Charging of Un-commissioned 25,63,100 KVA HVDS Substations (EMC Infrastructure) created under RAPDRP Scheme by way of executing Balance Works - (ESD RAJBAGH) - (Scheme Code - PDDSS2324100142)

Amount

Supply of ST Pole 8 mtr. long (ST-410 SP15) having Galvanised Channel Iron Earthing Arrangement as per Drawing CE/P&P/Dwg/2022-STP-E0001 attached including loading from factory unit, its carriage and unloading upto site. (Poles shall be got tested at the cost of bidder prior to its delivery at site for erection)

Erection of ST Pole 8 mtr. long (ST-410 SP15) having Galvanised Channel Iron Earthing Arrangement as per Drawing CE/P&P/Dwg/2022-STP-E0001 attached

Providing of Suspension / Tension Clamp / Anchor Clamp / Dead end Clamp with eye hook (suitable for LT ABC Bare neutral messenger)

Fixing of Suspension / Tension Clamp / Anchor Clamp / Dead end Clamp with eye hook (suitable for LT ABC Bare neutral messenger)

Providing of GI Pole Support Clamp including GI Nut and Bolts with washers (for 9 mtr pole with size 50x8x376mm, 8 mtr with size 50x8x332mm, 8 mtr or 9 mtr PCC with size 50x8x441mm)

Fixing of GI Pole Support Clamp including GI Nut and Bolts with washers

Providing and Fixing of AB Cable End Caps

Supply of 4-core 35 mm sq PVC cable - (from AB cable taping point through piercing connector to SMDB) (including cost of Thimbles/Clamp)

Laying, Testing and Commissioning of 4 core 35 mm sq PVC cable - (from AB cable taping point through piercing connector to SMDB) (including Fixing of Thimbles/Clamp)

Providing of Piercing Connector for Streetlights - Light connections (main line 70-120sqmm/branch line section (4-35sqmm) insulated and insulated branching & bare & insulated branching in case of neutral messanger

Fixing of Piercing Connector for Streetlights - Light connections (main line 70-120sqmm/branch line section (4-35sqmm) insulated and insulated branching & bare & insulated branching in case of neutral messanger

Providing and Earthing of Sub-Station --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239. GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC/Cast Iron slab cover (as per approved drawing)

Providing of Piercing Connector for DB connection from main ABC to DB (main line 70-120 sqmm / branch line section (35-50 sq mm) insulated & insulated branching & bare & insulated branching in case of neutral messanger

Fixing of Piercing Connector for DB connection from main ABC to DB (main line 70-120 sqmm / branch line section (35-50 sq mm) insulated & insulated branching & bare & insulated branching in case of neutral messanger

Providing of Piercing Connector for ABC TO ABC Tee connections (main line 70-120 sqmm/branch line section 70-120sqmm insulated & insulated branching & bare & insulated branching in case of neutral messanger

Fixing of Piercing Connector for ABC TO ABC Tee connections (main line 70-120 sqmm/branch line section 70-120sqmm insulated & insulated branching & bare & insulated branching in case of neutral messanger

Supply of Outdoor type 3 Phase Pole mounted SMDB (Service Main Distribution Box) IP54, (made from 20 SWG CRCA MS sheet by Deep drawn method with connection terminals for R Y B & N - Al bus bar: 20x15mm for connection through ABC line & for giving connections to the consumers . Clearence between busbars : 40mm The SMDB should have front acces and Bottom entry of cable with proper Glands/grommets-Safety Screws & Back Clamp Suitable for 9/8 Mtr ST Pole or 9/8 MTR PCC poles with Nuts/bolts. 1 No. hole provided in U latch arrangement for Padlock bracket and synthetic rubber gasket provided Earthing arrangement : M6/M8 screw provided in the earth strip welded to the box.)

Installation, Testing and Commissioning of Outdoor type 3 Phase Pole mounted SMDB (Service Main Distribution Box) IP54 (made from 20 SWG CRCA MS sheet by Deep drawn method with connection terminals for R Y B & N - Al bus bar: 20x15mm for connection through ABC line & for giving connections to the consumers . Clearence between busbars : 40mm The SMDB should have front acces and Bottom entry of cable with proper Glands/grommets-Safety Screws & Back Clamp Suitable for 9/8 Mtr ST Pole or 9/8 MTR PCC poles with Nuts/bolts. 1 No. hole provided in U latch arrangement for Padlock bracket and synthetic rubber gasket provided Earthing arrangement : M6/M8 screw provided in the earth strip welded to the box)

Providing and Earthing for ST Pole complete by GI pipe 40 mm 3 mtr long through GI Strip 25x3 mm (including for existing poles also)

Providing and Fixing of Insulation tape (Red/Yellow/Black)

Painting of ST poles 8 mtr long with 1 coat red oxide and 2 coats aluminium paint

Providing and Laying of Cement Bottoming of ST poles 8 mtr long in the ratio 1:2:4 mix as per approved drawing (0.45 cum/pole )

Providing and Fixing of Galvanized Nuts and Bolts with Washers of sorts

Supply of 2-Core LT 16 sq mm Aluminium Cable

Laying, Testing and Commissioning of 2-Core LT 16 sq mm Aluminium Cable

Supply of 11 KV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type including pipe, handle, pad lock etc (including cost of its earthing using 25x3 mm strip) (strictly as per drawing attached)

Installation, Testing and Commissioning of 11 KV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type including pipe, handle, pad lock etc (including Fixing of its earthing using 25x3 mm strip) (strictly as per drawing attached)

Supply of 11 KV Horn Gap Fuse Set 3 Phase 200 Amp (strictly as per drawing attached)

Installation, Testing and Commissioning of 11 KV Horn Gap Fuse Set 3 Phase 200 Amp (strictly as per drawing attached)

Supply of Gapless Surge Arrestor, 9 kV, 10 kA, LA with polymer housing, Stn. Type

Installation, Testing and Commissioning of Gapless Surge Arrestor, 9 kV, 10 kA, LA with polymer housing, Stn. Type

Providing and Fixing of 11 kV Polymer Pin Insulator 12 kV, 5 kN, Lighting Impulse 75 kV Positive and 80 kV Negative, creepage distance 320 mm

Supply of 95 sqmm XLPE LT Cable Single core un-armoured FRLS from Transformers to LT DB (including cost of end thimbles)

Laying, Testing and Commissioning of 95 sqmm XLPE LT Cable Single core un-armoured FRLS from Transformers to LT DB (including fixing cost of end thimbles)

Supply of 120 sq mm AB cable (3x120+1x16 street light +1x95/70 messenger) XLPE (1.1kv 3+1 c Al)

Laying, Testing and Commissioning of 120 sq mm AB cable (3x120+1x16 street light +1x95/70 messenger) XLPE (1.1kv 3+1 c Al)

Supply of 70 sqmm AB cable (3x70+1x16 street light +1x50 messenger) XLPE (1.1 KV 3+1 C Al)

Laying, Testing and Commissioning of 70 sqmm AB cable (3x70+1x16 street light +1x50 messenger) XLPE (1.1 KV 3+1 C Al)

Providing and Laying of Cement Bottoming with muffing of existing of Poles (0.3cum) including opening the pits of 9/8 mtr

Providing and Fixing of Straight through Jointing Kits for AB Cable

Supply of 160 Amp TPN (including cost thimbles of various sizes, required)

Installation, Testing and Commissioning of 160 Amp TPN (including fixing cost of thimbles of various sizes)

Supply of 100 Amp TPN (including cost thimbles of various sizes, required)

Installation, Testing and Commissioning of 100 Amp TPN (including fixing cost of thimbles of various sizes)

Supply of 40 Amp MCB SP (including cost thimbles of various sizes, required)

Installation, Testing and Commissioning of 40 Amp MCB SP (including fixing cost of thimbles of various sizes)

Supply of 50 Amp TPN (including cost thimbles of various sizes, required)

Installation, Testing and Commissioning of 50 Amp TPN (including fixing cost of thimbles of various sizes)

Supply of 80 Amp TPN (including cost of thimbles of various sizes, required)

Installation, Testing and Commissioning of 80 Amp TPN (including fixing cost of thimbles of various sizes)

Providing and Fixing of 11 KV / 440 V Danger Plate with Clamp

Providing and Fixing of Anticlimbing Device using GI Barbed wire with end Clamp (2 kg Barbed wire per job/pole with 2 GI Clamp with GI nuts/bolts and washers)

Other associated works (Complete Items)

Shifting of Consumer Meter (1 phase / 3 phase) from existing pole to New Pole (including connectioning & proper GI strip Clamping arrangement)

Supply of Transformer Oil (required for topping of various DTS)

Topping Charges of Transformer Oil in DTs at site

Striaghtening of existing tilted poles by way of opening the pits of 9/8 mtr concerned poles including Cement Bottoming/Muffing

Dismantling of Conventional Energy Meters and transportation to Divisional Stores at Bemina

Dismantling of LT cable

Dismantling of SMDB (Service Main Distribution Box)

Commissioning of existing 100 kVA Sub-Stations. This shall include ACSR jumpering (0.03 ACSR cost incuded), oil topping of tranformers, LTDB / 11 KV GO Set Operationalization

Testing and Commissioning of existing 63 kVA Sub-Stations. This shall include ACSR jumpering (0.03 ACSR cost incuded), oil topping of tranformers, LTDB / 11 KV GO Set operationalization

Commissioning of existing LT cable. This shall include mounting cable on poles wherever required, pre-charge testing.

Commissioning of existing SMDBs (Service Main Distribution Box) This shall include proper fixing on poles/ shifting wherever required / pre-charge testing

Commissiong of existing LT Distribution Box 100/63 kVA DTR With MCCB for outgoing Circuits Distribution Boxes alongwith earthing of enclosures

Providing/Submission of Both Pre and Post Work Execution Geo-Tagged Coloured Photographs of subjected work on A4 sized photopaper (4 pic per page-2 Pre-Work/ 2 Post-Work Each)

M/S WANI ELECTRA & SUPPLIERS