Karnataka

AOC

Works

Other Works

Replacement of Existing 2CT, 2PHT HT Metering cubicle by 3CT, 3PT HT Metering Cubicle due to installing SRTPV and existing 3 way LBS by 3 way non das RMU in Abhaya Complex. KSDB, Bangalore

Karnataka Slum Development Board

KSDB Bengaluru Division No ONE | Bangalore, Karnataka

Amount: ₹11.8 LCloses: 10 Apr 2026Closed

Timeline

Published1 Apr 2026
Closed10 Apr 2026
Awarded—

Bids

1 Bid10 Apr 2026

#	Company	Amount	Status
1	SRI HANUMAN CIVIL WORKS AND ELECTRICALS ₹11.7 Laccepted-aoc	₹11.7 L	accepted-aoc

Tender Value

₹11.8 L

EMD Value

₹29,447

Closing Date

10 Apr 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Karnataka Slum Development Board

Contact Person

JAWAHAR JOGI C P

Office Number

Work Description

Replacement of Existing 2CT, 2PHT HT Metering cubicle by 3CT, 3PT HT Metering Cubicle due to installing SRTPV and existing 3 way LBS by 3 way non das RMU in Abhaya Complex. KSDB, Bangalore

Tender Information

Tender ID

KSDB/2025-26/OW/WORK_INDENT447

Reference Number

KSDB/2025-26/OW/WORK_INDENT447

Tender Type

Open

Product Category

Other Works

Form of Contract

Two Tender Document System(Two Cover)

Location

KSDB Bengaluru Division No ONE

Source Website

Subscribe to view

Documents Required

15 documents required · 15 mandatory

Technical Bid

RequiredCLASS 1 ELECTRICAL PWD LICENSE COPY

RequiredGST REGISTRATION COPY

RequiredPAN CARD SCAN COPY

RequiredANNUAL TURNOVER CERTIFICATE

RequiredINCOME TAX FILING DETAILS

RequiredBALANCE SHEETS- LAST FIVE YEARS

Requiredprofit & loss statement of last five years

RequiredLINE OF CREDIT

RequiredSIMILAR NATURE WORK DONE CERTIFICATE

RequiredLIST OF EXISTING COMMITMENTS AND ONGOING WORKS

RequiredBID CAPACITY CALCULATION SHEET

RequiredAGENCY/CONTRACTOR/FIRM PROFILE-ADDRESS

RequiredDIFFERENCE AMOUNT DD SCAN COPY

RequiredSITE VISIT LETTER FROM AEE

RequiredOTHER DOCUMENT AS PER BID DOCUMENT

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPP-PORTAL due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Conditioned tenders will not be accepted.

The GST, Royalty, Income Tax & Other concerned Taxes will be deducted in works bills as per prevailing government order.

The Tenderer shall obtain the work done certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer and scan the Original Certificate and attach the scanned file to the Bid. The Original Certificate/Certificates shall be produced at the time of opening of technical Bids for physical verification.

The Employer reserves the all rights to accept/ Reject any or/all Tenders and to cancel the tender process at any stage prior to award of the contract without assigning any reason.

The Department is not responsible for any delay in accessing KPP-PORTAL.

1%of bill amount of the successful tenderer will be deducted towards construction worker welfare fund.

The tenderer should maintain the work during defective liability period of one year.

All materials required for the work, shall be procured by the tenderer themselves and should be got tested by the quality control from the approved authorities at his own cost before use on work.

To qualify for award of this contract, each tenderer should furnish qualification information as per section 3 of standard tender document attached to this tender. And satisfactory completion as a prime contractor for at least one single similar nature work to an extent of 50% of the cost of the work. (Scanned copy of the Work done Certificate issued by competent Authority, not below the ranking Executive Engineer should be uploaded.)

The item rates quoted shall include cost of royalty charges on construction materials and other taxes as per the rates provided in prevailing cost and conveyance of all materials, curing, watering loading and unloading with all leads &lifts, labor, hire charges of machinery equipments (Except GST). Etc. Complete including incidental charges. All the items shall be executed as per the direction of the engineer in charge of the work.

Statement indicating (A) the total value of the Electrical engineering works executed and payment received in last 5 years (Certified by the charted accountant to be scanned and uploaded) (B) Work performed as a prime contractor on works of similar nature during the last 5 years (Scanned copy of the work done certificate issued be Competent Authority of rank not less than Executive Engineer should be uploaded) necessary details shall be uploaded as per the respective formats furnished along with the qualification information.

To qualify for award of this contract, the Financial turn over for each tenderer in its name should have in the last Five years i.e. 2020-21 2021-22,2022-2023 ,2023-2024 & 2024-25 achieved in at least two financial years an average financial turn over (In all clause of Electrical Engineering Construction work) of Please Refer KPP-PORTAL(not less than 2 times of cost under this contract) submit the scanned copy of the profit & loss statement indicating the contract receipts certified by the chartered account. Upload Turnover certificate which showing the 5 years turnover and should certified by the chartered account with UDIN Number also.

Liquid assets and or availability of credit facilities of not less than (Credit lines/ Letters of Credit/ Certificates from Banks) for meeting the fund requirement etc., (usually 30% of the amount put to tender) for all works.

The contractor should have a valid Electrical license to execute works in PWD Department and also submit GST registration copy which shall be valid till this tender opening date. The all above copies of attested certificates should be attached in KPP-PORTAL.

Tenders from contractors who have not completed the works in time in any department, and/or having litigation history or financial failures.etc. Will not be considered.

The Executive Engineer, No.1 Division, KSDB Bangalore has rights to accept or reject any of tenders without giving any reasons.

The details and other information will be made available in Executive Engineer, No.1 Division KSDB, Bangalore office which can be collected during office hours. And also can see in the tender document.

The DD/PO for Tender difference amount should also be scanned and uploaded to KPP-PORTAL platform before final date and time of closing to upload the details.

If the Contractor/Agency intended to quote less than the estimated cost the contractor shall put a DD for the tender difference amount quoted drawn in favor of KSDB A/C Executive Engineer, No.1 Division, KSDB, Bangalore payable at Bangalore from nationalized/scheduled bank. The scan copy of Tender Difference Amount DD only Should be uploaded in e-portal and The Tender Difference Amount DD Should be produced in a date as specified in calendar of events at the office of the undersigned to Account Superintendent. If the contractor fails to produce the Tender Difference Amount in his tender will be disqualified and EMD will be forfeited. The DD for difference amount shall not be accepted after completion of the specified time schedule. This difference amount will be returned after satisfactory completion of work.

Rates in BOQ which are except GST & GST will pay to the tendered amount separately.

In view of achieving targets as per the government norms, only three works per agency for this notification will be considered for the entrustment.

Agencies who have not completed Previous works, within the stipulated time, since Three years in any of the Divisions of KSDB will liable to be rejected.

Technical Criteria

General

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)

Past Experience

Satisfactorily completed, as prime contractor, at least one similar nature work of value not less than 50% of amount put to tender i.e.Rs.5.88 Lakhs.

Work Done Certificate

Capabilities of Vendor

class 1 Electrical pwd license copy

PWD Registration Certificate (Class I/II/III/IV)

Financial Status

Achieved in at least two financial years an average financial turnover (in all classes of electrical engineering works only) of Rs.23.55 Lakhs.

Audited CA Certificate of Annual Turnover

Line of Credit

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹29,447

Important Dates

Last Activity

10 Apr 2026

Published

1 Apr 2026

Bid Opening

15 Apr 2026

Download Ends

8 Apr 2026

Pre-Bid Meeting

8 Apr 2026

BOQ Preview

•

Replacement of Existing 2CT, 2PHT HT Metering cubicle by 3CT, 3PT HT Metering Cubicle due to installing SRTPV and existing 3 way LBS by 3 way non das RMU in Abhaya Complex. KSDB, Bangalore

•

Rod type of earthing using 40 mm dia, 3 mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300mm depth and using 50x6mm flat welded to ground rod as terminal & connected to equipment gro...

•

11kV, 3 Core, XLPE HTUG Cable (ROUND Armoured)-95 Sqmm

•

Heat Shrinkable indoor type cable termination kit for. XLPE cable 3X95 sqmm

•

Compact RMUs (VCB/SF6 Type) with Al Busbar RMU (3 way); One In comer + One Breaker +one out going (2OD + 1 VL); 350 MVA, 650A

•

Measuring Equipments - HT ETV Meter 0.2 Accuracy Class with ABT feature and DLMS protocal with ToD with RS 232 Port UNIDIRACTIONAL

•

Heat Shrinkable Straight through jointing kits for XLPE cable with Copper lugs & Al ferrules 3X95 Sq.mm

•

Digging of pit for providing GI Pipe type earting in Ordinary soil

•

11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Meters for 3 Phase 4 Wire Metering...

•

Erection of HT metering Cubicle on Platform.

•

Making and Fixing of Heat shrinkable type pot head HT Cable of size 3x95 to 3x150 Sqmm

•

Heat shrinkable Straight Through Joint for HT Cable 3x95 to 3x150 Sqmm

•

Fixing foundation frame of channels and angle iron welding fixing in concrete aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel initial filling of oil etc....

•

Supplying & Fixing Chemical earthling for grounding. Conduits, IC cut-outs & other equipments backfill compound which is non- corrosive, thermally conductive, potenti...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 6 mm GI strip

•

Supply and fixing of fully Enclosed Automatic Transfer Switch (ATS) Pre-wired with Flexible Settings and seamless transfer between two power sources. The enclosure made of MS Pow...

•

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. P...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

1kw-IFT 20.docx

Tender Document • 0.32 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

SRI HANUMAN CIVIL WORKS AND ELECTRICALS

₹11.7 Laccepted-aoc