JJM 2020-2021- Periyakulam Block - Package No. JJM/PKM-10

Amount

1. PROVIDING FHTC, DEEPENING OF OPEN WELL WITH PUMPING MAIN LINE & DISTRIBUTION LINE AT LAKSHMIPURAM IN LAKSHMIPURAM PANCHAYAT

PUMPING MAIN LINE

Earthwork excavation and depositing on bank with n initial lead of 10 M initial list of 2 m. In hard stiff clay, stiff block cotton soil and hard red earth shales, murram, grvelstony earth and earth mixed with small bounders and hard gravely soil

90 mm HDPE Pipe PN 6

Laying and jointing of 90 mm HDPE Pipes

Refilling the excavated soil in the trenches

80 mm G I Pipe

80mm GI Elbow

80 mm G I coupling

80mm GM Gate Valve

25mm Single Air Valve

Laying and jointing of 80 mm G I Pipes

Provision for Water Meter 50mm Page 81 of TWAD SOR

Provision for Dirt Box

Erection Charges

90 mm H D P E Bend

90 mm HDPE Tee

DISTRIBUTION LINE

Provision for CC Road Cutting

90 mm P V C Pipe 6 Ksc

90 mm P V C Bend

90mm PVC Elbow

90 mm P V C Tee

90 mm P V C MTA

80 mm G M Gate valve

90mm x 63mm PVC Reducer

63 mm P V C Pipe 6 Ksc

63 mm P V C Bend

63 mm PVC Elbow

63 mm P V C Tee

63 mm P V C MTA

50 mm G M Gate valve

25mm Single Air Valve

Solvent

80 mm G I Pipe

80 mm G I coupling

80mm GI Bend

80mm GI Elbow

80mm GI Union

80 mm flange set

80 mm x 65 mm GI Reducer

65 mm G I Pipe

65 mm G I coupling

65 mm GI Bend

65 mm GI Elbow

65 mm GI Union

65 mm flange set

65 mm x 50 mm GI Reducer

50 mm G I Pipe

50 mm G I coupling

50mm GI Bend

50mm GI Elbow

50mm GI Union

50 mm flange set

Earthwork excavation and depositing on bank with n initial lead of 10 M initial list of 2 m. In hard stiff clay, stiff block cotton soil and hard red earth shales, murram, grvelstony earth and earth mixed with small bounders and hard gravely soil

Laying and jointing of 90 mm & 63 mm P V C Pipes

Laying and jointing of 80 mm, 65mm & 50mm G I Pipes

Cutting & Threading of 80mm GI Pipes

Cutting & Threading of 65mm GI Pipes

Cutting & Threading of 50mm GI Pipes

Cement Concrete 1:4:8 using 40MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Cement Concrete 1:2:4 using 20MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Refilling the excavated soil in the trenches

Deepening of Open Well For Two Wells

Open well excavation complying with relevant clauses of T.N.D.S.S Well sinking & with lead upto 10m in Hard granite mmeasured in solid including blasting & stacking - first 2m depth.

open well 24.50m - 26m depth

open well 26m - 28m depth (26.00m 27.50m)

Construction of 30000litre OHT

Earth work excavation & depositing on bank with an initial lead of 10 metre & initial lift of 2 metre in Hard shift clay, stiff block cotton, hard red earth shales, murrum, gravel, stoney earth, and earth mixed with small size boulders and hard gravelly soil (SS 20B) for foundation including shoring, strutting, baling out water providing danger light wherever necessary depositing the surplus earth on bank and other incedential charges etc., complete and as directed by TWAD board Officers

First depth of 2m From 0 to 2 m below GL

Second depth of 2m From 2m to 4 m below GL

Plain Cement Concrete 1:4:8 (one cement, four sand and eight hard granite broken stone of 40mm size ISS gauge) for foundation and footing including mixing, placing, ramming ,finishing curing etc. complete in accordance with standard specification and as directed by the TWAD Board Officers.

Reinforced Cement Concrete Mix M30 grade using 10mm & 20mm Hard blue granite Broken stone (machine crushed) excluding the cost of RTS rods for reinforcement and centering, strutting, shuttering but including cost of all materials mixing, laying, Vibrating the concrete with mechanical vibrators, ramming, consolidating, finishing and curing etc., Complete and as directed by the TWAD Board Officers.

Below 1.5m from GL

0m to 1.50m below GL

0m to 4.50m above GL

4.50 m to 7.32 m above GL

7.32 m to 10.98 m above GL

10.98 m to 14.64 m above GL

14.64 m to 18.30 m above GL

Supply and erection of steel centering, shuttering for soffits and sides including necessary supports and strutting for all RCC works using MS sheets of suitable size of BG10 stiffened with MS angle of size 25 X 25 X 3 mm for boarding laid over I type MS Truss of size 25 X 25 X 3mm about 90cm c/c and supported by 40mm GI pipes (Medium) spaced at 75cm c/c etc complete and as directed by the TWAD Board Officers.

Plain Surface

Below GL

From GL to 3.30m

From 5.30m to 6.30m above GL

From 8.30m to 9.30m above GL

From 11.30m to 12.30m

Square Column:

Square Column Below GL and upto 3.30m above GL

3.31m to 4.30m ht

4.31m to 5.30m ht

5.31m to 6.30m ht

6.31m to 7.30m ht

7.31m to 8.30m ht

8.31m to 9.30m ht

9.31m to 10.30m ht

10.31m to 11.30m ht

11.31m to 12.30m ht

Curved Surface - upto 3.30m ht.

Supplying, cutting, bending, tying, fabricating and placing in position of steel rods for all RCC works including cost of steel and binding wire etc.( The steel should conform to the relevant ISspecification and supplied with test certificate Fe. 415 grade as per IS specification No.1786/1985 and as amended from time to time) delivery at site of work including loading, freight, unloading, stacking, transit insurance charges, taxes etc. complete.and as directed by the TWAD Board officers.

Painting two coats with approved cement paint over one priming coat of white cement over cement plastered wall surface and ceiling including cleaning preparing the surface and curing etc., complete (using cement paint of colour as approved by the Departmental officer) and as directed by the TWAD Board officers.

Fabrication, supply, delivery and fixing of outside MS Ladder of 45cm clear wide made out of 50 mm x 50mm x 6mm MS angle for both sides and for steps at 30cm C/C welded jointed etc ., for I staging from GL to 1st level brace (weight 4.5kg/m) IInd and IIIrd staging upto floor slab and IVth staging from floor slab to roof top. Supply, delivery and fixing of 32 mm GI pipes medium for hand rails from I stage to IVth stage. RCC M30 Grade mix for Landing slab 5 nos. at Ground Level- 1No. and above Ground Level - 4Nos. Supply and fixing of 32mm GI pipe medium for hand rails for the Landing slab. Supplying and fixing of MS Base plate of 100mm X 100mm X 6mm thick for fixing Anchore fastener bolt for fixing of hand rails at Landing slab and MS Ladder providing locking arrangements with two coats of approved enamel paint over one coat of red oxide paint as per approved Type Design and as directed by TWAD board officers.

Providing and fixing of RCC inner access ladder in RCC 1:11/2 :3 (one cement,one and half sand and three aggregate) using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centring,shuttering charges, mixing concrete,curing etc. to required height and clear width of 45 cm consisting of 2 nos. of vertical post of 10 cm x 15 cm and step slab of 25mm x 25mm etc.complete and as directed by TWAD Board Officers.

Providing 110mm PVC vent cowl arrangements mosquito proof nylon net and as directed by TWAD Board officers

Supply and fixing of cut stone of size 0.30m x 0.30m x 0.15m in CM 1;3(one cement and three sand) below inlet pipe for Service Reservoir as directed by TWAD Board Officers.

Providing manhole cover of size 0.60 x 0.60M in RCC 1:1.5:3 with suitable reinforcement and 50x50x6mm MS angle fixed along edges and as directed by TWAD Board officers

Painting TWAD Board emblem on the SR with enamel paint as per Board's specification and as directed by TWAD Board officers

Pipe connection arrangements for inlet,outlet,scour and overflow etc. including cost of pipes,specials,valve,labour charges for lifting, aligning, cutting, threading ,fixing and painting of GI pipes with two coats of approved quality enamal paint etc. complete as detailed below.

65mm GI pipes for inlet connection

65mm GI pipes for over flow & rain water harvesting pipe

50mm GI pipes for scour pipe

65mm GI pipe for delivery pipe

90mm PVC Threaded coupler

63mm PVC Threaded coupler

65mm dia GI Tee

65mm dia GI bend 90

65mm dia GI bend (short)

65mm GI coupler

65mm GI union

65mm GI Elbow

50mm GI union

50mm GI Elbow

65mm GI Tee

65x50mm GI reducer

75mmx63mm PVC reducer

65mm GM gate valve

50mm GM gate valve

63 mm PVC 4Ksc Pipe

Refilling the foundation with excavated earth including consolidation as directed by the TWAD Board officers

Labour charges for GI pipe connection to the OHT, for inlet, outlet, overflow and scour arrangements including cutting and threading, earth work excavation & refilling.

Providing Functional House hold Tap Connections for 411 House Holds

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

2. PROVIDING FHTC AND DISTRIBUTION LINE ARRANGEMENTS AT KRISHNAPURAM IN LAKSHMIPURAM PANCHAYAT

DISTRIBUTION LINE

Provision for CC Road Cutting

65mm GI Pipe

65mm GI Coupling

65mm GI Bend

65mm GI Tee

65mm GI Elbow

65mm GI Hex Nipple

65mm GI Union

65mm GM Gate Valve

65mm x 50mm GI Reducer

50mm GI Pipe

50mm GI Coupling

50mm GI Bend

50mm GI Elbow

50mm GI Tee

50mm GI Union

50mm GI Hex Nipple

50mm GI Non Return Valve

50mm GM Gate Valve

Laying and jointing of 50mm & 65mm GI Pipes

Cement Concrete 1:4:8 using 40MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Cement Concrete 1:2:4 using 20MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Provision for Water Metre 50mm

Provision for Dirt Box

Erection Charges

Providing Functional House hold Tap Connections for 70 House Holds

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

3. PROVIDING FHTC WITH DISTRIBUTION LINE AT KENDIKARANPATTI IN JALLIPATTI PANCHAYAT

DISTRIBUTION LINE

Provision for CC Road Cutting

90 mm P V C Pipe 6 Ksc

90 mm P V C Bend

90mm PVC Elbow

90 mm P V C Tee

90 mm P V C MTA

80 mm G M Gate valve

Solvent

80 mm G I Pipe

80 mm G I coupling

80 mm GI Bend

80 mm GI Elbow

80mm GI Tee

80 mm GI Union

80 mm flange set

80mm GI Hex Nipple

80mm x 65mm GI Reducer

65 mm G I Pipe

65 mm G I coupling

65 mm GI Bend

65 mm GI Elbow

65mm GI Tee

65 mm GI Union

65 mm flange set

65mm GI Hex Nipple

65mm x 50mm GI Reducer

50 mm G I Pipe

50 mm G I coupling

50mm GI Bend

50mm GI Elbow

50mm GI Tee

50mm GI Union

50 mm flange set

50mm GI Hex Nipple

50mm GM Gate Valve

Earthwork excavation and depositing on bank with n initial lead of 10 M initial list of 2 m. In hard stiff clay, stiff block cotton soil and hard red earth shales, murram, grvelstony earth and earth mixed with small bounders and hard gravely soil

Laying and jointing of 90 mm & 63 mm P V C Pipes

Laying and jointing of 65mm & 50mm G I Pipes

Cutting & Threading of 80mm GI Pipes

Cutting & Threading of 65mm GI Pipes

Cutting & Threading of 50mm GI Pipes

Refilling the excavated soil in the trenches

Cement Concrete 1:4:8 using 40MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Cement Concrete 1:2:4 using 20MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Provision for Water Metre 50mm

Provision for Dirt Box

Erection Charges

Providing Functional House hold Tap Connections for 65 House Holds

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

4. PROVIDING FHTC WITH PUMPING MAIN LINE & DISTRIBUTION LINE AT VEERAJAKKAMMALPURAM IN JALLAIPATTI PANCHAYAT

PUMPING MAIN LINE

80 mm G I Pipe

80 mm G I bend

80 mm GI heavy type coupling

80 mm GM Non return valve

80 mm G M Gate valve

80 mm flange set

80 mm H Nipple

80mm GI Elbow

80mm GI Tee

80mm GI Union

90 mm P V C Pipe 6 Ksc

90 mm P V C Tee

90mm P V C Elbow

90mm P V C Bend

90 mm P V C MTA

Solvent

25mm Single Air Valve

Earthwork excavation and depositing on bank with n initial lead of 10 M initial list of 2 m. In hard stiff clay, stiff block cotton soil and hard red earth shales, murram, grvelstony earth and earth mixed with small bounders and hard gravely soil

Laying and jointing of 90mm P V C Pipes

Refilling the excavated soil in the trenches

DISTRIBUTION LINE

Provision for CC Road Cutting

63 mm P V C Pipe 6 Ksc

63 mm P V C Bend

63 mm PVC Elbow

63 mm P V C Tee

63 mm P V C MTA

50 mm G M Gate valve

Solvent

65 mm G I Pipe

65 mm G I coupling

65 mm GI Bend

65 mm GI Elbow

65mm GI Tee

65 mm GI Union

65 mm flange set

65mm GI Hex Nipple

65mm x 50mm GI Reducer

50 mm G I Pipe

50 mm G I coupling

50mm GI Bend

50mm GI Elbow

50mm GI Tee

50mm GI Union

50 mm flange set

50mm GI Hex Nipple

Earthwork excavation and depositing on bank with n initial lead of 10 M initial list of 2 m. In hard stiff clay, stiff block cotton soil and hard red earth shales, murram, grvelstony earth and earth mixed with small bounders and hard gravely soil

Laying and jointing of 90 mm & 63 mm P V C Pipes

Laying and jointing of 65mm & 50mm G I Pipes

Cutting & Threading of 65mm GI Pipes

Cutting & Threading of 50mm GI Pipes

Refilling the excavated soil in the trenches

Cement Concrete 1:4:8 using 40MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Cement Concrete 1:2:4 using 20MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Provision for Water Metre 50mm

Provision for Dirt Box

Erection Charges

Providing Functional House hold Tap Connections for 71 House Holds

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

5. PROVIDING FHTC WITH DISTRIBUTION LINE AT SAKKARAIPATTI IN JALLIPATTI PANCHAYAT

DISTRIBUTION LINE

Provision for CC Road Cutting

50 mm G I Pipe

50 mm G I coupling

50mm GI Bend

50mm GI Elbow

50mm GI Tee

50mm GI Union

50 mm flange set

50mm GI Hex Nipple

50mm GM Gate Valve

Laying and jointing of 50mm G I Pipes

Cutting & Threading of 50mm GI Pipes

Cement Concrete 1:4:8 using 40MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Cement Concrete 1:2:4 using 20MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Provision for Water Metre 50mm

Provision for Dirt Box

Erection Charges

Providing Functional House hold Tap Connections for 22 House Holds

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

6. PROVIDING FHTC WITH DISTRIBUTION LINE AT SAAVADIPATTI IN JALLIPATTI PANCHAYAT

DISTRIBUTION LINE

Provision for CC Road Cutting

90mm HDPE Pipe PN 6

90mm HDPE Bend

90mm HDPE Tee

6 sqr mm 3 Core Cable

75 mm P V C Pipe 6 Ksc

75 mm P V C Bend

75 mm PVC Elbow

75 mm P V C Tee

75 mm P V C MTA

65 mm G M Gate valve

75mm x 63mm PVC Reducer

63 mm P V C Pipe 6 Ksc

63 mm P V C Bend

63 mm PVC Elbow

63 mm P V C Tee

63 mm P V C MTA

50 mm G M Gate valve

Solvent

50 mm G I Pipe

50 mm G I coupling

50mm GI Bend

50mm GI Elbow

50mm GI Tee

50mm GI Union

50 mm flange set

50mm GI Hex Nipple

Earthwork excavation and depositing on bank with n initial lead of 10 M initial list of 2 m. In hard stiff clay, stiff block cotton soil and hard red earth shales, murram, grvelstony earth and earth mixed with small bounders and hard gravely soil

Laying and jointing of 75 mm & 63 mm P V C Pipes

Laying and jointing of 50mm G I Pipes

Cutting & Threading of 50mm GI Pipes

Refilling the excavated soil in the trenches

Cement Concrete 1:4:8 using 40MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Cement Concrete 1:2:4 using 20MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Provision for Water Metre 50mm

Provision for Dirt Box

Erection Charges

Providing Functional House hold Tap Connections for 44 House Holds

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

7. PROVIDING FHTC, NEW BORE WELL WITH PUMPING MAIN LINE & DISTRIBUTION LINE AT JALLIPATTI IN JALLIPATTI PANCHAYAT

PUMPING MAIN LINE

80 mm G I Pipe

80mm GI Elbow

80 mm G I coupling

Laying and jointing of 80 mm G I Pipes

Provision for Water Meter 50mm Page 81 of TWAD SOR

Provision for Dirt Box

Erection Charges

DISTRIBUTION LINE

Provision for CC Road Cutting

65 MM GI PIPE

65mm GI Bend

65mm GI Coupling

65mm GI Elbow

65mm GI Tee

65mm GI Union

65mm GI Flange Set

65mm Hex Nipple

65mm GM Gate Valve

Supply of 50mm dia GI Pipe for Pipeline works

Supply of 50mm dia GI Coupling

Supply of 50mm dia GI Elbow

Supply of 50mm dia GI Bend

Supply of 50mm dia GI Tee

Supply of 50mm dia GI Union

Supply of 50mm dia GI Flange Set

Supply of 50mm dia GI Hex Nipple

Supply of 50mm dia GM Gate Valve

Labour charges for laying and jointing of GI Pipe and specials as per isi standards

Cutting and Threading of 65mm GI Pipes

Cutting and Threading of 50mm GI Pipes

Cement Concrete 1:4:8 using 40MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Cement Concrete 1:2:4 using 20MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Bore well

Geophysical survey charges ( Minimum 3 Locations)

Drilling of 150 mm dia Bore well in hard rock area inculding labour charges for inserting the casing pipe etc complete.

Over burden soil

Hard rock areas

Supply and delivery of 180 mm dia pvc plain casing pipes 6 KSC

Supply and delivery of three phase 7.5 H P submersible pump set as per IS 8034 with out pannel board having duty condition of 50 LPM x 225 Headsubmersible pump set

Supply and delivery of Three phase pannel board with two level Guard and auto start suitable for 7.5 H P submersible pump set

4 Squr mm 3 core Cable

50 mm G I Pipe

50 mm G I bend

50 mm MS clamp set

50 mm GI heavy type coupling

50 mm GM Non return valve

50 mm G M Gate valve

50 mm flange set

50 mm H Nipple

Bore well steel cover plate

63 A fuze units

7/20 Serivice wire

Labour charges for the errection of 7.5 H P submersible puimp set in the bore well inculding fixing and jointing submersible cable with proper clamps upto the nstarter to required depth and all so fixing of riser pipes to the requied depth valve erection charges etc. comlpete.

Providing Functional House hold Tap Connections for 118 House Holds

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

8. PROVIDING FHTC, NEW BORE WELL WITH PUMPING MAIN LINE & DISTRIBUTION LINE AT A.MEENATCHIPURAM IN JALLIPATTI PANCHAYAT

PUMPING MAIN LINE

80 mm G I Pipe

80 mm G I bend

80 mm GI heavy type coupling

80 mm GM Non return valve

80 mm G M Gate valve

80 mm flange set

80 mm H Nipple

80mm GI Elbow

80mm GI Tee

80mm GI Union

90 mm HDPE Pipe PN 6

90 mm HDPE Bend

90mm HDPE Tee

Solvent

25mm Single Air Valve

Earthwork excavation and depositing on bank with n initial lead of 10 M initial list of 2 m. In hard stiff clay, stiff block cotton soil and hard red earth shales, murram, grvelstony earth and earth mixed with small bounders and hard gravely soil

Laying and jointing of 90mm HDPE Pipes

Laying and Jointing of 80mm GI Pipes

Refilling the excavated soil in the trenches

DISTRIBUTION LINE

Provision for CC Road Cutting

63 mm P V C Pipe 6 Ksc

63 mm P V C Bend

63 mm PVC Elbow

63 mm P V C Tee

63 mm P V C MTA

50 mm G M Gate valve

Solvent

50 mm G I Pipe

50 mm G I coupling

50mm GI Bend

50mm GI Elbow

50mm GI Tee

50mm GI Union

50 mm flange set

50mm GI Hex Nipple

Earthwork excavation and depositing on bank with n initial lead of 10 M initial list of 2 m. In hard stiff clay, stiff block cotton soil and hard red earth shales, murram, grvelstony earth and earth mixed with small bounders and hard gravely soil

Laying and jointing of 63 mm P V C Pipes

Laying and jointing of 65mm & 50mm G I Pipes

Cutting & Threading of 50mm GI Pipes

Refilling the excavated soil in the trenches

Cement Concrete 1:4:8 using 40MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Cement Concrete 1:2:4 using 20MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Provision for Water Metre 50mm

Erection Charges

Dirt Box

Bore well

Geophysical survey charges ( Minimum 3 Locations)

Drilling of 150 mm dia Bore well in hard rock area inculding labour charges for inserting the casing pipe etc complete.

Over burden soil

Hard rock areas

Supply and delivery of 180 mm dia pvc plain casing pipes 6 KSC

Supply and delivery of three phase 7.5 H P submersible pump set as per IS 8034 with out pannel board having duty condition of 50 LPM x 225 Headsubmersible pump set

Supply and delivery of Three phase pannel board with two level Guard and auto start suitable for 7.5 H P submersible pump set

4 Squr mm 3 core Cable

50 mm G I Pipe

50 mm G I bend

50 mm MS clamp set

50 mm GI heavy type coupling

50 mm GM Non return valve

50 mm G M Gate valve

50 mm flange set

50 mm H Nipple

Bore well steel cover plate

63 A fuze units

7/20 Serivice wire

Labour charges for the errection of 7.5 H P submersible puimp set in the bore well inculding fixing and jointing submersible cable with proper clamps upto the nstarter to required depth and all so fixing of riser pipes to the requied depth valve erection charges etc. comlpete.

Providing Functional House hold Tap Connections for 138 House Holds

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

9. PROVIDING FHTC WITH DISTRIBUTION LINE AT BOMMINAICKANPATTI IN JALLIPATTI PANCHAYAT

DISTRIBUTION LINE

Provision for CC Road Cutting

63 mm P V C Pipe 6 Ksc

63 mm P V C Bend

63 mm PVC Elbow

63 mm P V C Tee

63 mm P V C MTA

50 mm G M Gate valve

Solvent

50 mm G I Pipe

50 mm G I coupling

50mm GI Bend

50mm GI Elbow

50mm GI Tee

50mm GI Union

50 mm flange set

50mm GI Hex Nipple

Earthwork excavation and depositing on bank with n initial lead of 10 M initial list of 2 m. In hard stiff clay, stiff block cotton soil and hard red earth shales, murram, grvelstony earth and earth mixed with small bounders and hard gravely soil

Laying and jointing of 63 mm P V C Pipes

Laying and jointing of 65mm & 50mm G I Pipes

Cutting & Threading of 50mm GI Pipes

Refilling the excavated soil in the trenches

Cement Concrete 1:4:8 using 40MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Cement Concrete 1:2:4 using 20MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Provision for Water Metre 50mm

Erection Charges

Dirt Box

Providing Functional House hold Tap Connections for 21 House Holds

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

10. PROVIDING FHTC, NEW BORE WELL WITH PUMPING MAIN LINE & DISTRIBUTION LINE AT MELAKAMAKKAPATTI IN JALLIPATTI PANCHAYAT

PUMPING MAIN LINE

80 mm G I Pipe

80 mm G I bend

80 mm GI heavy type coupling

80 mm GM Non return valve

80 mm G M Gate valve

80 mm flange set

80 mm H Nipple

80mm GI Elbow

80mm GI Tee

80mm GI Union

90 mm HDPE Pipe PN 6

90 mm HDPE Bend

90mm HDPE Tee

6sqr mm 3 Core cable for Open Well

Solvent

25mm Single Air Valve

Earthwork excavation and depositing on bank with n initial lead of 10 M initial list of 2 m. In hard stiff clay, stiff block cotton soil and hard red earth shales, murram, grvelstony earth and earth mixed with small bounders and hard gravely soil

Laying and jointing of 90mm HDPE Pipes

Refilling the excavated soil in the trenches

DISTRIBUTION LINE

Provision for CC Road Cutting

63 mm P V C Pipe 6 Ksc

63 mm P V C Bend

63 mm PVC Elbow

63 mm P V C Tee

63 mm P V C MTA

50 mm G M Gate valve

Solvent

50 mm G I Pipe

50 mm G I coupling

50mm GI Bend

50mm GI Elbow

50mm GI Tee

50mm GI Union

50 mm flange set

50mm GI Hex Nipple

Earthwork excavation and depositing on bank with n initial lead of 10 M initial list of 2 m. In hard stiff clay, stiff block cotton soil and hard red earth shales, murram, grvelstony earth and earth mixed with small bounders and hard gravely soil

Laying and jointing of 63 mm P V C Pipes

Laying and jointing of 50mm G I Pipes

Cutting & Threading of 50mm GI Pipes

Refilling the excavated soil in the trenches

Cement Concrete 1:4:8 using 40MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Cement Concrete 1:2:4 using 20MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Provision for Water Metre 50mm

Erection Charges

Dirt Box

Bore well

Geophysical survey charges ( Minimum 3 Locations)

Drilling of 150 mm dia Bore well in hard rock area inculding labour charges for inserting the casing pipe etc complete.

Over burden soil

Hard rock areas

Supply and delivery of 180 mm dia pvc plain casing pipes 6 KSC

Supply and delivery of three phase 7.5 H P submersible pump set as per IS 8034 with out pannel board having duty condition of 50 LPM x 225 Headsubmersible pump set

Supply and delivery of Three phase pannel board with two level Guard and auto start suitable for 7.5 H P submersible pump set

4 Squr mm 3 core Cable

50 mm G I Pipe

50 mm G I bend

50 mm MS clamp set

50 mm GI heavy type coupling

50 mm GM Non return valve

50 mm G M Gate valve

50 mm flange set

50 mm H Nipple

Bore well steel cover plate

63 A fuze units

7/20 Serivice wire

Labour charges for the errection of 7.5 H P submersible puimp set in the bore well inculding fixing and jointing submersible cable with proper clamps upto the nstarter to required depth and all so fixing of riser pipes to the requied depth valve erection charges etc. comlpete.

Providing Functional House hold Tap Connections for 116 House Holds

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Ujwala Infratech (India) Pvt. Ltd.,