REPAIR TO BARBED WIRE, FENCING, DRAINAGE SYSTEM BOUNDARY WALL, SWT AND CONNECTED WORK AT X, L, TP AND MES AREA AFS DIGARU.

Amount

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness(Below or above ground level) un-reinforced complete all as specified and directed.

Supply only Liquid water proofing compound.

Demolition of RCC of any description and any position not othervise provided for

M&L for RCC type B1 1:2: 4 (20 mm graded agg) in pre cast posts, fencing posts, straining or terminals posts, struts etc for fencing average sectional area n.exc 250 Sqcm with or without chamfered angles and flat splayed rounded or mitered tops as directed and fixed.

M&L TMT bars 10 mm dia and over cut to length bend to shape required, including cranking, bending spirally for hoping for columns hooking ends and binding with MS steel wire (annealed) not less than 0.90 mm dia.

M/L mild steel TMT bars 8mm dia cut to length bent to shape required and binding with ms wire anealed not less than 0.9mm dia, complete all as spacified and directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground.

S/F MS steel post struts fencing post including cutting top to shape,drilling holes notching for wire etc including all necessary drilling bolting complete.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on newly untreated surfaces of steel over 10cm in width or girth not otherwise described.

Dismantling old GI barbed wire of any specifications from the existing posts

S&F galvanized two stranded steel barbed wire 2.24 mm dia barbed with 2mm dia berb at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanized mild steel wire, staple or steel pins etc as directed (each line wire to be measured) as in repairs

M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in coping

Demolition of brick work in cement mortar incl all quions, arches,pillers etc, but excluding ashlar facing, dressed stone work and precast concrete articles.

M&L brick work with sub class b bricks strait or curved on plan exc 6 M mean radius built in CM 1:4 comp all as specified.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standrad , rails, straining bolts, etc. including provision of binding wire.

Supply only chain link MS galvanised fencing of any size or type.

Dismantling wrought iron MS work of any description not otherwise provided for.

S&F joist, channel, angle, or tee sections, fixed indepndently, without connecting plates, etc. (cut to ordinary length i.e., within 20 mm of the length indicated) conforming to Fe-410 (grade-E-250) Quality A.

S&F hand rails, half round or other section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riviting, etc., and similar work conforming to FE 290 gde E-165

S&F Welded steel wire febric weight per square metre N. exc 4 Kg complete to wood or steel members

Cleaning of SWT from bottom by De-watering by submerssible pump and taking out solid sludge to be disposited at low laying area, white washing to complete internal walls and floor of tank. All as specified and directed and upto the satisfaction of Engr-in Charge.

M&L 40 mm thk cement concrete type B1, 1:2:4 (20mm graded aggregate) finished even and smooth using extra cement with water proofing compound.

M&L 100 mm thk PCC 1:2:4 Type B1 using 20mm graded aggregate as in hardstanding path complete all as specified and directed.

M&L keyed pointing to brick wall in CM 1:3 complete all as specified and directed.

M&L for mixture of sand and saw dust filling in ratio 1:2 staking in proper stack for measurement and spreading and levelling in layers n.exc 25 cm thick. Spreading the earth 10 mtr high from the starting point on firing range all as directed by Engr in charge . .

M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in fixing of steel posts in walls.

Dismantling asbestos cement (corrugated,semi corrugated) sheets in roof covering.

M&L for 6mm thick asbestos cement corrugated sheet or semi corrugated sheets in roof covering fixed with L type or J type or Cranked bolt.

M&L for asbestos cement serrated ridge for corrugated sheet fixed with L type or J type or cranked bolt.

FRIENDS ENTERPRISE

M/S B.H. ENTERPRISE

Ms N D Enterpise

M/s Rawat Enterprises

R.K Engineering Assemble

M/S. SUBHAS CONSTRUCTION CO.

M/s Ravi Enterprise