PROVN OF VARIOUS MAJOR REVENUE AND MINOR WORK AT AFS OJHAR

Amount

Demolition of brickwork built in cement mortar including Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete artic complete all as specified and as directed by Engr-in- Charge.

M & L for forming jambs in Cement concrete 1:4 to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complet all as specified and as Directed .

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Soft and loose soil all as specified and as directed by Engr-in-Charge.

M & L for PCC 1:4:8 Type D2 (using 40mm stone aggregate ) as in foundations filling and mass concrete complete all as specified and as directed.by Engr-in-Charge.

M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 including trapozedial shape of brick work as in drain/ compound wall/ Culver or as per requirement all as specified and as directed by Engr-in- Charge.

M & L for Rendering 10 mm thick in cement mortar 1:6 on brick work or concrete surfacces and stone masonary and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M & L for Rendering 15 mm thick in cement mortar 1:6 on brick work or concrete surfacces and stone masonary and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M & L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as Specified and as directed by Engr-in-Charge.

M & L for 75mm thick plain Cement Concret 1:4:8 Type D2 (using 40mm stone aggregate ) as in Sub Base complete all as specified and as directed.by Engr-in-Charge.

M & L for PCC 1:2:4 Type B1 (using 20mm stone aggregate ) as in Sub floor complete all as specified and as directed.by Engr-in-Charge.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor including screed bed 15mm thick in CM 1:4 complete all as specified and as directed by Engr-in-Charge.

M & L for coloured glazed ceramic tiles 300 mm x 450 mm & 7 mm thick on vertical surfaces of colour patteren as approved and as per manufacturers catalouge such as skirting, dados etc, set and jointed in neat cement slurryand pointed in white or coloured cement to match tiles colour complete all as specified and as directed by Engineer-In-Charge.

S & F 20mm Mrable tile machine cut in Skirting /dado/ jams laid over 15mm thick cemet Screed 1:4 and jointed with gray cement slurry including cutting and pointing complete all as specified and as directed by Engr-in-Charge.

S&F aluminium powder coated frame for louvers section of size 75x40x1.6mm including 4mm thick glass in louvors of 100 mm width with glazing cleat and revolving arrangement of standard section of aluminium including rubber packing, aluminium beading or gasket for for aluminium sections for fixing glass sheet and necessary fittings complete screws plugs, handle, tower bolt, stay hooks including fixed Aluminium wire cloth etc all as specified and directed by Engineer in Charge.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan

S&F 28-30 mm thick Prelaminated moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on both side with wood grain texture with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified and as directed by Engr-in-Charge.

S&F 100 mm long stailess steel Butt hinges, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and as directed.

S&F 150 mm long Extruded stainless steel handles designer type, fabricated type polished complete all as specified and as directed.

S&F 150mm size stainless steel barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S& F 200mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed

Formwork to soffits of suspended slab sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

M & L for Reinforced cement concrete in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and as directed by Engr-in-Charge.

S & F for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge.

M & L for rendering 5 mm thick on uneven faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.

M & L for 10mm thick in cement plaster of CM 1:3 mixed with water prrofing compound @ 2% by weight of cement to have a smooth finish for laying of water profing membrance. (Note-WPC will be measured separetely)

Supply only integral water proofing compound complete all as specified and as directed.

M & L for applying evenly a tack coat of hot blown bitumen 85/25 grade @ 1.2Kg/sqm over a coat of primer @ 0.40 kg/sqm including clearance surfaces of plastered surface of roof througly all as specified.

M & L for APP based polyeric water proofing membrance 3mm thick reinforce with polyster non wooven fabric (wt 3.00 Kg per square meter membrance) laid over roof surface with 100mm over lap and including vertical surface upto required height and tucking into grooves and sealing complete with thermofusion laid by troch application method including applying two coat of bituminous aluminium paint @ 100 gms per square meter over membrane all as directed. Make:- M/s IWL Ltd or M/s STP Ltd or M/s Tiki Asphalt hyadrostop.

S&F rotantional moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed. Note :- Rate quoted shall include installing Gate valve also.

M & L for 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixe complete all as specified and as directed.

S&F in wash basin, Vitreous China white flat back of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand but excluding taps, waste, chain and plugs and proclain stopper but including brackets. complete all as specified and as directed.

S & F 15mm Brass CP Basin mixer for mixing hot & cold water screwed down for iron/UPVC/CPVC pipe and fixed complete all as specified and as directed by Engr-in-Charge .

S & F in vitreous china wash down water closet pedestal pattern (EWC) white excluding flushing cistern & Incl white seat cover of same make closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and flush pipe.Complete all as specified and directed by Engineer-in-charge.

S&F in PVC connection 15mm size with PTMT nuts of length 450 fixed complete all as specified and directed.

S & F 15mm Brass CP wall mixer for mixing hot & cold water screwed down for iron/UPVC/CPVC pipe and fixed complete all as specified and as directed by Engr-in-Charge .

S&F in bib taps two way,15mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and. complete all as specified and as directed.

Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all as specified and as directed.

S & F in repair fancy type chromium plated 15 mm bore angle cock, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S&F in repair PVC 10 Ltrs valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc. ISI approved complete all specified and directed.

Supplying and laying of CPVC 16 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors concealed and joints fixed with adhesive complete all as specified & directed.

Supplying and laying of CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors concealed and joints fixed with adhesive complete all as specified & directed.

S & F in repairs 100 mm dia CP brass shower rose swivel type with extension CP rod 15mm dia and 300mm long with connecting rod suitable for 15mm bore pipe .Complete all as specified and directed by Engineer-in-charge.

S & F in repairs SS Towel ring fixed with and including Chromium plated brass screws complete all as specified and as directed by Engr-in-Charge.

S & F in Repair Brass chromium plated tubular towel rail 20mm dia 60cm long with and including flanges complete all as specified and as directed by Engineer-In-Charge

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets guard and railing 60cm long complete all as specified and as directed. Note ;- All the items needed to fix shelf assembly are included in this above item (exept shelg glass and CP railing )

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf corner shelf with chromium plated brackets guard and railing complete all as specified and as directed. Note ;- All the items needed to fix shelf assembly are included in this above item (exept shelf glass and CP railing )

S & F soap dish stainless steel as approved by GE complete all as specified and as directed by Engineer-In-Charge.

M&L hardcore of gouge n exc 63mm broken stone or boulder, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed by Engr-in- Charge

M & L for 75mm thick Cement Concrete 1:3:6 type C2 ( using 40 mm graded stone aggregate) as in Plinth protection complete all as specified and as directed by Engr-in- Charge.

M & L for forming contraction (Dummy) joints 65mm deep and 10mm wide filled with sealing compound grade 'B' complete all as specified and as direced.

M&L for preparation of new plastered walls surfcaes and applying two coats of weather proof exterior emulsion paint over and including priming coat of exterior primer over white cement based putty including sand papering the puttied surfaces to form an even and smooth surface whereever required over new or untreated plastered surfaces to be applied with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls/ceiling and applying two coats of oil bound distemper over a coat of alkali resistant primer over wall care putty including sand papering the puttied surfaces to form an even and smooth surface whereever required using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper/ primer should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.

M & L for reinforced cement concrete pipes class NP-3 laid in jointed complete with collers ,bore of pipe 150mm Complete all as specified and directed by Engineer-in-charge

M & L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate, bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in bore of pipe 150mm.Complete all as specified and directed by Engineer-in-charge.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required (internal dia of pipe 200mm )Complete all as specified and directed by Engineer-in-charge.

S& F PVC (SWR) pipes 110mm dia single, socketed in any length ,with rubber ring joints fixed to walls with MS clamps all as directed by Engr in charge. (Work will be scattered in varius bldg in Domestic and technical area.

S&F PVC (SWR) bends 110mm dia

S& F PVC (SWR) pipes 75mm dia single, socketed in any length ,with rubber ring joints fixed to walls with MS clamps all as directed by Engr in charge. (Work will be scattered in varius bldg in Domestic and technical area.

S&F PVC (SWR) bends 75mm dia

M & L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S & F PVC 110mm Vent Cowl complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick with soils.Complete all as specified and directed by Engineer-in-charge.

Removing surplus excavated material (Soils) to distance of exc. 1.50m bu n. exc. 5.00 km and depositing where directed at a level n. exc. 1.5 m above the starting point. complete all as specified and as directed by Engineer-In-Charge

S&F Exhaust fan 300 mm sweep, 4 blade ( PVC ) with louvers, operated on 230/240V AC Single phase electric supply complete duly grauted bolts in the wall fixed with nuts, bolt and washers complete matching with the existing including connecting with 3 core stranded copper conductor cable cordas as per manufacture recommendation from ceiling rose to exhaust fan connector complete all as per specified and directed by Engr-in- Charge . Make Crompton, havells , Usha

Point wiring with 1.5 Sqmm (nominal area) PVC ( FRLSH) insulated sheathed copper stranded conductor cable run in and including concealed in wall/floor PVC conduit not less than 20 mm as per IS with all fittings such as bends, tee,junction boxes,etc of suitable size including 1.5 Sqmm PVC(FRLSH) insulated copper earth continuity conductor connected to common earth dolly and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc for one light/fan/call bell point controlled by one 1- way switch complete all as specified and as directed by Engr -in -Charge.

All as per item above but for One 5 Amps socket point on same/below board with other switches.

All as per item above but for One 5amps switch socket point independent.

Supply and fix Modular Socket outlet 6A/16 Amps 2/3 pin combined 2 module Make : Anchor/Roma. ,Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix Modular switch one way 6 Amp,1 Module , Make Anchor/Roma/Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix Ceiling rose surface type, PVC/Polycarbonate isolated body size 50x28 mm three terminals. Make : AnchorHavells Rio.,Complete all as specified & as directed by Engineer-In-Charge.

S & F and connecting up LED 20 watt fitting 6500K 4 feet with 120 lumen/watt,aluminum housing extruded in thermal conductive material with powder coated in white colour Extruded serration High Optically efficient plastic FR grade material in milky white,Spring Steel Nickel plated,Inj. Moulded engineering plastic Brown in colour Five year written warranty from manufacturer including 23/00.0076 size 3 core copper flexible wire from connector to ceiling rose/adoptor including all necessary fixing arrangements complete. Crompton cat No CCS-100-20-65-HL2-DP-NWH or equivalent in Philips/Havells/Wipro ).

S & F and connecting up LED 5 watt fitting 6500K 1 feet with 100 lumen/watt,aluminum housing extruded in thermal conductive material with powder coated in white colour Extruded serration High Optically efficient plastic FR grade material in milky white,Spring Steel Nickel plated,Inj. Moulded engineering plastic Brown in colour Five year written warranty from manufacturer including 23/00.0076 size 3 core copper flexible wire from connector to ceiling rose/adoptor including all necessary fixing arrangements complete. Crompton cat No CCS-103-05-65-SL-DP-NWH or equivalent in Philips/Havells/Wipro ).

Supply, installation, testing and commissioning of storage type electric water heater of capacity 25 Ltrs, AC 240 Vot, 50 Hz. 5 star rating, verticle type duly fixed to existing wall where directed including suitable mounting bolts, nuts and washer duly grouted including necessary accessories such as safety valve, thermostat, NRV, inlet/ outlet water connection piece etc including writing MES No on geyser with white synthetic enameled paint complete all as specified and as directed Note: (i) Cutting and making good of chases in the wall/roof/floor is deemed to be included in the quoted rates (The wiring for geyser shall be independent from main DB of individual quarter to geyser power socket is deemed to be included in the quoted rates.

M&L wiring for circuit/ sub main wiring of 2x4 Sqmm + 1x4 Sqmm earth wire, alongwith eart wire PVC (FRLSH) insulated copper conductor, single core, 1100 v grade cable in surface/ recessed as required in PVC casing caping complete all as directed by Engr -in- Charge.

Supply & Install ,testing & commissioningof Flameproof/ weatherproof Air Conditioning unit of 1.5 TR capacity with condesing unit GI body to kept in hazardous area along with emerson make hermetically sealed explosion proof compressor r-407 eco friendly along with control panel, lamp- 230 V AC 3 nos power on, compressor on, cooling on, motor on, with temparatuer indicator 2 relay out flameproof RTD PT 100 3 wire, classificatioon area – zone I & ll gas group llA, llB, IIC with dust protection zone 21 & 22 certification – CIMFR dhanbad and PESO (CCOE) , Cat Part No. SSPL/HC/508 Make: Shyam swithgears pvt ltd or equivalent complete all as specified & directed by Engineer-In-Charge. (Note- Aceessories like powder coated MS standing frame, copper pipe of required size with insulation sleeves, 25 mm water drain pipe, 2.5 sqmm x 3 copper flexible cable for power supply are deemed to be included in quoted rate.)

M&L Flameproof sub main wiring of 2x4 Sqmm + 1x4 Sqmm earth wire, alongwith eart wire PVC (FRZH) insulated copper conductor, single core, 1100 v grade cable including in conceled steel conduit medium grade conduit not less than 20 mm as per IS with all flame proof fitting such as bent, tees, junction box etc of suitable size complete all as directed by Engr -in- Charge.

M&L for air termination single pointed aluminium rod 12 mm dia and 300mm long duly fixed on 150 x 150 x 200mm height PCC casting and insulating material on top complete all as specified and directed

M&L for aluminium strip 25× 3.15 mm thick with saddles & fixing screw etc for roof conductor & down conductor mounted wall on porcelin insulators complete all as specified and directed .

M&L for PCC block on roof top comprising of type C1 1:3:6 20 mm graded aggregates of suitable size at places where directed & laying,clamping the strip any size secured on the block with suitable size GI bolt duly grouted, nut bolt washer etc.

M&L for test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25mm drilled and screwed including 3nos 8mm dia 25mm long hex head screw complete all as specified and directed by Engr- in- charge.

Supply & fix GI strip 32×6 mm buried in ground complete all as as specified & as directed.

M&L for earthing including taking out GI plate with pipes earthing lead fasteners etc and earthing complete with galvanised steel earth plate electrode 600x600x6mm thick,burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of the pl;ate not less than 1.5 Mtr below normal ground level,connected to galvanised iron strip 32x6 mm as earth lead by means of bolts,nuts ,washer and check nut of galvanized steel, protected by and including GI pipe 50 mm bore (light grade) and connected to test point as directed and including cement concret pit in 1:2:4 type B1 using 12.5mm graded aggregate, with cast iron miled steel frame embedded in the concrete enclouser fineshed flushed & CI cover 10 mm thick of size (300mmx300mm CI) having locking arrengment hinged to CI frame all as shown under electrical plate of SSR Pt - I 2009 and as directed including painting the external surface of chamber & cover with enamel paint in diffrent colour as directed and writing earth results & date of test carried out with white paint on black painted background, wiremesh funnel 20 mm bore GI pipe medium grade for watering adequate quantity of charcol and common salt in alternate layer of 15cm 3ft x 3ft thick all around the electrode including necessery excavation & earth work in any type of soil complete testing on completion all as directed. Note:- i) Filling the pit with black cottan soil brought at site. ii) The excavated soil will be removed & paid separtely.

Supply & laying, jointing and testing GI water tubing light grade with all fitttings in trenches for bore of 50 mm dia , complete all as specified and as directed by Engineer-In-Charge.

Supply and fix 40mm dia bore galvanized iron tubing, light grade including all fitting for cable protection etc laid in floor or fixed to poles with clamps etc all as specified and directed.Make- Prakesh surya/Swastik/Jindal.

Supply and fix HDPE non pressure 50 mm dia pipe, smooth wall, non metallic flexible, suitable for underground use, pressure rating not less than PN 2.5, minimum wall thickness 2.5mm for protection of GI strip/conductor passing through the wall and from test point upto plinth protection complete all as specified and directed by Engineer-In-Charge.

M & L for cutting PQC / Hardstanding at ground run point using diamond cutter tool for inserting pipe of dia 50 mm upto the required depth and filling the gap with epoxy resin to match with existing surfce.

Supply, install, testing & commissioning hi wall split unit indoor/outdoor complete with cordless remote control unit and inverter type with minimum 5 star rating air conditioner electric driven, single phase of capacity 1.5 TR, with rated cooling capacity of 6200 watt at 100% and higher EER incl anti dust with anti microbial coating as specified and as directed by engineer-in-charge.Make Voltas, Hitachi , Blue star , carrier. Note- The rates of copper cooling tubing of suitable size up to 10 mtr is deemed to be included in the quoted rates. incl taking down on unserviceable AC any make and size from site / Hanger ( up to 15 mtr height ) and deposited the same in MES store yard for further disposal. Note - (1) The rates of copper cooling tubing of suitable size with clamp up to 10 mtr is deemed to be included in the quoted rates. (2) The rates of AC bracket of each AC is deemed to be included in the quoted rates. (3) The rates for Gas charging is deemed to be included in the quoted rates.

Supply & Fix voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 150 V to 280V with output voltage stabilized at 230V with accuracy of 2.5% and capacity of 4 KVA, Make V-Guard Model No VND-400 or equivalent as approved by accepting officer. Complete all as specified and as directed by engineer in charge.

Supply and fix in repair PVC Box with Switch socket combination outlet 5 pin 6 Amps 16 Amps 2 in 1 flush type.Make: Anchor/Havells Rio.,Complete all as specified & as directed by Engineer-In-Charge.Make

Supply and fix MCB SPN 6-32 Amps, AC, 240V, 50 Hz, C series complete all as specified and directed.

Supply and fix MCB SP 6-32 Amps, AC, 240V, 50 Hz, C series complete all as specified and directed.

Supply and fix in repair Sheet metal enclosure for DB’s SPN, with 100 amps rated bus bar , 4 way ,240 volts double door. Make : Standard/HPL/Legrand.,Complete all as specified & as directed by Engineer-In-Charge.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out in soft loose soil all as specified and directed

Removing excavated soil to a distance not exce 50 mtr and deposited where directed at a level not exceding 1.5 mtr abvoe the starting point all as specified and directed.

Supply & Fixing XLPE insulated PVC sheathed armoured LT 1100 volt grade aluminimum conductor cable of size 10 sqmm 4 core complete all as specified & as directed by Engr-in-Charge.

Supply and laying Double walled corruyated (DWC) Duct (Dura- Guard) as per IS-14930 Part - II for LT UG cable protection including coupler, elbows, T- Joint, Bends, etc and test report Make :- Dura- line/Gemini/Rex. Of size 38mm

M& L for boring of holes under road, pavements hard standing not less than 0.7 mtr below ground level by trenchless technology by doing excavation at both side of and passing the seamless 150 mm dia HDPE pipe by bringing complete set up at site. complete all as specified & as directed by Engr-in-Charge.

Supply and fixingTempra plug & socket DB TPN with a three pin and earth plug & socket complete with one no MCB 32 Amp TPN, 240 V Make- Legrand Cat. Nos 507863 or equivalent Make :Siemens/ L&T,complete all as specified & as directed by Engineer-In-Charge

M&L wiring for circuit/ sub main wiring 3x10 Sqmm+2x10.0 Sqmm earth wire PVC (FRLSH) insulated copper conductor, single core, 1100 v grade cable in surface including in PVC conduit of suitable size complete all as specified and directed by Engineer-In-Charge. for BUS BAR connectio .

Supply and fixing PVC flexible copper cable multistranded 5 core 2.5 sqmm

Supply and laying in trenches/ducts or passing through pipe 1100 volt grade LTUG cable with XLPE insulated armored heavy duty electric cable with aluminium conductor 1100V grade 4 core cross sectional area 16 sqmm all as spfd and directed laid in trench or passing through pipe.

Supply, install, testing, & commissioning of Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 150 V to 280 V with output voltage stabilized at 230 V with accuracy ± 2.5% and of capacity 4 KVA, Complete all as specified and as directed as Engineer-In-Charge.

M&L wiring for circuit/ sub main wiring 2x4 Sqmm+1x2.5 Sqmm earth wire PVC (FRLSH) insulated copper conductor, single core, 1100 v grade cable on surface as required including in PVC casing caping complete all as specified and directed by Engineer-In-Charge

Supply and fix Switch socket combination outlet with PVC box 3 pin 16 Amps 1 flush type. Make: Anchor/Havells Rio., Complete all as specified & as directed by Engineer-In-Charge.

Supply and fix in repair Sheet metal enclosure for DB's SPN, with 100 amps rated bus bar 8 way,240 volts double door, Complete all as specified & as directed by Engineer-In-Charge

Supply and fix in repair MCB SP 6 to 32 Amps 240 volts 10 KA C series. MCB with separate short circuit indication type, Complete all as specified & as directed by Engineer-In-Charge

Supply and fix in repair MCB SPN 6 to 32 Amps 240 volts 10 KA. Complete all as specified & as directed by Engineer-In-Charge

Supply, install, testing & commissioning hi wall split unit indoor/outdoor complete with cordless remote control unit and inverter type with minimum 5 star rating air conditioner electric driven, single phase of capacity 2 TR, with rated cooling capacity of 6200 watt at 100% and higher EER twin rotary BLDC compressor incl anti dust with anti microbial coating as specified and as directed by engineer-in-charge.Make Voltas, Hitachi , Blue star , carrier. Note- The rates of copper cooling tubing of suitable size up to 10 mtr is deemed to be included in the quoted rates. incl taking down on unserviceable AC any make and size from site / Hanger ( up to 15 mtr height ) and deposited the same in MES store yard for further disposal. Note - (1) The rates of copper cooling tubing of suitable size with clamp up to 10 mtr is deemed to be included in the quoted rates. (2) The rates of AC bracket of each AC is deemed to be included in the quoted rates. (3) The rates for Gas charging is deemed to be included in the quoted rates.

M&L wiring for circuit/ sub main wiring of 2x6Sqmm + 1x6 Sqmm earth wire, alongwith eart wire PVC (FRLSH) insulated copper conductor, single core, 1100 v grade cable including in PVC casing caping/ PVC conduit complete all as directed by Engr -in- Charge.

Material & Labour for taking down existing LT cubical from existing location, transporting it to work shop, taking down old unserviceable starter & wiring from cubical, supply, install, testing & commissioning new Fully automatic star-Delta starter with Contactor 3RT1056 of 185 A rating-03 nos with auxilary NO & NC block -03 Nos, Bi-relay -3RU2156-5DB10-8K of range 110-160 Amp- 01 nos, Timer- 3RP15-01 nos, Switch disconnector fuse :3KL823 OF 160 A rating & HRC fuse- HRC DIN-3NA78360RC-160 A – 3 nos,Suitable Single phase preventer of Make : Siemens or equivalent in L&T /Legrand ) 415 volts with 50Hz, 3 phase suitable for 100 HP motors with set of Push button ON & OFF etc 02 Sets with MCCB TPN 160 Amp, 25 KA Cat No 420057 of Legrand -01 nos at incoming etc duly on new mounting or Making alteration to switchgear mountings as required ,Replacement of CT,PTs & voltmeter & Ammeter ,by making necessary alteration in panel cubical ,duly internal wiring with suitable size/cross section area copper conductor PVC insulated cable to carry current as per corresponding switch ger ratings and equivalent current rating copper lugs at incomer & outgoing side ,Making necessary alteration to the panel for incorporating all switchgears ,wiring & accessories etc, testing the panel at site after for satisfactory working of the plant complete all as directed by the Engineer-in-Charge.

Taking down chowkats or frames/ window frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each compete all as specified as directed by Engineer -in -charge

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc. 4 Sqm each compete all as specified as directed by Engineer -in -charge .

M & L for 20mm thick marble tiles machine cut in Jambs /dado laid over 10mmthick cement mortar 1:4 and jointed with grey cement slurry including cutting and polishin complete all as specified and as directed.

M & L for powder coated aluminium sliding window with anodized aluminium frame of 3 Track of size 92mmx32mmx 1.5mm thick, with sliding shutters(02 glass and 01 Wirecloth) with necessary channels (top rail, bottom rail and style of size 40mmx 18mm x1.10 mm thick) including glazing with tinted sheet glass panel 4.00mm thick and Aluminum alloy wirecloth 004mm nominal dia and avg width of aperture 1.4mm, fitted with necessary jointing cleats, glazing clips,locking device one for each shutter , rubber packing, aluminium beading, screws, rawl plugs including all necessary holes / drilling etc, complete all as specified as directed by Engineer -in -charge

S&F aluminium powder coated frame for louvers section of size 75x40x1.6mm including 4mm thick glass in louvors of 100 mm width with glazing cleat and revolving arrangement of standard section of aluminium including rubber packing, aluminium beading or gasket for for aluminium sections for fixing glass sheet and necessary fittings complete screws plugs, handle, tower bolt, stay hooks including fixed Aluminium wire cloth etc all as specified and directed by Engineer in Charge.

S & F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engr-in-Charge.

M&L for complete removal of old plastered surface and preparing the surface by cleaning it using wire brush, water jetting , mopping etc rendering in 12 mm thick Ready mix Plaster on brickwork or concrete surfaces including projected chajjas in patches etc having polymer modified ready to use plaster made from OPC-53 grade cement finished surfaces even and smooth complete all as specified and as directed by Engineer -in-Charge. Make:- Ultratech READIPLAST , ACC's ACCOPLAST, TRIMURTI Ready mix plaster or equivalent.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x125 mm double rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan

S&F 28-30 mm thick Prelaminated Flush WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded side with wood grain texture with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified

S&F 28-30 mm thick Prelaminated WPC factory made 100% Sketon/Glased door (conforming as per IS-4020) made from 100% lead free single extruded on both side with wood grain texture and with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified

S & F Factory made 100% solid wood plastic composite (WPC) flush type shutter/shelves of 18mm thickness one side laminated consisting of panel of PVC profile of 18mm ( =+-.07mm ) thick of density 600kg per Cum manufactured by ISO 9000 certified company. The thickness of shutter is edge painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete all as specified and as directed byEngr-in-Charge.

S&F 75 mm long stailess steel Butt hinges, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and as directed.

S& F 100mm Mild steel, semi-barrel tower bolt, open cover, with sheet pressed barrel, stove enamelled black with bright bolt and fixed complete all as specified and as directed.

S&F 100 mm long stailless steel handles designer type, fabricated type polished complete all as specified and as directed.

S&F 150 mm long stailless steel handles designer type, fabricated type polished complete all as specified and as directed.

M&L for 250mm long stainless steel sliding door bolt withsand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

S & F in repairs floor door stopper ( overall length of cover plate140 mm) of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in repairs in floors. complete all as specified and as directed by Engr-in- Charge .

Excavating in post holes (or similar holes) each n exc 0.5 cum getting out retuning filling in and ramming earth or broken rubber mixed with earth around in layer note exceeding 25 cm in soft/loose soil

M & L for cement concrete B2 1:2:4 (40mm grded stone aggregate) in fundation filling and mass conrete

M & L moorum/red bajri filling in floors or paving laid in lyers n exc 15 cm thic spred leveling and rammed including watering

M & L hardcore of gauge exc 63 mm but n exc 100 mm deposite spred and leveling in ;ayers n exc 15 cm thick watered and rolled/ rammed to a ture surface all as specified and directed

M & L for 75mm thick cement concrete type B0 (1:4:8) using 40 mm graded stone aggregate as in sub base of floor

M & L for 100mm thick cement concrete type B0 (1:2:4) using 20 mm graded stone aggregate as in sub base of floor

Supply & Fix Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick multirib TM profile of any colour having tensile of 550 Mpa yeald strenth as in roof cobering/cladding to wall fixed with self tapping screws of any approved pattern compltete all as specified and as directed.

S & F steel work in tubular trusses purlins rafter posts gusset plates cleats etc including special shap washers etc complete using ERW or inducton but welded tubes confirming to IS 116-1979 garde (medium garde)

M&L for preparation of old/ untreated plastered surfaces of walls/ceiling/chajja and applying two coats of weather proof exterior emulsion paint over and including a coat of priming coat of exterior cement base primer as per manufacturer's instruction complete all as specified and directed. Note : (i) The paining shall be done with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats of paint. (ii) Rate quoted shall be deemed to be included for scaffolding up to 15 mtr height building.

M&L for preparation of old/ untreated plastered surfaces of walls/ceiling and applying two coats of oil bound distemper over and including a coat of cement base primer of same manufacturer over and including sand papering 1mm thich wallcare putty in layesr as per manufacturer's instructions complete all as specified and directed. Note : (i) Painting shall be done using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper/ primer should be able to spray in hard to reach areas and penetration of distemper on the surface

Material and labour for preparation of old painted / untraeted steel surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S & F mild steel spring 250mm for door, ordinary rat tail rod pattern springs, including roller and roller plate including welding as required for steel frame compete all as specified as directed by Engineer -in -charge ( work shall be carried out in MD Qtrs/ OTM accns in different locations of Domestic/ Technical area as per site requirements upto 4 storieyed building)

Supply, installation, commissioning and testing of storage type electric water heater of capacity 25 Ltrs, AC ,240 Volt, 50 Hz, 5 star rating vertical/ Horizental type duly fixed to existingposition where directed including suitable mounting bolts, nuts and washer duly grouted including necessary accessories such as saftey valve, thermostste, NRV, inlet / out water connection piece etc incl writing MES No, on Geyser with white synthetic enamelled paint , all as specified and as directed by Engr-in-Charge. Make Havells Cat Pt No- Monza DX GHWAMGTWH025 or equvalent in Cropmpto/Usha /Jaguar

M & L for Point wiring with 2.5 Sqmm (nominal area) PVC( FRLSH) insulated sheathed copper stranded conductor cable run in and including on surface wall/Roof with PVC cassing and Capping of suitable size medium grade as per IS with all fittings such as bends, tee,junction boxes,etc of suitable size including 2.5 Sqmm PVC(FRLSH) insulated copper earth continuity conductor connected to common earth dolly and including PVC/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,regulators etc. Note:- (a). The Point wiring for geyser shall be independent from Main DB of indls qtr to geyser power Socket . the quoted rate shall be deemed to be inclued in the quoted rates.

Supplying and fixing Modular switch , one way, 16 amps, one Module of Make:- Ancher Roma/Legrand/ Crabetree.

Supplying and fixing Modular socket 16 amps-6 pin multipin, 2 Module of Make:- Ancher Roma/Legrand/ Crabetree.

Supply & Install ,testing & commissioning 16 meter motorised high mast shaft/pole in two section , Material construction of Hot rolled steel plate conform to IS 2062/BSEN 10025 or equivalent, Base Dia 360 mm Top Dia 150 mm, Plate thickness: Top - 150 mm, Bottom - 3 mm, Crossection of Mast: 20 side polygon, Standard of galvanisation: As per BS EN ISO 1461, Dia f basse plate: 520 mm, Thickness of base plate: 25 mm, Lighting protection finial: GI single spike, suitable for 50 m/sec wind speed as per IS: 875 (Part III), , with 6 nos of foundation bolt, PCD of foundation bolts: 445 mm , Foundation bolt of Type : TS 600 , diameter : 24 mm , Length : 850 mm, Luminairies Carriage details - Material of construction : 40 NB ERW Class B - MS pipe, Diameter of Carriage ring (mm): 450 mm, Construction : 8 Arm, welded 2 sections, Load carrying capacity: 16 Luminaries, Trailing Cable- Conductor: copper 5 core 2.5 sq mm, Insulation : PVC flexible, one cable per mast , Winch/ Power Tool- Type: Double drum SWL 350 KG, Method of operation: Integral Motor, Motor capacity: 1 HP, No of speed: 6 Pole single speed, Stainlesssteel Wire Rope- Grade / Construction: AISI 304, 7/19 construction, Two continous nos of rope, 5 mm diameter, Breaking load capacity of 1350 KgX 2. complete all as specified & directed by Engineer-In-Charge. Make: Bajaj /Phillips/Crompton Note: (I)Foundation work will be done as per drawing given by OEM. (II) BOQ item 1 include rate of High mast,High mast accesories, Anchor Plate 445 PCD 6 Hole, Template 445 PCD 6 Hole and these items must be supplied by OEM. (iii) Excavation of 2.2 M × 2.2 M× 2 M for High Mast will be paid seperatately

Supply & fix foundation bolts M24 X 580 mm straight, manufacturing from special steel along with nuts,washers,anchor, complete all as specified & directed by Engineer-In-Charge.

Supply & fix aviation lamp - Low intensity twin type aviation obstruction lamp-GLN 704, Make- Crompton, Model- GLN 704, Design- CONFORMING TO ‘ICAO’ ANNEX 14, TYPE -A, Lamp- SUPERBRIGHT RED LEDS - 300 NOS , PER LAMP, Input voltage- 230VAC ( +/-15%), Power consumption- < 18 WATTS @ 230 V AC, Light Intensity- > 10 CANDELA @ 360°, HORIZONTAL RADIATION PATTERN - 360°, VERTICAL RADIATION PATTERN - AVERAGE 10 CANDELA @ + 05° TO - 05°, NO. OF CIRCUITS - SIX ( SERIES / PARALLEL ), AVERAGE BURNING LIFE - 100000 HRS, PIV PROTECTION - UPTO 1 KV, IP rating- IP 65 AS PER IS – 13947 ( PART – 1 ) 1993, Body Material- CAST ALUMINIUM, Dome- RED TRANSPERENT POLYCARBONATE, Gasket- ENDLESS NEOPRENE, Finish- GOLDEN YELLOW POWDER COATED, 60 MICRON THICK, Termination- CONNECTING LIDS, UPTO 01 MTR, Mounting detail- 3/4" X 4" G.I. BARREL NIPPLE WITH 02 NOS G.I. CHUCKNUTS along with aviation stand, complete all as specified & directed by Engineer-In-Charge.

Material & labour for Providing & casting M-20 cement concrete foundation to be duly certified by MERI, suitable for 16 mtr raising lowering highmast considering the safe soil bearing capacity at site as 10T/sq.m at 3 meter depth and fixing provided nut ,bolts with help of template as per designed in approve manner, complete all as specified & directed by Engineer-In-Charge.

Supply & fix Flood light 250 W LED fixture of Make Bajaj cat part No FL 250 W 115547 Praze F300L WH NB A5 TGSDD, complete all as specified & directed by Engineer-In-Charge.

Returning, filling in including spreading, levelling watering and well ramming in layer not exce 25 cm, all as specified and directed

Suppy and fix in repair XLPE insulated ,armoured heavy duty electric cable with aluminium conductor 1100 volt grade ,cross sectional area 16 sq mm 4 core on wall surface with help of pressure plate ,Saddles etc, complete all as specified and as directed by Engineer-in-charge.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick,burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of the pl;ate not less than 1.5 Mtr below normal ground level,connected to galvanised iron strip 25x4 mm as earth lead by means of bolts,nuts ,washer and check nut of galvanized steel, protected by and including GI pipe 40 mm bore (light grade) and connected to High Mast /Electric Panel / LP test point as directed and including cement concret pit in 1:2:4 type B1 using 12.5mm graded aggregate, with cast iron miled steel frame embedded in the concrete enclouser fineshed flushed & CI cover 10 mm thick of size (300mmx300mm CI) having locking arrengment hinged to CI frame all as shown under electrical plate of SSR Part - I 2009 and as directed including painting the external surface of chamber & cover with enamel paint in diffrent colour as directed and writing earth results & date of test carried out with white paint on black painted background, wiremesh funnel 20 mm bore GI pipe medium grade for watering adequate quantity of charcol and common salt in alternate layer of 15cm 3ft x 3ft thick all around the electrode including necessery excavation & earth work in any type of soil complete testing on completion , complete all as specified & as directed by Engneer-in Charge. Note:- i) Filling the pit with black cotten soil brought at site.

Supply, Installation, Testing and commissioning LED street light fittings 25 watt with minimum110 lumen/ watt system lumen output .The luminaire should have cool white coloure temperature with minimum 5700 K. The luminaire housing should be made of pressure die cast aluminium Epoxy power coated with wether proof gasket for LEDs and control gear compartments, heat resistance toughened clear glass fixed with SS screw with IP 66 protection, Make Crompton CAT No TRP-415-25-57-SL-LM-NBK with 2 years of warranty or equivalent in Havells/Phillips. complete all as specified and directed by Engineer- in-charge.

Supply and fix MS single arm bracket 1.5 mtr long 40mm dia bore including all fitting for cable protection etc laid in floor or fixed to poles / wall with clamps etc all as specified and directed.

Material & Labour for taking down existing LT cubical from existing location ,transporting it to work shop ,taking down old unserviceable starter & wiring from cubical , supply, install ,testing & commissioning new Fully automatic star-Delta starter, Contactor- 3RT1054 of 115 A rating -03 nos) with auxiliary NO & NC block -03 Nos+ Bi-relay-3RU2156-5CB10-8K (90-125 Amp) -01 nos, Switch disconnector fuse : 3KL821 of 100 A rating & HRC fuse- HRC DIN-3NA78300RC of 125 A rating – 3 nos, Suitable Single phase preventer of Make :Siemens or equivalent in L&T /Legrand ) 415 volts with 50Hz, 3 phase suitable for 75 HP motors with set of Push button ON & OFF etc 02 Sets with MCCB TPN 125 Amp, 25 KA Cat No 420056 of Legrand -01 nos at incoming etc duly on new mounting or Making alteration to switchgear mountings as required ,Replacement of CT,PTs & voltmeter & Ammeter ,by making necessary alteration in panel cubical ,duly internal wiring with suitable size/cross section area copper conductor PVC insulated cable to carry current as per corresponding switch ger ratings and equivalent current rating copper lugs at incomer & outgoing side ,Making necessary alteration to the panel for incorporating all switchgears ,wiring & accessories etc, testing the panel at site after for satisfactory working of the plant complete all as directed by the Engineer-in-Charge.

Suppy and fix in repair XLPE insulated ,armoured heavy duty electric cable with aluminium conductor 1100 volt grade ,cross sectional area 10 sq mm 4 core on wall surface with help of pressure plate ,Saddles etc, complete all as specified and as directed by Engineer-in-charge.

Supply & fix cable joint termination box PVC body housing suitable for housing and including 100 amps rated, 3 phase, 4 wire system mounted on PVC insulators for one incomming and two out going cable entry space mounted on street light PCC/ tublar pole or mounting on wall with 25x3 mm FI clamps with nut, bolts and washers and including one 6 amps MCB, SP, 240 volt for street light supply complete all as as directed by Engr-in-charge.

M&L wiring for circuit/ sub main wiring of 2x1.5 Sqmm + 1x1.5 Sqmm earth wire, alongwith earth wire PVC (FRLSH) insulated copper conductor, single core, 1100 v grade cable in including PVC casing caping/ PVC conduit complete all as directed by Engr -in- Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Material & Labour for providing and fixing stainless steel (Grade 304)Tapering/equal post made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing/pole with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab/pedestal with suitable arrangement including SS double pulley system for two flags complete all as specified and as directed by Engineer-in-Charge. Note : minimum outer dia of pipe of 6-7m height shall be 75mm, and 90mm dia for height 8-10m.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-in-Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite

M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in 1:6 CM complete all as specified and as directed by Engineer-in-Charge

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in 1:4 CM complete all as specified and as directed by Engineer-in-Charge

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in 1:4 cm complete all as specified and as directed by Engineer-in-Charge

S&F of MS Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

S&F for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment

M&L for 25mm Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base of floor complete all as specified and as directed by Engr-in- Charge.

M&L for matte fully body Vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

Preparation of new painted surfaces of steel and iron of any description, over 10 cm in width or girth, not otherwise described include for all necessary preparatory work required and applying two coat of synthetic enamel paint over a coat of zinc chromate primer complete all as specified and directed by Engineer in charge.

SHREE SAMARTH SERVICES (BID ID -3407706)