Reconstruction Of Vegetable Shops Market at Subramaniyapuram In Ward No 77

Amount

Dismantling the Brick works etc., carefully away from the site

Charges for Putting borehole of size 23 / 30 cm dia for file foundation in Sandy and Other loose soil by using hand Boxing set Rate Shall be include the cost of Labour for Boxing Fule Charges for Auger Bore and Other T & P Employed etc., complete

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

Supplying and filling in foundation and basement with filling Quarry Dust in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Supplying, erecting STEEL CENTERING for sides and soffits inc supports and strutting for plain surface such an reinforced cement concrete slasp rectangualar beams tee or el beams lintels , bed blocks staircase in all floors of any height (the retrived materials should be taken back by the contractor) the payment for cenetering shall be given by the concrete is laid ( RCC column footing plinth, beam and lintel sides )

Supplying, erecting STEEL CENTERING for sides and soffits inc supports and strutting for plain surface such an reinforced cement concrete slasp rectangualar beams tee or el beams lintels , bed blocks staircase in all floors of any height (the retrived materials should be taken back by the contractor) the payment for cenetering shall be given by the concrete is laid (bottom only)

Reinforced Cement concrete 1:1.5 :3 (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete. For Basment Floor

Reinforced Cement concrete 1:1.5 :3 (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete. For Ground Floor

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Brick work in CM 1:5 (one cement & five sand) using III class country bricks of size 83/4"X41/4"X 21/4" including finishing, curing, etc., complete complying with standard specification - 100CFT For Basement Floor

Brick work in CM 1:5 (one cement & five sand) using III class country bricks of size 83/4"X41/4"X 21/4" including finishing, curing, etc., complete complying with standard specification - 100CFT For Ground Floor

Plastering with cement mortar 1:3, 10 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Supplying and erecting pull and push type rollingshutter with I.S.I. make of approved size and section using 18 gauge G.I. sheet with manually operated type.The Shutter shall be painted with one coat of red oxide primer and clear opening 1.8 M width 2.6 m height therate is inclusive of hood covers,transportation charges etc,complete as per standard specification.

Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Providing Geological survey to fix the borewell point

Drilling 150mm dia borewell in all kinds of soils expect hood rock by first taking pilot bore and than enlarged to the required dia to enable to inserting the P.V.C. Casing pipe by directed rotary mud and circulation method including all labour and Water etc..

Supply of 150mm dia P.V.C. Casing pipe

Labour charges for inserting 150mm PVC casing pipes assembly (with slot or without slots) in the drilled bore including jointing the pipes etc complete.

Drilling of borewell anywhere in-Tamilnadu including transportation from one place toanothar place within Tamilnadu in alluvaial soil or sedimentary strata of clay and sand or sand, stone, shale, pebbles, boulders etc., by first taking a pilot bore of 140/150mm dia and then enlarging to requierd dia by direct or reverse rotatry mud and circulation methd using contractor's rig, fuel, labour, drilling, at the site shown by the Deparment Officers including construction of mud pit.

Developing the borewell with air compressor of 300 cfm capacity (min 8 hours) including transportation labour and fuel charges for compressor as directed by corporation yield test by ''V'' notch method.

THREE PHASE SUBMERSIBLE PUMPSET SUITABLE FOR 150MM DIA-3HP BOREWELL AS PER IS 8034/2002 WITHOUT PANEL BOARD Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor asper IS 9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/-10%, 50HZ +/- 5 % , 50 lpm x 100mtr

THREE PHASE PANEL BOARD- D.O.L. WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of direct online starter confirming to S13947 and IEC 947 suitable KW rating for operation in AC/single Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).

Supply and delivery of PVC insulated and sheathed 4.0sqmm copper cable conforming to IS 694/1990 suitable for submersible pump set.

Supply and delivery of MS Kisok of size 0.75m x 0.45mx0.75m made up of MS angles of size 50mm x 50mm x 4mm alround covered with 16gauge MS sheet and kiosk door made up of MS plates of size 15mm x 3mm including cutting, welding, grinding locking arrangements, labour charges etc., complete

Supply of PVC pipe and G.I pipes and PVC pipe & Specials. 40mm UPVC Pipe

Nylon Rope (PWD Data 21 - 22)

32mm GM gate Valve

32mm GM non return Valve

32mm GI Elbow

25mm PVC Pipe (PWD Data 21 - 22)

25mm PVC Coupling (PWD Data 21 - 22)

25mm PVC Tee (PWD Data 21 - 22)

25mm PVC Elbow (PWD Data 21 - 22)

20mm Tap

40mm Clamp set

150mm borewell cover

Labour charges for erection of submersible pump set bore well including fixing and jointing submersible cable with proper clamps pressure gauge up to the exterior wall of pupm room kisok and erection of panel board consisting of TPCIN switches starter volt meter ammeter three indicator tamp capacitor single phase preventor ater level guard laying and jointing if cables and earthing complete the pumpset on trial for 3 days..

Supply and delivery of 2000 lit capacity and fixing of HDPE tank as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,complete as per standard specification.

Supply and fixng of TNEB meter board suitable for 3 phase 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 200A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete SD 131

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan Point (For electronic regulator) (5 Points Per Coil) SD -20

Supply and fixing of single box type (philips / Havells / Eq) suitable for 4 feet 20W LED tube light with TW round blocks on wall or ceiling with 20W LED tube light with PVC unsheathed Copper leads from terminals to the fitting

Supply and fixing of 48W LED Street Light Fitting LED OUTDOOR FITTINGS (LIGHT EMITTING DIODE) Higher End Philips / Havells / Equivalent etc., complete

White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. - 100sq.m S.I.333

Painting New wall surface with Two coat of Plastic Emulsion paint of approved quality including cleaning of plaster surface with soap soda and water by manual labour.

Painting with Ready Mixed Enamel Paint over the new Iron works of approved quality and colour with priming coat including the cost all materials etc., complete, in all floors.

Fabrication supply and fixing of steel window made of 40x40x6mm MS angle for outer frame and shutter made out of 35x35x6mm MS angle with necessary stiffness 32x6mm and flats at 30cm interval and necessary cross diagonal MS flats. The shutter frame should be fully covered by 18G GR sheet and provided with required locking arrangements and one coat of red oxide paint and primer etc…

Providing Rain water harvesting arrangements in corporation building by inserting of 150 mm pvc slotted casing pipe,including earth work excavation for 900mm precost cement ring 5nos filling with one,three ,fifth rings are 40mm metal and two and fourth rings are sand providing necessary pipe line arrangements std specification etc.complete.,

Fabrication supply and fixing of fully paneled double leaf steel door made of 40x40x6mm MS angle for outer frame and shutter made out of 35x35x6mm MS angle with necessary stiffness 32x6mm and flats at 30cm interval and necessary cross diagonal MS flats. The shutter frame should be fully covered by 18G GR sheet and provided with required locking arrangements and one coat of red oxide paint and primer etc… TWAD-

Add GST 18%

C SIVAKUMAR