work of providing and laying 900mm dia RCC NP-3 class sewer line from Palm Grove Road to Bazar Street (From Hyderabad Biryani to Bazar Street Junction) coming under AEE(WWM-K&T)-1 Sub division.

work of providing and laying 900mm dia RCC NP-3 class sewer line from Palm Grove Road to Bazar Street (From Hyderabad Biryani to Bazar Street Junction) coming under AEE(WWM-K&T)-1 Sub division.

Providing, erecting and removing casurina pole three tier BARRICADING using poles of 7.5 to 10 cms dia. and 1.5M height above ground fixed vertically at intervals of 2.0 to 2.5 M centre to centre and ...

Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Depth exceeding 1.5 m, but not exceeding 3 m

Depth exceeding 3.0 m, but not exceeding 4.50 m

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bra...

Depth exceeding 3 m, but not exceeding 4.50 m

Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specification, including setting out, construction of shoring, strutting, cost of blasting materials, barri...

Providing and installing sheet piling for both sides of the trenches for following depths with mild steel sheets of not less than 6.5mm thick, stronger knife edge, recessed spreader sockets, 3 inch si...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Construction of RCC Machinehole chambers of 1:1.5:3 proportion or approved type Cast-insitu / Pre-cast RCC Machinehole chambers, constructed using form vibrators of standard type, with barricading, da...

For every 0.1mt depth 3 to 4 mt

1.5m dia Man holes 4.mt dept

For every 0.1mt depth 4.00 to 5.00mt

Providing, filling and laying of sand bags filled with sand / clay for diversion of sewage during execution of work

Dewatering the sewage / storm water by using reqired HP submersible pump for the diversion of storm / sewage during the execution of work. Considering for one Pump.of 20hp

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanica...

Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface

Providing and laying Bituminous Macadam with 40/60 tph capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-40 @ 3.3% by weight of mix, transported t...

Excavating of ramming/jacking/driving pit and receiving pit of size 5.00m(length) x 3.00m (breadth), up to 4.00 m depth in all soil strata including shoring and strutting including cutting of Asphalt/...

Installation of product pipe by manual jacking method - Manufacturing, providing, transporting, rolling, lowering, laying & jointing, testing, commissioning of ERW (Electric Resistance Welded), SAW (S...