REPAIR TO PUMP SET WATER SUPPLY INSTALLATION AND ALLIED WORK AT MIL STN SRI GANGANAGAR.

Amount

Disconnecting electric connections, taking up squirrel cage induction electric motor 415/440V, 50 Hz of capacity 75HP from the existing foundation, Transportation to workshop for repair & rewinding with super enamelled copper winding wire of existing gauge and weight, varnishing and drying complete. Reassembling, bringing back to the installation, making the same functional after re-fixing at the existing location, testing the motor on full load complete all as specified and directed by Engineer-in-Charge.(Make of Motor - Kirlosker)

Disconnecting electric connections, taking up squirrel cage induction electric motor 415/440V, 50 Hz of capacity 60 HP from the existing foundation, Transportation to workshop for repair & rewinding with super enamelled copper winding wire of existing gauge and weight, varnishing and drying complete. Reassembling, bringing back to the installation, making the same functional after re-fixing at the existing location, testing the motor on full load complete all as specified and directed by Engineer-in-Charge.. Make- Crompton Greaves.

Disconnecting electric connections, taking up squirrel cage induction electric motor 415/440V, 50 Hz of capacity 25 HP from the existing foundation, Transportation to workshop for repair & rewinding with super enamelled copper winding wire of existing gauge and weight, varnishing and drying complete. Reassembling, bringing back to the installation, making the same functional after re-fixing at the existing location, testing the motor on full load complete all as specified and directed by Engineer-in-Charge.(Make of Motor - Kirlosker)

Disconnecting electric connections, taking up squirrel cage induction electric motor 415/440V, 50 Hz of capacity 20 HP from the existing foundation, Transportation to workshop for repair & rewinding with super enamelled copper winding wire of existing gauge and weight, varnishing and drying complete. Reassembling, bringing back to the installation, making the same functional after re-fixing at the existing location, testing the motor on full load complete all as specified and directed by Engineer-in-Charge. Make of motor-Crompton Greaves/kirlosker

Disconnecting electric connections, taking up squirrel cage induction electric motor 415/440V, 50 Hz of capacity 15 HP from the existing foundation, Transportation to workshop for repair & rewinding with super enamelled copper winding wire of existing gauge and weight, varnishing and drying complete. Reassembling, bringing back to the installation, making the same functional after re-fixing at the existing location, testing the motor on full load complete all as specified and directed by Engineer-in-Charge. Make of motor-Crompton Greaves/kirlosker

Disconnecting electric connections, taking up squirrel cage induction electric motor 415/440V, 50 Hz of capacity 12.5 HP from the existing foundation, Transportation to workshop for repair & rewinding with super enamelled copper winding wire of existing gauge and weight, varnishing and drying complete. Reassembling, bringing back to the installation, making the same functional after re-fixing at the existing location, testing the motor on full load complete all as specified and directed by Engineer-in-Charge.(Make of Motor - Kirlosker)

Disconnecting electric connections, taking up squirrel cage induction electric motor 415/440V, 50 Hz of capacity 7.5 HP from the existing foundation, Transportation to workshop for repair & rewinding with super enamelled copper winding wire of existing gauge and weight, varnishing and drying complete. Reassembling, bringing back to the installation, making the same functional after re-fixing at the existing location, testing the motor on full load complete all as specified and directed by Engineer-in-Charge.(Make of Motor - Kirlosker)

Disconnecting electric connections, taking up squirrel cage induction electric motor 415/440V, 50 Hz of capacity 5 HP from the existing foundation, Transportation to workshop for repair & rewinding with super enamelled copper winding wire of existing gauge and weight, varnishing and drying complete. Reassembling, bringing back to the installation, making the same functional after re-fixing at the existing location, testing the motor on full load complete all as specified and directed by Engineer-in-Charge. Make-Kirlosker/KALSI/CRI

Disconnecting electric connections, taking up squirrel cage induction electric motor 415/440V, 50 Hz of capacity 3 HP from the existing foundation, Transportation to workshop for repair & rewinding with super enamelled copper winding wire of existing gauge and weight, varnishing and drying complete. Reassembling, bringing back to the installation, making the same functional after re-fixing at the existing location, testing the motor on full load complete all as specified and directed by Engineer-in-Charge. Make-Kirlosker/KALSI/CRI

Disconnecting and taking up centrifugal pump (coupled with 75HP 3 phase elect motor) capacity 40,000 GPH, 60 Mtr head, 1450 RPM, Model No- DSM 100/36, S&D 125x100 mm from the existing foundation. Repair the unserviceable pump by insertion of graphite packing, rubber gasket , studs and greasing etc. Including replacement of unserviceable spare parts reassembling and fixing to its original position, making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-Charge.(Make of pump- Kirloskar). Note: spares to be replaced shall be measured and paid separately as supply only in respective items of BOQ.

Supply only cast iron shaft sleeves.(DE/NDE) for centrifugal pump Model No- DSM 100/ 36, S& D- 125 x 100 mm complete all as specified and directed by Engineer-in-Charge . Make of pump : Kirloskar

Supply only cast iron impeller 1st stage (CI IS 210-FG-200) for centrifugal pump Model No- DSM 100/ 36, S& D- 125 x 100 mm complete all as specified and directed by Engineer-in-Charge . Make of pump : Kirloskar

Supply only cast iron impeller 2nd stage (CI IS 210-FG-200) for centrifugal pump Model No- DSM 100/ 36, S& D- 125 x 100 mm complete all as specified and directed by Engineer-in-charge . Make of pump : Kirloskar

Supply only Set of gaskets (manufacturers standard) for centrifugal pump Model No- DSM 100/ 36, S& D- 125 x 100 mm complete all as specified and directed by Engineer-in-Charge. Make of pump : Kirloskar

Supply only cast iron Wear ring for centrifugal pump Model No- DSM 100/ 36, S& D- 125 x 100 mm complete all as specified and directed by Engineer-in-Charge . Make of pump : Kirloskar

Supply only Cast iron Interstage ring for centrifugal pump Model No- DSM 100/ 36, S& D- 125 x 100 mm complete all as specified and directed by Engineer-in-Charge . Make of pump : Kirloskar

Supply only Cast iron split gland (DE/NDE) for centrifugal pump Model No- DSM 100/ 36, S& D- 125 x 100 mm complete all as specified and directed by Engineer-in-Charge . Make of pump : Kirloskar

Supply only Cast steel pump shaft (CS IS 1570-40C8 hot rolled) for centrifugal pump Model No- DSM 100/ 36, S& D- 125 x 100 mm complete all as specified and directed by Engineer-in-charge . Make of pump : Kirloskar

Supply only Ball bearing No 6307 Make-NBC/SKF for centrifugal pump Model No- DSM 100/ 36, S& D- 125 x 100 mm complete all as specified and directed by Engineer-in-charge . Make of pump : Kirloskar

Supply only Ball bearing No 3307 Make-NBC/SKF for centrifugal pump Model No- DSM 100/ 36, S& D- 125 x 100 mm complete all as specified and directed by Engineer-in-charge . Make of pump : Kirloskar . Note For srl item No 11 to 20:- Genuine spares from authorised dealer shall only be provided and replaced.

Disconnecting and taking up centrifugal pump (coupled with 60HP 3 phase elect motor) capacity 40,000 GPH, 60 Mtr head, 2900 RPM, Model No-CE80x26, S&D 125x100 mm from the existing foundation. Repair the unserviceable pump by insertion of graphite packing, rubber gasket , studs and greasing etc. Including replacement of unserviceable spare parts reassembling and fixing to its original position, making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-charge.(Make of pump- Kirloskar). Note: spares to be replaced shall be measured and paid separately as supply only in respective items of BOQ.

Supply only Shaft sleeve (ST AISI-410H 300 BHN) for centrifugal pumping set Model No-CE 80x26, S& D 125 x 100 mm complete all as specified and directed by Engineer-in-charge . Make of pump : Kirloskar.

Supply only cast iron impeller (CI IS 210-FG 200) for centrifugal pumping set Model No-CE 80x26, S& D 125 x 100 mm complete all as specified and directed by Engineer-in-charge . Make of pump : Kirloskar.

Supply only Pump shaft (CS IS 1570-40 C8 Hot rolled) for centrifugal pumping set Model No-CE 80x26, S& D 125 x 100 mm complete all as specified and directed by Engineer-in-charge . Make of pump : Kirloskar.

Supply only CI wear ring for centrifugal pumping set Model No-CE 80x26, S& D 125 x 100 mm complete all as specified and directed by Engineer-in-charge . Make of pump : Kirloskar.

Supply only Cast iron Gland for centrifugal pumping set Model No-CE 80x26, S& D 125 x 100 mm complete all as specified and directed by Engineer-in-charge . Make of pump : Kirloskar.

Supply only CI Lantern Ring for centrifugal pumping set Model No-CE 80x26, S& D 125 x 100 mm complete all as specified and directed by Engineer-in-charge . Make of pump : Kirloskar.

Supply only CS Impeller nut for centrifugal pumping set Model No-CE 80x26, S& D 125 x 100 mm complete all as specified and directed by Engineer-in-charge . Make of pump : Kirloskar.

Supply only Set of gasket for centrifugal pumping set Model No-CE 80x26, S& D 125 x 100 mm complete all as specified and directed by Engineer-in-charge. Make of pump : Kirloskar.

Supply only Set of Keys (C40) for centrifugal pumping set Model No-CE 80x26, S& D 125 x 100 mm complete all as specified and directed by Engineer-in-charge. Make of pump : Kirloskar. NoteFor srl item No 22 to 30 :- Genuine spares from authorised dealer shall only be provided and replaced.

Disconnecting and taking up centrifugal pump (coupled with 25 HP 3 phase elect motor) capacity 1,80,000 LPH, 20 meter head, 1450 RPM, type-SP6L from the existing foundation. Repair the unserviceable pump by facing, grinding, turning, insertion of graphite packing, greasing etc.Including replacement of unserviceable spare parts reassembling and fixing to its original position, making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-Charge.Make of pump-Kirlosker). Note: spares to be replaced shall be measured and paid separately as supply only in respective items of BOQ.

Supply only Shaft sleeve SP-6L for centrifugal pumping set Model No-SP6L complete all as specified and directed by Engineer-in-charge. Make of pump : Kirloskar.

Supply only cast iron impeller (CI IS 210-FG 200) for centrifugal pumping set Model No-SP6L complete all as specified and directed by Engineer-in-charge. Make of pump : Kirloskar.

Supply onlyPump shaft (CS IS 1570-40 C8 Hot rolled) for centrifugal pumping set Model No-SP6L complete all as specified and directed by Engineer-in-charge. Make of pump : Kirloskar.

Supply only Wearing plate NDE SP6LA for centrifugal pumping set Model No-SP6L complete all as specified and directed by Engineer-in-charge. Make of pump : Kirloskar.

Supply only Cast iron Gland for centrifugal pumping set Model No-SP6L complete all as specified and directed by Engineer-in-charge. Make of pump : Kirloskar.

Supply only Ball bearing No 6307 of make-SKF or equivalent in NBC for centrifugal pumping set Model No-SP6L complete all as specified and directed by Engineer-in-charge. Make of pump : Kirloskar.

Supply onlySpherical rollar bearing No 22308C of make-SKF or equivalent in NBC for centrifugal pumping set Model No-SP6L complete all as specified and directed by Engineer-in-charge. Make of pump : Kirloskar.

Supply only Rubber flap assembly for centrifugal pumping set Model No-SP6L complete all as specified and directed by Engineer-in-charge. Make of pump : Kirloskar. Note For srl item No 31 to 39:- Genuine spares from authorised dealer shall only be provided and replaced.

Disconnecting and taking up self priming centrifugal pump (coupled with 25 HP 3 phase elect motor) capacity 180000 LPH, 20 Mtr head, 1410 RPM, SP6L from the existing foundation. Repair the unserviceable pump by facing, grinding, turning, replacement of bearings with greasing, cast iron impeller, resetting and machining of shaft , gun metal bearing bush, and studs .Reassembling and fixing to its original position, making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-Charge.(Make Kirloskar.).

Disconnecting and taking up centrifugal pump (coupled with 20 HP 3 phase elect motor) capacity 50 LPS, 19 Mtr head, 1450 RPM, type-BCP100x260 from the existing foundation. Repair the unserviceable pump by facing, grinding, turning, replacement of bearings with greasing, cast iron impeller, resetting and machining of shaft , gun metal bearing bush, and studs .Reassembling and fixing to its original position, making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-Charge.(Make of pump-Beacon).

Disconnecting and taking up centrifugal pump (coupled with 15 HP 3 phase elect motor) capacity 14.81 LPS, 34 Mtr head, from the existing foundation. Repair the unserviceable pump by facing, grinding, turning, replacement of bearings with greasing, cast iron impeller, resetting and machining of shaft , gun metal bearing bush, and studs .Reassembling and fixing to its original position, making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-Charge.(Make of pump Kirloskar)

Disconnecting and taking up monoblock pumpset (prime mover 20 HP 3 phase elect motor) capacity 39200 GPH, 19 Mtr head, 2900 RPM, type-MEGA from the existing foundation. Repair the unserviceable pump by facing, grinding, turning, replacement of bearing with greasing, cast iron impeller, resetting and machining of shaft, gun metal bearing bush, and studs.Reassembling and fixing to its original position, making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-Charge.(Make of pump-KSB).

Disconnecting and taking up monoblock pumpset (prime mover 20 HP 3 phase elect motor) capacity 29.7 LPS, 30 Mtr head, 2900 RPM, type-KDS2050 from the existing foundation. Repair the unserviceable pump by facing, grinding, turning,replacement of bearing with greasing, cast iron impeller, resetting and machining of shaft , gun metal bearing bush, and studs.Reassembling and fixing to its original position, making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-Charge.(Make of pump-Kirlosker).

Disconnecting and taking up monoblock pumpset (prime mover 15 HP 3 phase elect motor) capacity 24.3/23.7 LPS, 29.5 Mtr head, type-KDS1537 from the existing foundation. Repair the unserviceable pump by facing, grinding, turning,replacement of bearing with greasing, cast iron impeller, resetting and machining of shaft , gun metal bearing bush, and studs.Reassembling and fixing to its original position, making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-Charge.(Make of pump-Kirlosker).

Disconnecting and taking up monoblock pumpset (prime mover 12.5 HP 3 phase elect motor) capacity 25 LPS, 25 meter head, 2900 RPM, type-KDS-1331 from the existing foundation. Repair the unserviceable pump by facing, grinding, turning, insertion of graphite packing, cast iron impeller, replacement of bearing,greasing, resetting and machining of shaft, gun metal bearing bush, and studs.Reassembling and fixing to its original position, making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-Charge.(Make of pump-Kirlosker).

Disconnecting and taking up monoblock pumpset (prime mover 7.5 HP 3 phase elect motor) from the existing foundation. Repair the unserviceable pump by facing, grinding, turning, insertion of graphite packing, cast iron impeller, replacement of bearing, greasing, resetting and machining of shaft, gun metal bearing bush, and studs.Reassembling and fixing to its original position, making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-Charge.(Make of pump-Kirlosker).

Disconnecting and taking up monoblock pumpset (prime mover 5 HP 3 phase elect motor) capacity 20 LPS, 20 meter head, type-MBN of make-CG or other equivalent model of Kirlosker from the existing foundation. Repair the unserviceable pump by facing, grinding, turning, insertion of graphite packing, cast iron impeller, replacement of bearing,greasing, resetting and machining of shaft, gun metal bearing bush, and studs.Reassembling and fixing to its original position, making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-Charge.

M&L servicing of pumpsets 2 HP to 3 HP alongwith motor(any type) including replacment of suitable mechanical seal and packings, coupling repairs, replacment to beaings, resetting and maching of shaft, bearing bush and studs and reassembling and fixinf to its original position, making mechanical connections and testing pumping set complete all as specified and directed by Engineer-in-charge.

S&F in replacement, MCCB 4 pole, 415V, with electronic release (microprocessor based) 100 Amps with breaking capacity 36 KA complete all as specified and directed by Engineer-in-charge.

S&F in replacement, MCCB 4 pole, 415V, with electronic release (microprocessor based) 200 Amps with breaking capacity 36 KA complete all as specified and directed by Engineer-in-charge

S&F in replacement, MCCB 3 pole, 415V, with electronic release (microprocessor based) 160 Amps with breaking capacity 36 KA complete all as specified and directed by Engineer-in-charge

S&F in replacement, MCCB 3 pole, 415V, with electronic release (microprocessor based) 63 Amps with breaking capacity 36 KA complete all as specified and directed by Engineer-in-charge

S&F in replacement, 3 pole AC power contactors, 415 volt rating coil, freedom series, suitable for 60 KW/75 HP, 3 phase electric motor starter complete all as specified and directed by Engineer-in-charge. Cat No-BCH15MT.3.00.380 of make - BCH.

S&F in replacement, 4 pole AC power contactors, 415 volt rating coil, NHD series, suitable for 20 HP, 3 phase electric motor starter complete all as specified and directed by Engineer-in-charge. Cat part No -N1N of make - BCH.

S&F in replacement, Oil immersed Fully automatic star-delta starter with bi-metalic relay suitable for 400V,3 Phase AC,50 Hz, 15HP Electric Motor including initial fill of starter oil and making elect connection and testing Type-KF-40 complete all as specified and directed by Engineer-in-charge. Make-Bentex-Kelsons or equivalent in L&T/Havells.

S&F in replacement, direct on line citation motor starter 415V coil suitable for 2 HP/1.5KW, overload relay range-2.4-3.8 Amp, complete with SS enclosure complete all as specified and directed by Engineer-in-charge. Cat Part No-NAGLEN of make-BCH or equivalent in L&T/Siemens/ABB

S&F in replacement, three phase preventer for 75/60 HP pump motors complete all as specified and directed by Engineer-in-charge

S&F in replacement power contactor suitable for L&T ML6 FASD starter as recommended by OEM complete all as specified and as directed by Engr-in-Charge.

S&F in replacement power contactor suitable for L&T ML4 FASD starter as recommended by OEM complete all as specified and as directed by Engr-in-Charge.

S&F in replacement timer block suitable for L&T ML6 FASD starter as recommended by OEM complete all as specified and as directed by Engr-in-Charge.

S&F in replacement timer block suitable for L&T ML4 FASD starter as recommended by OEM complete all as specified and as directed by Engr-in-Charge.

S&F in replacement overload relay L&T ML6 FASD starter as recommended by OEM complete all as specified and as directed by Engr-in-Charge.

S&F in replacement overload relay L&T ML4 FASD starter as recommended by OEM complete all as specified and as directed by Engr-in-Charge.

S&F in replacement overload relay suitable for BCH 15 T.3.00.380 for 75 HP pumpset as recommended by OEM complete all as specified and as directed by Engr-in-Charge.

S&F in replacement overload relay suitable for BCH N1N star delta starter for 20 HP pumpset as recommended by OEM complete all as specified and as directed by Engr-in-Charge.

S&F in replacement, mild steel coupling and supply and fix mild steel coupling complete with tyre No-TC-11 of make-Unique/ Power/ Supreme complete all as specified and directed by Engineer-in-charge

S&F in replacement, mild steel coupling and supply and fix mild steel coupling complete with tyre No-TC-17 of make-Unique/ Power/ Supreme complete all as specified and directed by Engineer-in-charge

S&F in replacement, mild steel coupling and supply and fix mild steel coupling complete with tyre No-TC-19 of make-Unique/ Power/ Supreme complete all as specified and directed by Engineer-in-charge

M&L for preparation of old painted surfaces of any description or girth and applying spray painting with synthetic enamel paint of desired colour on MS pipe, gates, door etc of any size complete all as specified and directed by Engineer-in-Charge.

Supply only copper thimbles 25 sqmm as specified and as directed by Engr-in-Charge.

Supply only copper thimbles 35 sqmm as specified and as directed by Engr-in-Charge.

Supply only PVC nylon braded pipe of dia 50mm complete all as specified and directed by Engineer-in-Charge.

S&F in replacement FASD starter suitable for 15 HP pumpset, complete with panel and accessories incl timer blocks, relays, phase preventer etc as specified and as directed by Engr-in-Charge. Make: BHC/L&T or in eq.

S&F in replacement sub main wiring single core FRLS PVC sheathed insulated copper cable of 35 sqmm size, multi stranded 1100 volts grade drawn-through existing underground GI pipe or in starter panel etc complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement sub main wiring two core FRLS PVC sheathed insulated copper cable of 10 sqmm size, multi stranded 1100 volts grade drawn-through existing underground GI pipe or in starter panels etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Cast iron fittings (ISI marked) 200 mm to 300mm bore such as bends (any type, radius & angle), Tapers any type (straight, bend, increasing, decreasing or double socket etc), Tee pieces, single branch, “Y” junction, double branch, cross (all sockets or socket & spigot), collars, caps & plugs suitable for flanged pipes, complete complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Cast iron Connecting pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth for CI pipe 100 mm to 150mm bore suitable for flanged pipes, complete, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Cast iron fittings (ISI marked) 100 mm to 150 mm bore such as bends (any type, radius & angle), Tapers any type (straight, bend, increasing, decreasing or double socket etc), Tee pieces, single branch, “Y” junction, double branch, cross (all sockets or socket & spigot), collars, caps & plugs suitable for flanged pipes, complete, fixed complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Cast iron Connecting pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth for CI pipe 200 mm to 300mm bore suitable for flanged pipes, complete, fixed complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of starter panel box of size appx 0.7mX0.7mX0.2m , made out of CRCA mild steel sheet, thickness 2.25 mm single door with lock arrangement alongwith housing for voltmeter and ampere meter suitable for fixing 10 HP to 20 HP motor starters and MCCBs, suitable bus bars capacity 200 Amp, connection arrangements etc including taking down existing starters, MCCBs , refixing them complete and fixing in wall with suitable cutting,cement work etc all as specified and directed by engr in Charge

Testing out water sample in containers and getting the water tested from the department of water test examination with PHED water test laboratory at sri Ganganagar or any NABL accredited lab for chemical and bacteriological test complete all as specified and directed by Engineer - in - Charge. Parameter (test periodicity: As per requirement and as directed by Engineer - in - Charge. (a) (i) Colour (ii) Turbidity (iii) Residual Chlorine (iv) Total chlorine (b) (i) pH (ii) Chloride (iii) Flouride (iv) Iron (v) Hardness (vi) Total plate count (vii) Electrical conductivity (viii) Sulphate (ix) Nitrate (x) BOD test (xi) COD test (c) Bacteriology tests (i) E Coli Test

Note : Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

singh enterprises

Gyan Chand Marothia Engineer Contractor And Suppliers

AYUSH BUILDERS