SPECIAL REPAIR TO PERIMETER FENCING EXISTING GAPS NEAR GARDEN CITY, SPECIAL REPAIR TO MDC (KT) LINE AND PROVN OF 02 X 2 TON AC WITH ALLIED INFRA FOR OT OF MDC UNDER GE DEHU ROAD

Amount

Job No SHQ/DEHU/BLDG/2025-26/03 Dismantling posts of struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground (Natural ground/concrete, brick work) full length of post to be measured complete all as specified and directed by Engineer-in-Charge

Dismantling of chain link fencing wire mesh or any type including barbed wire fencing, folding servicable fencing for reuse complete all as specified and directed by Engineer-in-Charge

Excavation in post holes (or similar hole) each n. exc. 0.5 cum, getting out, returning filling and ramming earth or broken rubble mixed with earth around in layers n. exc. 25cm watering and removing surplus soil to a distance n. exc. 50cm and making good surface in soft and loose soil complete all as specified and directed by Engineer-in-Charge

M & L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate ) as in foundation concrete for fencing post complete all as specified and directed by Engineer-in-Charge

S & F for angle iron fencing post and struts including cutting tops to shape as directed, drilling holes, notching for wire etc , flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-0 or Fe 310-0 anyu size.for doors, balusters, nosing to steps including embeding in concrete and screwing etc.complete all as specified and directed by Engineer-in-Charge

S & F for MS Screw bolts ( machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length exc. 5 cm but not exc 10 cm long 5 to 10mm dia of shank etc complete all as specified and directed by Engineer-in-Charge

Supply only chain link MS galvanised fencing incl line wire 50x50mm mesh (12 gauge) size and any type of strands, rails, straining bolts etc incle provn of binding wire all complete all as specified and directed by Engineer-in-Charge

Fixing only chain link fencing any mesh, size and type to any type of standards, rails, straining bolts etc incl provn of binding wire complete all as specified and directed by Engineer-in-Charge

M&L for round bars 10mm dia and over cut to length bent to shape required incl cranking, bending spirally for hoping for columns, hooking ends and binding with and incl MS Wire (annealed) not less than 0.9mm dia or securing with clips etc.complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc (each line wire to be measured)

M&L Cement concrete 1:4:8, type D2 (40mm graded stone aggregate) as in foundationn, filling and mass concrete, complete all as specified and as directed by Engr-in-charge.

Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified

Material and labour for Modular Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in and setting in mortar CM 1:6, complete all as specified and as directed by Engr-in-charge.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:4, complete all as specified

M & L preparation to plastered surface of walls and applying 2 coats of cement base paint over and including priming surfacesall as specified and directed by Engr-in-Charge

M & L for two coats of synthetic enamel paint to new steel surfaces over a coat of red oxide primer surfaces of any description exc 10 cm in witdth or girth complete all as specified and directed by Engineer-in-Charge

M & L for preparing new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer surface area not exc. 10cm in width or girth complete all as specified and directed by Engineer-in-Charge

M & L Framed work as in doors or gates of angle or other section, hollow section with gusset plates, rail, braces, etcof Fe 290 Gde E 165 complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc.complete all as specified and directed by Engineer-in-Charge.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc.complete all as specified and directed by Engineer-in-Charge.

Job No : SHQ/DEHU/BLDG/2025-26/06 (B/R Portion) Dismantling plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismanteling MS works of any desc. not otherwise provided for complete all as specified.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.. conf to Fe-410-w(gdeE-250 quality-A).

M &L for MS work as in wind tie or any other work including cutting, drilling holes etc.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

All as per item No. 24 above but fix in valley gutter / ridge etc.

Demolition of brick or stone work built in cement mortar including all arches, pillars all quoins etc complete all as directed.

M&L for brick work with sub class 'B' brick built in cement mortar 1:6, straight or curved on plan exc 6 m mean radius, complete all as specified

Dismantling wall/ ceiling boards(fiber pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets all as specified as directed by Engr-in-charge

S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing& fixing 10-12 mm thick gypsum board 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 6 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long all as specified as directed by Engr-in-charge

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar all as specified as directed by Engr-in-charge

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed no pigment to match the shade of the slab over and including rubbing and polishing, screed bed of mortar 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified.

Material and labour for 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite cement mortar 1:6, 15 mm thick etc over and including screed bed or bedding layer of complete all as specified and as directed.

Dismantling of PVC water tank of capacity upto 1000 litre complete all as specified and directed.

S & F rotational moulded polyethylene water storage tank of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed.

M & L for vitrified ceramic tiles 10mm thick, light shade (square/rectangular) polished, area of each tiles exceeding 0.36sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or cloloured cement to match over and including screed bed in CM 1:6 all as specified as directed by Engr-in-charge

All as per item No 36 above but on skirtings over and including 10 mm th rendering in CM (1:4) complete.

M&L for Non-skid white/ coloured Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified.

M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx350x7 to 8 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4 all as direced.

Taking down chowkats or frames with shutters ( without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each and removing to store.

All as per item No 40 but n'exc 1.5 Sqm each.

Taking down shutter of any description exc. 1 sqm but not exc 2 Sqm each complete all as specified and directed.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing etc complete all as specified

S&F factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing etc complete all as specified

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm etc complete all as specified and directed by Engr-in-Charge.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm etc complete all as specified and directed by Engr-in-Charge.

S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified.

S & F for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including frame and necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws, mortice lock, door stooper, hydraulic door closer, other fitting arrangements as required etc.and 4.8 mm thick sheet glass ordinary quality plain and glazing Complete all as specified and directed.

S&F medium density particle board, 18/19 mm thick, flat pressed three layer or multilayer and graded (grade I or grade II) bonded with BWP adhesive , fixed with screws to timber frame work/steel frame work for cabinets etc complete all as specified

S&F External teak wood lipping 6 mm thick for 18/19 mm thick particles board, block board or veneered particle board fixed with nails. (for Kitchen cabinets, cupboards) etc complete all as specified

S&F stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples etc complete all as specified

S & F of 150 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

S & F of 150 mm long extruded anodised aluminium alloy handle, complete all as specified and directed.

S&F 125 mm MS, Butt hinges,medium weight cold rooled fixed with screw or welding complete.

S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt or cast aluminium alloy complete all as specified and directed.

S & F for 300mm mild steel , ordinary rat tail rod pattern springs including roller and roller plate complete

S & F in repairs 25 mm Stainless steel curtain rod with fixed to brackets, stops, complete all as specified and directed.

Demolition of concrete ( unreinforced ) in ground floors and paving nexc 15 cm thk (below or above ground level)

M & L 75 mm thick Cement concrete type C-2, 1:3:6 (40 mm gr agg) as in plinth protection finished even and fair .

S & F in repairs Ball brass valve high pressure with polythene float and nuts complete screwed for iron pipe or brass furrule bore of pipe 20 mm dia complete all as specified.

Taking up or down steel tubes and connections including cleaning for refixing or removal to stones bore of pipe 15mm.

All as per item No. 62 above but bore of pipe 20mm

Supplying and laying16 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete incl concealed etc all as specified

Supplying and laying 20 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete incl concealed etc all as specified

S&F in repair stop valves fancy type cast copper alloy with capstan heads screwed down high pressure screwed both ends for iron pipe or union fixed for 15 mm dia GI pipe.

Supply and fix Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F PVC SWR Nahani/floor trap plain with grating including jointing with solvent cement, dia of outlet 75mm, water seal minimum 75 mm, complete all as specified

S&F for chromium plated two way bib cock with wall flange 15mm dia equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F bib taps chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe etc complete all as specified

S&F Grating round 140 mm size of PTMT with or without hole(Minimum weight 50gms.)

M&L in repair for vitreous china wash basin, white, flat back, size 550x400mm including waste pipe, porcelain stopper and brackets including cutting for and pinning in ends of brackets or erecting stand PVC connection 15mm dia , 450 mm long HDPE pipe etc. complete all as specified

S&F 15mm nominal size,fancy type pillar taps, cast copper alloy body and body components with capstan heads, spindle, washer plate and nut with screwed shanks and back nut, with or without lettered hot or cold, nickel-chromium plated finish complete all as specified

Supply and fix in repairs for vitreous china EWC of white colour with plastic water closet seat closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, including connection to drain or out going pipe and to PVC flusing pipe, antisyphonage pipe and all necessary fittings etc complete all as specified and as directed.

S& F in repairs stainless steel Sinks kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each complete all as specified.

S & F for PVC connection pipe 15mm dia with PTMT nuts of length 450mm

S&F PVC low/high level flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl bracats fixed in repairs all as directed. (Note:- Removing existing fluhing system of CI or any other quality incl brackets) etc complete all as specified.

Taking down cement plaster of any description of brick or stone wall etc incl racking out joints and hacking for key, scrubbing down with water etc complete.

M&L for rendering15 mm thick on brick masonry surfaces or other than fair faces of brick work or on one side of lathing (on vertical surfaces ) in cement mortar 1:6 finished even and smooth without using extra cement etc complete all as specified

M&L for rendering 15 mm thick on brick masonry surfaces or other than fair faces of brick work or on one side of lathing (on vertical surfaces ) in cement mortar 1:4 finished even and smooth without using extra cement etc complete all as specified

M&L for 05 mm thick rendering on ceiling surface in cm 1:3 on concrete surface of roof slab , beam column etc finished even and smooth without using extra cement etc complete all as specified

M&L for two coat OBD over a coat of primer, over 3mm thick putty including preparation of newly or old plastered surface of wall etc complete all as specified

M&L for two coat exterior weather proof Apex paint over a coat of alkali resistance primer incl preparation of newly or old plastered surface etc complete all as specified

M & L for three coat white wash on ceiling surface incl preparation of new or old plastered surface etc complete all as specified

M & L for preparation of new wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified

M & L for preparation of old wooden surfaces exc. 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M & L Two coat of synthetic enamel paint on New or old steel surfaces over 10 cm width or girth incl prepration of surfaces over red zinc chrome primer etc complete all as specified

M & L One coat of synthetic enamel paint on Old steel surfaces over 10 cm width or girth incl prepration of surfaces over red zinc chrome primer etc complete all as specified

M&L Two coat of synthetic enamel paint on New or old steel surfaces nexc 10 cm width or girth incl prepration of surfaces over red zinc chrome primer etc complete all as specified

S & F three track sliding window including frame with two shutters with 4 mm thick tinted glass and one shutter using stainless steel wire cloth 0.36 mm nominal dia & 1.18 width aperature for mosquito proofing with good quality bearing handle, lock, rubber beading and glasing clips etc fabricated using following aluminium anodised sections confirming to catalogue of 'Jindal' or of equivalent make complete all as spd and directed by Engr-in-Charge. (a) Bottom frame-20620 (b) Top & Vertical frame - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & bottom -20844 (f) Glazing clips - 19352 (Note :- Cost of tinted glass & wire cloth shall be included in the quoted rate of item) etc complete all as specified

S & F hot rolled medium and high tensile structural steel of grade E-165 as per IS 15911:2010 as in framed work such as grills, grating etc with ends of bars of shouldered and /or riveted, or forged into spikes, framed guard bars barred iron doors ; ladders ; framed balusters; walk ways; railings; framework water tanks and similar work etc complete all as specified

E/M Portion Taking down old point wiring & M&L for point wiring with 1.5 sqmm multistranded copper conductor cable of PVC insulated and unsheahed type alongwith 1.5sqmm PVC insulated unsheathed single stranded copper conductor cable for continous earthing in & incl casing / caping or PVC Pipes & accessories having ISI marked surface type to be fixed with proper screws/(MS steel strips if required) including hard PVC boards of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator setc for Note:- Screws used for fixing PVC boards, casing & caping ceilling rose square blocks etc should be nickel cadmium screws:-

All as per item No 93 but one light point controlled by one switch

All as per item No 93 but One light point controlled by two 2 way switches.

All as per item No 93 but One fan point controlled by one switch & regulators

All as per item No 93 but One socket 5 pin 5 Amps flush type on independent board

All as per item No 93 but One socket 5 pin 5 Amps flush type on same board

M&L for point wiring with 2.5 sqmm single core multistranded copper conductor cable of PVC insulated and unsheathed type alongwith 2.5sqmm PVC insulated unsheathed single core multistranded copper conductor cable for continous earthing in & incl PVC casing / caping or PVC Pipes & accessories having ISI marked surface type to be fixed with proper screws/ (MS steel strips if required) including hard PVC boards/Boxes of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator etc . Note:-color coding to be followed as given R-Phase,B-Neutral & G- Earthing

S & F in repair submain wiring with cable insulated single core multistranded copper conductor cable 1100 volts 2x 4 sqmm drawn through & incl PVC casing caping / PVC conduit of suitable size alongwith 4.0 sqmm copper conductor cable for earth continuity.

S&F switch piano flush type single pole one way 6 Amps

S & F in repair swith piano flush type 250 volts,single pole two way 6 Amp Make- Havells/Legrand/leader/Crabtree

S&F switch socket combination 2 in 1, 5 Amps flush type

S&F switch socket combination 2 in 1, 15 Amps flush type

S&F lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings

S&F ceiling rose surface type 65 X 50mm, isolated body with 3 terminals to be fixed on PVC block

S&F regulator electronic step type for ceiling fans suitable for AC 230 volts 50 Hz 1200 / 1400mm sweep

MCB DB SPN sheet metal enclosure double door suitable for mounting MCB 240 volts with 200 Amps rated busbar 8 way

MCB DB TPN sheet metal enclosure double door suitable for mounting MCB 415 volts with 200 Amps rated busbar 4 way.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP , 5- 32 amp to fit in the MCB DB complete with connection testing and commissioning.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN ,32 amp to fit in the MCB DB complete with connection testing and commissioning.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) TPN ,32 amp to fit in the MCB DB complete with connection testing and commissioning.

Supply and fixing LED lights fitting 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Material and labour for replacement of unserviceable Security light bracket made out of GI pipe 1.2 mtr long 40mm dia medium grade bent to shape as directed including 2 nos MS clamps made out of 40mmX6mm flat iron for fixing on wall including nuts and bolts of required size all as directed incl taking down of old unserviceable bracket.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast luminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed.Note :- Old ceiling fan should be deposited at MES store.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm all as directed by Engr in Charge.

M&L for earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick burried burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level duly connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plare No 3,connected to earthing test point all as specified or indicated including testing on completion including excavation and earth work in any strata,PCC Chamber with cover,Charcoal and Salt as required & 15 mm Light Grade GI pipe from steel plate to DB in order to ensure satisfactory earth resistance result to the entire satisfaction of Engr-in-Charge.

Supply,laying,jointing , testing and commisioning XLPE cable 1100 volts grade PVC insulated armoured & PVC sheathed with stranded aluminium conductor heavy duty ISI marked incl cable glands lugs bolts nuts washers etc to suit the cable size to be laid in trenches fixed along pole, LT pannel floor bore or through GI pipe laid under floors, Fixed, concealed in wall encased in GI pipe etc complete of following sizes including taking down old unserviceable over head conductors and insulators channels carefully as directeed by engineer in charge

25 Sqmm x 4 Core

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all as specified and directed :-

Soft / loose soil

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25 cm all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point of any type of excavation all as specified and directed by Engineer -in-Charge.

M & L for HDPE DWC pipe ISI Marked fixed on walls, ceilings or in floors, trenches etc. for cable protection of the following outer dia :- Make:-Infra/Supreme/Prince

40 mm dia

Supply and installed outdoor main control feeder pillar box cannopy type with IP-55 protection,fabricated with 3.15 mm sheet of size 650mm x 600mm x275mm with 40mm angle iron fram 300 mm from ground leave, suitable for installed arrangement 100/160 Amps MCCB as incommer,out going 63/40 MCCB/ MCB SP&N=04 Nos with copper busbar made with 30mmx6mm copper strip on distribution board having front opening with proper locking arrangement size of the panel 600mm width,650mm hight and 275 mm width, complete all as specified and directed. Note: (a) MCCB/MCB will measure in respective items of schele "A".(b) Rate included the Copper bus bar.

M & L of new Gl steel tube Light grade galvanized of size 80 mm dia with all fitting laid in trenches complete and all as specified and directed by Engr in charge. Make : Jindal/ Tata/ Prakash Surya/ Ravindra./Swastik

Job No : SHQ/DEHU/MINOR/2025-26/03/Q3 Supply and install Hi wall split type AC units indoor/outdoor complete with cordless remote control unit and with in built air ioniser dual invertor type compressor,copper tube condensing unit with CFC free gas for better indoor air quality with minimum 5 star rating of capacity 2TR single phase including additional copper piping, cabling work, insulation between indoor unit to outdoor unit and provision of MS Brackets for resting of outdoor units (where reqd) or making resting platform of outdoor unit by brick works complete all as directed. Make of Split Ac unit : Bluestar/ Carrier/ Voltas/Usha/Daikin/Hitachi.

S & F voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 90 V to 300 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA Make one of the following : V-Guard Model No AD5 bolt 9050/ Vinitec/Sen and Pandit/Microtek.

M&L for sub main wiring 3x4 sqmm ( phase , neutral and earth) PVC insulated (heavy duty) 1100 volts grade, FRLSH, with stranded copper conductor in & including PVC casing caping of suitable size not less than 25mm (3 run of 4 sqmm cable and one run of PVC casing caping will be measured as one unit) all as specified and directed (from distribution board to metal clad switch socket point near AC)

M&L for PVC pipe 20 mm dia heavy duty with all fittings and fixing accesssories such as coupler, lock nut, saddle, pipe hook and laid on floor (for wash out line)

S &F for single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20Amp

M & L for making holes by core cutting machine on stone/concrete / brick walls.Dia of hole not exc.50mm and thickness of wall 50cm to 70cm for entry of suction and discharge pipes of AC and making good distarbed surfaces with cement morted and finally finished with plaster of parise and painted the distrubed surfaces with existing type of paint and tint complete all as directed.

DINESH CONSTRUTION (BID ID -3482654)

M/S B.A. GAIKWAD (BID ID -3480232)

Santhi Enterprises (BID ID -3484291)

DR J S CHADHA AND SONS (BID ID -3484702)