REPAIR/REPLACEMENT OF LT CABLE AND EXTERNAL ELECTRIC SUPPLY WIITH OTHER CONNECTED ITEMS AT MALAD, KANDIVLI AND MARVE AREA UNDER GE (N) MUMBAI

Supply, install, testing & commissioning pedestal cubical type double door LT bus bar chamber box factory made modular construction fabricated out of 3 mm thick CRCA sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all Aluminium bus bar strips (50mm x 10mm x 04 Nos) fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on PCC (1:3:6) type C-2 bed block with studs, bolts, nuts & washers, Danger notice board with scull suitable for 415 volts or required size to be fixed on Pannel including dismantling of old Bus bar panel all as specified and directed by Engr-in Charge. Notes:-(a) Aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for Phases and neutral - 01 set (b) Digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable CT of appropriate ratio.-01 No Make-L&T / Automatic Electrical (AE)/ Havells/ Enercon/ Secure Meter (c) Panel indicating lamp neon/LED type (Red ,Yellow & Blue) with lamp holders - 03 Nos (d) Panel instrumental wiring with FRLS suitable size but not less than 2.5 sqmm copper wire single core - 01 Job (e) Necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor. (e) Panel shall be Manufactured from CPRI approved manufacturer and Drawing for panel shall be first approval by Engr-in-Charge

Supply and erect 6 meter long hot dipped galvanised OCTAGONAL street light pole with one single light bracket for street light, the bottom of Pole shall be 130mm dia and top shall be 70mm dia with 3mm thickness, high tensile strength confirming to BS EN 10025. Base plate shall be 220x220x12mm with 4 Nos of anchor bolt 'J' type 700mm long 20mm dia with nut, washer and bolt shall be inserted to RCC footing with internal in built Junction box including 3 phase busbar and one 6 Amp MCB complete including necessary earth work excavation in hard/dense soil, PCC 1:4:8 for foundation, RCC M-20 concrete footing with reinforcement, formwork etc complete all as per mafucturer's instructions and as directed by Engineer-in-Charge. Note: (i) The unit quoted rate shall deem to be included for earth work excavation in hard/dense soil, PCC 1:4:8 for foundation, RCC M-20 concrete footing with reinforcement & formwork. Make of Pole- Bajaj/ Utkarsha India/ Bombay Tubes & Pole Co. Make of MCB :Legrand / L&T / Havells/Benlo

Supply and fix in repairs MCCBs 400 Amps, 36 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings with extended copper terminals complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)/Benlo or as per model and make available at site

Supply and fix in repairs MCCBs 160 Amps, 36 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings with extended copper terminals complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)/Benlo or as per model and make available at site

Supply and fix in repairs MCCBs 100 Amps, 16 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings with extended copper terminals complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)/Benlo or as per model and make available at site

Supply & Fix 8.50 metres long Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified ,type 410 SP-22 along with brackets for fixing LED street light including dismantling and taking down existing damaged/broken PCC Pole Complete all as specified and directed by engineer In Charge. Note : Necessary PCC concrete and earth work will be measured and paid seperately. Make: India Tube and Co / India Electric Poles Mfg Co,Maharashtra / Bombay Tubes / Kalinga Tubes / Singh Profile, Pune

Supply and fix in repairs MCCBs 250 Amps, 36 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings with extended copper terminals complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)/Benlo or as per model and make available at site

Supplying, laying,connecting, testing & commissioning LT UG XLPE insulated, heavy duty, 1100 V grade electric cable with aluminium conductor, served with an inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed of size 16 Sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by Engineer-in-Charge of following sizes:- Note : Earthwork excavation, DWC/GI pipe for cable protection shall be measured and paid separately in their respective items Make: Cable Corporation of India (CCI)/ Asian Cable Co, Chattisgarh/ Finolex/ Polycab/ Gloster/Universal/ RPG Cables Ltd , Thane/ Havells India Ltd/ RR Kabel/ KEI Industries Ltd(KEI)

-do- same as Item no. 8 above but of size 16 Sqmm 2 Core

-do- same as Item no. 8 above but of size 25 Sqmm 4 Core