Repair and maintenance of residential buildings Civil work

Amount

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : including entire carriage of material in all leads and lifts.

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm,( mosquito /fly proof) for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Second class teak wood

Supplying aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : including entire carriage of materials upto all leads, lifts and heights.

250X16mm (two hundred fifty into sixteen millimeters) size

200X16mm (two hundred into sixteen millimeters) size

Supplying aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : including entire carriage of materials up to all leads and lifts as per BIS specification.

200X10 mm (two hundred fifty into ten millimeters)

150X10 mm (One hundred fifty into ten millimeters)

300x10 mm (three hundred into ten millimeters)

Supplying aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : complete including entire carriage of materials up to all leads and lifts as per BIS specification.

125 mm (one hundred twenty five millimeters)

100 mm (one hundred millimeters)

Supplying aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. including entire carriage of material in all leads and lifts as per BIS specification.

Providing and fixing bright finished brass helical door spring (superior quality).

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete. including entire carriage of materials up to all heights, leads, lifts and cost of all other incidentals.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre including entire carriage of materials up to all heights, leads, lifts and cost of all other incidentals.

Painting one coat on old work with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour including entire carriage of materials upto all leads, lifts, heights and cost of all other incidentals.

Distempering one or more additional coats with oil bound washable distemper of approved brand and manufacture to give an even shade : on decorated wall surface/ceiling sloppy roofs in all heights to give an even shade after thoroughly brushing the surface to remove all dirt, dust loose pieces of scales and also preparing the surface even and sand papered smooth including entire carriage of material up to all leads and lifts.

Providing & fixing vitreous china wash basin flat back size 550x450mm Hindware/CERA make of standard quality with single hole for pillar tap including cutting holes in walls and making good the same but excluding fittings and including entire carriage of materials upto all leads, lifts and heights

Supplying 32mm dia chromium plated brass waste (heavy duty) of CERA/Hindwear/Jaquar/ Parryware make for wash basin / sink/urnil including entire carriage of materials upto all leads, lifts and heights

Supplying 32mm PVC waste pipes (heavy duty) for wash basin or sink including brass check nut and including entire carriage of materials upto all leads, lifts and heights

Supplying P.V.C. low level (Cera-Ciena Premium Cistern 2602-P) flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete 10 litre capacity - White

Supplying PVC cistern Float Valve (Heavy Duty) 15mm dia of CERA/Hindware make including entire carriage of materials upto all leads, lifts and heights.

15 mm nominal size.

Supplying & fixing CGI Sheel cover with (18 Gage)PVC frame for water storage tank.

1000 Ltr capacity

2000 ltrs capacity

Supplying CP grating of 100 mm dia (heavy duty) of CERA/Hindware make of approved quality for floor trap.

Supplying vitreous China W.C closet of Cera/ Hindware

Ordinary Closet (European Type) of Cera (Camelia)/ Hindware (size 530x385x390mm)

Orrisa Pan of Cera (2071) / Hindware (size 580x540mm)

Supplying 15mm nominal bore of different lengths PVC connection pipe (heavy duty) of Cera/Jaquar make with brass unions including entire carriage of materials upto all leads and lifts.

Supplying 15 mm brass tap heavy duty with threaded nozzle i/c entire carriage of materials upto all leads and lifts.

Providing & fixing 15 mm dia CP brass stop cock (heavy duty) Quarter Turn of Jaquar or its equivalent in CERA /Hindwear/Parryware make including entire carriage of materials and all leads and lifts.

Supplying 15mm CP brass bib tap (heavy duty) Quarter Turn of Jaquar or its equivalent in CERA /Hindwear/Parryware make including entire carriage of materials in all leads and lifts.

Long Nose

Short Nose

Supplying 15 mm dia CP brass angle cock Quarter Turn of Jaquar or its equivalent in CERA /Hindwear/Parryware make including entire carriage of materials and all leads and lifts.

Supplying 15mm dia chromium plated brass pillar tap (heavy duty) Quarter Turn of Jaquar or its equivalent in CERA /Hindwear/Parryware make including entire carriage of materials and all leads and lifts.

Providing and fixing 600mmX450mm beveled edge mirror of superior glass mounted on 6 mm thick AC sheet and fixing to nylon plugs with steel screws and washers complete including entire carriage of material in all leads and lifts

Providing and fixing 19mm thick anchor/kitply/durotuff commercial board (interior grade) vertical dividers, lining shelves in cupboard storage spaces including/cross 2nd class deodar wood runners of 25x25mm size and lipping on front face of shelves and dividers of size 19x19mm as per direction of Engineer-in-charge including entire carriage of materials in all leads and lifts.

Supplying Glass putty including entire carriage of materials in all leads and lifts.

Supplying Tap washers including entire carriage of materials in all leads and lifts.

Supplying Connection pipe washers including entire carriage of materials in all leads and lifts.

Supplying Cistern washer including entire carriage of materials in all leads and lifts.

Supplying M-seal (60 gm) including entire carriage of materials in all leads and lifts.

Supplying Silicon Gel with Gum including entire carriage of materials in all leads and lifts.

Goodrej Almirah Handle including entire carriage of materials in all leads and lifts.

Goodrej Almirah Locker Lock including entire carriage of materials in all leads and lifts.

Supplying glass pan 5mm thick plain / frosted / coloured of Saint Govin or equivalent make.including entire carriage material upto all leads and lifts.

Dismantling of tile/marble floors laid in mortar upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials with in 20 meters lead (wooden concrete joists to be measured and paid for separately). For thickness of tiles above 25mm and upto 40mm) including entire carriage material upto all leads and lifts.

Providing and laying Ceramic rectified Glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc, complete. including entire carriage material upto all leads and lifts.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make,in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including entire carriage material upto all leads and lifts.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubularsections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge. (Glazing, panelingand dash fasteners to be paid for separately) :

For fixed portion

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Welding by gas or electric plant including transportation of plant at site etc. complete.including entire carriage of materials up to all leads and lifts.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (12.1.3) 0.63 mm thick with zinc coating not less than 275 gm/ m²

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 Coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix :1:4 (1 cement: 4 coarse sand) up to all heights i/c centering and shuttering/scaffolding.

Demolition RCC work and stacking of serviceable materials and disposal of unserviceable materials including cutting the necessary reinforcement and separating from RCC work as per direction of Engineer-in-charge including entire carriage of materials in all leads, lifts and heights.

Demolition of brick work above G.L. at any floor including stacking of serviceable materials in NIT store and disposal of un-serviceable materials within all leads and lifts. In cement mortar

Providing and fixing G.I. Pipes (medium grade) of Jindal Make complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall.

15 mm dia nominal bore

20 mm nominal bore

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete

Providing and fixing stainless steel sink (Diamond make)Jaquar/ CZAR/ Paryware make with Single hole of size 600x450mm size including fixing on RCC shelves complete i/c CP waste and vrackets and entire carriage of materials upto all leads and lifts.

Supplying brass wheel valve (heavy duty) as per BIS specification with wheel including entire carriage of materials upto all leads, lifts and cost of all other incidentals.

15mm nominal size.

20mm nominal size.

Supplying syphen kit for PVC Flushing cistern including entire carriage of materials upto all leads, lifts and cost of all other incidentals.

Supplying CP Brass connection pipe 60cm long of best quality of geyser including entire carriage of materials upto all leads, lifts and cost of all other incidentals.

Supplying GI union (Heavy Duty) UNIK make or equivalent including entire carriage of materials upto all leads, lifts and cost of all other incidentals.

15 mm nominal dia

20 mm nominal dia

Supplying GI Nipple all size (Heavy Duty) UNIK make or equivalent including entire carriage of materials upto all leads, lifts and cost of all other incidentals.

15 x 50 mm nominal dia

Supplying GI Elevo (Heavy Duty) UNIK make or equivalent including entire carriage of material in all leads and lifts.

15 mm nominal dia

20 mm nominal dia

Supplying GI socket (Heavy Duty) UNIK make or equivalent including entire carriage of materials upto all leads, lifts and cost of all other incidentals.

15 mm nominal dia

20 mm nominal dia

Supplying GI Tee (Heavy Duty) UNIK make or equivalent including entire carriage of materials upto all leads, lifts and cost of all other incidentals.

15 mm nominal dia

20 mm nominal dia

Supplying GI Reducer (Heavy Duty) UNIK make or equivalent including entire carriage of materials upto all leads, lifts and cost of all other incidentals.

15 mm nominal dia

20 mm nominal dia

Supplying Brass float valve (Heavy Duty) UNIK make or equivalent including entire carriage of materials upto all leads, lifts and cost of all other incidentals.

15 mm nominal dia

Supplying of PVC handle for cistern including entire carriage of materials upto all leads, lifts and cost of all other incidentals.

Supplying of Dye ratchered set ( DEWALT or Equivalent make) for threading from 15 to 40 mm pipes including entire carriage of materials upto all leads, lifts and cost of all other incidentals.

Providing of 150 mm aluminium Hooks and Eyes, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade Powder coated aluminium (minimum thickness of powder coating 50 micron) with necessary screws etc. complete.including entire carriage of materials upto all leads, lifts and cost of all other incidentals.

Supplying spindle for CP brass taps of(HD) 4 Nos & 5Nos Cera / Hindware /Parryware make of approved quality including entire carriage of materials upto all leads, lifts and cost of all other incidentals.

Supplying plastic seat cover (Solid Type) of Cera / Hindware /Parryware make) for European type universal closets with CP brass hinges & rubber buffers i/c entire carriage of material in all leads & lifts

Supplying 32mm dia CP long bend of approved quality including entire carriage of materials upto all leads, lifts and cost of all other incidentals.

Supplying CP Brass soap dish of Jaquar / parryware / Cera make including entire carriage of materials upto all leads, lifts and cost of all other incidentals.

Supplying GI wire mesh including entire carriage of materials upto all leads, lifts and cost of all other incidentals.

Supplying drill bit including entire carriage of materials upto all leads, lifts and cost of all other incidentals.

Concrete bit 6 mm

Concrete bit 8 mm

Aluminum bit 1.5mm

Supplying Cutter blades including entire carriage of materials upto all leads, lifts and cost of all other incidentals.

Marble cutter

Steel cutter

Wood cutter

Providing and fixing 4 mm thick bakalite tile/sheet of approved shade and colour by the Engineer-in-Charge in Aluminium shutter with aluminium beading and rubber/ gasket complete .including entire carriage of materials upto all leads, lifts and cost of all other incidentals.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper including entire carriage of materials upto all leads, lifts and cost of all other incidentals.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick including entire carriage of materials upto all leads, lifts and cost of all other incidentals.

Refixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.including entire carriage of materials upto all leads, lifts and cost of all other incidentals.

Supplying of 3mm thick teak ply of approved shade and colour i/c entir carriage of material in all leads and lift.

Supplying powder coated curtain rod 25 mm dia including cost of all other incidentals.

Supplying powder coated clamps including cost of all other incidentals.

Supplying powder coated knobs including cost of all other incidentals.

Providing and fixing Towel Rail 600mm long Jaquar-ACN 1111 NM/ Cera -CA-603 including cost of all other incidentals.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes including entire carriage of materials upto all leads, lifts and cost of all other incidentals.

75 mm diameter

110 mm diameter

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : including entire carriage of materials upto all leads, lifts and cost of all other incidentals.

For 75 mm dia pipe

For 100 mm dia pipe

Supplying polyethelene Syntex/ Polyindia/ Diplast water storage tanks of three layers manufactured from food grade Polythene confirming to latest ISIspecification i/c all fittings ie G I Tank Nipple GI Union of 15/20 mm dia. The tank shall be cylindrical shape with a flat base and having a man hole with lockage cover on top including all leads and lifts at site of work including GST.

1000 Liters net capacity

Himachal Techno Engineers

RITESH SOOD