GE/DE-67/2020-21

Amount

CHARPOY GI PIPE :-FD-220 Removing of old unserviceable Nylon newar from existing charpoy GI pipe, reassembling/tightening of Charpoy frame and providing new 12mm thick commercial plywood ISI Marked, BWR Grade of size 1950mm x 900mm including provision of 02 numbers mild steel flat iron stiffeners of size 35mm x 5mm x 900mm long duly fixed across long rails with round headed steel bolts, nuts and washers of suitable size to GI pipe charpoy frame and rough edges of stiffeners smothended by grinding. stifffeners to be provided two coats of synthetic enamel paint over a red oxide. Plytop to be fixed with 10 numbers of superior quality round headed steel bolts, nuts and washers of suitable size as approved by Engr-in-charge. Half round teak wood beading of best quality as approved by Engr-in-Charge to be fixed with adhesive and headless nails all around Plytop. Beading shall be duly french polised with high gloss finish, complete all as specified & directed. (Note :- To ensure genuineness of Plywood used, it is mandatory to produce the machine numbered Purchase Vouchers of Plywood for the full quantity of Plywood along with Manufacturer's test certificate).

Removing of old unserviceable/broken Elbow and replacing with new 03 way GI Elbow 65mm long of 32mm dia ISI marked and fixing in position complete all as shown on drawing & as directed. (Note :- Weight of elbow not less than 420gm per elbow).

Removing of old unserviceable/broken check nut and replacing with new 06 mm thick ISI marked GI check nut of 32mm dia complete all as shown on drawing & as directed.

Removing of old unserviceable long rail from existing charpoy GI pipe and replacing with new long rail of 32mm dia medium grade GI pipe, ISI marked and threading the same 22mm long at one end and 52mm long at other end and fixing in position complete all as shown on drawing & as directed. (Make : Jindal / Tata / Ravindra).

Cutting and converting the old unserviceable long rail as retrieved vide Srl No. 4 here-in-before into two short rails and fixed to charpoy GI pipe duly threaded 22mm long at both side end including removal of old and worn out threaded short rails complete all as specified & directed.

Cutting and converting the old unserviceable short rail as retrieved vide Srl item No. 5 here-in-before into two legs and fixed to charpoy GI pipe duly threaded 22mm long at one end including removal of old and broken unserviceable legs complete all as specified & directed. (Note : Before placing the order in respect of Srl item No. 5 to 6 of Sch 'A' Part-I the necessary cutting schedule be prepared and get approved from the accepting Officer).

NOTE :- (a) For minimum fair wages ,EPF and payment to labour employed, refer Sch A Note No-16,17 and Special Condition 15 of this tender. Contractor must produce all the relevent record such as payment made to labour, EPF etc at the time of payment of RARs/Final bill. No payment will be released to contrator without producing the proper record.

M/s Kapil Furniture

NAVEEN TRADERS

F.M. KHAN SONS

SMS Enterprises

SUNIL TRADERS