REPAIR TO DRAIN, MANHOLES, FOOTPATH, BRICK WALL, FENCING ETC AT

Amount

Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and directed.

Taking down cement of any description including racking out joints, hacking for key, scrubbing down with water etc and prepare to receive new plaster complete all as specified and directed.

Excavation in trenches in soft /loose soil not exceeding 1.5m wide and n.exc 1.5 metre in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier hole etc. n.exc 10 Sqm on plan and getting out, complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm, complete all as specified and directed.

Removal of excavated material to distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, Arches etc and removal of debrishes from site complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radious, built in cement mortar (1:6) complete all as specified and directed.

All as per item No. 7 above but except bricks (Bricks shall be obtained from demolition. Rates for segregation of old bricks, stacking, cleaning etc. shall be included in this item.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radious, built in cement mortar (1:4) complete all as specified and directed.

M&L for Rendering 15mm thick in Cement Mortar (1:6) on fair faces of brick work or concrete surfaces, finished fair and even without using extra cement complete all as specified & directed.

M&L for Rendering 15mm thick in Cement Mortar (1:4) on fair faces of brick work or concrete surfaces, finished fair and even without using extra cement complete all as specified & directed.

M&L for Keyed pointing in cement mortar (1:4) to brick wall of drains complete all as specified and directed.(In repair)

M&L for PCC (1:4:8) type D-2(using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in surface channel and drain finished surface even & fair complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete with using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Add or deduct from item No. 15 for each 25mm girth or part thereof over or under 30cm inner girth

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in beching and coping, bed block lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Dismantling of mild steel or structural steel work including doors, gates, but excluding framed truss and dismantling of CI work and removing complete all as specified and directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shoulders or reveted, forged into spikes, framed guard bars, railings, ladders and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.

All as per item No. 19 above, but for fixing only

M&L for RCC M-25 (Design mix) as in slabs supported on wall, beams, column in floors, roofs, slab for culvert/deck slab etc and the like complete all as specified and directed.

M&L for Form work to sides and soffits of concrete slab n. exc 200mm thick, rough finished surfaces, flat complete all as specified and directed.

M&L for TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or pointed.

M&L for Machine pressed precast concrete coloured rubber moulded glossy finish paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade laid over 30mm thick sand cushion etc complete all as specified and directed. (Sand cushoin shall be measured separately)

All as per item No 25 above, but for fixing only

M&L for Machine pressed precast concrete coloured rubber moulded glossy finish paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade laid over 30mm thick sand cushion etc complete all as specified and directed. (Sand cushoin shall be measured separately)

M&L for sand cushion below inter locking paving tiles including spreading, levelling and compaction complete all as specified.

M&L for 20-25mm thick machine pressed precast concrete pre-polished rubber moulded coloured tiles, heavy duty antiscratched of size exc 0.09 and not exc 0.18, over 15mm thick screed bed in cement mortar (1:6) including jointing with neat cement slurry mixing pigment to match the colour including dismantling of tiles with screedbed complete all as specified and directed. Design, shape & size will be approved by the GE Make : NTC/Ultra/JAIN tile industries.

S&F pre-cast Kerb stone of size 300x450x100mm with PCC (1:2:4) (using 20mm graded crushed stone aggregate) including champherd, rounded etc. complete all as specified and directed. Make : NTC/Ultra/JAIN tile industries.

M&L for preparation of new concrete/brick/stone or plastered surface of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for Preparing new plastered wall surfaces and applying Two coats of cement base paint on wall surfaces over one coat of primer complete all as specified and directed.

M&L for Preparing, plastered or unplastered of old plastered surfaces of walls and applying one coats of cement base paint etc complete all as specified.

De-silting and cleaning of existing rain water drain and removing the earth / sand / silt and shrub and other materials etc complete to a distance exc. 250 m but n. exc 500 mtr and depositing where directed at a level n. exc. 1.5 m above the starting paint complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground

S&F for mild steel work as in posts or struts in fencing including cutting tops to shape as directed ,drilling holes, notching for wire etc flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

All as per item No. 36 above, but for fixing only

M&L for two coats of synthetic enamel paint on new steel surfaces of any description over a coat of red oxide primer including preparation of steel surface complete all as specified and directed.

M&L for preparation of old steel surfacses of any description and applying one coats of synthetic enamel paint etc complete all as specified and directed.

S&F in repair for galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining fixing to any type of strandard rail straining bolts,including securing or tying at crossing with provision of galvanised mild steel wire, staples or steel pins etc as directed (each line wire to be measured)

All as per item No. 40 above, but for fixing only

S&F in repair concertina coil 600mm dia (in stretched position) hot dip galvanized steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dovetail clips (18 SWG) fixed over and including razaor wire, medium barb, hot dip galvanized steel wire razor wire with angle iron. The concertina coil to be fixed with razor wire at points wherever coil touches bottom of razor wire with the help of hog rings (14 SWG) including all fittings like fasteener clips,steel lug rings etc complete all as specified and directed. Note- (i) Stretch length of each coil shall be 6 mtr complete all as specified and directed.

Supply only chain link mild steel galvanized fencing of mesh size 50mmx50mm and not less than 3mm dia hot dipped GI wire fixed and binding with GI wire complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

Taking down soil, waste and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks, bends etc.

S & F in repair 110 mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including MS clamps complete all as specified and directed.

Supply and fixing 110mm PVC (SWR) bends of any radius complete all as specified and directed

S&F for 110mm dia (SWR) junction single, (Single T) equal or unequal®

S&F vitreous china squatting pan Orissa Pattern size 580x440mm white with integal foot rest (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete including trap, set with cement concrete complete all as specified and directed.

S&F in replacement vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) including making good the floor with adjacent floor finishing and making connection to flush pipe etc complete including making functional and removal rubbish/waste materials to a distance n.exc 50m etc complete all as specified and directed.

Material and labour for low level cistern of 10 ltr cap PVC dual flush, symphonic action type , with inlet ball valve and float and handle 32 mm dia including bracket after fixing tiles etc including taking down existing complete all as specified and directed. MAKE : PARYAG, HINDWARE AND CERA

Supply and fixing 15mm dia PVC connection of length 450mm fixed as in repair including taking out the existing unserviceable complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding , removing serviceable tiles to stack and rubbish off the premises for minor repair to floor tiles/ nahani traps and repair to concealed stop cock and GI tubing in wall etc in patches.

M&L for Non Skid ceramic tiles coloured 300mmx300mmx 7 to 8 mm thick(square/ rectagular) area of each in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including and over 15mm thick screed bed layer in CM (1:6) for lying floor finish etc (1st quality/Premium Quality)

M&L for Glazed ceramic tiles in vertical surface 450x 350x7 mm thick joint less tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and inclduing and over 10mm thick rendering in CM (1:4) complete etc. (1st quality/Premium Quality).

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items of this schedule. The same shall be recovered from various payment to contractor before handing over old material.

Abhinav Builders

M/S SWASTIK BUILDERS

chauhan construction

M/S R S Traders

Bharat Trading Company

Mohit Enterprises

M/S V K MEHROTRA

M/S SATISH KUMAR