Construction of Collectorate building at Sambalpur, Phase-II.

CIVIL WORK Earthwork in excavation in all types of soil for site leveling, foundation, pits, trenches and other civil works upto and including 1.5 metre lift and stacking the soil upto a lead of 100 metre and including dewatering, removing slush,shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge. ROAD

DRAIN

COMPOUND WALL

GATEWAY

Filling at all depth with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 15cm in depth: consolidating each deposited layer by ramming and watering complete (lead upto 100m) as directed by the Engineer-In-charge. ROAD

DRAIN

COMPOUND WALL

GATEWAY

Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. ROAD

DRAIN

COMPOUND WALL

GATEWAY

Cement concrete of proportion (1:4:8) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer-in-charge. DRAIN

COMPOUND WALL

GATEWAY

Fly Ash brick masonry in cement mortar (1:6) in foundation & plinth using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge. COMPOUND WALL

GATEWAY

Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royalties of all materials with all labour,labour cess and T & P required for the work complete in all respect as per direction of Engineer-in-Charge. COMPOUND WALL

GATEWAY

Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. DRAIN BASE

COMPOUND WALL

GATEWAY

GATEWAY

DRAIN WALL

COMPOUND WALL

COPING BEAM

GATEWAY

COMPOUND WALL

COPING BEAM COMPOUND WALL

PLINTH BEAM COMPOUND WALL

GATEWAY

DRAIN SLAB

SLAB GATEWAY

Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding, wastage & over lapping and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge. DRAIN

COMPOUND WALL

GATEWAY

Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MOSRT&H Specifications for Road & Bridge works (4th Revision) ROAD

Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018. ROAD

Supplying & fixing of pre cast kerb stone of size 600mm x 300mmx150mm of M-30 grade of approved make desgin ,colour & size made by block making machine with proper compaction fixed in required pattern etc.complete in all respect conforming to IS 5758:1984. ROAD

Supplying, fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame. shutters and all Fitting and fixtures etc. complete as per direction of Engineer-in-charge (Make-FENESTA/ Koemmerling/ Saint Gobain/ Prominance) BASEMENT FLOOR

TERRACE FLOOR

GATEWAY

Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge. BASEMENT FLOOR

TERRACE FLOOR

COMPOUND WALL

GATEWAY

Ventilator Casement window single panel with or without fixed panel with S.S. 304 friction hinges as per size and weight of sash, single point locking zinc alloy (zamak) powder coated handles.DSR VOL-I, SL NO-9.147.D1 ,Page no-660. Using R1 serieswith frame (33mm&above)x (35mm&above) & sash/ mullion (33mm& above) x (50 mm & above). (Height upto 0.90 metre). BASEMENT FLOOR

Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. COMPOUND WALL

GATEWAY

Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. GATEWAY

Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. GATEWAY

Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge. (Make: Asian/ Berger/ Dulux/ Nerolac or equivalent make duly approved by Engineer-in-Charge). BASEMENT FLOOR

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

TERRACE FLOOR

COMPOUND WALL

GATEWAY

Wall painting two coats with Antifungal weather coat paint (1st quality) exterior grade of approved make & approved shade over a coat of primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge. (Make: Asian/ Berger/ Dulux/ Nerolac or equivalent make duly approved by Engineer-in-Charge). BASEMENT FLOOR

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

TERRACE FLOOR

GATEWAY

Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make (JK White/ Birla white or equivalent make duly approved by Engineer-in-Charge) and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. (Internal Surface) BASEMENT FLOOR

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

TERRACE FLOOR

Painting two coats with plastic emulsion paint with a approved quality primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge. (Make: Asian/ Berger/ Dulux/ Nerolac or equivalent make duly approved by Engineer-in-Charge). (Internal Surface) BASEMENT FLOOR

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

TERRACE FLOOR

COMPOUND WALL

GATEWAY

Painting two coat with approved synthetic enamel paint to new wood & iron work over a coat of Red oxide primer including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. (Make: Asian/ Berger/ Dulux/ Nerolac or equivalent make duly approved by Engineer-in-Charge). BASEMENT FLOOR

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

TERRACE FLOOR

COMPOUND WALL

GATEWAY

VDF FLOORING:- Providing and laying C.C. pavement of mix M-25 ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). BASEMENT FLOOR

GROUND FLOOR

Waterproofing of Retaining wall:- Surface shall be grinded to remove all loose contamination, all tie rod holes shall be cut keeping 25mm depth and sealing the same with cement sand mortar admix with Rearm bond SBR 45 @ 10% of the cement weight. BASEMENT FLOOR

All construction joint shall be cut in V groove and sealing the same with cement sand mortar admix with Rearm bond SBR 45 @ 10% of the cement weight. BASEMENT FLOOR

Providing and laying Aquaarm SBS 3000X - SBS membre with cross laminated HDPE after application of single coat Aquaarm Tar primer over the prepared retaining wall. The membrane shall be terminated 100mm below from the top level with aluminium strip sealing with PU sealant. The membrane will have the following technical parameters: Tensile Strength : 220 Longitudinal 50 N/mm2 and 225 Tranversal 50N/mm2,. Elongation at break : 325% , Adhesion To concrete: >2 N/mm2.N.B. For Appliaction of SBS membrae is applied in retaining wall Dimple board is required. After Dimple board fixing Sand filling will be in Contractor scope. BASEMENT FLOOR

Protection with Dimple board: Providing and fixing 8mm dimple board over the SBS membrane using double sided tape at an interval of required space as protection layer before filling of earth. Precution shall be taken during laying of earth so that the dimple board shaould not fall dowm. BASEMENT FLOOR

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-incharge. Size of Tile 1000x1000 mm. GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

Supplying, fitting and fixing Anti-skid Mat finished Glazed vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Color / Printed series (Homogenous) of approved make (JOHNSON / SOMANY/ KAJARIA/ RAK) in floors on 20mm thick bed of C.M. (1:4)(1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tileincluding cost of all materials, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge. GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

Supplying, fitting and fixing vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Plain (Ivory) of approved make (JOHNSON / SOMANY/ KAJARIA/ RAK) in floors on 20mm thick bed of C.M. (1:4)(1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tileincluding cost of all materials, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge. GATEWAY

Providing, fitting, fixing vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Plain (Ivory) of approved make (JOHNSON / SOMANY/ KAJARIA/ RAK) as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials all labour,labour cess complete in all respects. GATEWAY

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-incharge. GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

Providing and fixing Ist quality Glazed vitrified tiles polished finish wall tiles conforming to IS: 15622 of size 600mm x 1200mm Plain (Ivory) of approved make (JOHNSON / SOMANY/ KAJARIA/ RAK) (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Referance from . GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

Fixing granite tiles of approved dimension area above 0.4 sqm (20mm thick) in floor, treads of steps and landing on 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials complete in all respects as per direction of Engineer-in-Charge. BASEMENT FLOOR

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

GATEWAY

WOODEN FLOORING:- Providing and laying in position 10.5mm thick Bruce Engineered wood Flooring of approved shade of size 1820mm x 190mm having smart lock tongue and groove joints to secure long lasting joint. The material comprising of three layers, Top layer is of genuine hardwood surface, the middle layer is of pine or spurce ribs laid transversely and the third layer is stabilizing bottom layer. The floor is finished on top with three course of formaldehyde free oil or five course of UV curved formaldehyde free lacquer. The boards are installed on foam and plastic on top of the under floor and stuck to one another using adhesive in the groove of the board all complete including all accessories (corner beading, Door sill) FIRST FLOOR

Providing 2.5cm thick A.S. Flooring with cement concrete (1:2:4) using 12mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of floor and punning including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge. SECOND FLOOR

Providing and laying of green certified carpet tiles thickness more than 5.5mm size 50X50 cm with nylon content of 100% Tufted Textured loop pile, manufacturer using latest dyeing technology. The backing has to be non pvc backing. Tufted Pile Weight Standard 14.8 oz. per sq. yd. with antistatic, thermal resistance , sound insulation & sound absorption properties. Carpet to have fire resistance of Cfl-s1 and suitable for allergies. The product has to be 100% recyclability with Environmental product declaration & material health statement certificate for sustainability. The product should have CRI green certified product. Rates including complete installation with backing foam, necessary stitching etc. The floor which receives the carpet to be thoroughly cleaned as per manufacturers specification. The carpet is to be laid over a bed of manufacturers approved adhesive spread evenly over the entire floor. The rate shall include cutting, trimming, fixing and clearing away of residual material to a location as directed. The rate shall also include supplying and laying of a protective layer in PVC or HDPE sheet of 500 microns thickness, held together with scotch tape. The laid carpet to be vacuumed after the removal of protective cover / on commissioning. If after the protective layer is removed and stains observed in the carpet because of inadequate protection, the same shall be shampooed and made good to the satisfaction of the project managers. FIRST FLOOR

Supplying and Laying MAKE IN INDIA broadloom carpet of having following specifications.. Made up from 100% Nylon 6 Cut Pile , Digitally injection Printed having Pile Height of 7.5 mm with Total Height of 9.5 mm . should have been Stitched 37 times / 10 cm with Pile Weight Not less than 1000 GSM and total weight of 2200 GSM. The Carpet should have a Primary Backing of PP Woven and Secondry Backing of PP Mesh with Gauge of 1/8 Cut Pile of Latex Natural Rubber. The carpet should be Color fastness to LightTest Method as per AATCC 16 standard ≥ 4.0 at 80 Hours . Also should have passed Static Electricity Test Method: AATCC 134 Less than 3.5 KV & Hexapod test Method: ASTM D 5252 ≥ 4. It should be confining to Anti Flammable,Anti Bacterial & Anti Microbial Test Method: ASTM E 648 ≥ 0.45 . The carpet to be supplied should be manufactured as per Green Pro, LCA EPD , CE Marking , NSF 140 standards and the manufaturing unit should be confining to UGBC , ISO 9001, ISO 14001 and ISO 45001 standards.The carpet to be laid as per the manufacture's specification and to be laid by its authorized agency or as Approved , with minimum 5 Years warranty from Manufacturer for any manufacturing defects . After laying carpet to be covered with transperent polythene to protect from dust,adhesive , colouring work at site The carpet shall be complete as per drawing & specifications of the EIC. SECOND FLOOR

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. (Make-Green Land / Century/ Alstone) GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

Dressed seasoned sal wood work framed and fixed in frames of doors & windows including cost,conveyance of all materials and cost of labour for fitting, fixing etc.complete as per the instruction of Engineer-in-Charge . GATEWAY

Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge. GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

GATEWAY

WOODEN FLOORING:- Providing and laying in position 10.5mm thick Bruce Engineered wood Flooring of approved shade of size 1820mm x 190mm having smart lock tongue and groove joints to secure long lasting joint. The material comprising of three layers, Top layer is of genuine hardwood surface, the middle layer is of pine or spurce ribs laid transversely and the third layer is stabilizing bottom layer. The floor is finished on top with three course of formaldehyde free oil or five course of UV curved formaldehyde free lacquer. The boards are installed on foam and plastic on top of the under floor and stuck to one another using adhesive in the groove of the board all complete including all accessories. SECOND FLOOR

Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinf. and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charg DSR VOL-I, SL NO-9.147 ,Page no-627. GROUND FLOOR

SECOND FLOOR

THIRD FLOOR

Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener to be paid for separately). FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/sqm) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 60 minutes of fire resistance both integrity & radiation control (EW60) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm. FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. FIRST FLOOR

Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conformingtoIS:3614(Part-II), tested and certified as per laboratory approved by Engineer-in- charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

Providing, assembling and supplying vision glass panels (IGUs) comprising of hermeticallysealed 6-12-6 mm insulated glass vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face #2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

Fixed Glass:- Providing and fixing 12 mm thick frame less toughened glass partition Dorma premium (911298) PT 80 Glass to glass connector with silicone, 12mm clear toughened glass with cutout and hole,including perimeter sealing of glass to glass joints with silicon sealant,etc, as per drawing and specification including the cost of all materials,T&P,etc all complete as per the direction of Engineer-in-charge. GROUND FLOOR

FIRST FLOOR

THIRD FLOOR

Ventilator Casement window single panel with or without fixed panel with S.S. 304 friction hinges as per size and weight of sash, single point locking zinc alloy (zamak) powder coated handles.DSR VOL-I, SL NO-9.147.D1 ,Page no-660. Using R1series with frame (33mm & above) x (35mm & above) & sash/ mullion (33mm & above) x (50 mm & above). (Height upto 0.90 metre). GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

TEXTURE PAINT:- Providing and applying two coats unitile's Royal/Rivera make in approved shade on a smooth cement sand plaster. The composition of the texture paint should consist of Acrylic Copolymer Resigns combined with Quartz, Silica,mineral aggregates, synthetic inorganic pigments, bactericide, fungicides and various other additives,giving the product water repellant properties. The first coat to be applied by brush or wool roller as a base coat, diluted with sufficient water and the final coat applied undiluted with trowel and then finished with acrylic trowel to obtain the specified grooves.The thickness of both coats dhould be 1.0 to 1.5 mm. The water repellency of the product is 86gm/m2 as per test method IS: 5410-1969. GROUND FLOOR

FIRST FLOOR

SECOND FLOR

THIRD FLOOR

STRUCTURAL GLAZING SUB FRAME:- Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment. GROUND FLOOR

FIRST FLOOR

SECOND FLOR

THIRD FLOOR

MS STEEL STRUCTURE- Supplying, Providing, Fabricating, Assembling, hoisting, erecting and placing in position MS Built-up section/ Tubular Structure (MS) confirming to IS 2062 Grade Yst 250-350, Tubular Structure:- made from steel hollow sections, ISI marked from SAIL/ RINL/ TATA/ JINDAL, confirming to IS 1161/4923, Grade Yst 310, thickness upto 10mm) in the profile shape as per drawings with special plate connector, pinion joints, Plates, hollow sections, etc and applying a coat of epoxy primer, and including Preparation of detailed fabrication and erection drawings of Structural steel work from design drawings issued by Engineer- in- charge and incorporation of Engineer-in-Charge’s comments on same, transportation from fabrication yard, cutting, threading, machining, leads and lifts upto all heights, tools and plants and necessary scaffolding etc. required for all operations involved to make structure of Metal sheet roofing .The tubular structure system with plate connectors, pinion joints, etc must be sustained up to 280 km/hour wind pressure. The structure has to be provided as per conceptual drawings of metal shade. TERRACE FLOOR

GATEWAY

POLYCARBONATE SHEET ROOFING:- Supplying, providing & fixing of multi walled polycarbonate sheet cover of 12 mm thick of required color at the top of the structure of required diameter and height. The jointing at the junction of sheet to be done with powder coated aluminium joint profile having necessary accessories like sealing strip, end cap, stopper, fastener, joiner, screws etc of required thickness. The aluminium profile to be fixed using self drilling SS screws & the profile edges to be sealed using weather silicon. Rate includes Transport to the site and installation with all accessories, screws etc complete as per the design approved by the Engineer-in-Charge. TERRACE FLOOR

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:(b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/ structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

GLASS :- Providing, assembling and supplying vision glass panels (IGUs) comprising of hermeticallysealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. GROUND FLOOR

FIRST FLOOR

SECOND FLOR

THIRD FLOOR

Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- in-Charge. GROUND FLOOR

FIRST FLOOR

SECOND FLOR

THIRD FLOOR

Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi -rigid, inorganic, non-combustible fibre glass wool insulation 50 mm thick, conforming to IS: 8183 and BS: 3958 Part 5. The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non-woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm /sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete. GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

SPANDREL GLASS PANELS :- Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineerin- Charge. For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevent Item*).“(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 K etc. . The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

GLASS RAILLING IN CUTOUT -: Providing and fixing of glass railing using 10 mm Clear toughened glass and 40x40mm balustrades ( Grade 304 ) with point fixtures to hold the glass. The balustrades positions are derived at 1200 from c/c with glass height taken as 950 mm . The entire balustarde will be of height of 1200mm from smapul ply fixing point and 50 mm dia stainless steel (Grade-304) pipe use in top site. The rate include cost of all material, labour,conveyance etc for site. SECOND FLOOR

THIRD FLOOR

GFRC Cornice :- Supplying, Providing and Installation of GFRC CORNICE/ MOULDING (Glass Fiber Reinforced Concrete), Make “TRIVENI, SAMUDYAM”, with where fixing to be done Pattern, design, and colour of approved make to be fixed on/between RCC /Block work Column or structural work with Dry Fixing method with appropriate MS Structural & Cleats frame work, using fasteners, and necessary hardware etc. The element shall be made from '53 grade' Portland Cement make Birla/ 'JK Cement' or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass fibre make 'Owens Corning' or equivalent, Super plasticizers / Additives make by 'BASF' or equivalent, Polymers make 'BASF' or equivalent and U.V resistant Synthetic inorganic pigments shall be used for pigmentation make 'BAYFERROX (Germany)' or equivalent. The material casting shall take place in Synthetic Rubber / FRP Mould manufactured by Mould / Tool / Mould Grade Resin of Revex/ 'Reckli' or equivalent. GROUND FLOOR

MCM CLADDING :- Supply of MCM Modified Clay Material ‐ MCM Slate Sunnye ‐ 1200 x 600 mm , thickness 2.5mm to 3mm PHOMI make, as per company standard dimension, pattern, colour as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation ‐ Class A— ASTM E84‐ 15. The product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and substrate and per directions of Engineer in-charge. Grouting should be done using filling and pointing method as per installation drawing provided, and colour of the grout should be as per the architect’s specification depending on the substrate and as per the direction of Engineer in-charge. GROUND FLOOR

GATEWAY

TOILET WATER PROOFING:- Surface Preparation Cleaning all concrete surfaces free of laitance, dust, dirt, cavities, projecting nibs etc.by grinder and wire brush. Grease should be cleaned using a chemical degreaser and washed with clean water and allowed to dry. Remove all protrusions from concrete surfaces using a fine hair broom finish. Remove moss and lichen manually and treat the surface with a fungicide. Wash the surface thoroughly with clean water and allow it to dry. Standing water must be removed to prevent subsequent compromise of waterproof properties. Surface should be absolutely dry before application of Water proffing. The surface should be grinded to remove contaminants, laitance and weak concrete, so as to have a sound concrete surface with adequate profile, including cost of all material, Labour, T&P etc all complete as per direction of Engineer In Charge. GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

TERRACE FLOOR

Nozzle Grouting at Construction Joints: Nozzle grouting to be done with cement slurry admixed with expanding grout admixture Cebex 100. Cebex 100 to be mixed @225 gm per bag of cement after ponding test for 72 hours. GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

Expansion joint Treatment- Supplying and fixing of elastomeric membrance of 200mm x 2mm size for expansion joint sealing from approved manuefacturer, fixing with epoxy adhesive of approved quality complete. GROUND FLOOR

Supply and apply 1 mm thick aluminium plate of required width for protection of TPE membrane as per manufacturrar’s specification and satisfaction of EIC. (200 mm width) GROUND FLOOR

Sealing the cracks cutting V groove of 12mm x 15mm and sealing the same with cement : sand 1:4 admix with Rearm Bond SBR45 @ 10% of the cement weight. Then fixing of nozzles along the cracks and all other areas. Injection of cement slurry admix with Armgrout Additive @ 250gm per bag of cement and Tufcrete - @ 10% of the cement weight. TERRACE FLOOR

Sealing the cracks cutting V groove of 12mm x 15mm and sealing the same with rearm bond Uw - epoxy sealant. Then fixing of 12mm dia NRV packer along the cracks and other are leakage area and injecting Arm Grout EPLV- low viscous epoxy grout till the refusal of grout pump. TERRACE FLOOR

Bore Packing (4"-8") Providing necessary formwork for packing the bore using suitable arrangement (depending upon site conditions). Applying a coat of styrene- butadiene based polymer coating using Latex. Packing the gap using non-shrink cement polymer based grout up to the surface of the bore whilst the Latex is in tacky state seal the Bore with polyurethane Sealant, ,including cost of all material, Labour, T&P etc all complete as per the direction of Engineer in charge. TERRACE FLOOR

Polyurethene(PU) Coating of 1.5mm thick Provindin & applying the surface with primer & Providing two coats of liquid applied, solvent-free elastomeric water proofing membrane, shall be made of hydrocarbon free polyurethane with at least 85% solid content Nitoproof 600PF with necessary surface preparation, coving, primer etc. The waterproofing membrane shall be terminated on the top of parapet walls. including cost of all material, Labour, T&P etc all complete as per the direction of Engineer in charge. TERRACE FLOOR

PUF Spary Insulation System Providing and applying 50 mm thick two component,HFC blown, free from CFC/HCFC polyurethane based sprayable rigid foam system closed-cell type, designed to meet insulation requirements in roof applications. Standard Compliance: IS 12432-3 (2002): Application of Spray Applied Insulation - Code of Practice, Part 3: Polyurethane/Polyisocyanurate [CHD27: Thermal Insulation] Type-1 foam as per Table-1 of ASTM D 7425 TERRACE FLOOR

Geo Fabric Membrane Providing and laying Geo fabric Membrane 150 Gsm, non woven, 100% polyester of thickness 1 to 1.25 mm to act as separation layer before screed concrete including cost of all material, Labour, T&P etc all complete as per the direction of Engineer in charge. TERRACE FLOOR

Grading Concrete (1:1:2) mm thick Providing and applying protective Grading concrete of avg 50 mm thickness above Geo fabric membrane The concrete shall be admixed with intergal based water proofing and finishing surface suitably, curing, cleaning, testing etc. The concrete shall be cut with paneel the 2m x 2m up to depth 1/3 th of depth and the groove shall be filled with Polyurethene sealant including cost of all material, Labour, T&P etc all complete as per the direction of Engineer in charge. TERRACE FLOOR

INTERIOR WORKS Providing & Fixing of Fibre Glass Acoustical Suspended Ceiling (600MMX600MM) 90 Edge Tiles with 15mm face exposed grid. The tiles shall have smooth laminated visual with Humidity Resistance (RH) of 95%, NRC 0.85 – 0.95(Average value of Absorption Co-efficient readings taken at as per ASTM C423 standard, , Light Reflectance ≥88% as per ASTM E-1477, Colour Pebble White, Fire Performance of Class 0/1 as per BS 476 Part 6/7 with 20/25mm Square Tegular/Microlook 90˚ edge and 8mm drop in module size of 600 x 600mm. It shall be suitable for Green Building application, with Recycled content of 85%. SECOND FLOOR

Providing and fixing False ceiling as per Saint Gobain Specifications made of standard G.I. Sections and 12mm thick gyp board sheets inclusive of all hangers, edge members and other clips complete, with sheets fixed with proper Philip fastner by power drills and joints duly finished ensuring level in line, complete with putty, primer and painting of approved make and colour. Cost includes cutouts for electrical fittings, materials, labour, T&P etc complete as per direction of the Engineer-in-charge. (GROUND, FIRST, SECOND, THIRD FLOOR)

PARTITION WALL: Supplying and fixing of double skin wall paneling made of aluminum anodised section framing conforming to standard Aluminium sections as horizontal and vertical members with atleast 600mm c/c with 9mm thick BWR block ply and 4mm thick veneer finished with melamine polished on both the face complete . (FIRST, SECOND, THIRD FLOOR)

GLASS PANELS: 5.0 mm thick glass panels (weight not less than 12.50 kg/sqm). ( DAR-2023 Vol-1 (pg-454 ) SL NO-9.7.7.2 (FIRST, SECOND, THIRD FLOOR)

WALL PANELLING WITH VEENER.: Supplying and fixing of wall paneling made of aluminum anodised section framing conforming to standard Aluminium sections as horizontal and vertical members with atleast 600mm c/c and fixing of 9mm thick BWR ply with 4mm thick veneer pasting finished with melamine polishing complete . (FIRST, SECOND FLOOR)

SLATS IN WALL PANELLING: Supply & installation of Slats in wall panelling are made of pinewood E1 grade fiberboard, Melamine laminated finish, groove perforated slats L16-3/L23-3/L32-3/Customized - (3mm grooves Slats @16mm centres) back lined with black acoustical fleece, tongue-groove edge for a seamless look, of size 192 & 128x2440x15/17mm thick having base density 700Kg – 800 Kg/m3, weight 12Kgs/m2 installed by using GI strut system. The GI strut system includes GI Cross channel having thickness 0.45mm, length 3600mm, knurled web 40mm, depth 10mm and equal flanges 15mm is fastened vertically/horizontally at every 600mm centres. Aluminium core cross channel (CC18) having thickness 0.5mm, length 2400mm, web 15mm & 27mm, depth 18mm and flanges of 7mm with suitable edge & centre brackets is then fixed perpendicular to the CC25with the help of fasteners at every 400mm centres. Slats of size 192 & 128x 2430x15/17mm in then fixed perpendicular to CC18 with suitable edge & centre brackets. Contractor to provide expansion joints of 3mm at every 5mtrs both ways. Panels shall be back lined with acoustical infill of 1000gsm x 50mm thick adhered to the wall using Stick adhesive Technical Parameters. (Make - Aeroceil, Duxyon, Armstrong) (FIRST, SECOND FLOOR)

STRETH WALL FABRIC ACOUSTIC PANEL : Supply and installation of Stretch wall fabric system by using FR Grade acoustic fabric of size 1700mm width, shall be stretched by using wooden base 12.5 mm thick, rigid vinyl Stretch Tracks half wrap/full wrap 12.5mm and Midseam 12.5mm, Strand wood wool board , Infills polyester fibre infill with requisite accessories & tools. Wooden base 12mm is first installed on the wood fibre along the marking lines with metal fasteners inserted at 300mm centres. 12.5 mm tracks to be installed on wooden base, after applying Stick adhesive on both surfaces for a true and continuous secure grip, and heavy-duty fasteners at 150mm centers on one/both sides of Stretch Tracks. The GI strut system includes GI Cross channel having thickness 0.45mm, length 3600mm, knur led web 40mm, depth 25mm and equal flanges 15mm is fastened vertically/horizontally at every 600mm centres. Strand Wood Wool Board is square edge magnesite bonded pinewood fibre panels of size 600x1200x25mm having density 400kg/m3, weight 4kg which is fixed to Cross Channel 25mm. Long edge of panels should be perpendicular to length of Cross Channel , Infills polyester fibre infill 1000gsm 25mm thick adhered on Strand Wood Wool Board panel by using adhesive. Fabric of width 1700mm is then aligned to the Stretch tracks by following the fabric thread line or pattern. The fabric is stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module wall fabric width would be 1600mm. Technical Parameters: • Core – Pine wood fibre & Poly fibre • Fire – Class A • Acoustics – NRC 0.90 • Climate (OC RH) – 55, 90 • Termite resistance – Yes • Light reflectance – Colour dependent • Green (RC %) – Low, 10 inatallation as per direction of EIC. (Make-Armstrong/Hunter Douglus/Anutone/ Aeroceil)

DRY WALL PARTITION (MAGNESIUM BOARD): Supply and Installation of 70 mm thick magnesium oxide board drywall Tufbloc partition system having which includes two layers of tufbloc magnesia square board having square edge & size 2400 X 1200 x 10 mm to be fixed on the either side of the GI stud channel framework in horizontal position of length side board. Now the frame work includes Floor / Head channels having thickness 0.06 mm length 3600 mm ,equal flanges of 32 mm & web of 50 mm fixed to floor & ceiling with suitable fasteners at 300 mm centers staggered noise & fire rated silicon sealant tocaulked along the perimeter of the partition frame before fixing channels.Then stud channels SC 48 having thickness 0.75 length 3600 mm , un equal flanges of 36 mm & web of 48 mm should be placed into the floor / head channels positioned vertically at 600 mm centers. Horizontal intermediate channel at 1200 mm centers to locked with the vertical studs. Extra reinforcement to be provided at openings. Apply Synthetic poly fiber 10 x 25 is 50 mm width,600/1200 mm density 500 gsm filled between the studs & held in position by using chicken mesh wire / pasting on the board Manufacture By Sgaapl. Now, boarding is to done on each side of studs framework in a staggered pattern by the help of self drilling screw at 300 mm centers. After boarding of two boards jointing & finishing is to be done by joint compound. (Make - Aeroceil, Duxyon, Armstrong) (FIRST, SECOND, THIRD FLOOR)

MCM CLADDING: Supply of MCM Modified Clay Material ‐ MCM Slate Sunnye ‐ 1200 x 600 mm , thickness 2.5mm to 3mm PHOMI make, as per company standard dimension, pattern, colour as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 & European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation ‐ Class A— ASTM E84‐ 15. The product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and substrate and per directions of Engineer in-charge. Grouting should be done using filling and pointing method as per installation drawing provided, and colour of the grout should be as per the architect’s specification depending on the substrate and as per the direction of Engineer in-charge . (GROUND, FIRST)

GRC JALI Providing and fixing Glass Reinforced Concrete (GR.C) Screens in approved size pattern, design, shadeand thickness of 50mm on frame and design element in 30mm thick have weight approximately between 3.5 4 Kg per Sq Ft and color of M/S UniStone make or equivalent. The above weight and thickness is considering dimensions of screens up to 2133mm in height and 1219mm in width and having at least 50% void space. The screens should be made from '53 grade' White Portland Cement manufactured by JK Cement' or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by 'N.E.G JAPAN or equivalent, Super Plasticizers manufactured by "BASF or equivalent Polymers manufactured by 'BASF or equivalent and UV resistant Synthetic inorganic pigments should be used for pigmentation manufactured by 'BAYFERROX (Germany) or equivalent. The material casting should take place in FRP Molds. The fixing of Screens should be 'Dry fixing' Le to be done with M.S Galvanized Clamps, fixtures and fasteners of Hilti / Fischer. (GROUND FLOOR)

Roller Blind: Supplying and fixing of Roller blinds by fixing powder coated top channel, bottom channel with bottom end cap, control unit and good quality of 0.6 mm thick fabric of approved desgin and quality etc. complete.

WALLPAPER; Supply and Installation of Wallpaper of reputed brand such as of design/shade 7957-1. Rate includes complete installation including the cost of all materials, cost of all labour, conveyance, loading & unloading, and T&P, etc. complete in all respect as per direction of the Engineer in Charge.

Louvers Wall Panelling: Supply and fixing of 5-14mm calcium Polymer based vertica systems of LEBEN/NEWTECH/ALWOOD Innovations of panel size of 1230mmx2800mm along with option to custom size to a maximum of 3000mm in length in approved shade,manufactured in india, made with high temprature thermal transfer technology, waterproof,fire retardant and anti-bacterial. Termite resistant, rust proof material. For wall panels to be installed with aluminum/GI clip of suitable gauge & size, subject to change according to site conditions. For walls, it can be directly Screwed/ adessive to the wall. Panels to be installed using suitable, J-Trim/J-Trim/L - Trim using same shade for edge profiles. Panels are maintenance free and with 10years warranty for colour & finish of the panels. All material, accessories as per direction of the Engineer in Charge.

FURNITURE WORKS FORUM MBG FXD ARMS TELLER BASE Powdercoated Teller Base -Forum Medium Back Mesh Chair -AN 70 Mesh -Centre Titi Mechansim -Powdercoated Teller Base -Fixed Arms -Nylon Base -Fabric Upholstered Cushion Seat GROUND FLOOR

Supplying and placing a three seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 45Kg/m³ in seat and 32Kg/m³ in back. The backrest of the sofa shall be supplied with traditional tufted buttons with decorative appealing. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall consist of SS 304 grade leg with shiny chrome finish having thickness 12mm. There shall be buffers provided at the bottom to avoid scratches on the floor as well as uneven surfacing. The seat size shall be 2000±10 mm(W) X 620±10 mm (D) X 430±10 mm (H). Overall width = 2600±10 mm, overall depth = 1000±10 mm & overall height = 740±10 mm. Make- Godrej/featherlite/Geeken/wipro or equivalent

Providing and supplying single seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 45Kg/m³ in seat and 32Kg/m³ in back. The backrest of the sofa shall be supplied with traditional tufted buttons with decorative appealing. There shall be cushion arm provided padded with high resilience polyurethane foam having density 32Kg/m³. The complete structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall have SS 202 grade with shiny chrome finish frame having thickness 12mm. There shall be buffers provided at the bottom to avoid scratches on the floor as well as uneven surfacing. The seat size shall be 670±10 mm(W) X 620±10 mm (D) X 430±10 mm (H). Overall width = 1270±10 mm, overall depth = 1000±10 mm & overall height = 740±10 mm. Make- Godrej/featherlite/Geeken/wipro or equivalent

Providing and supplying centre table with an overall size 900mm X 900mm X 410mm. The top should be made up of 75mm thick, it would be 25mm at mid and 75mm at sides. The MDF top should have decorative finish with approved veneer and PU polish accordingly. The understructure shall consist of 4 nos. of MS sheet gold leg with 6mm thick. Make- Godrej/featherlite/Geeken

VERVE GLASS TABLES (610-FS-DM SIDE TABLE) Square Chrome Frame with Glass Top Size : 600 X 600mm x 505ht , Make- Godrej/featherlite/Geeken

THREE SETAER WAITING CHAIR BRUNEY LEATHERETE - 3 SEATER Bruney Three Seater Cushioned Tandem (Leatherette) Fixed Arms Size : L 1980 x D 690 x H 825 mm Make- Godrej/featherlite/Geeken

VERVE GLASS TABLES (610-FL-DM CENTER TABLE) Rectangular Chrome Frame with Glass Top Size -1200 x 600mm . Make- Featherlite, SIT or equivalent.

Providing and supplying high back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 18mm thick hot pressed commercial plywood upholstered with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ with foam net tapestry 0.9mm thick and 300 GSM and the back shall be made of injection moulded polypropylene net cover upholstered with breathable mesh tapestry. The backrest of the chair shall be made by keeping the natural curvature of the spine with adjustable lumbar support. The chair shall be supplied with injection moulded PU adjustable arm completely joint with seat. For seating durability the chair shall have ACTICE BIO-SYNCHRO mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged made of die cast aluminium having pitch circle dia.. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should beinjection moulded in 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 520±10 mm(W) X 500±10 mm(D) and back size shall be 495±10 mm(W) X 750±10(H) from seat & overall height = 1150±10 mm. Make- ISIT,Godrej/featherlite/Geeken

Providing and supplying mid back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 18mm thick hot pressed commercial plywood upholstered with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ with foam net tapestry 0.9mm thick and 300 GSM and the back shall be made of injection moulded polypropylene net cover upholstered with breathable mesh tapestry. The backrest of the chair shall be made by keeping the natural curvature of the spine with adjustable lumbar support. The chair shall be supplied with injection moulded PU adjustable arm completely joint with seat. For seating durability the chair shall have ACTICE BIO-SYNCHRO mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged made of die cast aluminium having pitch circle dia.. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should beinjection moulded in 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 520±10 mm(W) X 500±10 mm(D) and back size shall be 495±10 mm(W) X 750±10(H) from seat & overall height = 1050±10 mm. Make- Godrej/featherlite/Geeken

DISCUSSION TABLE VDT -1050: Table Top - 25mm Thick Pre-Laminated Particle Board finished with 2mm PVC Edge Banding. Supports - Supported on 25mm thick Pre - laminated Particle Board Gable ends Wire Management - 85mm dia Laptop socket & Aluminium pole for wire management is considered. Make- Godrej/ featherlite/ Geeken

Alpha Medium PP (Black)Back Mesh Chair AN 70 Mesh Fabric Upholstered Cushion Seat Fixed Arms Powdercoated 4 Legs, Make- Godrej / featherlite / Geeken

Providing and supplying a high back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of 18mm thick hot pressed BWP plywood padded with high resilience polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 32kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine which helps to provide lumbar support. The chair shall be supplied with PP arm with cushion having leatherite covering top pivot joint with back. For seating durability the chair shall have knee tilt 360 degree revolving mechanism having four position locking and tilt tension adjustment with anti-shock feature which provides back strength for the chair. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged Polypropylene base with chrome having pitch circle dia. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 510±10 mm(D) X 570±10 mm(W) and back size shall be 550±10 mm(W) X 670±10 mm(H) from seat. Overall height shall be = 1130±10 mm, overall depth = 690±10 mm & overall width = 700±10 mm. Make- Godrej/featherlite/Geeken

Executive Chair for Court Dias.(Wooden) Make-Godrej/featherlite/Geeken

Cupboard 13'6"Lx1'6"Wx2'6"HT, Providing & Fixing of Cupboard of size 13'0"Lx1'6"Wx2'6"HT, made of 19 mm thick BWR Ply sandwiched together and back to be supported with single 19 mm BWR ply. All exposed surface to be laminated with 1mm thick decorative laminates (Textured). Four Shelve of size 3'0"(L) x2'(W) x 10"(D) should be provided made of 19mm thick prelam BWP ply with G Profile, Auto Hinges,Corner joint and 5 mm plain glass etc, including all cost of materials, T&P, all labour etc complete as per the Direction of Engineer in - charge. Make- Godrej/ featherlite/ Geeken

Providing and supplying 4 Seater Dining Table (with chairs) made up of Teak Wood having ONYX marble Top with Melamine Finish: The understructure is made of teak wood and consists of a melamine finish. The table top carrying maximum capacity of 56000 Grams weight. Item dimensions (L x W x H) 149.9 x 89.9 x 254 Centimeters. Make- Godrej/ featherlite/ Geeken

L-SHAPE WORKSTATION SIZE: 1500/1500W X 600/600D X 750HT TABLE TOP WITH 1200MM HT PARTITION Specifications: Table top: Made of 25mm thick prelaminated particle board of approved shade. All the edges of workstation surface shall be provided with machine pressed 2mm thick imported PVC lipping glued with hotmelt Eva glue free from any VOC. Partition: Height - 1200mm frame with top and sides in Aluminium trims and junctions with diecast caps. Partition is made of 50mm thick 1200mm ht NEO based system with fabric above and lamiante below the table top.Fabric magnetic and glass markers are provided for each workstation. Under Structure Support: 18mm thick PLT gable end. Wire Management: Raceways are provided BTT only main spine and skirting on main/return (inside) spine for power and data cable management. 65mm dia grommet hole is provided for wire access, With pedestal. Make- Godrej/ featherlite/ Geeken

FORUM VA PC 4 LEGS FXD ARMS WD -SMALL Forum Low Mesh Back Visitor Chair AN 70 Mesh Fixed Arms Writing Desk - Small Powdercoated Four Legs Fabric Upholstered Cushion Seat Make- Godrej/ featherlite/Geeken

VENUS AUDITORIUM CHAIR Metal frame for seat & back. 3 mm Foam laminated fabric. Moulded PU foam of 45 density +/- 5 density tolerance. Wooden Polished armrest without cupholder. Tubular " C " Channel Pedestal. PPCP tray for seat & back. Seat numbering for seat & back both. Row numbering. Black powder coating surface. Auto tip up & sliding feature. Make- Godrej/ featherlite/ Geeken

Executive table L Shaped 8'0"Lx3'0"Wx2'6"HT, 6'0"Lx3'0"Wx2'0"HT Providing & Fixing of study table of size 8'0"Lx3'0"Wx2'6"HT, 6'0"Lx3'0"Wx2'0"HT TOP and sides of table to be made of two 19 mm thick BWP Ply sandwiched together and back to be supported with single 19 mm BWP ply. All exposed surface to be laminated with 1mm thick decorative laminates (Textured). Five drawer of size 2'0"(L) x2'(W) x 69"(D) should be provided made of 19mm thick prelam BWP ply with decorative laminate, soft close channels, concealed handle etc, including all cost of materials, T&P, all labour etc complete as per the Direction of Engineer in - charge. Make- IGodrej/featherlite/Geeken

E.I. WORK EXTRA LIGHT FIXTURES FOR CONFERENCE HALL SITC of extruded black powder coated Aluminium housing 2W/ mtr step light with provision for LED strip with diffuser, provision for illuminated seat numbering on both sides, rubber grip, vertical screwing ,12/24V in complete as per direction Eng-in-charge. Make-Belight/Illumax/Equivalent

Supply Installation testing and Commitionning of Almunium Made decorative picture light with bronze Finish having dimension of 355x180x95 mm with 7 W and Delivering 270 Lumen with Flexible neck for adjusting beam CRI>80 having cat ref -31402 MUZIRIS 7W With all accessories.(Make:Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years

Supply, Installation Testing and Commissioning of IP20 LED strip with a nominal system lumen output of 1600 lm /m with system efficacy of 102lm/W SDCM<=3 The luminaire shall have a rated system lifetime of 30,000 hours. The luminaire shall have a color temperature of 4000K and CRI>80with No of LED 120 Nos . luminaire is to operate on 24VDC.with working temperature rage of upto 35degC ambient. Luminaire must be supplied along with all the accessories such as driver, moutning tracks/ clips, end caps, diffuser, strip connectors etc as applicable. Similar to PhilipsFlexCove G5 LS170S G2 Basic (5m Roll) + Accesories With all accessories.(Make:Panasonic/ LT/ Havells / Philips/ Wipro / Crompton/ Bajaj) The luminaire should be Replacement Warranty will be 2 years

S/I/T&Commissioning of UPS Incoming Panel made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 1 year & compelete test certificate must be submitted along with panel board including component list.Type 2 SPD,40kA shall be installed in the incomer. 20x10mm Separate Aluminium Earth bus bar should be installed.In commer- 01 no 125A 4P MCCB 25KA withTMR based release with adjustable overload ,Icu=100%Ics, on/off trip indication.( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula

LIGHTNING PROTECTION SYSTEM & UPS- Supply of 8 mm Aluminum Round Conductor.Tested as per IEC 62561. as per direction of engineer in charge. Make-OBO/Dehn/ABB

Supply of Roof conductor holder for parapet- Polyamide Conductor holder:With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn/ABB

Supply of Polyamide roof cable holder for flat roof: DIN 48829 Form B1. Closed form with bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black @ 1 meter distance. Tested as per IEC 62561. Make-OBO/Dehn/ABB

Supply of Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised. Tested as per IEC 62561.2nos/expansion piece Make OBO/Dehn/ABB

Supply of 1 mtr vertical air terminal with mounting accessories on the flat surface to meet the requirements of IS/IEC 62305. Tested for Electrical , mechanical and chemical as per IEC 62561. Tested for 100kA lightning current. MakeOBO/Dehn/ABB

Supply of Vertical air terminal with accessories:Providing of Air terminals as per IS-IEC -62305 part-3 Nominal size Ø10/16 mm aluminium rod: 2 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load. Tested as per IEC 62561. Make-OBO/Dehn/ABB

Supply for Providing of Stand for Fang Fix system 16 kg with base and clamp ,made up of frost resistant concrete and clamp tested upto 100KA lightning current . Make-OBO/Dehn/ABB

Supply for Providing of Stand for Fang Fix system 16 kg made up of frost resistant concrete. Make-OBO/Dehn/ABB

Supply of Test Joint (Folding Clamp) suitable to connect 8mm round conductor and max by 30x3 mm GI strip as specified in drawing and directed by Engineer. Tested for 100kA lightning current. Make-OBO/Dehn/ABB

Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr Height For Test Joint .Internal dimensions: 100x100x48 mm Make OBO/Dehn/ABB

Supply of Galvanised Steel Flat 30X3 mm thickness from earth electrode directly in ground as required. Flat conductor Hot Dipped Galvanized. Tested as per IEC 62561. Make-OBO/Dehn/ABB

Supply for Providing of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. Tested for 100kA lightning current. Make-OBO/Dehn/ABB

Supply of flat conductor holder- Fit: FL 30, With mounting hole 6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece from hot-dip galvanised steel, Bottom section from polyamide, black. Tested as per IEC 62561. Make-OBO/Dehn/ABB

Supply for Providing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. Make-OBO/Dehn/ABB

Supply of UL Listed maintenance free ,Low carbon copper coated earth rod of 3 metre electrode having diameter of 17.2 mm with copper coating thickness of 250micron tested as per IEC 62561-2 Make-OBO/Dehn/ABB

Supply of universal clamp made of SS to connect rod with flat conductor Make-OBO/Dehn/ABB

Supply of Earth conductivity enhancing mineral compound shall be of 25 kg/pit tested as per IEC 62561-7,TCLP tested Make-OBO/Dehn/ABB

Supply of The above arrangements shall be provided with Heavy duty earth champer of 5000kg load bearing capacity to ensure the safety of earthing system Make-OBO/Dehn/ABB

Lightning Counter-To count number of lightning strike and it can record the data and time of lightning incident as per IEC 62561 as per direction of EIC.Make-OBO/Dehn/ABB

Installation of The above arrangements including all accessories as per Direction of Engg. In charge.

60KVA UPS :Supply ,installation ,testing & commissioning of 60KVA UPS SYSTEM WITH IGBT based inverter system, true online double conversion system, inbuilt isolation transformer & automatic phase sequence corrector of 3ph in put to 3 ph output,415V, with built in BMS with battery back up up to 30 minutes with MS Rack for battery Housing, DC cable 7 Mtr with SFU and links for installation (Battery required: 12V, 84AH, 60 No.s) protection for fault by OL,UV,EF,GF,OC,Ph. (Make:Numeric/APC/ Vertiv/) as per direction of Engg.-in-Charge.

DG SET:- Supply, Transportation, erection, testing and commissioning of 3 Phase, 415V, 50Hz, water cooled multi cylinder diesel generator set with alternator of prime rated 750KVA out put contineous rating directly coupled Engine and Alternator with guard and mounted on a common base plate of Robust construction and complete with AMF panel having IP-52 protection, Acoustic Enclosure as per CPCB IV+ norms , sound absorbing material, to restrict sound level up to 75 dB up to 1 mtr distance and as per CPCB IV + norms etc as per following specifications mentioned below.Warrentee period of panel must be 2 years. ALTERNATOR:The alternator of the output rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The alternator is self excited, self regulated, and shall confirm to IS: 13364 of 1992 with regulation of +5% from no load to full load. degree of protections shall be IP21.ENGINE:. Diesel Engine start, developing suitable BHP output at 1500 RPM with mechanical / electronic governing so as to enable the alternator to give 750KVA continuous output at 0.8 P.F. lagging at NTP conditions. The diesel engine shall be capable of providing 10% O/L for 1 Hr for every 12 Hrs of continuous running at full load. The engine with 1st filling of oil and Diesel etc.01. Exhaust pipe of required size and length with insulation or clading.02. Diesel tank suitable for 8 to 12 Hours running capacity.03. Industrial Silencer. 04. SMF Batteries with leads as per the Manufacturer standards,BASE PLATE: Common Base Plate of required size for mounting of Engine Alternator Set fabricated from MS Channerl and vibration damping arrangement with cushy foor mounting including paintng etc. as required. FOUNDATION: Suitable size Cement Concrete (1:2:4) foundation duly plastered and finished with neat coat Cement as required along with smoke exhaust system piping including base frame of structure & lightening protection system. *It also includes control cable of 15mtr 2.5sqmm 6core , civil foundation work.

AREA LIGHTING:-S/F of Street light- 90W,120 lm/w efficacy ,IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty)

Supply of 6 mtr long hot dip Galvanized Octagonal pole manufactured from HT steel as per BS EN 10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 130 MM A/F of 3 mm thick or more , base plate as per IS 2062 complete with 4 nos. En 8 grade foundation bolts to withstand basic wind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer )or more (Make of poles: Utkarsh/Bajaj/RR Ispat/Vakrangee as per direction of Engg. in Charge.

Installation of pole by making the suitable size foundation by embeding the pole 1 mtr into the ground with necessary civil work and fixing the light on the pole equievalant make ISI marked as approved as per direction of Engg. in Charge.

SITC OF 1Mtr Decorative Arm. (Make of poles: Utkarsh/Bajaj/RR Ispat/Vakrangee as per direction of Engg. in Charge.

Supplying, Erection, Fixing, connection & testing of LED BOUNDRY WALL Light of elegant look (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) 35 W LED street light having die cast aluminium housing with toughened glass having lumen efficacy of 110 lm/w or more (As per LM 79 report of third party NABL lab) ,IP 65 protection or more , LED street light model having warrantied for a period of 5 years . The luminaire should be supplied along with bracket maintenance free for inspection as required as per direction of Engg.-in-Charge.

Supplying, Erection, Fixing, connection & testing of 40W LED GATE Light of (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) maintenance free having 2 years warranty G.I P ipe with braket including MCB box & including with foundation as per the Drawing for inspection as required & as per direction of Engg.-in-Charge.

Supply, Installation, Testing & Commissioning of of IP65 (10-12)w Bollard Fixture with Body made of Extruded Aluminium /Mild steel Pole & PDC Aluminium Housing for Optimal thermal Conductivity. With UV Stabilized Injection Moulded Diffuser for Soft and even light distribution. High Efficiency Driver with necessary safety Protection against Short Circuit, Miswiring,Over Voltage and Surge Protection of upto 10kV ( 4kV Internal and 10kV External SPD of IP67) THD<10%. CRI>70, PF>.95. CCT - 5700/4000/3000K.Impact Resistance IK05.Operating Voltage Between (100-275)V. Avg life of 50,000 Burning [email protected] the light fixture and the Driver Should be BIS Approved.Before final procurement, the final design shall be approved by the concerned client and Engineer-in-charge. Make-K-LITE( Model-Prince Orna Rook) /Philips/LT/PANASONIC/Havells/Bajaj/Crompton/Wipro

Supplying,installation,testing & commissioning Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge.

Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.

CABLING: Supplying of one number PVC insulated armoured and PVC sheathed XLPE AL. conductor power cable of 1.1 KV grade POLYCAB/KEI/HAVELLS /RR KABEL/FINOLEX/GLOSTER of following size cables as per direction of Engg.-in-Charge.Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. 3.5core x 35 sq mm

4core x 16 sq mm

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.

Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge.

Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. 3.5 core x35sq mm

4core x 16 sq mm

Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. (POLYCAB/KEI/HAVELLS /RR KABEL/FINOLEX/GLOSTER)

Providing,fixing and laying of fallowing dia PN10 HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. 32mm

FIRE EXTINGUISHERS :- Providing & fixing ABC type (Dry powder type) extinguishers. Including all accessories as per IS specification (IS :15683) Consisting of welded MS cylindrical body with discharge hose ,discharge valve ,suspension brackets,initial filling etc. complete as required., initial filling etc complete as required. Capacity - 6 kg . Make : Fireshiled/ Kanex/ Safex/ ceasefire/Flameklog

Providing & fixing Water based Carbon-di-oxide 4.5 ltrs. fire extinguishers as per IS specification consisting of welded MS cylindrical body ,squeeze lever discharge valve fitted with internal discharge tube ,30 cm long high pressure discharge hose ,discharge nozzle,suspension brackets,finished exteranally with red enemel paint and fixed to wall with brackets with rawl plug/dash fastners complete with initial charging. Make : Fireshield/Kanex/ Safex/ ceasefire/Flameklog

SITC of 2 kg capacity Eco friendly stored pressure type filled with HFC 236(Clean agent fire extinguisher having zero ozone depletion potential) clean agent fire extinguisher s with safety seal,pressure gauge, controlable discharge mechanism helium leak detection tested and confirming to IS:15683 complete with initial charge as required. Make : Fireshield/Kanex/ Safex/ ceasefire/Flameklog

Supplying and installing at approved location approved make fire buckets at 24 gauge galvanized stseel sheet, standard 9 liters capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letter "FIRE" in black and gold. Cost shall be inclusive of Providing MS stand duly painted over a coat of primer (one stand shall be suitable for hanging 5 buckets.

SIGNAGES: SITC flexyl of Photoluminescent based Glow-in-the-dark sheeting with luminious properties enclosed in a weather-proof UV stabilized film with UV screen printing by imported inks pasted over 3 mm Thick Cast Acrylic Sheet with the Protection of 3 mm Thick Cast Acrylic from Front side with stud type mirror screw with lifespan of 5 years, visible upto 4-6 hrs in total darkness for floor indication, fire exit, hydrant, hose reel, fire extinguisher, MCP, fire alarm panel, in case of fire, lift, alarm valve signages

SIGNAGES: SITC flexyl of Photoluminescent based Glow-in-the-dark sheeting with luminious properties enclosed in a weather-proof UV stabilized film with UV screen printing by imported inks pasted over 5 mm Thick Cast Acrylic Sheet with the Protection of 3 mm Thick Cast Acrylic from Front side with stud type mirror screw with lifespan of 5 years, visible upto 4-6 hrs in total darkness for fire evacuation plan, fire action(For all floors)

CCTV WORKS: Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low-Light IR motorized Lens Dome/Bullet Camera, 1/2.8" CMOS or better, 5MP (2592 x 1944) @ 25fps or better, four stream at various resolution & Frame Rates, Min. Illumination required 0.005 lux (color), 0 Lux IR On, 3 IR LEDs, Smart IR with upto 70m(bullet)/50m(dome) IR distance, Auto ICR (Infrared Cut Filter) 130dB True WDR, S/N Ratio 55db, Shutter Speed 1/3 - 1/100,000; Adavance Video Compression technology such as H.265 HEVC/ H.264 / MJPEG , Fixed Lens 2.7-13.5mm motorized, Field of View FoV H:100-28.5°, V:73-21.4°, BLC, HLC, WDR, 2D/3DNR, White Balance - Auto/Manual/Day/Night/timing, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 5 Privacy Mask, 6 Region Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 2TB SD card support, PoE (802.3 af) and 12V DC, IP 66/67 & IK10 Vandal proof with Die Cast Aluminium Housing, Having Operating temp range : –30°C to 60° C. Certifications: ONVIF Profile S/G/T compliant,, CE (EN 50130-4), FCC Part 15, EN 55032 & RoHS (EN63000),NDA,STQC compliant. Make-Honeywell value series/Pelco/Axis/Bosch

Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low-Light IR Fixed Lens Dome/Bullet Camera, 1/2.8" CMOS or better, 5MP (2592 x 1944) @ 25fps or better, four stream at various resolution & Frame Rates, Min. Illumination required 0.005 lux (color), 0 Lux IR On, 3 IR LEDs, Smart IR with upto 50m(bullet)/40m(dome) IR distance, Auto ICR (Infrared Cut Filter) 130dB True WDR, S/N Ratio 55db, Shutter Speed 1/3 - 1/100,000; Adavance Video Compression technology such as H.265 HEVC/ H.264 / MJPEG , Fixed Lens 2.8mm(Dome)/3.6mm(bullet), Field of View FoV H:96.5°, V:73.8°(dome)/ Field of View FoV H:94.1°, V:71°(bullet), BLC, HLC, WDR, 2D/3DNR, White Balance - Auto/Manual/Day/Night/timing, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 5 Privacy Mask, 6 Region Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 2TB SD card support, PoE (802.3 af) and 12V DC, IP 66/67 & IK10 Vandal proof with Die Cast Aluminium Housing, Having Operating temp range : –30°C to 60° C. Certifications: ONVIF Profile S/G/T compliant,, CE (EN 50130-4), FCC Part 15, EN 55032 & RoHS (EN63000),NDA,STQC compliant. Make-Honeywell Value series/Pelco/Axis/Bosch

Supply , Installation, testing , commissioning of 64 Channel NVR with 8 SATA; 384 Mbps incoming bandwidth, Up to 8 Megapixels Resolution Display and Recording, H.265 video compression technology with real time encoding, Full function CMS (Central monitoring software) supported, Two way audio supported, Dual streaming technology to encode recording stream and network stream separately, Supports remote monitoring on Mobile Client (Android, IOS), TCP / IP, PPPoE, DHCP, DNS, DDNS, UPnP, NTP, SMTP, Time/ Date, Alarm, Motion Detection & Exact Search (accurate to second), Record Snapshot, FTP, Preset Calling, Email notification supported, Manual/ Alarm/ Motion Detection/ Continuous, CE, FCC, RoHS). Make-Honeywell value series/ Pelco/ Axis/ Bosch

Supply, Installation,Testing & Commisioning of Surveliance 10 TB HDD. Make:- WD/ Segate/ Toshiba

Supplying and drawing following core Fiber Optic Cable having corrugated steel armoring. The Fiber should be SM Fiber Central -loose tube filled with Thixotropic jelly, duly following Standards: ISO 11801, IEC 60793-1/60794-1-2, ITU-T-REC G.652D and Telecordia GR-20-core, High quality Electro Chromium Coated Corrugated Steel tape (ECCS ) and HDPE- Sheath, Operating ambient Temperature should be – 5 0C to +50 0C and Storage Temperatureshall be – 5 0C to +50 0C, Max Attenuation ± 0.36 (db/ km) at Operational Wavelength 1310 nm and ± 0.22 db / km at Operational Wavelength 1550 nm. type of fiber should be 9/125 / G.652D & Refractive Index should be 1.4670/1.4675. The value for Mode-filed, Cladding Diameter 9.2 ± 0.4 µm and 125 ± 0.7 µm correspondingly. The Dispersion value < 3.5 < 18 ps/nm-km and PMD value < 0.2 ps/km and Cable Cutoff wavelength < 1260 nm i/c splicing & marking etc complete as required. Single Mode 12 Core Optical fiber cable.Make-Systimax/Legrand/Panduit

SITC of Rack mount Draw Type 24 port Loaded LIU available in Standard 19” ,Dimensions (mm) : 430 X 220 X 1U , Cold Rolled Steel as Raw Material , Consist of Top Cover and Bottom Panel , Easy to Assemble and Dissemble , Three Types of Input Holes Cable Entry Through Water Proof Cable Clamp , 12 Duplex SC or LC Adapter Interface , Splice 24 Fibers at Most with 1 Tray ,Adaptor, SM, Duplex SC, PC Type ,Support the TIA/EIA Telecommunication Wiring Standards. Compact Design , Telcordia GR-326-Core . Make: Systimax/ Legrand/ Panduit

SITC of Pigtail, SM (OS2), SIMPLEX SC, PC TYPE, 1M, LSZH ,Insertion Loss : <= 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PC>= 45db, UPC>=50db, APC>=60db ,LSZH Jacket-Reduced Toxic Gasses Emitted During Combustion , 100% Factory Tested , Low Insertion Loss and Return Loss. Make-Systimax/Legrand/Panduit

SITC of Cat 6, 24-port loaded, 1U Modular Jack Panel Should accommodate Cat6 with Rear Cable Management and Front removable Tooless Information outlet. Should have easy clip management with labels and clear label covers, Made with of Dicast Aluminium Alloy Material and Non Corrosive with Cat6 toolless RJ45 x 24 ports with color code front panel with patch cord locking. Make: Systimax/ Legrand/ Panduit

SITC of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50μ’’ Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Systimax/ Legrand/ Panduit(1 mtr length)

SITC of 24 Port Layer 2 PoE+ Switch having 24 x 10/100/1000 Mbps Ethernet PoE+ ports with 4 x 1/10Gig SFP+ ports ,1 x RJ45 port console port ,Switching Capacity 128 Gbps , Throughput 96 Mpps ,MAC Address 16k , Switch should support IEEE 802.3af (15.4W) & IEEE 802.3at (30W). Total PoE power: 370W or above , Switch should support DHCP server/relay/client, DHCP snooping/option82 , Switch should support Console, Telnet, SSH v1/2, HTTP, HTTPS, SNMP v1/v2/v3, RMON , TFTP, FTP, SFTP, NTP, ZTP, SPAN, RSPAN,Switch should support support ICMPv6, DHCPv6, ACLv6 ,IPV6 Telnet ,Temperature 0°C -50°C ,Power Supply AC: 100-240V. Make: Digisol/ Cisco/ HP/ Netgear

SITC of 1G-LX/LH SFP transceiver module,SMF, 1310nm, 9/125 um Single mode Fiber Type up to 20 KM. Make: Cisco/ Digisol/ Netgear

SITC of 40G Ethernet Routing Switch having 8 x 10/100/1000Base-T (RJ45) + 24 x 10GbE (SFP+) + 2 x 40GbE(QSFP+), 1 x RJ45 Ethernet Management port , 1x Console port ,1x USB2.0 interface , Switching Capacity 656Gbps , Throughput 488Mpps , MAC Address 32K ,Routing Table 16K ,Jumbo Frame 10k , Switch Supports Standard and Expanded ACL Based on source/destination IP or MAC, IP Protocol, TCP/UDP port, DSCP, ToS, IP Precedence), VLAN, Tag/Untag, CoS ,MLDv1/v2, PIM-SM/DM for IPv6, IPv6 Any Cast RP, IPv6 ACL, IPv6 QoS ,Switch have CLI, WEB, Telnet, SNMPv1/v2c/v3 through IPv4 and IPv6 ,Switch Supports VSF(Virtual Switch Framework) , Temperature Working 0°C~50°C, storage -40°C~70°C , Power Supply AC: 100~240VAC, 50~60Hz ,+ 48VDC. Make: Digisol, Cisco, HP, Netgear

SITC of 55" UHD IPS Commercial Digital Display for Small Size Discussion & Chambers: Brightness (440 nits or higher), Dynamic Contrast Ratio (Dynamic MCI (Hz)):1000000:1), 1000000:1, Static (Panel) Contrast Ratio-1200:1, Response Time (G to G)-8 ms, Refresh Rate.-60 Hz, Life span (hrs)-30,000, Speaker (Sound Output):10W + 10W, Speaker System: 2.0 ch, DVB-T2/C Broadcasting System, Commercial Smart UX, webOS version (webOS 6.0), BIS Certification with 3 years onsite warrenty. Make: LG/ Samsung/ Sony

SITC of 9U/500D Wall Mount Rack with Accessories: The rack size should be 600W x 500D, Front frame integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068-2-11 , ISO 9001:2008 including Power Distribution Unit (06/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC - 90 CFM, dB 42), 2nos 1U Metal Cable manager with Plastic cable loops and H/W screw. Make:Valrack, Rittal, Legrand

SITC of 42U 600/1000D UL Listed Floor mount Rack with Front perforated door with 3 point lock, Rear mesh door with Cam lock and 3inch Castor Wheel included with 2 no 6/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Length, 4nos 1U Metal Cable manager with Plastic cable loops, 2nos CFM FAN set, 1no Monitor Tray - Ventilation - 495W - 375D and H/W screw920sets). Make:Valrack, Rittal, Legrand

Supply Installation Tetsting and Comissioning of HDMI EXTENDER. MAKE - mx

SITC of Certified HDMI® Interface Cable, 18 Gbps, 15 m Makes: Honeywell, Extron, Kramer

AV SYSTEM:- SITC of Active LED wall of Pixel pitch:-2.5mm or higher of better minimum size 21 ft x12.6 Ft or higher predefined 4K resolution according to pixel pitch 2560x1536 or higher, includes LED cabinets, 4K LED controller & software, pixel density per sqm 160000 or better, viewing angel 160/160 or better, cabinet 640 x 480 x 55mm cable and accessories and associated civil work, refresh rate 3840 hz or more, minimum brightness 800 nits or more, power consumption (Maximum/ power consumption-550w/sqm or lower) approx, life time of 100000 hour or more, Contrast ratio 8000:1 or more with controller, with 2 years warranty, Inbuilt 4K picture facility Make:-Barco, Delta, Christie

SITC of 75" UHD Smart Display with Brightness-500 Nits, 24x7, Haze-28% or more, 3 x HDMI IN,1x HDMI Port Out ,3X USB Port, (2x2.0, 1X2.0, 1X Type C),Inbuilt OPS Slot , 1 Audio Input,Bluetooth, Built-In WI-FI, 32 GB Inbuilt Memory, 4 GB RAM, Built In Android 11 OS,RS232C -1, RJ45 -1 or more, Landscpae & Portrait both, Inbuilt Speaker-20W(10W x 2) or above. Make- Panasonic, LG, Samsung

SITC of AI based Full HD 1080p @ 60fps Presenter PTZ Tracking Camera with Dual Camera- one PTZ Camera for Presenter Tracking and second fixed lens Panoramic Camera. PTZ Presenter Camera should support min 20X Optical Zoom and 12x Digital Zoom with Panning range of +170 deg to - 170 deg and Tilt Range of -30 to +90 Degrees, Field of View for PTZ Camera should be min 58 Degree and for Panoramic Camera min. 100 Degree, camera should support simultaneous outputs through HDMI, 3G-SDI, USB 3.0 and IP with 1x Audio In and can be controlled via RS232 and IP. Should support multiple video streams. Tracking Camera should support Everywhere Tracking, Partition Tracking, Auto Framing & Gesture Control. Should support PoE and Virtual USB Driver. Quoted model should be BIS, CE, FCC , Clickshare & RoHS Certified with Test Lab Reports. Make: Lumens, Panasonic, Sony, Vaddio

SITC of 4K @60fps PTZ Camera with minimum 30X Optical Zoom & FoV of minimum 68 deg , min 255 Presets. Camera should support simultaneous outputs through Ethernet, HDMI, 3G-SDI, Audio In and can be controlled via RS232 & 422 In & Out & IP.Panning angle -170° ~ +170°, Tilting angle -30° ~ +90° . The tilting and panning speed of camera should be minimum 300° per second. Camera should support SRT, FreeD Protocol, PoE and Virtual USB Driver. Quoted model should be BIS, CE, FCC & RoHS Certified with Test Lab Reports. Make: Lumens, Panasonic, Sony, Vaddio

SITC of Recording, Streaming & Webcasting Hardware simultaneously, Built-in 4x HDMI & IP Inputs with 4x Line Inputs, 2x HDMI Outputs. The system should be capable to record upto any four inputs simultaneously in a single frame and as well as individual sources simultaneously. Should have minimum 1TB inbuilt storage and can be connected to local NAS storage. The system should be able to support minimum 3 unicast streams.The recorded files should have the option of time and date stamp. Quoted model should be CE, FCC & RoHS Certified with Test Lab Reports. Make: Lumens, Arec, Panasonic, Sony, Vaddio

SITC of AVoIP Decoder supporting 4K @60fps with simultaneous outputs through HDMI 2.0, USB Type C & USB Type A with Line Out & 3.5 mm, 1x Line In & 3.5 mm. The decoder should be capable to convert IP to USB 3.0 & HDMI. The decoder should support Video Decoding Formats of H.264/HEVC with in-built AES128 encryption and NDI HX3 / NDI HX2 / RTSP, PoE+ Make: Lumens, Crestron, Extron, AMX

SITC of Digital Podium with Built-in highly sensitive Interactive Panel with adjustable Motorized tilt. Display Size 21 inch or higher. Resolution 1920 x 1080 Full HD or better. Brightness 350 cd/m² (typ) or higher. Connectivity (Minimum) USB x 1, HDMIx 1, DVI x 1, VGA x 1 or better. Battry Free EM Pen. Processor: Intel Core i5 (10th Gen or better processor), RAM 8 GB, Storage 256 GB SSD or better. Controller: Ports on front Panel of Controller (Minimum): VGA,HDMI,USB3.0x2,Audio IN or more. Full HD Visualizer: Camera Sensor 1/4"CMOS Sensor F=2.8, Effective Pixels Min. 8 Mega Pixel or better, Frame Rate Min. 30fps or better, Two Type LED system Top LED & Side LED strip. Make: Globus, AHA, UNI

SITC of 15" high performance 2-way loudspeaker Black version with Drivers HF Compression driver with 1.7" VC and 1" throat, LF 15", Peak power handling 2000 W, RMS/AES power handling 500 W, Frequency Response 50 Hz - 20 kHz, Impedance 8 Ω, Sound Pressure (Max. W/1m) 127 dB Approved Make: Audac/ Pulz/ Martin Audio

SITC of 18” Horn loaded subwoofer cabinet with Peak power handling 3200 W, RMS/AES power handling 800 W, Impedance 8 Ω, Sound Pressure (Max. W/1m) 131 dB, Frequency Response 37 Hz - 130 Hz. Approved Make:Audac/ Pulz/ Martin Audio

SITC of 3-way high outputs speaker cabinet with Peak power handling 3000 W, RMS/AES power handling 750 W, Impedance 8 Ω, Sound Pressure (Max. W/1m) 134 dB, Frequency Response 130 Hz - 20 kHz. Approved Make: Audac/ Pulz/ Martin Audio

SITC of Ceiling flying system mounting bracket.

SITC of high-output loudspeaker cabinet, featuring an 8” high efficiency mid/low range driver and 1” compression driver fitted with a 100° x 80° coverage horn, providing a powerful and detailed sound in a compact cabinet.Speaker type 2-way, Peak power handling 700 W, RMS/AES power handling 175 W, Impedance 8 Ω. Approved Make: Audac/ Pulz/ Martin Audio

SITC of Quad channel power amplifiers with RMS/AES power handling @ 4 Ω Stereo 4 x 750 W, @ 8 Ω Stereo 4 x 380 W, @ 8 Ω Bridge 2 x 1500 W, Frequency Response (± 3 dB) 20 Hz - 20 kHz, Signal / Noise > 95 dB, Technology Class-D, Protection: DC Short circuit, Over heating, Over load, Signal limiting, Loudspeaker Power limiter, Cooling Temperature controlled fan. Approved Make: Audac/ Pulz/ Martin Audio

SITC of pre-polarized condenser gooseneck microphone with overall length of 450mm or better have an integrated light ring, with XLR5M-type connector with , shall offer radio frequency interference (RFI) shielding against intermodulation from wireless equipment or devices, cardioid microphone capsule with uniform 120° angle of acceptance (-3dB) or better, frequency response of 50 Hz to 20,000 Hz or better and sound input levels handling capability of minimum 130 dBspl or better, nominal equivalent noise level of 26 Dba or better and output shall be low impedance balanced (<100 ohms) with current consumption shall be 3 mA or better. Make: Sennheiser, Clock Audio, Rode

SITC of table stand with Microphone modes Toggle on / off, Push to mute, Push to talk, permanent on for connecting and operating XLR gooseneck microphones with XLR-5F microphone input and an XLR-3M microphone output operating on 48 V phantom power and current consumption of 3.7 mA or better. Make: Sennheiser, Clock Audio, Rode

SITC of Podium Microphone of gooseneck stem with overall length of 550 - 600 mm with a pre-amp along with its XLR-3 connector. For set-up as table mount or shock mount. Hyper cardoid capsule, 12 to 48V phantom power, frequency response of 40Hz to 20kHz or better, equivalent noise level maximum 23 dB weightedA or better. Impedance 50 Ohm or better, Minimal terminating impedance 1 kOhm or better, Maximum sound pressure level 130 dB SPL or better with gold plated electrical contact points. Table stand with Microphone modes Toggle on / off, Push to mute, Push to talk, permanent on for connecting and operating XLR gooseneck microphones with XLR-3F microphone input and an XLR-3M microphone output operating on 48 V phantom power and current consumption of 3.7 mA or better. Make: Sennheiser, Clock Audio, Rode

SITC of digital directional antenna with Impedance:50 Ohm; Connector: BNC; Pick-up pattern: directional;Frequency range: 470 - 1075 MHz or better;Antenna gain: 5 dBi or better; Bidder Shall Submitted OEM Authorizationalong with technical bid Make: Sennheiser, Clock Audio, Rode

SITC of dynamic cardioid vocal microphone with frequency response of 40 Hz – 16,000 Hz or better and the sensitivity of 2.7 mV/Pa at 1 kHz or better, nominal impedance of 350 Ohm or better, with a min. terminating impedance of 1 k Ohm. Bidder Shall Submitted OEM Authorizationalong with technical bid Make: Sennheiser, Clock Audio, Rode

SITC of super-cardioid pre-polarized condenser instrument microphone with frequency response of 40 Hz- 20,000 Hz or better and sensitivity of 3 mV/P at 1 kHz or better , Maximum SPL of 139 dB at 1 kHz. Nominal impedance of 50 Ohm or better, with a min. terminating impedance of 1 kOhm or better. Bidder Shall Submitted OEM Authorizationalong with technical bid Make: Sennheiser, Clock Audio, Rode

SITC of 32 Channel Mixer with 32 mono channels, 2 dual stereo inputs with 4-band EQ, 4-band EQ with 2 swept mids and in/out switch, 4 sub groups fed from each channel, 12 bar meters, Individual channel 48V phantom power, Configurable USB stereo audio in/out. Make: Yamaha, Allen & Health, Behringer

SITC of secured 4K wireless presentation device having 1x HDMI Input, 1xHDMI output & stereo line-level audio output.User should be able to present content via OS Supported Apple iOS, Android, Windows 8.1 or higher, Windows 10, macOS, Chrome OS, Miracast™ screen mirroring technology.Able to view minimum four content side by side on the single screen and Device should have HDMI Output port supporting HDCP 2.2, EDID, CEC & multiple USB port for connecting peripherals. Should have ethernet port supporting 100/1000 Mbps, TCP/IP, UDP/IP, DHCP, SSL, SSH, IEEE 802.1x, Active Directory authentication, HTTPS.Standard network security protocols, including 802.1x network access control, AES content encryption, to protect privacy and ensure compliance with your organization’s IT policies.Video out resolution up-to 4k. Device should have 1x RS-232 bidirectional & 1x IR port for third party device control. Should be able to create separate guest network for data sharing. Should be shipped with 1x USB Dongle for wireless 4k content sharing, without downloading any application, without running OEM app, without plugin, for external guests. Supplied 1xUSB dongle must have 2xbuttons on it, where one will be used for sharing content and second button to enable the wireless conferencing feature when required. Should support Wifi 6 communication between 1x USB dongle and wireless presenter hardware.Should comply to IC, CE, FCC (Additional BIS to be shared if applicable) Make: Crestron, Extron, Barco, Kramer

SITC of Transmitter/Wall Plate Type for HDMI, RS 232, and IR Signal extension up-to 40m. Should support video signals HDR10+, Dolby Vision, Deep Color and 4096x2160 @60 4:4:4 resolution. Should support audio signals Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS-ES, DTS HD High Res, DTS-HD Master Audio & LPCM up to 8 channels. Should support HDCP 2.3 content protection. Should have 1x HDMI Input, 1x RJ45 output, 1x RS-232 & 1xIR. Should pass EDID and CEC. Should comply to CE, IC, FCC. Make: Crestron, Extron, Kramer

SITC of Receiver for HDMI, RS 232, and IR Signal extension up-to 40m.Should support video signals HDR10+, Dolby Vision, Deep Color and 4096x2160 @60 4:4:4 resolution. Should support audio signals Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS-ES, DTS HD High Res, DTS-HD Master Audio & LPCM up to 8 channels.Should support HDCP 2.3 content protection.Should have 1x HDMI Output, 1x RJ45 input, 1x RS-232 & 1xIR.Should pass EDID and CEC.Should comply to CE, IC, FCC. Make: Crestron, Extron, Kramer

SITC of 8x8 matrix HDMI AV Switcher. Should have eight HDMI® inputs, eight HDMI outputs and 2x Balanced/unbalanced stereo line-level audio output. Should support video signals HDR10+, Dolby Vision, Deep Color and 4096x2160 @60 4:4:4 resolution. Should support audio signals Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS-ES, DTS HD High Res, DTS-HD Master Audio & LPCM up to 8 channels. Should support HDCP 2.3 content protection. Should have ethernet port supporting 1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, Web browser setup. Should support EDID management & third party device control over CEC. Should support security features and protocols, Active Directory® credential management, 802.1X authentication, TLS, SSH, and HTTPS. Should have minimum1x USB port for firmware, configuration management and to power a USB powered device upto 5 V 500 mA power. Should be controllable over ethernet. Should comply to CE, IC, RoHS, FCC. Make: Crestron, Extron, Kramer

SITC of 2.5 square mm, 2 core, speaker cable or better (Speaker Cable) through PVC Conduit. Approved Make: Finolex/KEI/RR Kabel/Gloster/Havells/Krystal/Liberty

SITC of laying of 6 sqmm 2 core shielded wire. Approved Make: Krystal/Liberty/Finolex

SITC of HDMI Cable 1.8 mtr Makes: Crestron, Extron, Kramer

SITC of Snake Cable: Supply and Laying of 8 pair Analog Audio Snake Cable, 24. AWG stranded (7x32) TC conductor, Polyolefin insulation, individually shielded, number or color-coded PVC jackets and shields bonded to strip simultaneously over all shield and 24 AWG TC drain wire. Make: Krystals/ Kramer/ Belden

SITC of Audio Cable. Make: Krystal/Liberty/Finolex

SITC of XLR Connector

SITC of DI Box having low-impedance (XLR) output.

SITC of 42U 600/1000D UL Listed Floor mount Rack with Front perforated door with 3 point lock, Rear mesh door with Cam lock and 3inch Castor Wheel included with 2 no 6/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Length, 4nos 1U Metal Cable manager with Plastic cable loops, 2nos CFM FAN set, 1no Monitor Tray - Ventilation - 495W - 375D and H/W screw920sets). Make:Valrack, Rittal, Legrand

INTERCOME: Supply and installation of IP PBX System support up to 500 users and minimum 50 concurrent calls, integrated 1 PSTN trunk FXO ports through External Gateway, 1 analog telephone FXS ports with lifeline capability and up to 50 SIP trunk accounts, Gigabit network ports with Integrates PoE, USB, SD card, Supports up to a 5-level IVR (Interactive Voice Response), Supports any SIP video endpoint that uses the H.264, H.263 or H.263+ codecs. Make: Grandstream/ NEC/ Mitel/matrix

Supply Installation Tetsting and Comissioning of hardware daughterboard module designed to enhance the voice processing capabilities of Matrix Eternity series PBX systems, including GENX, MENX, LENX, and PENX platforms. It facilitates high-quality VoIP communication by providing simultaneous transcoding for audio calls.​ Make:-Matrix/CISCO/PANASONIC/GRANDSTREAM

Supply Installation Tetsting and Comissioning of Analog Subscriber Line (SLT) expansion card designed specifically for use with Matrix ETERNITY GE series IP-PBX systems. It enables seamless integration of up to 20 analog (single-line) telephones into the unified communication system, making it ideal for businesses that still rely on analog endpoints alongside digital and IP phones. Make:-Matrix/CISCO/GRAND STREAM

Supply Installation Tetsting and Comissioning of software license that enables support for 5 additional IP (SIP) subscribers on the Matrix SARVAM UCS (Unified Communication Server) platform. This license allows organizations to register SIP-compliant devices such as IP phones, softphones (like Matrix VARTA), and third-party SIP clients, expanding their VoIP network efficiently. Make:-Matrix/D-LINK/PANASONIC /GRANDSTREAM

Supply Installation Tetsting and Comissioning of software license designed to expand the number of expansion slots in the Matrix ETERNITY GENX IP-PBX system. Specifically, it enables the activation of 4 additional universal slots, allowing for greater scalability and flexibility in configuring the system to meet the evolving communication needs of small and medium enterprises (SMEs). Make:-Matrix/CISCO/PANASONIC/GRANDSTREAM

Supply, Installation,Testing & Commisioning of IP based PoE Phone with single lie Display with 2 Ethernet Port. Make: Grandstream/ NEC/ Mitel/Matrix

Supply Installation Tetsting and Comissioning of analog trunk expansion module designed for the Matrix ETERNITY GENX IP-PBX system. This card enables the integration of 4 analog Central Office (CO) trunk lines, facilitating external PSTN connectivity for voice communication.Make:-Matrix/CISCO/GRAND STREAM

Supply Installation Tetsting and Comissioning of Standard telephone handset compatible with analog and IP desk phones. Includes dynamic receiver and electret microphone, coiled RJ-9 cable, ergonomic ABS body.Make:-BEETEL/PANASONIC /PHILIPS/MATRIX/GRANDSTREAM

SITC of 24 Port Layer 2 PoE+ Switch having 24 x 10/100/1000 Mbps Ethernet PoE+ ports with 4 x 1/10Gig SFP+ ports ,1 x RJ45 port console port ,Switching Capacity 128 Gbps , Throughput 96 Mpps ,MAC Address 16k , Switch should support IEEE 802.3af (15.4W) & IEEE 802.3at (30W). Total PoE power: 370W or above , Switch should support DHCP server/relay/client, DHCP snooping/option82 , Switch should support Console, Telnet, SSH v1/2, HTTP, HTTPS, SNMP v1/v2/v3, RMON , TFTP, FTP, SFTP, NTP, ZTP, SPAN, RSPAN,Switch should support support ICMPv6, DHCPv6, ACLv6 ,IPV6 Telnet ,Temperature 0°C -50°C ,Power Supply AC: 100-240V. Make: Digisol/ Cisco/ HP/ Netgear

Supply & Delivery & Laying of 300 Pair CROWN MDF. Make:- ATEL ELECTRONICS/IDIS INDIA/krone

Supply & Delivery & Laying of 50 Pair CROWN D P BOX. MAKE- IDIS India/krone/comstar

Supply & Delivery & Laying of 50 Pair Telephone cable. Make:- POLYCAB/DELTON/Finolex

SITC of 40G Ethernet Routing Switch having 8 x 10/100/1000Base-T (RJ45) + 24 x 10GbE (SFP+) + 2 x 40GbE(QSFP+), 1 x RJ45 Ethernet Management port , 1x Console port ,1x USB2.0 interface , Switching Capacity 656Gbps , Throughput 488Mpps , MAC Address 32K ,Routing Table 16K ,Jumbo Frame 10k , Switch Supports Standard and Expanded ACL Based on source/destination IP or MAC, IP Protocol, TCP/UDP port, DSCP, ToS, IP Precedence), VLAN, Tag/Untag, CoS ,MLDv1/v2, PIM-SM/DM for IPv6, IPv6 Any Cast RP, IPv6 ACL, IPv6 QoS ,Switch have CLI, WEB, Telnet, SNMPv1/v2c/v3 through IPv4 and IPv6 ,Switch Supports VSF(Virtual Switch Framework) , Temperature Working 0°C~50°C, storage -40°C~70°C , Power Supply AC: 100~240VAC, 50~60Hz ,+ 48VDC. Make: Digisol, Cisco, HP, Netgear

NETWORKING: SITC of Rack mount Draw Type 24 port Loaded LIU available in Standard 19” ,Dimensions (mm) : 430 X 220 X 1U , Cold Rolled Steel as Raw Material , Consist of Top Cover and Bottom Panel , Easy to Assemble and Dissemble , Three Types of Input Holes Cable Entry Through Water Proof Cable Clamp , 12 Duplex SC or LC Adapter Interface , Splice 24 Fibers at Most with 1 Tray ,Adaptor, SM, Duplex SC, PC Type ,Support the TIA/EIA Telecommunication Wiring Standards. Compact Design , Telcordia GR-326-Core . Make: Systimax/ Legrand/ Panduit

SITC of Pigtail, SM (OS2), SIMPLEX SC, PC TYPE, 1M, LSZH ,Insertion Loss : <= 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PC>= 45db, UPC>=50db, APC>=60db ,LSZH Jacket-Reduced Toxic Gasses Emitted During Combustion , 100% Factory Tested , Low Insertion Loss and Return Loss. Make: Systimax, Legrand, Panduit

SITC of Cat 6, 24-port loaded, 1U Modular Jack Panel Should accommodate Cat6 with Rear Cable Management and Front removable Tooless Information outlet. Should have easy clip management with labels and clear label covers, Made with of Dicast Aluminium Alloy Material and Non Corrosive with Cat6 toolless RJ45 x 24 ports with color code front panel with patch cord locking. Make: Systimax/ Legrand/ Panduit

SITC of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50μ’’ Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Systimax/ Legrand/ Panduit(1 mtr length)

SITC of 24 Port Layer 2 PoE+ Switch having 24 x 10/100/1000 Mbps Ethernet PoE+ ports with 4 x 1/10Gig SFP+ ports ,1 x RJ45 port console port ,Switching Capacity 128 Gbps , Throughput 96 Mpps ,MAC Address 16k , Switch should support IEEE 802.3af (15.4W) & IEEE 802.3at (30W). Total PoE power: 370W or above , Switch should support DHCP server/relay/client, DHCP snooping/option82 , Switch should support Console, Telnet, SSH v1/2, HTTP, HTTPS, SNMP v1/v2/v3, RMON , TFTP, FTP, SFTP, NTP, ZTP, SPAN, RSPAN,Switch should support support ICMPv6, DHCPv6, ACLv6 ,IPV6 Telnet ,Temperature 0°C -50°C ,Power Supply AC: 100-240V. Make: Digisol/ Cisco/ HP/ Netgear

SITC of 1G-LX/LH SFP transceiver module,SMF, 1310nm, 9/125 um Single mode Fiber Type up to 20 KM. Make: Cisco/ Digisol/ Netgear

SITC of 40G Ethernet Routing Switch having 8 x 10/100/1000Base-T (RJ45) + 24 x 10GbE (SFP+) + 2 x 40GbE(QSFP+), 1 x RJ45 Ethernet Management port , 1x Console port ,1x USB2.0 interface , Switching Capacity 656Gbps , Throughput 488Mpps , MAC Address 32K ,Routing Table 16K ,Jumbo Frame 10k , Switch Supports Standard and Expanded ACL Based on source/destination IP or MAC, IP Protocol, TCP/UDP port, DSCP, ToS, IP Precedence), VLAN, Tag/Untag, CoS ,MLDv1/v2, PIM-SM/DM for IPv6, IPv6 Any Cast RP, IPv6 ACL, IPv6 QoS ,Switch have CLI, WEB, Telnet, SNMPv1/v2c/v3 through IPv4 and IPv6 ,Switch Supports VSF(Virtual Switch Framework) , Temperature Working 0°C~50°C, storage -40°C~70°C , Power Supply AC: 100~240VAC, 50~60Hz ,+ 48VDC. Make: Digisol, Cisco, HP, Netgear

Supply and installation of Dual band 802.11ax WiFi6 Dual Band Access Point. Complying PoE+ for power, with inbuilt on premise virtual controller as well cloud based controlling and administration of WiFi systems All hardware should supplied with necessary mounting brackets and IN power cord with 3 years of comprehensive onsite warranty. Make: Cisco/Digisol/Netgear

SITC of Gate way Router for 500 users with Built-in UTM firewall provides 5 years subscription for anti-virus, layer 3-7 IDS/IPS, DPI, SSL detection, and more. Built-in VPN router supports 2.5Gbps or 3Gbps to allow easy remote access. 2 x 2.5 Gigabit SFP port and 10 x Gigabit Ethernet ports *3x Fixed WAN. 2.5Gbps Router. 4 x PoE out ports, IEEE802.3af/at, Maximum PoE Wattage: 36W. Make Grandstream, Paloalto, Fortigate

Supply Installation & Fixing of AIO Desktop PC having I7 processor,13th generation, 16GB RAM,DDR 5 RAM, 1TB SSD, Full HD 27 inch IPS,QHD Display, Full HD 5mp Camera, pre loaded windows 11 and MS Office, wireless keyboard and mouse Make: Lenovo ideacentre(F0HM00PXIN)

BASEMENT VENTILATION:- Supply, delivery, installation, testing & commissioning of VANE AXIAL FANS as per specifications. Fan shall be AMCA Certified (For Sound and Air Performance as well as FEG) direct driven Vane Axial Fan. The fan shall be equipped with Mounting Bracket, Bird Screen & Spring Isolators for the installation of the fans. Motors (Class H) shall be VFD rated suitable for 415+10% volts, 50 cycles, 3 phase AC supply. Fan static pressure shall be as indicated but actual fan static pressure to be checked by HVAC / MEP Vendor. Motors shall be of minimum IE2 efficiency. Fan total efficiency should not be less than 75% and FEG should not be less than 70, noise level should not be more than 80 dB(A) @ 3m distance when measured in hemispherical reverberant room conditions. Silencer to be incorporated to achieve desired sound level. The rate is inclusive of Starter panel. Make: Greenheck/Systemair/Elta/Krugger/Nikotra/Airflow. AXIAL FLOW SMOKE EXHAUST FAN FOR(BASEMENT) Fan Dia - 1200 mm , Volume - 21,000 CFM, SP - 20 mm

AXIAL FLOW FRESH AIR FAN FOR(LOWER BASEMENT) Fan Dia - 1200 mm , Volume - 21,000 CFM, SP - 20 mm,

JET FAN FOR(BASEMENT) 350mm Dia Jet Fan

Supply, installation, balancing and commissioning of factroy fabricated G.S.S. (Class VIII 180 GSM) rectangular ducting complete with neoprene rubber gaskets, elbow, splitter dampers, vanes, hangers, supports etc as per approved drawings and confirming to SMACNA standard of following sheet thickness complete as required.Make:Sail/Jindal/Tata. 22 SWG

Supply, fabrication, installation and testing the flexible Canvas connections constructed of fire resistance flexible double canvas sleeve at Duct mouth.

Supply, delivery, installation, testing & commissioning of Angle Support 50*50*6 MS Angle and MS C Channels

Supply, delivery, installation, testing & commissioning of Vibration Pad

Supply, delivery, installation, testing & commissioning of bird screen for Fans.

Supply, delivery, installation, testing & commissioning of CO Sensor.Make-Dwyer/Schneider/Honeywell

Supply, delivery, installation, testing & commissioning of CFD Analysis

TOILET VENTILATION & LIFT PRESSURIZATION- Supply, Installation, Testing and Commissioning of Duct mounted Single skinned Circular Inline Centrifugal Fan for Toilet Ventilation with direct driven Backward-curved impellers.The Fan has external rotor motor suitable for 1~, 230V, 50 Hz power supply in complete as per the direction of Engineer-in-charge. MAKE - SYSTEMAIR/ GREENHECK/ ELTA 2250 CFM Cabinet Type Inline Fan with 10 mm SP

2500 CFM Cabinet Type Inline Fan with 10 mm SP

2750 CFM Cabinet Type Inline Fan with 10 mm SP

3000 CFM Cabinet Type Inline Fan with 10 mm SP

3200 CFM Cabinet Type Inline Fan with 10 mm SP

3500 CFM Cabinet Type Inline Fan with 10 mm SP

250 CFM Circular Inline Fan with 6 mm SP

350 CFM Circular Inline Fan with 6 mm SP

Supply, Installing, Testing and Commissioning of VANE AXIAL FANS as per specifications stated below. Fan shall be direct driven Vane axial fan , IP55, AMCA Certified (For Air and Sound Performance as well as FEG). The fan shall be equipped with mounting bracket, inlet guard (If required) & spring isolators for the installation of the fans. Motors shall be VFD Compatible suitable for 415+10% volts, 50 cycles, 3 phase AC supply. Fan static pressure shall be as indicated but actual fan static pressure to be checked by HVAC / MEP Vendor. Supply Fans shall be activated from fire signal from fire alarm system. Fan shall be with fire proof flexible connection at outlet. Motors shall be of minimum IE2 efficiency, class F insulator. Fan total efficiency should not be less than 72% and FEG should not be less than 85, noise level should not be more than 84 dB(A) @ 3m distance when measured in hemispherical reverberant room conditions. Sound attenutors of appropriate length shall be included in the cost to achieve the desired result.The rate is inclusive of starter panel. MAKE - SYSTEMAIR/ GREENHECK/ ELTA LIFT WELL PRESSURIZATION 11,000 CFM, SP -30 mmwc.

LIFT LOBBY PRESSURIZATION 25,000 CFM, SP -30 mmwc.

Supply, fabrication, installation and testing the flexible Canvas connections constructed of fire resistance flexible double canvas sleeve at Duct mouth as per the direction of Engineer-in-charge.

Supply, installation, balancing and commissioning of factroy fabricated G.S.S. (Class VIII 180 GSM) rectangular ducting complete with neoprene rubber gaskets, elbow, splitter dampers, vanes, hangers, supports etc as per approved drawings and confirming to SMACNA standard of following sheet thickness complete as required as per the direction of Engineer-in-charge.Make:Sail/Jindal/Tata. 24 G

Supply, installation, testing and balancing of powder coated Extruded Aluminium Grilles without volume control dampers as per the direction of Engineer-in-charge.Make-Glenstorm/Airflow/Systemaire

Supply, installation, testing and commissioning of G.I volume control dampers as per the direction of Engineer-in-charge. Make-Glenstorm/Airflow/Systemaire

Supply, installation, testing and balancing of External louvers with bird screen as per the direction of Engineer-in-charge.

Supplying & fixing of duct dampers in supply air duct as per approved drawings and specifications. Damper shall be with 16G GSS body and blades as per the direction of Engineer-in-charge.

Supplying, Fixing, testing and commissioning of fire dampers of minimum 90 minutes fire rated in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring, the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal and, in confirmation to IS and as per specifications complete etc. as required as per the direction of Engineer-in-charge..(Make: Air Flow/ Systemair/ Dynacraft) a) Fire Dampers

b) Actuators (Make:- Belimo/ Siemens/ Danfoss)

Supply, installation, testing and commissioning of 250mm Dia Propeller Fans with gravity Louver as per the direction of Engineer-in-charge. MAKE - SYSTEMAIR/ GREENHECK/ ELTA

P.H. WORK Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge. Ground Floor (20mm dia C-PVC pipe (Ashirbad/Supreme/Astrol/Ori Plast)

25mm dia C-PVC pipe (Ashirbad/Supreme/Astrol/Ori Plast)

40mm dia C-PVC pipe (Ashirbad/Supreme/Astrol/Ori Plast)

50mm dia C-PVC pipe (Ashirbad/Supreme/Astrol/Ori Plast)

In 1st Floor (20mm dia C-PVC pipe (Ashirbad/Supreme/Astrol/Ori Plast)

25mm dia C-PVC pipe (Ashirbad/Supreme/Astrol/Ori Plast)

32mm dia C-PVC pipe (Ashirbad/Supreme/Astrol/Ori Plast)

50mm dia C-PVC pipe (Ashirbad/Supreme/Astrol/Ori Plast)

In 2nd Floor (20mm dia C-PVC pipe (Ashirbad/Supreme/Astrol/Ori Plast)

25mm dia C-PVC pipe (Ashirbad/Supreme/Astrol/Ori Plast)

32mm dia C-PVC pipe (Ashirbad/Supreme/Astrol/Ori Plast)

50mm dia C-PVC pipe (Ashirbad/Supreme/Astrol/Ori Plast)

In 3rd Floor(20mm dia C-PVC pipe (Ashirbad/Supreme/Astrol/Ori Plast)

25mm dia C-PVC pipe (Ashirbad/Supreme/Astrol/Ori Plast)

40mm dia C-PVC pipe (Ashirbad/Supreme/Astrol/Ori Plast)

50mm dia C-PVC pipe (Ashirbad/Supreme/Astrol/Ori Plast)

In 4th Floor (40mm dia C-PVC pipe (Ashirbad/Supreme/Astrol/Ori Plast)

50mm dia C-PVC pipe (Ashirbad/Supreme/Astrol/Ori Plast)

Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.250mm thick wall in Ground floor

In 1st Floor

In 2nd Floor

In 3rd Floor

Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. in Ground Floor

In 1st Floor

In 2nd Floor

In 3rd Floor

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor

In 1st Floor

In 2nd floor

In 3rd Floor

Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge .250mm to 375mm thick wall in Ground Floor to 4th Floor

Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge, (Cera Make/ Jaquar Make/ Plaza Make/Hindwrer Make)15mm dia CP Long Body Bib cock (Con-CHR-107KN Make Jaquar , Hindware,Cera or equivelent)

15mm dia CP angle stop cock (FLR-ACR-5053N) Make Jaquar , Hindware,Cera or equivelent

20mm dia CP consealed stop cock(Con-CHR-083KN Make Jaquar , Hindware,Cera or equivelent)

15mm dia CP two in one bib cock (FLR-ACR-5041N) Make Jaquar , Hindware,Cera or equivelent

15mm dia CP Health faucet (Con-ALD-MCH-573 Make Jaquar , Hindware,Cera or equivelent )

15mm dia CP extension piece, (Make Jaquar , Hindware,Cera or equivelent)

15mm dia CP Pillar cock (Con-CHR-011KN (Make Jaquar , Hindware,Cera or equivelent)

25mm dia G.M or Brass F.W valve (Sakti make)

40mm dia G.M or Brass F.W valve (Sakti make)

125mm dia CP gratings

15mm CP revolving shower (Make Jaquar , Hindware,Cera or equivelent) CON-CR-209KN.

15mm dia CP auto closing Urinal Flush Valve (PRS-CHR-077 (Make Jaquar , Hindware,Cera or equivelent)

50mm dia G.M or Brass F.W valve (Sakti make)

15mm dia CP Bib cock (Con-CHR-047KN Make Jaquar , Hindware,Cera or equivelent )

15mm dia CP Urinal Flush valve (PRS-ANQ-077 Make Jaquar , Hindware,Cera or equivelent)

Supply and installation of Rimless Back To Wall WC With UF Soft Close Slim Seat Cover, Hinges, Fixing Accessories And Accessories Set, Size: 340x560x400mm, P-Trap:180mm ARS-WHT-39955P180UFSM, Make Jaquar , Hindware,Cera or equivelent.

Supply and installation of Single Piece Slim Concealed Cistern Body with Installation Kit & “S-Type” drain pipe connection set for Wall Hung WC (without Flush Control Plate) JCS-WHT-2400S, Make Jaquar , Hindware,Cera or equivelent.

Half pedestal basin(Jaquar/Hindware)FNS-WHT-40801+FNS-WHT-40305/No.91049+91115, Make Jaquar , Hindware,Cera or equivelent.

Angle Valve (Jaquar-OPP-SSF-15053PM) Make Jaquar , Hindware,Cera or equivelent

Supply and installation of Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook. (ALD-CHR-573) Make Jaquar , Hindware,Cera or equivelent.

15mm dia CP Pillar cock (Con-CHR-011KN Make Jaquar , Hindware,Cera or equivelent.)

15mm dia CP two in one bib cock (FLR-ACR-5041N) Make Jaquar , Hindware,Cera or equivelent.)

Liquid Soap Dispencer (Jaquar-SDR-BLC-DJ0160ASN) Make Jaquar , Hindware,Cera or equivelent

Supplying all materials, labour, T&P and fitting and fixing 12.50 litres/10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge(Cera Make/ Jaquar Make/ Plaza Make/Hindwrer Make) 10 litres PVC L.L. Cistern (Slimline-white)

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge.110mm dia U-PVC SWR pipe(Ori Plast/Finolex/Supreme Make Type-B)

110mm U-PVC door Tee(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Plain Tee(Ori Plast/Finolex/Supreme Make)

110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)

110mm U-PVC plain bend(Ori Plast/Finolex/Supreme Make)

110mm dia U-PVC Offset without ear(Ori Plast/Finolex/Supreme Make)

110mm U-PVC 'P' trap(Ori Plast/Finolex/Supreme Make)

110mm U-PVC cowl(Ori Plast/Finolex/Supreme Make)

110mm dia U-PVC Plain Shoe Bend(Ori Plast/Finolex/Supreme Make)

110mm dia U-PVC Socket plain(Ori Plast/Finolex/Supreme Make)

110mm dia U-PVC Cross Tee with door(Ori Plast/Finolex/Supreme Make)

75mm dia U-PVC SWR pipe(Ori Plast/Finolex/Supreme Make Type-B)

75mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)

75mm U-PVC plain bend(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Clamp(Ori Plast/Finolex/Supreme Make)

Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan conforming to IS:2556-part-3-2004) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge(Cera Make/ Jaquar Make/ Plaza Make/Hindwrer Make), 580mm size Orissa pan(Essco/Hindware/Cera)

Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the Engineer in charge.(Cera Make/ Jaquar Make/ Plaza Make/Hindwrer Make) Halfstall Urinal(Jaquar/Cera/Hindware)

Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge.(Cera Make/ Jaquar Make/ Plaza Make/Hindwrer Make) E.W.C. with seat cover (Jaquar/Cera/Hindware)

One piece commod(Hindware)ELEMENT Cat No.92084.

EWC(Matrix set )(P-18)of make Hindware/Jaquar/Cera or Equivalent

Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge(Cera Make/ Jaquar Make/ Plaza Make/Hindwrer Make) Under Counter basin(560x450)Jaquar-FLS-WHT-5701/Hindware-No.10095, make Hindware/Jaquar/Cera.

Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge, 600mm x 450mm size B.E mirror

Large size mirror with frame(70x0.90x0.90) 47x0.60x0.90=

Design mirror( make Hindware/Jaquar/Cera.)

Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. 600 x 125mm plate glass shelf with CP guard rails(Jaquar)ACN-CHR-1171N , Make Hindware/Jaquar/Cera.

Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. 25mm x 600mm long CP towel rail ACN-ACR-1111SM Make Hindware/Jaquar/Cera.

CP towel Ring(Jaquar)ACN-ACR-1121N . Make Hindware/Jaquar/Cera.

Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. CP soap holder (Jaquar)ACN-ACR-1131N Make Hindware/Jaquar/Cera.

SOAP DISPENSER WITH GLASS BOTTLE (Jaquar)ACN-CHR-1135N Make Hindware/Jaquar/Cera.

Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge(Cera Make/ Jaquar Make/ Plaza Make/Hindwrer Make) 600 x 450 x 250mm size S/S kitchen sink (Jayana make )

Supplying all materials labour T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge In ground floor

Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard granite chips broken including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C. In Ground Floor

In 1st Floor

In 2nd Floor

In 3rd Floor

Supplying all materials, labour, T&P and providing cement flush pointing with C.M (1:3) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge, In Ground Floor.

In Ist Floor

In 2nd Floor

In 3rd Floor

Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including cement punning,watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In Ist Floor

In 2nd Floor

In 3rd Floor

Supply of all materials & laying the waterproofing material of Dr.Fixit torch shield P3160(3mm)with its primer 2 coats or equivalent water proofing material after drying cleaning the concrete surface over the concrete floor/roof/ balcony/sunken and dado upto 1"6" in wall including cleaning,applying and mending as per specification including cost,conveyance,taxes,royalities of all materials to work site etc.all complete as per the direction of the Engineer-in-charge.In Ist Floor

In 2nd Floor

In 3rd Floor

Supplying all materials, labour, T&P and providing and filling cynder including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge .In Ist Floor

In 2nd Floor

In 3rd Floor

Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.

Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge

Finishing wall surface of walls with providing two coats wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.In Ground Floor

In Ist Floor

In 2nd Floor

In 3rd Floor

Supplying all materials, labour, T&P and distempering two coats to walls with distemper of approved shade on new work to give an even shade etc all complete as per specification and direction of the Engineer in charge.In Ground Floor

In Ist Floor

In 2nd Floor

In 3rd Floor

Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge

Supplying all materials, labour, T&P and constructing Inspection Chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 760mm x 760mm x 460mm

Fitting and fixing RCPC cover slab (0.45m dia)

Supplying all materials, labour, T&P and providing kodappa slab in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge

Supplying all materials, labour, T&P and providing granite tiles in slab, treads and landing on 20mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge

Construction of 30000 Litr.Capacity RCC Over head water storage tank(Domestic & Fire fighting)-In forth floor R.C.C. work of M-30 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge. RCC in Column

RCC in roof beam

RCC in roof slab

RCC Wall

Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.In forth floor

Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance and royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.In forth floor

Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.

Priming one coat with water bound wall cement primer.

Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, all materials, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.

Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and balustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.

Providing fitting and fixing MS cover made out of MS angle and sheet duly welding and fixing with frame and hinges along with locking arrangement of size 60cmx60cm etc complete as per direction of Engineer-in-charge

Wall painting two coats with Weather coat paint (1st quality) exterior grade of approved make & with a approved quality primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge. In forth floor

EXTERNAL PH WORK Sinking of 200mmx150mm dia Bore Well through DTH method.- 2 Nos. Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only.Drilling of 200mm dia bore 0 to 30 mtr

Drilling of 200mm dia bore 31 to 45 mtr

Drilling of 150mm dia bore 41 to 125 mtr

Labour for lowering the following size of PVC casing pipes with or without slotted pipes as per necessity from ground level upto 300 mtrs depth and fitted and set up in perfectly vertical position including cutting and threading of blank pipes and slotted pipes and supplyinging and fixing of all jointing materials ,extra sockets and T&P etc. all complete and keeping the top of casing pipe threaded including plugging the tubewell to prevent entry of foreign materials .Lowering of 200mm dia PVC casing pipes 0 mtr to 30 mtrs

Lowering of 200mm dia PVC casing pipes 31 mtr to 45 mtrs

Cost of 200mm dia PVC schedule - 80 pipe

Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge

Supplying all materials,labour,T&P and providing around sealing by cement concrete grouting of annualr space around GI/PVC housing pipe upto 5 mtr below ground level ( as per drawing ) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer-in-charge . Mimimum one meter of casing pipe to nserted in the bore in to the rock the bottom to ensure sanitary sealing ( excluding cost of cement which willbe supplied by the Department )Sanitary sealing upto 5 mtr below ground level

CC(1:2:4) with 12mm chips for grouting up to 5 mtr Depth in

Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.2HP Three Phase 5 stage submersible pump set.

DOL control panel

50mm S. S. Nipple, S. S. bolt & clips

50mm M. S. Clamp, Bend, Socket & 200mm M. S. well cap

2.50mm Sqm Submersible flat cable

Steel rope with cover

20mm dia rigid U-PVC pipe

50mm dia HDPE pipe

Labour charges for lowering, testing, commissioning & transportation to site etc.

Supply all materials, labour, T&P and providing, fitting and fixing of centrifugal pump set to run on 3phase/1phase line voltage ranging from 320 volt to 450 volt with suitable control pannel, jointing with GI/ PVC/ HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.5 HP 3 phaseHorizontal submerssible pump set.

DOL control panel

Labour charges for lowering, testing, commissioning & transportation to site etc.

Supplying all materials, labour, T&P and providing and laying in trenches PVC ASTM pipe of the following nominal bore, tube fittings, testing all complete as per specification and direction of the Engineer in charge. 50mm dia PVC ASTM

Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes of the following nominal bore and pipe fittings with clamps including making good the wall and testing as per specification and direction of the Engineer in charge. 50mm dia CPVC pipe (sch-80)

Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 mtr in depth and as per direction of the Engineer in charge.

Supplying all materials, labour T&P and fitting and fixing brass/CP/PVC fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge.50mm dia Brass N. R. Valve

50mm dia Brass Check Valve

50mm dia Brass F. W. Valve

Supplying all materials, labour, T&P and construction of Fullway valve chamber/Stop cock chamber of the following inside size for fullway valve with cement concrete slab (1:2:4) mix , 7.50cm thick, foundation concrete (1:5:10) and inside plastering with cement mortar (1:3) finished with a floating coat of neat cement including curing etc all complete as per approved specification and direction of the Engineer in charge. Inside size 250mm x 250mm x 560mm.

Supplying all materials, labour, T&P and construction man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1½:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 910mm x 910mm x 910mm

Addl depth

Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.110mm dia u-pvc pipe alround concrete

160mm dia u-pvc pipe alround concrete

Supplying all materials, labour, T&P and constructing circular type man hole chamber of the following size with cement concrete (1:4:8) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar (1:5), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, 12mm thick cement plaster (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.Circular MH inside dia 1200mmx1670mm with sides sloped upto560mm.

Cost of RCPC Cover

Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV of size 750x570x1350mm height with water storage capacity 120 liters along with 3 nos of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge.Aquagurd Pure Chill 80 PSS UV

UGR(100000ltr) for Fire fighting & 50000 ltrs Domestic UGR with Pump House. Earth work in hard soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge.

Supplying & Filling foundation trenches with excavated earth well watered and rammed in layers not exceeding 30 c.m. in depth with all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and all taxes of sand,cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge.

Supplying & Filling foundation trenches , plinth & ditches with clean course river sand well watered and rammed in layers not exceeding 23 c.m. in depth with all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and all taxes of sand,cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge.

Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.

Disposal of surplus excavted materials by mechanical means from the work side etc. complete. upto 5km. Lead

R.C.C. work of M-30 grade with 20mm and down grade black hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per spection and the direction of the Engineer-in-charge. RCC Base slab & Foundation

RCC wall

RCC Beam & Column

RCC Slab & Chajja

RCC Lintle

Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge.

Supplying all materials, labour, T&P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:6) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge

Supplying all materials, labour,T&P and providing 6mm thick cement plasster (1:4) over CC work including watering curring and conveyance of all materials to site.UGR &Pump House

Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.

Supplying all materials, labour,T&P and providing 12mm thick cement plasster (1:4) over Brick work including watering curring and conveyance of all materials to site.Pump House

Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and balustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.

Supplying and fitting and fixing MS door and windows with grill MS Joist etc including welding with elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.

Providing fitting and fixing RCPC cover etc complete as per direction of Engineer-in-charge

Supplying all materials, labour,T&P and providing distempering two coats on wall surface including watering curring and conveyance of all materials to site.etc complete as per direction of Engineer-incharge

Supplying all materials, labour,T&P and providing weathercoat of approved make and shade on wall surface including watering curring and conveyance of all materials to site.etc complete as per direction of Engineer-incharge

STP 30 KLD. Earthwork in excavation in all types of soil for site leveling, foundation, pits, trenches and other civil works upto and including 1.5 metre depth and stacking the soil upto a lead of 100 metre and including dewatering, removing slush,shoring and strutting (as required), complete as per specification and as directed by the Engineer-In-Charge.

Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-In-charge.

Supplying and filling in plinth with locally available river sand under floors including watering, ramming, consolidating and dressing complete to achieve relative density of minimum 80% (Measured consolidated volume only) complete as per drawing, design and direction of Architect/Engineer-in-charge.

Providing and lying plain cement concrete of proportion (1:4:8) in foundation and floors using Portland slag cement (PSC) with 40 mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties and taxes all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per the instruction of the Engineer-in-Charge.

Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. a) Base

b) Wall/Beam

c) Slab

Supplying, straightening, cutting, bending, placing in position and binding reinforcement steel work in RCC/reinforced brick works as per drawing and specification including preparation of respective bar bending schedule and binding ( Binding wire to be used as per the IS code) etc. all complete as per direction of Engineer-in-charge Cold Twisted bars, Thermo-Mechanically-treated bars.

First class Fly Ash Brick masonry using F.A. bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.

12mm cement plaster on external RCC/brick surfaces in cement plaster 1:6 (1 cement : 6 coarse sand) including necessary scaffolding, curing etc. all complete at all floors and all heights

16mm cement plaster on internal smooth side of RCC/brick surfaces with cement mortar of mix 1:6 (1 cement : 6 fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.

6 mm cement plaster on internal smooth side of RCC/brick surfaces with cement mortar of mix 1:4(1 cement : 4fine sand) including necessary scaffolding, curing etc. all complete at all floors and all heights.

Providing and fixing Steel work welded in built up section/framed (including M.S. angle,plate, sq.bar, flat, m.s.tubular section, Heavy type hinges) work incuding cutting, hoisting, fixing in position and applying apriming coat of approved steel primer, two or more coats of synthetic enamel paint with approved make and brand in grating, frames, guard bar, ladder, railings for balconies and straircase, brackets, gates and similar works as per direction of Engineer-In-Charge. (All structural steel contractor's own supply).

Providing & Applying priming coat with Cement base primer of approved brand and manufacture on plaster/putty surface as per the instruction of Engineer-In-Charge at all elevations and all heights including all material & labour complete.

Providing and applying to outside walls with two or more coats of Anti-Fungal Weather coat water proofing paint including scaffolding and cleaning the surface before application of approved colour and manufacture as per specification, instruction of Engineer-in-charge at all elevations including all material labour complete. in all floors and all heights.

Wall painting two coats with Plastic emulsion paints of approved shade including cost and conveyance of all materials to site, and all labour charges complete as per direction of E.I.C..

Providing & Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the instruction of Engineer - In-Charge at all floors and all heights including all material & labour complete.

MECHANICAL Design, supplying, installing, testing & commissioning of SewageTreatment plant of capacity 30 KLD (excluding all Civil & construction work) for the following duty:Nature of Sewage - Domestic Sewage,Daily average flow -30 cum/day, pH - 6.5 – 8.5,BOD5 - upto 100-200 Mg/L,S. Solids - 100-250 Mg/L,COD - upto 400 Mg/L,Oil & Grease - 30 Mg / L,Coliform - 106 - 107 MPN/100 ML,Sewage discharge standard after treatment,PH - 5.5-9.0,BOD5 - Less than 10 Mg/L,S. Solids - Less than 10 Mg/L,COD - Less than 50 Mg/L,Coliform – traces . Supply, installation, testing & commissioning of Stainless Steel Perforated, 6mm perforated Bar Screen with suitable lifting arrangement with brackets in the sreen sump of (size 600 mm x 2500mm depth approx), SS-304

Supply, installation, testing & commissioning of electronic type level indicator, instrumation and controller for automatic operation of the system with high/low level alarm complete with auxillary NO/NC contacts. Contractor shall ensure submission of detailed GA drawings (Plan & Section), P & I diagram, schematic diagram for the above mentioned component and additional component if so required for the complete working of the STP.

Supply, installation, testing & commissioning of non clogging type Mono block centrifugal sewage transfer pumps capable of handling solids upto 32 mm having C.I casing & Bronze impeller complete with all accessories, motor of required capacity, Pressure gauge on delivery line with isolation cock, level controller (with wiring) to control the level of sump automatically Capacity 2-4 M3/hr each , 1 set = 2 Nos.(1 working + 1 standby)1-Head 10-15 Mts, Power 0.5, Hp RPM 2900

Supply, installation, testing & commissioning of non clogging type Mono-block centrifugal sludge transfer pumps capable of handling solids upto 25 mm having C.I casing & Bronze impeller complete with all accessories, motor of required capacity, Pressure gauge on delivery line with isolation cock, level controller (with wiring) to control the level of sump automatically Capacity 2 M3/hr each , 1 Nos. (1 working) Make- KIRLOSKAR/KSB/CG.Head 10-15 Mts,Power 0.5 Hp,RPM 2900

Twin lobe type rotary air blowers with 1450 rpm suitable motor (1W + 1Sb) capable of delivering 65 cum/hr ( 2 nos. ) of free air at 0.4 kg/cm2 driven through “V” belt or directly coupled through flexible coupling to a TEFCmotor of suitable 2 HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply. complete with silensors,filters ,NRV,SV and divert valaves,Vibration pads etc complete with all acessories 1set=2 Nos (1 working + 1 standby),Make- KIRLOSKAR/KSB/CG.

Supplying, installing, testing and commissioning, of fine bubble diffuser along with membrane of silicone membranes, PVC support pipe(10 ksc pressure rating),PVC fitting, nylon rope braided hose with all accessories to make it retrievable & to provide clog-free oxygen for Aeration Tanks.

MBBR Media Module as per std specification and detailed drawing and technical spec, quantity required as designed (approx 3.0-m3 each ) with support rest etc for the proposed MBBR directed by engineer in charge at site

Hexagonal Tube settler with MSEP rack support and open able bracket /MH and support frame for clarifier unit of size 750 mm long and with end locking arrangement ,the inclination of 51’ is required ,end lock sud have the surface locking arrangement in rack etc (media min approx 4 m3) with all fittings and fixtures as required for clarifier as directed by engineer in charge at site.

Piping (heavy class) in MS/GI/SS/UPVC/HDPE as per the approval of the consultants, to be designed for suitable and corrosion resistance complete or as directed by engineer in charge at site.Make--WELCOME MARKETING / MM AQUA,MS PIPE MAKE -JINDAL/TATA,UPVC PIPE AND FITTINGS -- SUPREME/ASHIRBAD/FINOLEX

TERTIARY TREATMENT PLANT Supplying, installing, testing and commissioning of horizontal single/multistage centrifugal filter feed pump complete ,impeller CI casing . Each pump shall have TEFC 2900 RPM three phase electric motor. The pump shall have cast iron head, base plate SS Shaft/ Impeller/ Intermediate chamber. Pump shall be provided with mechanical seal. The pump shall be suitable for auto/ manual operation. of capacity 2-4 M3/hr @ 35 MWC.(1 W + 1 St by ) MONO-BLOCK PUMP,1 set = 2 Nos.(1 working + 1 standby), Head 30-35 Mts, Power 1.0 Hp,RPM 2900 , Make- KIRLOSKAR/ KSB/CG.

Providing, fixing, testing & commissioning of FRP Tertiary filtration plant MULTI GRADE FILTER (suitable for 3.5 Kg/Sqcm working pressure) complete with initial charge with Gravels/pebbles/sand /silex media , Multiport valves with built in frontal pipe work with back wash system, pressure gauge at inlet, outlet and back wash (each with isolation cock), valves, fittings associated works. Pr Vessel MOC – FRP COMPOSITE VESSEL,Pr Vessel dia/hos – 525 x 1550,Back Wash Period 12 Hrs,Operating Pressure 3 Kg. per sq.cm,Test Pressure 7.5 Kg. Sq.cm.Capacity 4 m3/Hr,Make- AQUANOMICS/STARLITE/TECHLITE.

Providing, fixing, testing & commissioning of FRP water filtration plant ACTIVATED CARBON FILTER (suitable for 3.5 Kg/Sqcm working pressure) complete with initial charge with Gravels/pebbles/Activated carbon , Multiport valves with built in frontal pipe work with back wash system, pressure gauge at inlet, outlet and back wash (each with isolation cock), valves, fittings associated worksworks.Pr Vessel MOC – FRP COMPOSITE VESSEL,Pr Vessel dia/hos – 525 x 1550,Back Wash Period 12 Hrs.Operating Pressure 3 Kg. per sq.cm,Test Pressure 7.5 Kg. Sq.cm.Capacity 4 m3/Hr,MAKE- AQUANOMICS/PENTAIR/STARLITE

Supply, installation, testing & commissioning of Hypochloride dosing system for tertiary water treatment with 100 L . HDPE/PVC tank with lid etc .Capacity of the dosing Pump - 0-4 LPH,Pressure- 4 Kg/cm2,Stroke per minute-55,Make- KANAKDHARA/MILTON ROY/E-DOSE.

A. COMPLETE COMMISSIONING OF SEWAGE TREATMENT PLANT WITH UREA, DAP, COW DUNG, BIO-CULTURE, MAN POWER ALONG-WITH TOOLS AND TACKLES FOR 20 DAYS. B. 1 YEAR MAINTAINANCE SERVICE AND REPLACEMENT WARRANTY(BUT EXCLUDES MAN-POWER,CONSUMABLES ,ELECTRICAL ETC) C. INLET AND OUTLET PARAMETERS TEST REPORT AFTER SUCCESFUL COMMISSIONING FROM POLLUTION BOARD APPROVED LABORATORY.

Please Enable Macros to View BoQ information