Construction of samudya bhavan in survey no 130 devaraj nagara at ward no 54 old ward no 41

Construction of samudya bhavan in survey no 130 devaraj nagara at ward no 54 old ward no 41

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.Vo...

Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth re...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates The granite/trap/basa...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Additionalities for Formwork,centering & Scaffolding : Columns (70%) Appendix -1 SL NO.8 Vol-1 Pg No 115

Additionalities for Formwork,centering & Scaffolding : Beams& lintels of Building (60%) Appendix -1 SL NO.12 Vol-1 Pg No 115

Additionalities for Formwork,centering & Scaffolding : Roof slab of building (50%) Appendix -1 SL NO.13,14 Vol-1 Pg No 115

Additionalities for Formwork,centering & Scaffolding : chejjas, canopy & other Architectural projections of minor sections (45%) Appendix -1 SL NO.20 Vol-1 Pg No 115

Supplying, Fitting and Placing TMT Fe 550 Reinforcement in Foundation / Substructure /

Superstructure complete as per Drawing and Technical Specifications.Vol 03, Pg No-71 Item No-9.3

Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement: 4 coarse sand) including cost of all materials, labour, sca...

Finishing walls with Acrylic Smooth exterior paint of required shadeNew work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ anglesections, of approved make conforming to IS : 733 in frames of false ceiling i...

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of...