REPAIR TO CHAJJA FACIA, LEAKAGE, SEEPAGE AND OTHER MISC WORKS TO OTM AND MD ACCN IN ZONE-VI UNDER AGE B/R-IV OF GE (SOUTH) MEERUT CANTT

Amount

Dismantling of old wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets and M&L for provision of powder coated GI frame work(snap grid) suitable for size as in false ceiling of size 605mm x 605mm including fixing 4mm thick gypsum board/E board in ceiling size 60cm x 60cm fixed to metalic snap grid consisting of followings and all as directed:-i) Powder coated GI sections incorporated in frame work shall conform to designation 63400 given in IS: 737-1986. ii) The snap grid shall consist of powder coated GI main /cross tee of size 36.5mmx25mmx1.0mm thick and 25mm x 25m x1.0mm thick, respectively. iii) Snap grid frame shall be fixed to ceiling with supporting hangers consisting of S & F 2mm to 4mm dia mild steel GI wire. iv) The main and cross tees shall be jointed at junction/crossings with powder coated GI angle bracket, of size 15mmx15mmx1.0mm thick, fixed with suitable mild steel, bolts, nuts and washers all as per manufacturer’s instructions. v) The snap grid (main/cross tee section) shall be supported at ends all along the wall with powder coated GI angle of size 25mmx25mmx1.0 mm powder coated GI thick. vi) Size of the snap grid shall be 605mm by 605mm. vii) Minimum average thickness of powder coating shall be 15 micron complete all as specified & directed.

M&L 6mm thick fibre cement, corrugated or semi-corrugated shets in roofs, walls, etc. Fixed with L-type or J-type or cranked hook bolts including Dismantling of old sheet any description as in roof covering incl ridge and removing from site complete all as specified & directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including ridges, Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

S&F rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries,wind tie, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, reveting and / or welding or connecting with bolts and nuts (including revets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc, also for wedging, plumbing, truing up and fixing conf to Fe-410-W (Gde-E-250) quality A complete all as specified and directed.

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 complete all as specified & directed.

S&F plain galvanised 0.63mm, MS sheeting as in ridges, crumple section, hips, valley gutters, drips and straight flashings ( length & girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified & directed and as per manufacturer's instructions

Material and labour for Water proofing treatment to sunken floors of kitchen, toilets, laboratories, bath anc WC's etc shall be as under :-(a) Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work to a distance exc 200 m compete all as specified and directed. (b) Application of Two component Acrylic modified cementitious coating (i) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance, existing coatings and achieve a gripping profile that is clean, dry and free from laitance and any other form of surface contamination. The installation instructions in manufacturer's published literature should be strictly complied with, including but not limited to the following (ii) Chipping out any visible cracks in "V-Groove" pattern as applicable. Special attention on this part. Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty/ Dr Fixit 302 SBR latex / Perma latex SBR / FOSROC Nitabond SBR latex / Asian Paints latex as required. Final cleaning of surface with power grinder, wire brush, hair brush & vacuum pressure if required. (iii) Dampen all surfaces immediately ahead of application of Acrylic modified Cementitious coating of Sika Top Seal - 107 / Brush Bond FOSROC/ Dr Fixit/ STP/CICO. (iv) Whilst the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified Cementitious coating of Sika Top Seal - 107 / Brush Bond FOSROC/ Dr Fixit/ STP/CICO of viscosity as per manufacturer's instructions. |(v) Apply Glass Fabric Sheet of Sika Fab 1 / FOSROC/ Dr Fixit/ STP whilst the first coat is wet. (vi) Once touch dry, apply second coat of Acrylic modified Cementitious coating of Sika Top Seal - 107 / Brush Bond FOSROC/ Dr Fixit/ STP/CICO of viscosity as per manufacturer's instructions on the entire area. (vii) Second coat shall be applied after 6-8 Hrs of application of previous coat and in the direction right angle to the previous coat.

Material and labour for damproofing to wall with two component Acrylic polymer cementitious water proof elastomeric coating four grade mix to form uniform slurry and apply with paint brush as first coat then laying a layer of fibre glass mesh cloth as first coat is still green with overlap of joints of fibre mesh not less than 100 mm, then finally apply second layer mix by brush to entire surface of container covering 0.6 - 0.75 Sqm /Kg at 1 mm thickness in two coat depending on the level of substrate and curing it for minimum 3 days. Note: Quoted rate shall be deemed to be inclusive of materials all labours, tools and plants, scaffolding and working upto height 6 metre etc complete all as specified and directed.

M & L for cutting of bushes small trees (Peepal small plants etc) trunks shrubs of any dia and girth from roof projection, chajjas , wall junction parapet etc at any height by necessary demoliton of brick work etc if required and making good distrubed surfaces to match with existing finishes with and incl material and labore rendering mixed in CM 1:4 mixed with WPC /PCC 1:3:6 type B0 /Bk work in CM 1:4 as required at site and as directed by Engr-in-Charge

Taking down existing water proofing treatment from top of RCC/arch slab, including PCC Padding or plaster or brick bats and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as spefied and directed.

Material & Labour for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregates) as in padding on roof finished even and fair without using extra cement all as specified and directed.

Material and Labour for 10mm thick cement paster in CM 1:4 mixed with WPC @200ml per 50 kg of cement consumed or as per the manufacturers instructions finised even and smooth without using extra cement on roof surface when concreate is green and wall (WPC will be measured and paid seperately as supply only rate) complete all as specified & directed.

Material & labour for cleaning of concrete surfaces and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed by evenly a track coat @ 1.20 kg per Sqm using with 85/25 grade industrial bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane with non-woven polyester reinforced of weight not less than 3 kg per Sqm unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using with 85/25 grade industrial bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.200 kg per Sqm as per manufacturer’s instructions complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site.

All as per Item No.17.00 here-in-with but 20 mm bore pipe.

Supply & fix 15 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors complete all as specified & directed.

Supply, fix 20mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors complete all as specified & directed.

Supplying and laying of CPVC 20mm outer dia pipes (concealed) SDR 11 & Plain CPVC SDR 11, with all fittings (including brass fittings/fixtures) and fixed on walls/ceiling (concealed) or laying in floors complete all as specified

Supplying and laying of CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified

S&F in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe including all neccessary fittings complete all as pecified and directed.

S&F as in repair 15mm bore pillar tap, long shank, swan neck, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts complete all as specified & directed.

S&F as in repair 15 mm bore bib tap long body chromium plated, cast copper alloy, with crutch or butterfly handle, flange, screwed down for iron pipe or for brass ferrule, including all neccessary fittings and fixtures that are required for proper functioning complete all as specified and directed.complete all as specified and directed.

Supply & fix in repair wall mixture telephonic with crutch brass chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm bore pipes with telephonic with crutch (Provision for hand shower) complete all as specified and directed.

S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union.

S&F in repairs 15 mm thick Bip tap standard of PTMT any colour screwed for iron pipe and fixed (Minimum weight 15mm - 90gms/20mm-125gms) complete all as specified and directed.

S&F as in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, white, with integral footrest, including flushing cistern & flush pipe fixed as in repair with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

S&F as in repair vitreous china wash down water closet pan (pedestal pattern), white (flushing cistern and flush pipe) fixed with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

Supply and fixing as in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor complete all as specified and directed.

Supply & fix in repair white plastic seat cover for W.C.(E.T.) white including M.S. CP or aluminium hinging device complete all as specified and directed.

S&F as in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed.

Supply & fix in repairs chromium plated shower roses with swivel joints of 75mm size complete all as specified & directed.

S&F in repair chromium plated Jet spray with suitable flexible pipe to EWC for 15mm bore with fittings, complete all as specified and directed.

S&F in repair chromium plated hand shower with 1.00 mtr flexible pipe for 15mm bore with fittings, complete all as specified and directed.

Supply & fix in repairs PVC connections of 600mm long Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply and fix in repairs PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

S&F in reipair CP towel rail brass 20mm dia 600mm long with bracket CP finish complete all as specified and directed.

S&F in repair Glass Corner Shelf fitted in wall with screws complete all as specified and directed

Supply & fixing in repair rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve complete all as specified & directed.

Supply & fixing in repair rotational moulded polyethylene water storage tanks 1000 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve complete all as specified & directed.

S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified & directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 15 mm dia complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified and directed.

Supply and fix in repair for 75mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste complete all as specified & directed.

Supply and fix in repair for 110mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste and rain water pipes complete all as specified & directed.

Supply and fix in repair PVC bends 75mm bore, any radius complete all as specified & directed.

Supply and fix in repair PVC bends 110 mm bore, any radius complete all as specified & directed.

S&F in repair 110mm PVC (SWR) vent cowl complete all as specified & directed.

S&F in repair 110 PVC (SWR) junction single, (Single T) equal or unequal complete all as specified & directed.

S&F in repair 110mm PVC (SWR) 'S' trap complete all as specified & directed.

S & F in repair stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified & directed.

Supply and fix in repair for 75mm bore PVC floor traps plain with grating fixed in repairs including jointing with solvent cement complete all as specified & directed.

Supply & fix in repairs steel C.P. grating 100/125 mm dia waste pipe hole fitted as required at site complete all as specified and directed.

S&F in repair 15 mm bore concealed stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, as in repair including flench complete all as specified & directed.

Material & labour vitrified coloured tiles of size 600x600x8-9mm thick, coloured, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) including Dismantling of old tiles complete all as specified & directed.

Material & labour non-skid coloured ceramic tiles of size 400x400x7-8mm thick, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) including dismantling of old tiles complete all as specified & directed.

Material & labour for glazed coloured ceramic tiles of size 600x300x6-7mm/450x300x6-7mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:6 including dismantling of old tiles complete all as specified & directed.

Demolition of cement concrete in ground floors and Paving n.exc. 15 cm thick (below or above ground level) complete all as specified and directed .

M&L Brickwork with subclass ‘B’ bricks old size , straight or curved on plan exc 6m mean radius, built in CM (1:6), straight or curved on plan exc 6m mean radius, built in CM (1:6) including complete all as specified and directed

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.all as specified & directed

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.

M&L for 15 mm thick rendering in two layers on fair faces of brick work or concrete surfaces first layers 10 mm thick with cement mortar 1:4 on fair faces of brick work or concrete surfaces and second layers 5 mm thick with cement mortar 1:4 with mixing with liquid water proofing compound @ 200ml per 50 kg of cement consumed or as per manufacturer’s instructions complete all as specified and directed. (Note:- Water Proofing compound shall be measured and paid separately under respective item)

M&L rendering 10mm thick in patchy on fair faces of brick work or concrete surfaces finished even and fair on walls in cement mortar (1:6), complete all as specified.

M&L Rendering 05 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified.

M&L three coats of white washing on new ceiling/chajja surfaces including preparation of complete all as specified and directed.

Materials & labour for preparation of newly plastered surface of wall etc and applying two coat of cement base paint, any colour over and including primer to match the existing as required, complete all as specified & directed.

Materials & labour for prepration of old plastered surface and applying one coat of Oil Bound distemper complete all as specified & directed.

Materials & labour for prepration of new plastered surface and applying one coat of Oil Bound distemper complete all as specified & directed.

Demolition of reinforced cement concrete n.exc. 15 cm thick (below or above ground level) complete all as specified and directed .

S&F rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated)Fe 410-W (Gde?E- 250)complete all as specified and directed.

S&F in repair for 2mm thick fiber glass reinforced transulant plain sheet fixed with and incl catch srew and nut bolts as in sun shade chajjas etc fixed in any position and height complete all as specified and directed.

S&F in repair brass spindlle of No 2/3/4 for CP bib taps/angle cock/pillar taps etc complete all as specified and directed.

Materials and labour for 12mm thick black granite slab (width and length as per site requirement) as in cooking platform, stairs window cill & jambs and like bedded over including 10mm thick rendering in CM 1:4 including making holes and bullnozed moulding on edges and jointed with cement slurry and pointed with white cement with the admixture of pigment to match complete all as specified and directed.

S&F in repair sink mixture (Wall mounted model) with all the necessary fittings complete all as specified and directed.

Material & labour for preparation of new steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over 25mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed.

M&L Sand for cushioning, including spreading and levelling in layers n exc 25 mm thick.

M&L PCC 1:4:8 type D2, (using 40 mm graded stone aggregate) as in as in sub base of flooring or path etc complete all as specified and directed.

M&L Chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors With Grey Cement and pigment laid over including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F in repair stainless steel sink with draining board, made out of 0.72 mm thick sheet for kitchen with waste pipe, CI cantilever brackets, connecting union over all size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed.

S&F stainless steel plate rack of size 750 x 600 mm incl. shelves , rod to put plates etc made out of 0.70mm thick stainless steel sheet after taking down old one complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced suitable for solid PVC door suppling & fixing in opening, complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing including three no of stainless steel butt hinges 100mm in size, two no of aluminium anodized barrel tower bolts of extruded section 200mm long (dia of bolt not less than 10mm) and two no of aluminium anodized handles of size 150 mm complete all as specified and dircted.

Taking down chowkhats or frame not exceeding 1.5 Sq. m each with shutters without taking off shutters from the frame complete all as specified and directed.

m/s gupta construction (BID ID -3364310)