RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate Bid to RA enabled Yes Watermist And Caf Fire Extinguisher High Pressure Back Pack Type ( 70 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Genric "Conformity to EN 3-7:2004+A1:2007-0 8 standards " The complete system shall be tested for compliance from an int ernationally/nationally accredited laboratory for compliance to all 30 clauses (3.2
Required3.15
Required4.2
Required4.3
Required4.4
Required4.5
Required6.1
Required6.2
Required6.3
Required7.1.1
Required7.1.2
Required7.2
RequiredThe complete system shall be tested for compliance from an int ernationally/nationally accredited laboratory for compliance to all 30 clauses (3.2
Required3.15
Required4.2
Required4.3
Required4.4
Required4.5
Required6.1
Required6.2
Required6.3
Required7.1.1
Required7.1.2
Required7.2
Required1/8 7.3
Required7.4
Required8.1
Required8.2
Required9.2
Required10.1
Required10.2
Required10.3
Required10.4
Required10.5
Required10.6.1 & 10.6.2
Required14.1
Required14.2
Required15.2
Required15.3
Required16.1
Required16.2) of EN 3 - 7:2004 + Al: 2007-08 (E) Standard mandatorily applicable for the complete system 7.3
Required7.4
Required8.1
Required8.2
Required9.2
Required10.1
Required10.2
Required10.3
Required10.4
Required10.5
Required10.6.1 & 10.6.2
Required14.1
Required14.2
Required15.2
Required15.3
Required16.1
Required16.2) of EN 3 - 7:2004 + Al: 2007-08 (E) Standard mandatorily applicable for the complete system Mounting type Backpack * Configuration ( Shall be mounted on a sturdy frame suitably cushioned for comfort
Requiredprovided with shoulder pads for carrying as a backpack and a handle to be carried by hand. All materials used shall be of fire retardant type. Backpack shall be supplied with two air cylinders.) Yes * Model Number as per Accredited Laboratory Test Report to Be declared - * Main Components: Pressure vessel to hold the media with safety valve
Requiredcompressed air cylinder coupled with a reducer
Requiredhose pipes for discharge of water mist media
Requiredextinguishing gun. Yes * Constructional Air Cylinder Material Ultralight Carbon composite with PET Liner Ultralight Carbon composite with PET Liner Type of Foam Special AFFF Compound conforming to manufacturer own specifications for higher fire rating A55
RequiredB233
RequiredSpreading coefficient for special AFFF Compound shall be +5 minimum
Requiredconcentration shall be 6%. Special AFFF Compound conforming to manufacturer own specifications for higher fire rating A55
RequiredB233
RequiredSpreading coefficient for special AFFF Compound shall be +5 minimum
Requiredconcentration shall be 6%. If special foam mention the composition for special
Requiredotherwise put - * 2/8 NA Commercial Brand Name of the Special foam (fire extinguishing medium) as per accredited laboratory test report wherein higher fire ratings i.e A55
RequiredB233
RequiredE1000 V (Die Electric Suitability) achieved
Requiredto be declared.Write NA if not applicable. - * Characteristics of extinguishing medium of Special AFFF Compound (manufacturer own specifications) with infrared spectrogram to be furnished.NA if not applicable - * Pressure Vessel Material & Capacity (Nominal Charge) Corrosion Free Aluminum alloy vessel of 10 litre capacity . Corrosion Free Aluminum alloy vessel of 10 litre capacity . Minimum wall thickness of pressure vessel (mm) 5 * Extinguishing gun material Stainless Steel * if others Mentions the material for Extinguishing gun
Requiredotherwise put NA - * Extinguishing gun weight (750 grams approx) 750 * Length of EN marked Hose 1.3 meter for backpack system Yes * Weight of fully charged Backpack system between 25kg to 27kg having Corrosion Free Aluminum Alloy vessel and below 20 kg having Ultralite Carbon Composite with PET Liner Vessel for 25.9 * performance Air Cylinder Capacity (Ltrs) 2 * 3/8 Air Cylinder pressure (Bar) 300 * High Pressure Type (Dynamic Operating pressure to be tested in the accredited laboratory test report which will be considered as high pressure for as per clause No. 3.15 of EN 3 - 7:2004 + Al: 2007-08 (E) Standard.) ≥ 30 for Aluminium vessel
Required≥ 35 for Ultralight Carbon composite with PET Liner vessel (Bar) 30 * Lancing Distance of Gun : More than 12 meter (meter) 12 * The air hoses shall be suitable for minus 40 deg C to 100 Deg C temperature and EN mark on hose Yes * Minimum operating time in full throttle for aluminium alloy vessel - * Minimum operating time in full throttle for Ultralight Carbon composite with PET Liner vessel - * System shall be designed for maximum operating temperature TS max and minimum operating temperature TS min of 60 deg C or more and 5 Deg C or less respectively and certified by the manufacturer accordingly as per Clause 7.4 of EN 3-7:2004+A1:2007-08 standards as per the accredited test report for backpack system. Yes * Fire Rating 55 A
Required233B
Required1000V with Special AFFF Compound as per manufacturer own 55 A
Required233B
Required1000V with Special AFFF Compound as per manufacturer own 4/8 specn specn Certification PED approval as per Directive 97/23/EC Yes * Pressure Vessel shall include a pressure gauge fitted on the vessel (CE Marked from notified body). Yes * No objection certificate (NOC) for Pressure Vessel from Petroleum and Explosives Safety Organization (PESO) Nagpur Yes * Pressure Vessel should have CE Marking from Notified body Yes * The air cylinders shall have PESO
RequiredNagpur approval yes * Specific consent of the OEM for the value additions made along with a confirmation that fire ratings of the equipment would not be affected by these value additions. Yes * Test Report No - * Test Report Date - * Name of ILAC/NABL/Central Govt.Accredited Laboratory where Test Conducted - * NOC Letter No. Date of PESO Nagpur for Pressure Vessel - * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
