SPECIAL REPAIRS TO MT SHED AND MT STORE (T-5 AND T-6), BLDG NO P-31A AND P-31 B AND CERTAIN MINOR WORKS UNDER GE (W) COLABA, MUMBAI.

Amount

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings/wall cladding including portions bedded in cement mortar complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar patteren roof coverings including use of scafoldings of any height of bldgs complete all as specified and directed.

Material and labour for in repair to replace old decayed timber ( including piecing, scarifying, etc of old and new timber if required) second class hard wood clean sawn in scantlings timber framed and fixed in any position and description including use of scafoldings of any height of bldgs complete all as specified and directed.

M & L for pre-painted roof metal sheet of Trapazoidal / Mangalore tile design profile hot-dip aluminium-zinc alloy metallic coated profile steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick of a colour having yield strength of 550 Mpa as in roof covering/Cladding to wall fixed with self tapping screws as specified including use of necessary scafolding and safety measures at any floor complete all as specified and as directed. Makes:- Tata Steel/JSW colouron +/Treckdeck/CRIL/Essar steel (AM/NS).

-dittoa- as per item No -4 above but palin sheeet

Supply & fixing Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc fixed with self tapping screws including use of scafoldings of any height of bldgs complete all as specified and directed.

S & F hot rolled mild steel medium and high tensile structural steel of grade E 250 quality A conforming to IS 2062: 2011 as in joist, channel, angle, flat iron or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20 mm of the length indicated) complete all as specified and directed.

S & F Rolled mild steel section for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etcks conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Demolition of cement concrete in ground floor n.exc 15cm thickness (below or above ground level) and removing the demolished material and debris out side MoD land complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in flooring/subbase/ plinth protection, including use of necessary shuttering complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site complete all as specified & directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed bese laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish inluding Screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed.

All as per Item No. 13 above but in riser of steps, skirting, dado and pillar laid over cement screed and jointed over & including rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed.

Dismantling of ceiling board (Plup insulation or insulation etc) or insulation board any thickness including cover fillet and grid frame work complete all as specified and directed.

M & L for Powder coated of 50 microne coating aluminium snap grid (Any colour/Pattern)having a size of 605mm x 605mm and sections incorporated in frame work shall conform to IS 733, IS 737 and IS 1285 and snap grid frame work shall be fixed to ceiling with supporting hanger 6mm dia mild steel rod, J bolts with necessary bolts, nuts and washers all as manufacturer instruction, the main & cross tees shall be jointed at junction/crossings with Powder coated of 50 microne coating aluminum angle bracket of size indicated it shall be 19.05mm x 19.05mm x 1.45mm, weighing 0.14 Kg per RM, fixed with suitable mild steel, bolts nuts and washer all as per manufacturers instruction, the snap grid shall be supported at ends all along the wall with Powder coated of 50 micorne coating aluminum angle of size as indicated along if not indicated it shall be 38mm x 25mm x 2.18mm, weighing 0.358 Kg per running meter complete all as specified and directed.

M&L for 8mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous materials reinforced with cellulose fibre for fixing in 605 X 605 mm grids complete all as specified and directed. Note:- Frame work for ceiling shall be measured and paid separately.

M & L for 8/10mm thick PVC ceiling (any colour or pattern, sample as approved by GE) with aluminium framework for receiving ceiling boards, including all aceessoreis for fixing at various levels complete all as specified & directed.

Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc complete all as specified & directed.

M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius, built in CM (1:6) complete all as specified & directed.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc and removing debries out side MoD land complete all as specified & directed.

Material and labour for 15 mm thick cement plaster in CM (1:6) on brick work/ RCC wall and finish the surface fair and even without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar 1:4 using intergral water proofing compound on fair faces of brick work, finished even and smooth (with out using extra cement) complete all as specified and directed. Note: Integral liquid water proofing compound shall be used in per bag of cement as per manufacturers instructions and will be measured & paid separately under respective item as supply only.

Supply only integral waterproofing compound

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) Birla wall care putty complete all as specified & directed.

Materials and labour for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) Birla wall care putty complete all as specified & directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of wheather proof paint of 100% acrylic, exterior grade, over a coat of primer complete all as per manfacturer's instructions complete all as specified and directed.

M&L for preparation of Old plastered surfaces of walls and applying two coats of wheather proof paint of 100% acrylic, exterior grade, over a coat of primer complete all as per manfacturer's instructions complete all as specified and directed.

M&L for preparation of old painted wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down Chowkhats or frames with shutters (without taking down of shutters from the frame) exc 1.50 but n exc. 4.00 Sqm each complete all as specified and directed.

Supply & fix 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed.

Material and labour for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, and treating ends of posts, back of chowkhats, etc. area tarred exc 0.1 sq m but n. exc. 0.5 sq m each and treated with tar or coal tar black paint complete all as specified and directed.

Material and labour for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, treating small articles such as holdfasts,end of posts,backs of chowkhats, etc area n. exc. 0.1 sq m each and treated with tar or coal tar black paint complete all as specified and directed.

Supply & fix 35 mm thick 2nd class hard wood rail and style plain framed panelled shutters (any panel) with lock rail and panel of 9 mm thick B.W.P commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F Aluminum alloy anodised sliding door bolts of 300mm long with hasp & stapple and fixed complete all as specified and directed.

Taking down shutters of any description n exc. 1.00 Sqm complete all as specified and directed.

Supply and fix 30mm thick glazed & skelton, open rebated & prepare to receive glass/gauged etc divided in square with plain, chamferred or rounded mitred edges of framing plain, chamfered or rounded fitted with or without sash bars & metred beads for securing glass gauge etc size of members of shutters as specified in SSR Part-I section 8, clause 8.24(b) supplied & fitting to chowkats using 2nd class hard wood complete all as specified and directed.

S&F 75 mm size butt hinges, medium weight, cold rolled stainless steel complete all as specified and directed.

S&F aluminium anodised 100 mm size barrel tower bolts of extruded section complete all as specified and directed.

S&F aluminium handle 75 mm size cast type anodised complete all as specified and directed.

Supply & fix 3 mm thick sheet glass ordinary quality with oil putty in square n. exc. 0.5m in each pane complete all as specified and directed.

M&L in repair for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden/ Aluminium beadding complete all as specified and directed.

S&F 150mm long gate and shutter aluminum hook and eyes complete all as specified an directed.

S&F aluminium anodised 200 mm size barrel tower bolts of extruded section complete all as specified and directed.

S&F aluminium handle 150 mm size cast type anodised complete all as specified and directed.

S&F 100 mm size butt hinges extruded aluminium alloy with galvanized mild steel hinges, pin anodised type `C'-22 complete all as specified and directed.

Supply & Fixing in repairs vitreous China squatting pan, Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) including taking down existing squating pan complete all as specified and directed. Make : Cat Part No S3010104 of Cera or Equivalent in Hindware / Parryware.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed. Make : Cat Part No B1010106 of Cera or Equivalent in Hindware / Parryware.

S&F in repairs vitreous China wash basin white, flat back, size 580X450 mm including cutting for pinning in ends of brackets, complete complete all as specified and directed. Make : Cat Part No S2040139 of Cera or Equivalent in Hindware / Parryware.

S & F in repairs for vitreous china, bowl urinal flat back, size : 465 x 355 x 265mm white (min) with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 (excluding fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

S&F PVC connection 15mm size PTMT nuts of length 450 mm complete all as specified and directed.

M&L in repairs CP Towel Rail 61 cm long complete all as specified and directed.

M&L in repairs CP soap dish complete all as specified and directed.

S&F in repairs 15 mm bore angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F in repairs 15 mm bore concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed .

S&F in repairs15 mm bore piller taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts all as specified and directed.

Taking up or down steel tubing and connection 15 mm dia bore complete all as specified and directed.

Taking up or down steel tubing and connection 20 mm dia bore complete all as specified and directed.

S & F GI tubing 15mm dia bore, medium grade, with all fittings and fixed to wall and ceiling or laid in floors complete all as specified and directed.

S & F GI tubing 20mm dia bore, medium grade, with all fittings and fixed to wall and ceiling or laid in floors complete all as specified and directed.

S & F GI tubing 25mm dia bore, medium grade, with all fittings and fixed to wall and ceiling or laid in floors complete all as specified and directed.

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n, exc. 10cm girth complete all as specified and directed.

M&L for PVC (SWR) multi floor trap with grating including jointing with solvent cement for diameter of 75 mm outlet complete all as specified and directed.

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls / floor including stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, upto 04 storeys height of bldgs including use of scafolding arrangments complete all as specified and directed.

S&F 75mm dia bore PVC (SWR) bends with access doors any radius complete all as specified and directed.

S&F 75 mm dia bore PVC (SWR) vent cowl complete all as specified and directed.

Demolition and breaking up drain pipes 75 mm dia bore (Salt glazed stoneware, AC, PVC or reinforced concrete) set in cement mortar, upto 04 storeys height of bldgs including all scafloding arrangments complete all as specified and directed.

Demolition and breaking up drain pipes 110 mm dia bore (Salt glazed stoneware, AC, PVC or reinforced concrete) set in cement mortar, upto 04 storeys height of bldgs including all scafloding arrangments complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls/floor including stack clamps out of 50 mm x 5 mm flat iron duly painted and 16 mm dia round iron stays upto 04 storeys height of bldgs including all scafolding arrangments complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends with access doors any radius at any height of bldgs including use of scafolding complete all as specified and directed.

S&F 110 mm dia PVC (SWR) junction single, (single T) equal or unequal provided with access door at any height of bldgs including use of scafolding complete all as specified and directed.

S&F 110 mm dia PVC (SWR) vent cowl at any hieght of bldgs including use of scafolding complete all as specified and directed.

S&F High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 of 38/40mm bore fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

Providing & fixing Greenlam Sturdo KIDDIE WORLD Toilet Cubicle (of following standard dimension which includes 600mm door size width) made of heat, bacteria, water, chemical, scratch, impact anti bacterial resistant 12mm thick solid compact laminate panels tested by Shriram Test House. Finish of the compact laminate should be Suede / *Raw Silk, which includs doors, pilasters & intermediate panels finished with approved texture/shade as per the detail drawings & as per IS 2046 (Indian Standard) and as per fire retardant BS-476/97 standard. The product should have Green Guard Certificate. This also includes providing and fixing in position necessary hardware made out of Stainless steel (Grade 316) as per manufacturer’s specifications & Architects instructions like (1) Door Knob, (2) Gravity Hinges, (3) Thumb turn lockset indicator, (4) Coat hook, (5) U-Channels, (6) SS-Shoe Box Plate (7) MS-Base Plate, (8) Rubber noise deafening tape (9) Screws & wall Plugs. All screws will of 316 Grade in stainless steel with satin finish. All pilasters are supported by MS-Base steel Bottom Cladding with Stainless Steel Shoe Box Plate. The base of the stainless steel shoe box will be anchored to the floor with a clearance height upto 110mm. Fixing of intermediate panels to the wall shall be stainless steel ‘L’ – Bracket or stainless U-Channel section are fixed into wall with screw inserts. Note :-The above items include following things:- (a)Toilet Cubicle with standard dimension of 1500mm Height x 1000mm Width x 1500mm Depth, which includes 600mm door size width). (b) Toilet Cubicle I-Shape (Front Partition) with standard dimension of 1500mm Height x 1000mm Width which includes 600mm door size width). (c ) All aspects specified by the manufactures, Greenlam Sturdo Classique Grandeur Model or equivalent.

M & L for granite stone (of any approved colour / shade) 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing complete all as specified and directed.

Rounding to edges of Granite stone slabs exposed edges, such as in steps, cooking platform and other similar situation complete all as specified and directed.

M&L for Brick work with fly ash modular bricks, of size-600x200x200mm, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified & directed.

M&L for brick work with fly ash modular bricks, of size-600x200x100mm, straight or curved on plan to any radius in half brick thick walls built in in CM 1:6 complete all as specified & directed.

M&L MS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending including necessary welding as required & binding with mild steel wire (annealed) not less than 0.90mm dia or securing with the clips complete all as specified and directed.

All as per item No-82 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders/tempreture bar etc including other works.

M & L for Formwork to sides and soffits of floor and roof beams and lintels etc. rough finished surfaces of concrete complete all as specified and directed.

M & L for RCC 1:2:4 Type B1 (20mm graded stone aggreagate) for beam and lintels / chajjas complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the primises to out side MoD land complete all as specified and directed.

M&L for Ist and premium quality of non skid, joint free, ceramic digital “coloured” matt finish tiles of premium or first quality of size not Exc 0.36 Sqm thickness 6-7mm or thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete complete all as specified and directed.

M&L for Ist and premium quality of Glazed ceramic coloured digital tiles 600 mm x 300 mm or 450 mm x 300 mm x 6 mm to 7 mm thick, in skirting, dados, risers to steps, etc set and jointed in neat cement slurry, and pointed in coloured cement to match tiles, laid over and including 10mm thick rendering or backing layer in cement mortar (1:4) complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern) white,incl. trap, connection to drain and flushing pipe ( excluding flushing cistern) including seat cover for pedstal pan complete. Make : Cera Catalogue No 20062 or Equivalent in Hindware / Parryware.

M&L in repairs of one piece closet with bowl for coupled WC with PP soft seat cover , hinges fixing accessories and accessories set of size 360x680x765mm, strap 220 mm cistern with cistern fittings for 755SS, 755SN and necessary fittings complete all as specified . Make: Jaquar Cat Part No- CNS-WHT-755SS/Kohler/Equivalent approved make.

Supply & Fixing in repairs vitreous squatting Standard Urinal Orissa patteren, size 45x35x10 cm white, with integral footrests (excluding flushing cisteren and flush pipe) including taking down existing squating pan complete all as specified and directed. Make : Cat Part No 60003 of Hindware or Equivalent in Cera / Jaguar.

S&F table top wash basin thin rim of size 600x400x160 mm matt finished wash basin oval design with large bowl area including each and every necessary fitting complete all as specified and directed. Make: Old cat part No 1222SYl Brand Cera SKU S2022103YN or equivalent in Cera / Jaguar.

S&F in repairs wash hand basin table top of size 425x340x175 mm vitrous China including waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed. Make Jaquar cat part No - CNS-WHT-903/Kohler or equivalent in Cera / Jaguar.

S&F in repairs 15 mm bore bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 202 or Equivalent in Jaquar/ Parko.

S&F in repairs 15 mm bore 2-in-1 bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule with wall flange complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 203 or Equivalent in Jaquar/ Parko.

S & F in repairs 15 mm bore, brass chromium plated, fancy type health faucet with SS connection pipe One Metre long complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 232D or Equivalent in Jaquar/ Parko.

S & F in repairs CP toilet paper holder complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No AC 206 or Equivalent in Jaquar/ Parko.

M&L for PCC 1:2:4 type B2 as in hardstanding, plinth protection 75mm thick (using 40mm graded stone aggregate) including necessary expansion joints and filling joints with bitumen complete all as specified and directed.

Dismantling existing PVC water tank of 1000 Litres capacity complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tank 1000 Litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. Note : - Above item include float valve of 20 mm bore and threaded PVC tank cover word after directed

S & F in repairs 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for SS 316 grade stainless tubing (Square/Round/Rectangular) of suitable gauge as in SS guard bars, railings, SS frame works including all fixing arrangments, including taking down of old SS guard railing complete all as specified and directed.

M & L for exterior 30x45 cm hi definition digital ceramic wall tiles in vertical surfaces like pillar of gates not less than 7mm thick set and jointed in neat cement slurry over 10mm thick plastering in CM 1:4 and pointed in white or coloured cement to match, size and colour/shade as directed by Engr-in-Charge.

S & F of 6mm thick Aluminium based high pressure laminate (HPL), any type pattern and shape aluminium thickness of 0.5mm, both side finish of aluminum roll coated with Plain / coloured / wooden texture PE/PVDF, and including frame work using of Fasteners, including concealed screws, nuts, bolts and other items required for connecting aluminium to aluminium/steel/wooden/ply board, Blind rivets all fixing anchors, brackets and similar attachments used in the erections, shall be of aluminium, non-magnetic stainless steel, zinc coated steel, for fixing in both internal / external wall cladding complete weather proofing sealant of a polyurethane elastic joint/ structural silicone sealant/ pre-formed gaskets to the Horizontal & Vertical Joints in the Aluminium cladding/facade as per manufacturer instructions and removal of old sheeting of any thickness complete all as specified and directed. Note : 1. The unit rate quoted in this item deemed to be inclusive of all necessary fixing acceserries mentioned in the description of work and use of scaffolding works at any height for installation. 2. For payment purpose panels areas will be measured on one side only.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 microns) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge. Note : (i) Glass panes will be measured & paid separately . (ii)The unit rate quoted shall deemed tobe inclusive of cost of rubber beading and glazing clips, hinges, handle, but will not be weighed & not paid separately. (iii) All other minor details including cost of locking arrangements shall be included in the unit rate quoted.

S&F 5.5 mm thick, sheet glass, ordinary quality, in any size of pane complete all as specified and directed.

Supplied and fixing Rolled Mild Steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes , framed guard bars, barred iron doors, ladders, windows, balcony in ground floor, framed balusters, walk ways, railings, framework of watertanks and similar work conforming to FE 290 Gde -E-165 complete all as specified and directed.

S&F Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm of approved design and fixed with aluminium windows complete all as specified and directed.

M&L for Anodized Aluminium grill with and including suitable aluminium anodized 25 to 30 micron E/H section frame, 1.5mm thick as required with aluminium riveted/ screwed attachment complete all as specified and directed. Note :- Aluminium grill shall be of Deco grill of M/s ELESAR FOCCHI Ltd. as per design No. DG 102 , 7.5mm size i.e. 6mm thick and 7.5mm wide or approved design in M/s Royal grill / National grill, sample as approved by GE.

M&L for preparation of newly plastered brick/concrete surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 3mm thick (minimum) Biral white wall care putty including rubbing with sand paper through authorised applicator of paint manufactures only of approved shade complete all as specified and directed. Make:-"Tractor Uno" of Asian paint/'JAdoo' of Berger paint/ Nerolac beuty of Nerolac paint/as approved by GE

Excavating in post hole (or similar holes) in Soft/hard/dense soil each n.exc 0.5 cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil to a distance n.exc 50m and making good complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 (using 40mmm graded stone aggregate ) as in foundation and filling mass concrete complete all as specified and directed.

M & L for preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

M & L for preparing surfaces of steel and iron work new of any description and girth at treated area n.exc .5 sqm each and treated with Tar/ Coal tar black paint complete all as specified & directed .

S & F Rolled Mild Steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc. complete all as specified and directed.

Cutting existing steel tubing for alternation or addition ( Each cut measured ) of 20mm dia bore complete all as specified and directed.

Supply & fixing for Rotational Moulded polyethylene water storage tank, white colour, thrible layered, 5000 ltr capacity (Cylindrical vertical hoisted with closed top) hoisted and fixed in position complete all as specified and directed.

Supply & fixing gun metal gate valve with iron wheel head, screwed both ends for iron pipe of bore dia 25 mm, complete all as specified and directed.

Supply & fixing 25mm dia bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball scrwed for iron pipe and fixed complete all as specified and directed.

S&F Sub main wiring, with Four run of 06 sqmm stranded copper conductor FRLS wire with two run of 06 sqmm stranded copper conductor as earth continuty conductor connected to common earth dolly including PVC FR heavy duty conduite of adequate size (not less than 25 mm dia bore) for housing the wires from TPN DB to TPN DB Including taking down old U/s Submain wiring complete all as specified. Note: 1.Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. 2.Mode of measurement Four runs of 06 sqmm cable and Two run of 06 sqmm cable as earth wire with PVC conduite shall be measured as one length.

S&F Sub main wiring, with two run of 06 sqmm stranded copper conductor FRLS wire with one run of 06 sqmm stranded copper conductor as earth continuty conductor connected to common earth dolly including PVC FR heavy duty conduite of adequate size (not less than 25 mm dia bore) for housing the wires from Main DB TO SPN DB including taking down old u/s Submain wiring complete all as specified and directed. Note: 1.Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. 2. Mode of measurement two runs of 06 sqmm cable and one run of 06 sqmm cable with PVC conduite shall be measured as one length.

Material & Labour for Point wiring with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing caping (ISI mark) of adequate size with all fittings and accessories including with and fix concealed 1.2 mm thick pressed steel sunken box , suitable for fixing moduler switch/socket of different modules and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I complete for one light point / Exhaust Fan / wall fan controlled by one modular switch 5 Amps complete all as specified and directed. Make of Cable : Anchor / Havells / Finolex / Polycab

All as per serial no.123 here-in- before but for One ceiling fan controlled by one switch & regulator.

All as per serial no.123 here-in-before but for One 3 pin socket point 5 Amps on independent board.

All as per serial no.123 here-in-before but for One 3 pin socket point 5 Amps on same board.

All as per serial item no 123 here-in-before but for one socket point 15 Amp with 2.5 sq mm PVC unseathed FRLS wire along with 2.5 sqmm green colour wire as earth contuinity conductor connected to common earth dolly complete all as specified & directed.

S&F Switch piano, flush type single pole, one way 5 Amp , complete all as specified and directed.

S&F socket 2/3 pin 5 Amp complete all as specified and directed.

S&F switch socket combination 5 in 1, 5A/16 Amp flush type with fuse and neon indicator complete all as specified and directed.

S&F stepped type electronic fan regulator 450 watt flush type on the existing phenolic laminated sheet etc. complete all as specified and directed.

Supply & Fix ceiling rose surface bakelite 65 x 50 mm two to three terminals complete all as specified and as directed.

M & L for flame proof point wiring in repair on wall and surface wiring on ceiling/ roof with necessary fixing arrangements for one light point controlled by one switch with stranded PVC-ZHLS insulated and unsheathed copper stranded conductor of size 1.5 sqmm 1100 volts grade drawn in and including all connected accessories ERW rigid steel conduit (mettalic) not less than 20 mm dia with all MS conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including PVC-ZHLS insulated and unsheated copper stranded conductor of size 1.5 sqmm, 1100 volts grade for continous earthing and complete all as specified and directed. Note : The unit rate quoted shall deemed to be inclusive of Junction box flame proof, bends, Tee, elbow flexible metalic conduite and ERW rigid steel conduit ( Mettalic) included in unit rate quoted.

S & F Flame proof rotary type with termination box in LM6, 16A, single pole 250V and enclosed cast aluminium body with threaded cover with switch operated by a single pole knob with double entries suitable for 20mm dia ERW threaded steel conduite of approved make complete all as specified and directed.

S & F LED light fitting 2 X 16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and Fix 20 watt LED in repair, 4 feet long, with extruded aluminium housing and robust construction LED lighting fixture with high lumen output, environmental friendly, energy efficient ready to use pack fixed on pvc square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed. Make : Wipro, Model No Wipro Garnet 20W Aluminium LED batten light 6500K, D552065 / Havells, Model No Higher Wattage 22W LED 6500K / Philips, Model No BS150W LED 20S-6500 PSE OD GR / OSRAM.

S & F 40 Watt Well glass/ Highbay lighting IP 65 Environmental friendly, energy saving long life corrosion resistant, vertical/ horizontal surface mounting pressure die-cast aluminium well glass luminaires with high power LED as light source and elctrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing and including hanging arrangement complete all as specified and directed. Make : Havells Catpat No : ENDURAWELLGLASSNEOTSS40WLED757SPCS or equivalent in Wipro/Philips.

S & F LED Flood light fitting of capacity 100 Watt luminaire fixture in IP 66 protection level output of LED efficiency 100 lumen per watt after all losses, driver with 4 KV surge high and low voltage protection including suitable bracket for fixing to Wall/ Pole with complete with two Nos of GI clamp including connected accessories, nuts, bolts, washers etc. complete all as directed by Engineer-in-Charge. Make : Havells/ Philips/wipro.

S&F DB vertical type in repair, 4 way TPN double door load line powder coated complete alongwith 200 Amp rated Bus bar fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB.

Supply and fix MCB SP, in repairs, 240 volt, 6 to 40 Amps complete all as specified and directed.

Supply and fix MCB SPN, in repairs, 240 volt, 40 Amps complete all as specified and directed.

Supply and fix sheet metal enclosures, double door, for DBs when MCBs to be used 240 volts 4 way with 200 Amps rated bus bar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed.

S&F MCB TPN in repairs 415 volts, 80 Amps, fixed on TPN DB board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB.

S&F MCB TPN in repairs 415 volts, 40 Amps, fixed on TPN DB board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB.

S&F 40 Amp Isolator TP, 415 Volts, fixed on four pole MCB DB in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB.

S & F in repair powder coated steel sheet MCB enclosure with Din rail suitable for fixing 4 pole MCB complete all as specified and directed.

Material & labour for earthing, complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to using galvanised iron strip 32×6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron. Earth strip protected by GI pipe of size 40mm bore (medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia bore GI pipe, medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as specified and directed.

Mayur Enterprises

GANGAJAL

Bidder Name

S S ENTERPRISES

Mayur Enterprises

GANGAJAL