REPAIR / REPLACEMENT OF INTERNAL ELECTRIFICATION MCB DBs WIRING AND CONNECTED ITEMS IN HQ K K SUB AREA, RSI BANGALORE, OFFICER MESS SUB AREA, LIASSON CELL, STN HQ BANGALORE, SIGNAL COY, ASC SUPPLY DEPOT, HOSP RD, OLD MH LINES, AM LINES, FMCC, ZRO BA

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing unserviceable materials and making good disturbed surfaces of walls, floors etc.

M & L for point wiring with 1100 Volts grade 1.5 sqmm PVC insulated FRLSH unsheated cable with multistandred copper conductor conforming to IS: 694:1990 (for phase, Neutral and and Earth) in and including Non metalic PVC rigid condiut medium grade with ISI mark with all accessories concealed in wall/ ceiling/floor / road etc, with cast iron / pressed steel terminal box of sutaible size duly painted inner & outside by anticorrosive paint, including plastic laminated sheet 1.6 mm thick for mounting switches, socket cover with fitting screw washer, including cutting chasses in wall/floor/roof for fixing of conduit and making good the distributed surfaces matching with existing complete all as specified and as directed for following- One light/ fan/bell/5Amp socket outlet point controlled by one switch

One switch / 5 Amp socket outlet point as same board with other switches complete all as specified and directed by Engr-In-Charge

One switch / 5 Amp socket outlet point independent but near switch board an same vertical /Horizontal plane complete all as specified and directed by Engr-In-Charge

One light point controlled by two way switch complete all as specified and directed by Engr-In-Charge

All as per Item no 2 above here in before but with 2.5 sqmm size wire for power point complete all as specified and directed by Engr-In-Charge

M & L for point wiring with 1100 Volts grade 1.5 sqmm PVC insulated FRLSH unsheated cable with multistandred copper conductor conforming to IS: 694:1990 (for phase, Neutral and and Earth) in Existing condiut all accessories concealed in wall/ ceiling/floor / road etc, with cast iron / pressed steel terminal box of sutaible size duly painted inner & outside by anticorrosive paint, including plastic laminated sheet 1.6 mm thick for mounting switches, socket cover with fitting screw washer, including cutting chasses in wall/floor/roof for fixing of conduit and making good the distributed surfaces matching with existing complete all as specified and as directed by Engr-In-Charge.

M & L for point wiring with 1100 Volts grade 2.5 sqmm PVC insulated FRLSH unsheated cable with multistandred copper conductor conforming to IS: 694:1990 (for phase, Neutral and and Earth) in and including Existing condiut all accessories concealed in wall/ ceiling/floor / road etc, with cast iron / pressed steel terminal box of sutaible size duly painted inner & outside by anticorrosive paint, including plastic laminated sheet 1.6 mm thick for mounting switches, socket cover with fitting screw washer, including cutting chasses in wall/floor/roof for fixing of conduit and making good the distributed surfaces matching with existing complete all as specified and as directed by Engr-In-Charge.

M & L for point wiring with 1100 Volts grade 1.5 sqmm PVC insulated FRLSH unsheated cable with multistandred copper conductor conforming to IS: 694:1990 (for phase, Neutral and and Earth) in casing caping all accessories, with cast iron / pressed steel terminal box of sutaible size duly painted inner & outside by anticorrosive paint, including plastic laminated sheet 1.6 mm thick for mounting switches, socket cover with fitting screw washer, including cutting chasses in wall/floor/roof for fixing of casing caping and making good the distributed surfaces matching with existing complete all as specified and as directed by Engr-In-Charge.

All as per Item no 6 here in before but with cable 2.5 sqmm wire for power point in casing caping medium grade of appropriate size complete all as specified and directed by Engr-In-Charge

All as per Item no 2 above here in before but with GI Flush in box for modular switch/ socket of sutaible size as required in concealed/ existing conduit with front plate for mounting of modular switch/ socket and combined cover plate of any size/ type as required at site complete all as specified and as directed by Engr-in-Charge.

All as per item No 8 above here in before but One switch / 5 Amp socket outlet point as same board with other switches complete all as specified and as directed by engr in charge

All as per item No 8 above here in before but One switch / 5 Amp socket outlet point independent but near switch board an same vertical/ Horizontal plane complete all as specified and as directed by Engr-in-Charge

All as per Item no 8 above here in before but with 2.5 sqmm size wire for power point and all accessories as required for modular switch socket mounting complete all as specified and directed by Engr-In-Charge

S&F for switch piano, flush type single pole, one way 5 Amps, 230 Volts complete all as specified and directed by Engr-In-Charge.

S&F for switch piano, flush type single pole, two way 5 Amps, 230 Volts complete all as specified and directed by Engr-In-Charge.

M&L for switch socket outlet 2in1, 5pin, 5Amp with mounting arrengement on two/ four holes complete all as specified and as directed by Engr-in-charge.

M&L for switch socket outlet 2in1, 5pin, 5/15Amp multipurpose with mounting arrengement on two/ four holes complete all as specified and as directed by Engr-in-charge .

S&F in replacment for Modular type switch one way 6/10 Amps, 230 volts matching with existing complete all as specified and directed by Engr-In-Charge.

S&F in replacment for Modular type switch one way 16 Amps, 230 volts, matching with existing complete all as specified and directed by Engr-In-Charge.

S&F in replacment for Modular type fan regulator 1/2 module as reqd matching with existing, 230 volts complete all as specified and directed by Engr-In-Charge.

S&F in replacment for Modular type bell push switch one way 6/10 Amps, 230 volts matching with existing complete all as specified and directed by Engr-In-Charge.

S&F in replacment for Modular type Socket 6/10 Amps, 230 volts matching with existing complete all as specified and directed by Engr-In-Charge.

S&F in replacment for Modular type Socket 16 Amps, 230 volts, matching with existing complete all as specified and directed by Engr-In-Charge.

S&F in replacment for socket outlet 2in1, 5pin, 5Amp with mounting arrengement on two/ four holes complete all as specified and as directed by Engr-in-charge.

S&F in replacment for socket outlet 2in1, 5pin, 15 Amp with mounting arrengement on two/ four holes complete all as specified and as directed by Engr-in-charge.

S&F in repairs Ceiling rose surface mounted with three terminals, PVC/Polycarbonate isolated body complee all as specified and directed by Engr-in-Charge.

S&F in repairs Bell push piano type, 5 Amps complete all as specified and directed by Engr-In-Charge.

S&F in repairs Call bell AC, 230 Volts matching with existing sample complete all as specified and directed by Engr-In-Charge.

Supply and fixing in replacement of starter switch 25 Amp, single phase 240V, polycarbonate,of size 2 Module with mounting provisions,terminal box, connector plate, cver plate etc complete all as specified and as directed by Engr-in-Charge

Supply and fixing in replacement of 32 Amps DP switch, single phase 240V, polycarbonate,of size 2 Module with mounting provisions,terminal box, connector plate, cover plate etc complete all as specified and as directed by Engr-in-Charge

S&F in repairs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20/32 Amps as reqd all as specified and directed .

S&F in repairs MCB, DB Double door type, made out of CRCA mild steel sheet flushed in wall, SPN 4 way with 200 Amps rated bus bar , 240 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including complete all as specified and as directed.

All as per item above here in before but for SPN 8 Way DB complete all as specified and directed by Engr-In-Charge.

All as per item above here in before but for TPN 4 way DB 415 Volts complete all as specified and directed by Engr-In-Charge.

S & F in replacement VTPN DB - Dobule Door made out of CRCA mild steel sheet flushed in wall, TPN 4 way with 200 Amp rated bus bar, 415 volt with PVC MCB blanking plate, stove enamelled for incorporated of MCBs, insulators and MCCB of capacity upto 125 Amps TP/FP etc, complete all as specified and as directed by engineer in charge.

Supply and fixing in repairs MCB TPN 415 Volt 63 Amps

Supply and fixing in repairs MCB SPN 6 - 40 Amps, 240 Volts

Supply & fixing in repairs MCB SP 06-40 Amp, AC, 240 volts,

Supply and fixing in repairs MCCB FP 415 Volts 125Amps, 16 KA

Supply and Fixing in repairs Bus bar Chamber indoor type with aluminium bus bar 100Amp TPN, with four outgoing ways fabricated out of sheet steel, duly painted with stove enamelled paint over a coat of red oxide with locking arrangement and mounting arrangement flush in wall/fixed in wall as reqd complete all as specified and as directed by engr in charge.

S& F in repairs Capacitor of rating 2.5/3.15 mfd 230 V

S&F in repairs Heating element 1500/2000Watt round/triangular type as reqd matching with existng at site complete all as specified and directed by Engr-In-Charge.

S&F in repairs Thermostat for 25/50 Ltr cap geyser and making connection .

S&F in repairs PVC connection 15 mm bore with PTMT nuts of length 450mm

S&F in repairs PVC connection 15 mm bore with PTMT nuts of length 600mm

S&F in repairs 5 Amp switch socket with junction box complete

S&F in repairs 15 Amp switch socket with junction box complete

S&F in replacement PVC insulated FRLS unsheathed multistranded copper cable1.5 sqmm.

S&F in replacement PVC insulated FRLS unsheathed multistranded copper cable 2.5 sqmm.

S&F in replacement PVC insulated FRLS unsheathed multistranded copper cable 4.0 sqmm.

S&F in replacement PVC insulated multistranded flexible three core copper wire 1.5sqmm.

S&F in replacement PVC insulated aluminium stranded conductor cable 2 core 6 sqmm

S&F in replacement PVC insulated aluminium stranded conductor cable 2 core 10 sqmm

Supply and Fixing in replacement of PVC Casing caping of size 18 mm x 8 mm with clips locking, complete all as specified and as directed by Engr-In-Charge.

Supply and Fixing in replacement of PVC Casing caping of size 20 mm x 12 mm with clips locking, complete all as specified and as directed by Engr-In-Charge.

S&F in repairs flush metal GI Box for Modular type switch and sockets flush in wall including cutting chasses to wall for fixing of box and making good to disturbed surface suitable for mounting 4 nos switch one module complete all as specfied and directed by Eng-In-Charge.

S&F in repairs flush metal GI Box for Modular type switch and sockets flush in wall including cutting chasses to wall for fixing of box and making good to disturbed surface suitable for mounting 6 nos switch one module complete all as specfied and directed by Eng-In-Charge.

S&F in repairs modular switch and socket mounting/cover plate with frame suitable for 4 module metal GI Box for modular type switches and sockets complete all as specified and directed by Engr-In-Charge.

S&F in repairs modular switch and socket mounting/cover plate with frame suitable for 6 module metal GI Box for modular type switches and sockets complete all as specified and directed by Engr-In-Charge.

S&F in replacement pole mounted light fitting for outdoor use Post top laltern/Garden Light with aluminum die cast base suitable for mounting on 40mm dia pole/pipe and polycarbonate white diffuser suitable for and including 9W LED lamp with B22 base of color as decided including B22 lamp holder complete all as specified and directed by Engr-In-Charge.

M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 1.5 Sqmm, 1100 volts grade (FRLS) and one run of 1.5 Sqmm FRLS PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including non metallic rigid PVC conduit medium grade as reqd complete all as specified and as directed by Engr-In-Charge. (Note :- Two runs of 1.5 Sqmm cable, one run of 1.5 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 4 Sqmm, 1100 volts grade (FRLS) and one run of 4 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through casing caping/existing conduit as reqd complete all as specified and as directed by Engr-In-Charge. (Note :- Two runs of 4 Sqmm cable, one run of 4 Sqmm continuity earth wire and one run of casing caping with all necessary accessories will be measured as one length).

M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through casing caping/existing conduit as reqd complete all as specified and as directed by Engr-In-Charge. (Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of casing caping with all necessary accessories will be measured as one length).

S&F in replacement of surface mounted Mirror light LED batten 2 feet 10 W with all accessories as required flexible copper 2 core wire from fitting to ceiling rose complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of surface & wall mounted LED batten 4 feet 20 W including flexible copper 2 core wire from tube light fitting to ceiling rose required length with all accessories all specified and as directed by Engr-in-Charge.

S&F in replacement LED weather proof bulk head light fitting of shape and size as per site requirment of wattage upto 10 watt matching with existing unserviceable light fitting with mounting clamp, LED driver holder, LED lamps etc including connecting up to in celling rose complete all as specified and as directed by Engr-in-Charge.

S&F in replacement LED downlighter light fitting of shape and size as per site requirment of wattage 15 to 20 watt matching with existing unserviceable light fitting with mounting clamp, LED driver holder, LED lamps etc including connecting up to in celling rose complete all as specified and as directed by Engr-in-Charge.

S&F in replacement LED recess/surface mounting as reqd 2x2 fittings 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with deffuser glare free light complete with driver, holders & LED lamp of colour as decided suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as derected by Engr-in-Charge

S&F in replacement building protection light fitting to be mounted on pole/bracket of minimum 50W, 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, corrosion resistant including optics for scattering light complete all as specified and directed by Engr-In-Charge.

S&F in replacment of 36 Watt LED recess/surface mounted 1'x4' panel light with electronic driver of operating voltage 110 to 265 Volts complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of 24/0.2mm size and taking down old unserviceable tube light fitting complete all as specified and as directed by Engr-In-Charge.

S&F in replacement LED inverter batten tube light fitting 4 ft 20 watts complete all as specified and as directed by Engr-In-Charge.

S&F in replacement wall mounting light fitting in plastic body with lamp holder B22 base and diffiuser sutaible for and including 9w LED Lamp of colour as decided with mounting provision complete all as secified as directed by Engr-in-Charge.

S&F in replacement ceiling fan motor of 1200 mm sweep complete with rotor, stator, outer body including 3 nos fan blades, down rod and other connected accessories matching with existing complete all as specified and as directed by Engr- in- Charge.

S&F in replacement Exaust fan motor of 250 mm sweep plastic body complete with rotor, stator, outer body and other connected accessories including mounting frame matching with existing complete all as specified and as directed by Engr- in- Charge.

S&F in replacement Exaust fan motor of 300 mm sweep metal body complete with rotor, stator, outer body and other connected accessories including mounting frame matching with existing complete all as specified and as directed by Engr- in- Charge.

M&L for preparation of surfaces for painting of Metallic Meter box/ Bus bar chamber of any size, with two coats of stove enamelled Paint of color as decided over a coat of red oxide primer both inside and outside of door complete complete all as specifed and as directed by Engr-In-Charge.

M & L in repairs earthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB complete all as specified & as directed by Engr-In-Charge.

PRIYADARSHINI CONSTRUCTIONS (BID ID -3107026)

GS TRADERS (BID ID -3106711)

Vasavi Electricals (BID ID -3106844)