SPECIAL REPAIR TO COMMUNITY HALLS AT GANGA VIHAR AND SARASWATI VIHAR COLONY OF PCDA (P) AT NEW CANTT ALLAHABAD UNDER GE (WEST) ALLAHABAD

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F glazed ceramic tiles, coloured superior quality 300mmX450mmX7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in vertical surface including 10mm thick rendering in CM 1:4 complete all as specified and directed.

S&F joint free non skid Ceramic tiles, coloured, superior quality 7 to 8mm thick (square/ rectangular) polished, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 10mm thick (square/rectangluar) area of each tile not exceeding 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

Dismantling of bricks (laid flat or on edge) or brick tiles laid dry and pointed in any mortar in floors, channels, kerbs, aprons, over roof surfaces etc. in each layer complete all as specified and directed.

Demolition of mud in roofs any thickness and stripping out/ taking down old existing tar felt from any type of roof including plaster complete all as specified and directed.

Removal of surplus excavated soil to a distance n.exc. 50mtr and depositing where directed at a level n.exc. 1.5 mtr above starting point complete all as specified & directed.

M&L for providing plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in roof padding, kerbs or mud stops rounded or chamfered including weathering, slidghtly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

M&L for roof treatment with polymeric water proofing membrane as under :- (a) Cleaning the roof surface from dust / dirt and any other foreign materials . (b) M&L for rendering 10mm thick in cement mortar (1:4) over concrete surfaces of roof, mixed with 3% integral water proofing compound by weight of cement or as per manufacturers instruction including finishing surfaces even and smooth without using extra cement. (c) Applying a coat of bituminious primer @ 0.50 liters per square meter uniformily after the surfaces fully dried (d) M&L for applying a coat of hot blown bitumen grade 85/25 conforming to IS 702 over primed surface of roof slab @ 1.20 Kg/Sqm complete all as specified and directed. (e) M&L for APP based polymeric water proofing membrane weight minimum 3.5 Kg / Sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 160 gms/Sqm or as per IS), laid over hot bitumen surface by torched application. (f) Applying a tack coat of hot blown bitumen grade 85/25 @ 1.2 Kg/Sqm. (g) Binding with coarse sand dry @ 1.00 Kg/Sqm dusted over bitumen. NOTE:- Integral water proofing compound shall be measured and paid separately under item No .10 of this Sch A.

Supply only Integral water proofing compound complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm each complete all as specified and directed.

S&F factory made Solid PVC door frame of size 50mmx95mm made out of 5mm single side prelam PVC sheet, reinforced with MS square tube, supplying and fixing in opening with fittings as per specification & drawing complete.

S&F factory made solid PVC moulded door shutter 30mm thick (style) with 2, 4 or 6 raised panel design with 2mm thick moulded both side prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face, style and rails feathered at edges complete all as specified and directed.

M&L for fabrication and fixing in repair anodised aluminium glazed window slinding type with 2 track system using 1.50mm thick aluminium section having frame of size 62.50x38.50mm, track size 62.50x32.50mm section of sliding shutter 38.00x18mm, Make - Jindal/Hindalco including necessary joining cleats, glazing clips, rubber packing and two nos self closing locking arragements of 75mm long fixed with scews. Glazing should be provided with 5mm thick tinted/pin headed/plain (Make - Modi Guard/Saint Gobain) and stainless steel wire cloth 0.36mm nomial dia of wire and average width of aperture 1.40mm complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium powder coated Grill of size 75mmx75mmx4mm thick for windows including joining cleat, anodized aluminium strip beading screw complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding ashlar facing, dressed stone work and precast concrete articles etc. complete all as specified and directed.

M&L for brick work with Fly Ash old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking up or down 15mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.

Taking up or down 20mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.

S&F 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

S&F 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, ceiling, floors etc) for 15mm bore of pipe with new fittings complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, ceiling, floors etc) for 20mm bore of pipe with new fittings complete all as specified and directed.

M&L for cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F in repair bib taps 15mm bore, fancy type, cast copper alloy chromium plated, long body with capstan head and cup screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair stop valves 15mm bore concealed type cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair angle valves 15mm bore fancy type cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair sheet glass shelf assembly 600 mm long ,incl plug ,chromium plated screws and cup washer etc. complete all as specified and directed.

S&F in repair Chromium plated shower rose of size 125mm dia fancy type with arm suitable for 15mm bore pipe and fixed complete all as specified and directed.

S&F in repair 20mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair CP brass tubular towel rail 20mm dia, 'D' type, 600mm long between flanges superior quality fancy type complete all as specified and directed.

S&F in repair Soap dish, brass chromium plated oval shaped fixed to wall with chromium plated brass screws complete all as specified and directed.

S&F in repair stop valves 15mm bore cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair toilet paper holder with flap, superior quality, brass chromium plated, fancy type complete all as specified and directed.

S&F vitreous china wash down water closet pan pedestal pattern including connection to trap and to flushing pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed.

S&F in repair vitreous China squatting pan 'Orissa pattern' size 580x440 mm, white with integral foot rest including 'P' or 'S' trap front or back inlet excluding flushing cistern and flush pipe including connection to trap and flushing pipe etc and making good to floor complete all as specified and directed.

S&F in repair PVC low level flushing cistern white of 10 lit capacity including siphon float valve, rubber cone and flush pipe including brackets etc complete all as specified and directed.

S&F in repair hand shower (Health Faucet) with 8mm dia, 1.5 meter long flexible tube & wall hook for EWC complete with all fittings complete all as specified and directed.

S&F PVC connections 15mm dia 450mm long with CP brass nuts complete complete all as specified and directed.

Demolition and breaking up 100mm (salt glazed ware, AC, PVC) drain pipes of any dia set in cement mortar complete all as specified and directed.

S&F 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed in wall any description and any position complete all as specified and directed.

S&F PVC (SWR) bends any radius suitable for 110mm bore PVC pipe jointed with solvent provided with access door complete all as specified and directed.

Demolition and breaking up 75mm (salt glazed ware, AC, PVC) drain pipes of any dia set in cement mortar complete all as specified and directed.

S&F 75mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed in wall any description and any position complete all as specified and directed.

S&F PVC (SWR) bends any radius suitable for 75mm bore PVC pipe jointed with solvent provided with access door complete all as specified and directed.

S&F in repair PVC (SWR) floor trap plain with grating including jointing with solvent cement 75/100mm dia complete all as specified and directed.

Dismantling of water storage tank of capacity exceeding 250 litre but not exceeding 500 litres complete all as specified and directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks ISI marked, triple layered(cylindrical vertical with closed top) hoisted & fixed in position complete all as specified in SSR Part-I and directed.

S&F in repair vitreous china wash hand basin, white, flat back type of size 550x400mm including MS/CI brackets including cutting for and pinning in ends of brackets of mild steel angle 35mmx35mmx5mm in CM 1:3 including 32mm dia brass chromium plated waste coupling and 32mm bore PVC waste pipe complete complete all as specified and directed. Note :- Fixing of pillar tap/mixer shall be include in the quoted rate and pillar tap shall be measured and paid seperately as supply only under respective item of this Sch.

Supply only pillar taps 15mm bore, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washers and waste pipe, including bedding in cement mortar 1:3 to dwarf wall or fixing cantilever brackets and connecting union to waste pipe, 32mm dia PVC waste pipe and connecting union to pipe overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack (utensil rack) of size 750mmx600mmx250mm made out of stainless steel 0.63mm thick sheet and fixed to wall brass screw and PVC gully including necessary fittings like nuts and bolts etc complete all as specified and directed.

Taking down existing cement plaster including racking out joints, hacking for key & scrubbing down with water complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 on fair faces of concrete surface of ceiling and finished surface fair and even without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer and including one or more coat cement based wall care putty to obtain smooth finish complete all as specified and directed.

M&L for preparation of old plastered surface by complete removal of existing treatment of wall and applying two coats of oil bound distemper over a coat of primer and including one or more coat cement based wall care putty to obtain smooth finish complete all as specified and directed.

M&L for two coats of cement base paint over and including one coat of alkali resistant cement primer on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying two coats of cement base paint over and including one coat of alkali resistant cement primer on old treated surface including preparation of surfaces by filling depression of scrapped sufaces complete all as specified and directed.

M&L for applying three coats of white wash on new plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L for applying two coats of white wash on old plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

S&F in repair 25mm dia mild steel PVC coated fancy type pipe as in curtain rod including fancy type PVC rings, CP fancy type end brackets,sockets and knobs(wall to wall or flush to wall) complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar in floors including cement mortar bedding complete all as specified and directed.

M&L for 18-20mm thick Granite stone (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Granite stone over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Dismantling of wall and ceiling board (fibre, plulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet and fixing at site on PVC frame as per specification and drawing.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive fixing on to wall to make PVC frame as per specification & drawing complete.

M&L for E-board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent make as specified in PS) frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0/cement mortar 1:3 complete all as specifed and directed with following :- (a) M&L for plugging to wall around the rooms, supplying & fixing GI powder coated angle of make (Armstrong or equivalent) of size 25x25mm. (b) S&F 1.60mm dia GI wire suspenders with adjustable clamps including fixing to ceiling with dash free fasterners. (c) S&F GI powder coated tee as in main & cross members at 595mm centre to centre supported suspenders alongwith adjustable clamp to maintain level. (d) S&F E-board ceiling tiles of size 595mmx595mmx4mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE.

MOHAMMAD RIZWAN CONTRACTOR

oasis contractor builder and supplier

M/S SANJAY CONSTRUCTIONS

Matrubhoomi Construction

Jahanvi enterprises

M/S PRAGATEE ENTERPRISES

YASH ENTERPRISES

A C GUPTA