EDUCATION DEVELOPMENT 2022-23 AND 2023-24

Amount

Earth work excavation and depositing on bank with initial lead of 10 meters and initial lift of 2 meters in hard stiff clay, stiff block cotton hard red earth, murrains, gravel stoney earth and earth mixed with small size boulders and hard gravel soil etc., complete as per standard specification

Plain Cement concrete 1:4:8 mix using 40mm HBG metal for foundation and flooring including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc., complete as per standard specification

Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc. Centering for soffits of RCC slabs plain surface including strutting upto 3 meter height using mild steel sheet of size 90cmx60cmx10 gauge with MS angles of size 25mmx2mmx3mm laid over silver oak (CW) joists of size 10cmx6cm spaced upto 90cm c/c and supported casurina props or 10cm to 13cm dia spaced at 0.750cm c/c complying withstandard specification A) Footing, side wall & Grade Beam

B)For Coloumn

C) For Roof

Supplying and fabrication placing in postion of M.S. (or) RTS rods for required size and length as directed by the departmental officers approved design including bending cutting tying and cost of binding wire cost and conveyance of all materials to site etc., complete as per standard specification

Reinforced cement concrete 1:1/2:3 mix using 20mm ISS metal from the approved quarry including mixing, laying, consolidating, curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Collection, supply and filling with well gravel including cost and conveyance of all materials and stacking them at road side to departmental gauge for pre-measurement including all labour charges for filling etc., complete as per standard specification.

Brick work in cement mortar 1:5 mix using using best quality of country bricks of size 22cmx11cmx7cm) for foundation including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Plastering with cement mortar 1:3 mix to 10mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Plastering with cement mortar 1:3 mix to 20mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Plastering with cement mortar 1:5 mix to 12mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Laying with new C.C. Laminated tiles (Like Dora tiles Eurocon tiles etc),(anti skid) of 20mm thick of approved spl quality and set in Cement Mortar 1:3 (1 of cement and 3 of M-sand ) 20mm. Thick using river sand and pointing with colour cement using at the rate of 0.40 kg/M2 and mixing with colour pigment at the rate of 0.3 Kg/M2 including finishing complete with Standard Specification and as directed by the Departmental Officers etc.,

Dadooring Wall glazed Tiles of 20cmx20cmx6cm of approved make and quality and colour set in cement mortar 1:2 mix and pointing with white cement heatly as dieced including cost and conveyance of all materials to site and all labour charges. etc. complete.

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm

Providing UPVC (Un-Plasticized Polyvinyl Chloride)Door:Providing and fixing casement doors fabricated from unplasticized polyvinyl chloride (uPVC) sections. rofiles:The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. are: All the hardware like friction stays, handles should be screwed with self tapping rews. The handles, locks should be designed so that they cannot be leased from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The w should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Supply and fixing of RCC Jolly of Size 0.60 x 0.45 m inclduing cost and conveyance of all materials to site and all other labour charges etc., complete as per stanard specification

Supply and fixing of MS Grill Gate for Entrance including cost and conveyance of all materials to site and all other labour charges etc., to complete as per std., specification.

Supply and fixing in position of indian make colour water closet of size 58 cm (23inches) oriissa pan type with P or S trap and with sand cushion and etc., complete with necessary connection including cost and conveyance of all materials to site and all labour charges etc., complete as per statard specification

Supplying and fixing inposition of indian make white glazed earthen ware flat back urinal of approved quality including dismanting masony if necessary and rodoing the same to original condition etc complete as directed by the de part of mental officers

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings...

Manufacturing, Supplying and fixing GI pipe handrails for Differently Abled persons using 50mm dia GI pipe double handrail at a height of 800mm and 900mm from floor level with 25mm thick MS square rods as balusters embedded in the concrete and welded with pipe at 60cm centre to centre as shown in CA Job No. 9123 / 1 including cutting, welding, bending and fixing charges and applying one coat of red oxide primer for MS members as directed by the departmental officers

Supplying and fixing in position best Bevelled Edge MIRROR of 6mm thick of size 50cm x 40cm fibre glass shelf type with necessary plywood backing and rubber button, chromium plated screws, teakwood plugs, etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing in position best Indian make Aluminium anodised TOWEL RAIL of approved quality and size 60cm long and 20mm dia with brackets of same material including fixing with necessary teak wood plugs C.P. Screws etc., complete as directed by the departmental officers.

Supplying and fixing in position best Indian make Brass Chromium Plated Soap Tray of approved quality of same material including fixing with necessary teak wood plugs C.P. Screws etc., complete as directed by the departmental officers.

Supply and fixing of manhole cover including cost and conveyance of all materials to site and all other labour charges etc., to complete as per std., specification.

Supply and fixing of A.C. Pipe with cowl including cost and conveyance of all materials to site and all other labour charges etc., to complete as per std., specification.

Supply and Fixing of 2000 Lit Capasity HDPE Tank including cost and coveyance of all charges etc., complete

Supply and delivery of 2" Dia PVC Pipe including cost and conveyance ofall materials to site and all other labour charges etc., complete

Towards the cost of charges for Laying and Joining of PVC and GI Pipes with specials including cost and conveyance of all charges etc., complete

Refilling the excavated earth other than sand complying with std., specifications

Supply and Fixing of Following PVC and GI Pipes and Specials of good quality including cost of materials and labour with cost for coveyence to site etc Complete complying with standard Specifications. etc., 32mm PVC Pipe

32mm PVC Coupling

32mm PVC Elbow

32mm PVC Tee

32mm GM Gate Value

32mm x 15mm PVC Reducer

15mm PVC Tap

20mm GI Pipe "'B" Class

110mm PVC 6 Ksc Pipe

110mm PVC Elbow

110mm PVC Tee

110mm PVC Bend

Conducting Geo-Physical survey including conveyance the instrument etc., complete

Drilling of 150mm dia vertical bore well upto the recommended depth etc., complete

Supply and delivery and inserting of 163 mm PVC 6 Ksc casing pipe etc., complete

Supply & Fixing of 30 mm Dia PVC Pipe

Labour charges for erection of pump set in the deep bore well including connection of submersible cable etc.

Supply and delivery of MS Kiosk of size 0.75 x 0.45 x 0.75 for fixing of meter board, switch board with MS door and lock and key arrangements

Supply and delivery of single-phase pump set with motor as per ISI 20 lpm x 150 head including panel board consist of following.

Supply and delivery of single-phase panel board with 2 level guard and auto start

Supply and delivery of 32mm HDPE Hose including all labour charges

Supply and delivery of PVC Insulated and Sheathed 3 core flat type 2.5 sq.mm copper cable conforming to IS 694/1990

ASR CONSTRUCTIONS