CERTAIN REPAIR TO OFFRS MD ACCN IN THE AREA OF AGE BR-I UNDER GARRISON ENGINEER AMRITSAR CANTT.

Amount

Dismantling Brick tiles or terracing tiles, single layer on roofs ; Complete all as specified and as directed by Engineer-in-Charge.

Demolition mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) ; Complete all as specified and as directed by Engineer-in-Charge.

Demolition of Concrete of any description and in any position not otherwise specifically provided ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in padding concrete fair finish, roof kerbs or mud stops, rounded or chamfered on edges and like including weathering slight rounded and throating ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over entire roof area with over lapping 100mm to either sides and sealed in after cleaning down the roof by brooms ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for 40mm thick brick tiles, laid on and including 15 mm thick cement mortar 1:6 and joints grouted and pointed flush in CM 1:3 mixed with 5% crude oil by weight of cement ; Complete all as specified and as directed by Engineer-in-Charge.

All as per Srl Item No. 07 here-in-before but except brick tiles. Note:-Old serviceable tiles shall be reused.

Raking out joints/ pointing to brick work or brick tiles, laid flat, in floors, surface channels, roofs, etc built in cement mortar ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for flush pointing to bricks laid flat or brick tiles in pavings in CM 1:3 with waterproofing compound. Note:- WPC shall be measured and paid separately

Supply only liquid waterproofing compound ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for cleaning of dust & dirt , Removal of all loose existing bituminous material or with chipper & applying heat torch gun to get smooth plain finished surface. repairs all joints & cracks with Highly Elastic bituminous Cold applied Putty-Tarplast- having penetration after setting upto 8mm & confirming to IS 1580:1991. Any annular space between drain pipe and concrete should be filled with mortar admixed with ShaliSBR latex of STP Ltd. Making necessary Gola 75x75 mm with rich cement mortar admixed with ShaliSBR latex of STP Ltd at the interface of horizontal & Vertical junctions ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for Slightly damp the surface, avoid standing Water. Prime the surface with Tarfelt LM mixed with potable water in the ratio 1:1 and apply @ 400gm/sqm (as per surface condition). Allow the primer to touch dry in tacky position in open atmosphere. Thenafter apply 1st coat of Tarfelt LM (Liiquid membrane) having elongation 200% confirming to ASTM-C-412 & bridging of 8mm confirming to ASTM-C-836 with tensile strength after 7 days 0.5mm confirmin to ASTM-C-412 with no diluation of water on primed surface is still tacky with consumption of 0.7 kg/sqm. lay Geotex of 45 GSM/Fibre mesh simultaneously and paste it properly with overlap of 50mm. Allow the first coat to dry for 10-12Hrs. Apply 2nd coat of cured first coat with consumption @ 0.7kg/sqm in opposite dierction of first coat by Brush or roller. Sprinkle sand @ 200Gm P/Sqm while the coating is stick to facilitate plastering for protection screed. Allow it to dry for 10-12 hrs . Apply 3rd coat if required as per site reqirement ; Complete all as specified and as directed by Engineer-in-Charge.

Demolition of Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for brick with sub class B brick buildt in cement mortar 1:6 ; Complete all as specified and as directed by Engineer-in-Charge.

All as per Srl item No. 15 but except bricks ; Complete all as specified and as directed by Engineer-in-Charge.

Taking down cement or cement lime plaster on brick walls etc including raking out joints, hacking for key, scrubbing down with water ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surface and finished even and smooth without using extra cement and applying two coats of oil bound distemper over and incl one coat of alkali resistant priming paint on newly plastered surfaces of wall ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface and finished even and smooth without using extra cement and applying two coats of cement base paint over a coat of cement primer on newly plastered surfaces of wall ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3. finishing even and smooth without using extra cement and apply three coats of white wash on ceiling including preparation of new plaster surfaces ; Complete all as specified and as directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for glazed ceramic coloured wall tiles 450x300x6 to 7mm thick on vertical surfaces such as skirting and dados etc shade as approved by Engr-in-Charge set and jointed in neat cement slurry and pointed in coloured cement to match over & including 10mm thick rendering in CM 1:4 ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for Non skid ceramic coloured tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc shade as approved by Engr-in-Charge set and jounted in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for Vitrified tiles,light shade 10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors/wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6/plaster in CM 1:3 ; Complete all as specified and as directed by Engineer-in-Charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for Machine cut Kota stone slab flooring 20-25 mm thick (size not less than 0.5 sqm each) over cement screed base of 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing ; Complete all as specified and as directed by Engineer-in-Charge.

All as per srl Item No 26 here-in-before but as skirting/dado over rendering 10mm thick in CM 1:4 ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for Granite (of any type) work (table rubbed and polished) 20mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 ; Complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for 50mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring Finishing fair and even. ; Complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhat with shuttering (without taking off shutters from frame including grill & guard bars) size of shutter not exceeding 1.5 sqm each ; Complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhat with shutters without taking off shutters from frame size of shutters exc. 1.5 but not exceed 4 Sqm each ; Complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description size of shutter not exc 1 sqm each. ; Complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description size of shutter exc 1 sqm but n.exc 2 sqm. ; Complete all as specified and as directed by Engineer-in-Charge.

Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete and refixing in the same opening all as specified and directed after easing and adjustment ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for fixed in repairs 18/19mm thick Prelaminated HDHMR board, interior grade, with decorative choice lamination, fixed with screws as in shelves/Shutters ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing Continuous (piano) hinges, Width of flaps (when open) in 40 mm mild steel, bright finish or electrogalvanised ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing 30mm thick Glazed and skeleton window shutters , open rebated and prepared to receive glass, gauze, etc. divided in to quares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b) ; supplied and fitted to chowkhats ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing Anodised aluminium grill of approved design/pattern, with approved standered section and fixed to the window frame with CP brass/SS screw@ 200mm c/c, including cutting the grill to proper opening size for fixing and opration of handle and fixing approved anodised aluminium section around the opening all complete as per requirement and direction of Engineer-in-charge.

Supply and Fixing powder coated Anodised aluminium sliding window shutters or side hung type, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as roller, locking arrengment, peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as required at site all as directed by Engr-in-charge. Note: Glass and wire mesh shall be measured and paid separately.

Supply and Fixing powder coated Anodised aluminium frame for doors, Sliding windows, ventilators with one or more rebates including joining cleat for fixing etc. ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing pressed steel frame for doors with one or two rebates size of frame 125x60 mm including necessary fixing lungs hinges lock strike plate etc ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing factory made 35 mm thick flush shutters solid core construction with block board core and plywood face panels ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloure PVC sheet reinforced with M S square tube, suppling & fixing in opening as per specifiaction & drawing ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing Factory made solid panel PVC door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing Aluminium handles 150mm long, cast type anodised ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing Aluminium anodised barrel tower bolt 150mm long ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing Floor door stoper of aluminium alloy body with hard drawn steel spring 140mm long ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing 300mm long aluminum alloy anodized sliding door bolt with hasp and staple(bolt type)and fixing clips of sheet cast or ectruded sec and fixing bolts and sliding bolts of extruded sec or cast aluminum alloy and fixed ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing butt hinges medium weight cold rolled stainless steel complete size 100mm ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing MS 300mm long ordinary Helical mild steel stove enameled black door springs including rollers and roller plate ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing 100mm long Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples ; Complete all as specified and as directed by Engineer-in-Charge.

Hacking out old brocken glass ( any thickness , size , quality or description ) from wooden/metal frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing 3mm thick Sheet glass, ordinary quality and glazing with oil putty/wooden beading in square n exc 0.5 sq.m. in each pane ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing 3mm thick figured glass pin head type, ordinary quality and glazing with oil putty/wooden beading in square n exc 0.5 sq.m. in each pane ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing 4mm thick Sheet glass, ordinary quality and glazing with oil putty/wooden beading in square exc 0.5 sq.m. in each pane ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for preparation of undecorated wooden surfaces of any description , not otherwise described , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described above priming coat of red oxide including prepration of previously untreated surfaces ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing stainless steel rolling drawer pull type suitable for kitchen cabinets with all fixing arrangement area of each drawer n exc 0.30 sqm of vertical face having depth 450mm to 600mm complete all as specified.Note:- Net area of front finished surface will be measured ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing 75 to 80mm long brass handle ; Complete all as specified and as directed by Engineer-in-Charge.

Dismantling structural steel work including doors, gates but excluding framed truss etc ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing framed work as door, chowkhats, and Grill gates of angle frame work fixed with Nut & bolt to wall or other section complete drilling or fixing welding be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also festering and fixing ; Complete all as specified and as directed by Engineer-in-Charge.

Supply & Fixing rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore including taking down old water tank.

Supply & Fixing rotational moulded polythene water storage tanks of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore including taking down old water tank ; Complete all as specified and as directed by Engineer-in-Charge.

Disconnecting existing tanks 1000ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc ; Complete all as specified and as directed by Engineer-in-Charge.

Disconnecting existing tanks 500ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc ; Complete all as specified and as directed by Engineer-in-Charge.

Taking up or down 15mm bore steel tubing and connections , including cleaning for re-fixing or removal of store ; Complete all as specified and as directed by Engineer-in-Charge.

Taking up or down 20mm bore steel tubing and connections , including cleaning for re-fixing or removal of store ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors ; Complete all as specified and as directed by Engineer-in-Charge.

Refixing 15mm old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.). Note:- old serviceable GI tubing obtained from Srl item No 68 will be reused after necessary cleaning and with all new fittings.

Refixing 20mm old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.). Note:- old serviceable GI tubing obtained from Srl item No 69 will be reused after necessary cleaning and with all new fittings.

Taking down eaves gutters and rain water pipes ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings and accessories

Supply and Fixing 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed by Engineer-in-charge

Supply and Fixing 75mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed by Engineer-in-charge

Supply and Fixing 110mm bore PVC (SWR) bends any radius ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing 110mm PVC (SWR) junction single, (Single T) equal or unequal ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing 75mm bore PVC (SWR) bends any radius ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs vitreous china wash down water closet pan pedestal pattern white including fixing bolts incl white seat cover with flat bottom and cover and mild steel chromium plated hinging device (excluding flushing cistern and flush pipe). ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs vitreous china squatting pan of Orissa pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including making good the dismantled portion to match with existing surface of floor all as specified and directed. ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs 10 ltrs capacity PVC valveless syphonic action flushing cistern low level with inlet ball valve, flush pipe of polythelene of low or high density or PVC 32mm dia ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs plastic water closet seat cover white with flat bottom and cover and mild steel chromium plated hinging device ; ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Chromium plated Health faucet in repairs with 1.5 metre long chain. ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs flushing jet including pipe for Europian type closet including fixing to 15m dia pipe suitable length with brass check nut ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing toilet paper holder of brass chroumium plated with CP cover ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs vitreous china wash hand basin white with flat back type size 550x400mm excluding taps chain and plug and porcelain stopper but including brackets CP waste coupling 32mm and PVC waste pipe 32mm dia including cutting for and pinning ends of brackerts ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs Brass Chromium plated Tubular towel rail, 20 mm dia. D type, 60 cm long between flanges ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs glass shelve assembly 60cm in oval shape consisting 5.5mm to 8mm thick glass including CP guard railing with double rail ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs pillar taps 15mm dia cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes. ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs PVC waste pipe32mm dia suitable for WHB/Sink ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing glass corner of 30cm radius made of 5.5mm thick sheet galss with CP guard rails fixed to walls with brackets ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing brass chromium plated soap dish fixed with screws to walls ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs CP shower rose fancy type with CP arm ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs stop valves brass chromium pltaed 15mm dia with long shank and cup concealed type. ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs centre hole wall mixer cast coppre alloy chromium plated with capston head srewed down high pressure with lettered hot or cold with long screwed shanks fly nut screwed for iron pipe 15mm dia ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repairs chromium plated stop valve /Angle valve15mm bore fancy type screwed down for high pressure ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs PVC connection pipe 15mm dia 600mm long with brass check nut at both ends ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs CP bib tap 15mm dia long body screw high pressure for iron pipe ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs CP bib tap 15mm dia fancy type with crutch or butterfly handles,screwed down, screwed for iron pipe or for brass ferrule high pressure ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing 100mm dia CP grating with or without hinge type or hole type ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs 25mm dia stainless steel Curtain rods/ rails with Brass brackets, stops, rollers, finials, 1 pair of Brass decorative knobs for each curtain rod etc ; Complete all as specified and as directed by Engineer-in-Charge.

Sai Construction Co.

GEE EMM ASSOCIATES