PROVN OF CERTAIN B and R AND E and M WORKS IN CERTAIN OMQ AND PROVN OF ADDL TOILET WITH SOAKAGE PIT IN BLDG NO. P-200 AT AF STN PALAM UNDER GE (AF) PALAM, DELHI CANTT - 10

Amount

Surface excavation n. exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil complete all as specified and as directed.

Removing excavated material soils n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. Note:- The Contractor shall remove debris /soil and to remove outside the MoD land.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Demolition of cement concrete (un reinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed. Note:- The Contractor shall remove debris /soil and to remove outside the MoD land.

Taking down cement plaster on brick or concrete wall surfaces etc including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and as directed. Note:- The Contractor shall remove debris /soil and to remove outside the MoD land.

M&L for brick work with sub class B works, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete all specified and as directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan, exc 6m mean radius, built in CM (1:4) complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 (using 40 mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred, stopped etc complete all as specified and as directed.

M&L for 15mm thick rendering of Ready mix mortar of approved make on brick/ concrete surfaces on external walls,fascia, parapet and chajjas finished the surfaces even and fair without using extra cement including water proofing compound by weight as per manufacturer's instructions, including necessary scaffolding up to (G+3 storey) complete all as specified and as directed.

M&L for Matte & glosss finished tiles as on vertical surfaces of size (450 x 300)mm x 8 to 10mm thick / (600 x 300)mm x 8 to 10mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including over 10mm thick rendering with CM (1: 4) as on vertical surfaces complete all as specified and as directed.

M&L for 18 to 20mm thick granite (jet black) work (table rubbed and polished ) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. Note:- Exposed edges to make half round shall be deemed to be included in unit rate.

M&L for RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in walls, beams, columns, roofs, landings balconies, footing, including necessary use and waste of form work complete all as specified and as directed.

M&L for RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in fascia, louvers, parapets, railing and chajjas and the like ncluding necessary use and waste of form work and scaffolding up to (G+3) storey complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Description all as per ser item No. 17.00 above but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders etc complete all as specified and as directed.

Excavation in post holes each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with around earth in layers not exceeding 25cm thick, watering and removing surplus spoil to a distance not exceeding 50m and making good surface complete all as specified and as directed.

S&F steel work in tubular/square/rectangular hollow section/angle iron, tee etc. for trusses/ purlins & rafter including special shaped washer etc. complete using ERW or induction butt welded tubes using Fe as per IS 4923, Grade YST 310 including necessary machinery for upto 10m height structure complete in all respect complete all as specified and as directed.

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars complete all as specified and as directed.

M&L for expanded metal, not exc 4 kgs and cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and as directed.

S&F 0.50mm thick Pre-painted galvalume aluminium Zinc coating steel GI based corrugated sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self taping screws complete all as specified and as directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in floor etc complete all as specified and as directed.

M&L for glossy finish coloured chequered cement concrete tiles of size (30cm x 30cm) x 25mm thick, set, jointed and pointed in neat cement slurry as in floor with and including over 20mm screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for heavy duty digital parking tiles of size (30cm x 30cm) x 8 to 10 mm thick, set, jointed and pointed in neat cement slurry as in floor with and including over 20mm screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for precast cement concrete louvers and jallies, 55mm thick (measured solid) in PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) set in cement mortar (1:4) including all mouldings but excluding frame complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in kerbs or mud stops, rounded or chamfered edges, etc complete all as specified and as directed.

S&F MS angle iron as in fencing posts, struts & "Y" angle holes drilled in for securing wire including cutting top to shape & with flat iron for securing wire mesh including all necessary drilling, bolting or riveting, weldings etc Fe-290 grade 165 complete all as specified and as directed.

S&F mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, n exc 5cm long dia of shank 5 to 10mm complete all as specified and as directed.

S&F mild steel round bar 10 mm dia and over cut to length bend to shape required including cranking bending spirally for hopping for colours hooking ends and binding with a including security bolts post and struts in fencing including cutting top to shape as directed drilling holes, notching for wire etc., complete all as specified and as direcetd.

Suply only chain link MS galvanised fencing of mesh size 50mm square with 10 gauge wire and not less than @2.80Kg per Sqm complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior emulsion paint over one coat of primer over 2mm thick (avg thickness) cement base wall care putty complete all as specified and as specified.

M&L for complete removal of existing treatment of old decorated external surface of walls by electrically operated grinder including necessary scaffolding complete and applying two coats of exterior emulsion paint over a coat of primer of same brand over 2mm thick (avg thickness) cement base wall care putty to obtain even and smooth surfaces including preparation of surfaces complete all as specified and as directed.

M&L for preparation of new steel and iron surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for painting of new steel surfaces of any description not otherwise described n. exc 10cm in width or girth including preparation of surfaces, priming with red oxide zinc chrome primer finished with two coats of synthetic enamel when unconnected with other painting or when painted in different tint complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:4) on brick/ concrete surfaces of walls, finished even and fair complete all as specified and as directed.

M&L for factory made precast cement concrete kerbs stone of PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) of any shape and size including chamfered angles, weathering or singly round throating etc including setting and jointing in cement mortar (1:4), including necessary formwork complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment, conforming to IS 15658-2006 of 60 mm thickness, M-35 grade glossy finish including 25mm thick sand cushioning complete all as specified and as directed.

M&L for applying two coat of synthetic enamel paint on old and new concrete surfaces of any description over 10cm girth or width over a coat of primer including necessary preparation complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and exc 1.5 m and n exc 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed.

Excavation over area n.exc 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation over area exc 1.5 m but n exc 3.0 m deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation over area exc 3.0 m but n exc 4.5 m deep and getting out in soft/loose soil complete all as specified and as directed.

M&L for brick works with sub class ‘B’ bricks old size in one brick thick honey comb walling built in CM (1:4) complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in foundation/mass concrete complete all as specified and as directed.

M&L for precast cover slab in cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) set in CM (1:4) including necessary use and waste of form/ moulds etc complete all as specified and as directed.

M&L for cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in surface channels and drains/ coping complete all as specified and as directed.

Supplying and laying 150mm bore reinforced cement concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and as directed.

M&L for PCC (1:3:6), type C-2, (using 40mm graded stone aggregate) as in concrete bed to drain pipes of 150mm bore including packing under and haunching against the sides of pipes, after they are laid and tested complete all as specified and as directed.

M&L for 15mm thick rendering on brick or concrete wall surfaces in cement mortar (1:6), finished even & smooth without using extra cement complete all as specified and as directed.

M&L for 5 mm thick cement plaster in cement mortar (1:3) as on ceiling & plastering to be finished even & smooth without using extra cement complete all as specified and as directed.

M&L for 40mm thick damp proof course to horizontal or vertical surfaces including necessary formwork using cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) mixed with water proofing compound complete all as specifified and as directed. Note:- Water proofing compound shall be measured & paid separately under supply only item.

M&L for 25mm thick cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in floor etc complete all as specified and as directed.

M&L for coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile colour with and including over 10mm thick screed bed with CM (1: 4) complete all specified and as directed.

M&L for 100mm thick cement concrete (1:4:8) type D2, (using 40mm graded granite stone aggregate) as in sub base including use and waste of form work complete all specified and as directed.

M&L for hardcore gauge n.exc 63mm of broken stone or boulders deposited, spread and levelled in layers n.exc 75mm thick, watered and well rammed to a true surface complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C2 (using 20mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, including making joints 12 mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen 85/25 and sand in the proportion of (1:3 ) by weight complete all specified and as directed.

Use and waste of formwork to soffit of slabs etc n. exc 200mm thick, flat, rough finished surfaces complete all as specified and as directed.

M&L for 75mm bore cast iron soil waste/ and vent pipe in any length with or without ears with cement joints fixed to walls complete all specified and as directed.

M&L for CI vent cowl 75mm bore complete all specified and as directed.

M&L for 110 mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 110mm PVC (SWR) WC connector bent type complete all as specified and as directed.

S&F PVC (SWR) junction single (single 'T') equal or unequal 110mm bore complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75 mm bore complete in all respect as specified and as directed.

S&F PVC (SWR) 75mm dia bend complete all as specified and as directed.

S&F 15mm bore of tubes medium grade galvanised with all fittings fixed complete to walls and ceiling or laid in floors including necessary cutting of chasing etc complete all as specified and as directed.

S&F 20mm bore of tubes medium grade galvanised with all fittings fixed complete to walls and ceiling or laid in floors including necessary cutting, chasing etc complete all as specified and as directed.

S&F 20mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron/CPVC pipe/fittings and fixed complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks of capacity 1000 ltr (cylindrical vertical with closed top) three layered white colour including two GI tank nipples one at inlet and other at one outlet of 20mm dia, anti mosquito cap complete all as specified and as directed.

S&F wash hand basins, vitreous china of size (550 x 400)mm (flat back or angle back type), including cutting for and pinning in ends of brackets over new angle iron erecting stand embedded in PCC (1:2:4) block including 32mm dia bore waste fitings cast copper alloy chromium plated with long screwed shanks and flynuts flange and beded in red lead cement, PVC waste pipe including 15mm bore dia fancy type CP finish Pillar tap, cast copper alloy with capstan heads, screwed down high presuure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron/CPVC pipe/fittings complete all as specified and as directed.

S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S&F PVC valveless, syphonic action type, low level, dual flush cistern, of capacity 10 lit, white, with inlet ball valve, float and handle including brackets & flush pipe of polyethylene complete all as specified and as directed.

S&F 15mm bore dia CP finish, bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron/CPVC pipe/fittings or for brass ferrule including cup washer/flange complete all as specified and as directed.

S&F 15mm bore dia CP finish, angle valve, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron/CPVC pipe/fittings or for brass ferrule including cup washer/flange complete all as specified and as directed.

S&F vitreous china wash down water closet Pan (pedestal pattern) white including plastic water closet seat cover, white, closed pattern with flat bottom, and mild steel chromium plated hinging device (exclusive flushing cistern and flush pipe) complete all as specified and as directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement floor trap complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for loose filling with broken brick aggregate of gauge 80 to 150mm in soakage pits and soakage well etc. complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, fixed in opening as per specification & drawing complete all as specified and directed.

S&F 75mm size butt hinges medium weight, cold rolled mild steel (ISI marked) complete all as specified and directed.

S&F aluminium handle cast type anodised 150 mm size (ISI marked) complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section and fixed 150mm complete all as specified and as directed.

S&F pre- painted galvalume aluminium zinc coating GI based trapezoid profile steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with bituminous washer complete all as specified and as directed.

M&L for preparing new plastered surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of new plastered surfaces of ceiling surface and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and as directed.

S&F steel work in tubular/square/rectangular hollow section/angle iron, tee etc. for structural trusses including special shaped washer etc. complete using ERW or induction butt welded tubes using Fe as per IS 4923, Grade YST 310 including necessary machinery for upto 10m height structure complete all as specified and as directed.

Supply and fixing of decorative gate light/garden light new generation, IP 65 LED post-top family, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. Clear Cover offers bright illumination for different applications suitable for pole dia Ø 50mm for 15 Watt with 4 feet long PVC pipe 40mm dia including PCC block for fixing of GI pipe complete with all accessories internally pre wired and including connecting up two core copper conductor cable complete all as specified and as directed by Engr-in-Charge. Make:- Cat part No. RUBYNXTPT15WLED730PSYMTOPC of make havells or equivalent of make Bajaj / Philips.

Material and labour for submain wiring concealed in wall/surface with 2 run of 1.50 sqmm PVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked with all conduit fittings & fixing accessories and one run of 1.50 sqmm multistranded copper conductor cable FRLS as continuous earth wire complete all as sepcified and as directed.

Supply and grouting of GI pipe dia 50/80mm in existing brick gate pillars inside 15 cm and exposed 15 cm for fixing of gate light complete all as sepcified and as directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with and inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sqmm nominal cross section 2 core stranded conductor in service connections complete all as sepcified and as directed.

S&F weather proof PVC MCB box for DP MCB suitable for outdoor used (IP65) complete all as specified and as directed by Engr-in-Charge.

S&F SPN 32 Amps, 240 volts, "C" series, 10 kA duly ISI marked complete all as sepcified and as directed.

M&L for boring of holes under road, pavement, hard standing for laying pipe for crossing cable including getting out, disposal off rubbish to a distance upto 50 Mtrs including 20 mm bore GI pipe medium grade complete all as sepcified and as directed.

S&F mild steel galvanised pipe, light grade, 50 mm nominal bore for making foundation for fixing of GI pipe for garden light of length 1 mtr complete with and including foundation complete all as specified and as directed.

S&F garden light made up of high grade unbreakable polycarbonate material suitable for LED lamp (B-22) Moon 200 base suitable for pole dia 60 mm (max) OD. Dimension:- width: 200 mm & height :227 mm for Moon decorative gate light including 5/8 watt LED bulb complete all as specified and as directed by Engr-in-Charge.

Kunal Construction Co. (BID ID -3512609)