trench/ duct / along pole/wall etc including making connection complete all as specified and directed . Note : The cost of thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3.5 core. laid in trench/ duct / along pole/wall etc including making connection complete all as specified and directed . Note : The cost of thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core. laid in trench/ duct / along pole/wall etc including making connection complete all as specified and directed . Note : The cost of thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with copper conductor of size 50 sqmm 3.5 core laid in trenches, passing through pipes, fixed on wall complete including connecting properly by means of thimble and taking out damaged unserviceable cable complete all as specified and directed . Note : The cost of thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core. laid in trench/ duct / along pole/wall etc including making connection complete all as directed. MAKE : Gloster/Polycab/Finolex Note : The cost of thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core. laid in trench/ duct / along pole/wall etc including making connection complete all as specified and directed . Note : The cost of thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 240 sq mm 3.5 core. laid in trench/ duct / along pole/wall etc including making connection complete all as specified and directed . Note : The cost of thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 300 Sqmm 3.5 core. laid in trench/ duct / along pole/wall etc including making connection complete all as directed. Note : The cost of thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

S & F in replacement hot dip galvanized anti corroded weather proof octagonal electric poles 8 Mtrs long top mounting on foundation complete with base plate including PCC foundation as per SSR provision and directed with 1500 mm long arms bracket, tapper plug, bolts, nuts and screws etc as specified complete including taking out existing RCC/damaged rusted MS pole with street light and street light bracket complete all as specified and directed.

S & F in replacement hot dip galvanized anti corroded weather proof octagonal electric poles 9 Mtrs long top mounting on foundation complete with base plate including PCC foundation as per SSR provision and directed with 1500 mm long arms bracket, tapper plug, bolts, nuts and screws etc as specified complete including taking out existing RCC/damaged rusted MS pole with street light and street light bracket complete all as specified and directed .

Excavation in trenches n exc1.5m wide and n exc in depth for laying of cables and getting out in loose/soft soil complete all as specified and directed .

Returing filling in including spreading, levelling watering and well ramming in layers not exc 25cm complete all as specified and directed .

Removing excavated material n exc 50cm and deposting where directed at a level n exc 1.5m above the starting point complete all as specified and directed .

Material and labour for sand filling in trenches fine dry sand as sand cushioning to cable 8 cm before laying of cables and 15 cm after laying cable which shall be punned down to 10 cm complete all as specified and directed. (Note : Only punned down thickness shall be measured and paid)

M&L for un-reinforced,precast concret cable cover of size 250x150x40mm class LV type-I for cable protection complete all as specified and directed .

Supply and fix in replacement MS arms bracket 30 degree bend, 1.5mtr long for mounting one in nos street light fitting including clamps / nut / bolts & washer to brace the same properly with duly painted in synthetic enamel paint of two coat in silver colour complete all as specified and directed .

S&F GI tubing light grade 40mm dia with all fittings laid in trenches/fixed on wall/ceiling including dismantling of old pipe etc complete all as specified and directed.

S&F GI tubing light grade 80mm dia with all fittings laid in trenches/fixed on wall/ceiling including dismantling of old pipe etc all as specified and directed.

S&F GI tubing light grade 100 mm dia with all fittings laid in trenches/fixed on wall/ceiling including dismantling of old pipe etc complete all as specified and directed.

Cutting road/hard standing for laying of cable and re mataling/making good the same to match the existing surface complete all as specified and directed .

Taking down the LT ACB of capacities 630Amps to 2000Amps of any make for repairs, servicing, comprising the following & refixing the same, re-orientation & labour for taking, defective parts & refixing the same spare parts:- (a) Checking /repairs of the mechanism of ACB (b) Checking/repair of the manual closing of the breakers (c) Decarburizing, setting reassembling, cleaning adjustment of fixed contacts, main contact & chamber and applying petroleum jelly all as complete.

Decorbonising /cleaning of LT 415/380V 3 phase bus bar, bus bar chambers of feeder pillar box, electrical connection complete, ACB, switch fuse unit arrangement incoming & outgoing installed in at various location after removing the complete bus bar from the bus chamber, cleaning with CTC & insure proper decorbonising refixing the same applying backtal (red) solution to the bus bar insulator & checking all the connections & tighting the nuts & bolts thimbles of incoming & out going system complete including replacement of defective rusted bolts, nuts & washers all as specified & directed.

Decorbonising/ cleaning of ducts of HT/LT cable from various location as per following description. (a)Removing of accumulated, stagnated water/oil from the duct either manually or mechanically.(b) Cleaning of cable bunch in duct of all accumulated slit/mud/debris/foreign material. (c) Removing & repositioning of RCC/MS duct covers including one coat of red oxide and one coat of black paint as required.(d) Patch civil work plastering and concreting work.

S&F in repair of LED spotlight 3W of existing colour and shape complete all as specified and directed.

S&F in repair of double door type vertical type TPN DB 4 Way ,240V with 100A copper busbar , double door type IK 09 protection suitable for housing MCCB's all as specified and directed. Make: Legrand cat No 507781 or equivalent make from list of manufactures Note : DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

S&F in repair of double door type vertical type TPN DB 6 Way ,240V with 100A copper busbar , double door type IK 09 protection suitable for housing MCCB's all as specified and directed . Make: Legrand cat No 507781 or equivalent make from list of manufactures Note : DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

S&F in repair of double door type vertical type TPN DB 8 Way ,240V with 200A busbar , with metalic double door type IP 43 IK 09 protection suitable for housing MCCB's all as specified and directed .Make: Legrand cat No 507783 or equivalent make from list of manufactures. Note : DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

S & F in repair of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A complete all as specified and directed .

S & F in repair MCB DB double door SPN 12 Way with 200 Amps rated copper bus bar complete all as specified and directed .

S & F in repair MCB DB double door SPN 8 Way with 200 Amps rated copper bus bar complete all as specified and directed ..

S & F MCB SP 6-32 Amps,10KA. 230volts complete all as specified and directed .

S & F MCB SPN 40A-63 Amps,10KA, 230Volt complete all as specified and directed .

S & F MCB TP 63 Amps,10KA, 230Volt complete all as specified and directed .

M& L for Disconnecting the electric connection and replacement of unserviceable MCCBs of capacity MCCB 63 Amps, 25 KA capacity 3 Pole complete all as specified and directed ..

All as per item No. 50 but for MCCB 100 Amps 25 KA capacity 4 Pole complete all as specified and directed .

All as per item No. 50 but for MCCB 125 Amps 25 KA capacity 4 Pole complete all as specified and directed .

All as per item No. 50 but for MCCB 160 Amps 25 KA capacity 4 Pole complete all as specified and directed .

All as per item No. 50 but for MCCB 200 Amps 36 KA capacity 4 Pole complete all as specified and directed .

All as per item No. 50 but for MCCB 250 Amps 36 KA capacity 4 Pole complete all as specified and directed .

All as per item No. 50 but for MCCB 400 Amps 36 KA capacity 4 Pole complete all as specified and directed .

Supply and fixing in repair new generation recessed mounted ultra slim panel LED 2X2 Luminaire 36 watt and CRCA powder coated body and high translucent diffuser provides high quality ecomonic energy saving lighting to modern offices. Suitable for 600 x 600 mm modular/POP/Gypsum ceiling complete all as specified and directed . Make : C&S Cat No:LTCRSLM36WATT2x2 or equivalent make from list of manufactures

Supply and fix in repair of STRAIGHT THROUGH JOINT complete with jointing material (Heat srinkable) for 1100V grade cable for XLPE armoured alluminium conductor cable of size 120 to 185 sqmm 3.5 cre complete all as specified and directed.

Supply and fix in repair of STRAIGHT THROUGH JOINT complete with jointing material (Heat srinkable) for 1100V grade cable for XLPE armoured alluminium conductor cable of size 240 to 400 sqmm 3.5 cre complete all as specified and directed.

Supply and fix in repair of STRAIGHT THROUGH JOINT complete with jointing material (Heat srinkable) for 1100V grade cable for XLPE armoured alluminium conductor cable of size 95 to 120 sqmm 3.5 core complete all as specified and directed.

All as per item No 60 above but for cable size 25 to 35 sqmm 3.5 core complete all as specified and directed.

All as per item No 60 above but for cable size 16 to 10 sqmm 3.5 core complete all as specified and directed.

Supply , fixing, testing in repairs of JEF ECO SAFE Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 25 mm dia with 250 micron ( averaSchneider ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF Powerfill Loresco compound shall be supplied in 50 Pound Bag. ( 1 Bag of 50 Pounds required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set alongwith earth pit weatherproof incl all as specified . Note : Back-fill compund shall not be mixed with any soil while pouring in the bore hole.

S&F in repair of 50 Sqmm single core copper cable or main earthing lead fixed to wall with clamps or recess or croses or buried in ground or drawn in conduits/pipe or fixed to poles or any other indicated situation for loop earthing etc as required all as specified and directed .

M&L for 25x4mm GI earth continuity conductor or main earthing lead fixed to wall or buried in ground or drawn in conduit/ pipe or fixed to transformer/panel body complete all as specified and as directed.

M&L for finding underground LT cable faults of any size of cable by using fault locating machine and jointing cable with LT joint kit of appropriate size including testing of power supply complete all as specified and directed. Note : (i) LT Cable joint kit shall be measured and paid separately under respective items of the schedule. (ii) Cost of hiring of cable fault locator machine with trained technician /operator deemend to be included in quoted rate.

SHRI SAI ENTERPRISES (BID ID -3133284)

N.S.ENTERPRISES (BID ID -3128246)

Sagar Electricals (BID ID -3135721)

SHREE JAGDISH FURNITURE CO. (BID ID -3134548)

Shree Ayyappa Engineering (BID ID -3135620)