PROVN OF COVERED OUTDOOR COMPLEX OUTSIDE NEW AUDITORIUM WITH HARDSTANDING FOR TRAINING AT MCTE UNDER GE (MCTE) MHOW

Amount

B/R WORKS

S&F 0.50mm thick galvalume sheet profile pattern precoated coloured having tensile strength 550 Mpa as in roof covering, fixed with self driving screws complete all as specified.

S&F 0.50mm thick galvalume sheet precoated coloured Profile ridge, fixed with self driving screws complete all as specified.

S&F of structural steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified.

M&L for rolled section/ hollow tube section as in post, main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecction plates including drilling hole for bolting, connecting to gusset plate etc complete all as specified.

S&F of structural steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified.

S&F MS plates (plain or chequered) channels square cut to or notched forming holes with riveted bolted or welded attachment for Fe-410W complete all as specified.

S&F Mild steel screw bolts (machine made) with hexagonal/ square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 22.5cm & n exc 30cm long dia of shank 16 to 20mm complete all as specified.

Excavation in trenches, n. exc 1.5 m wide and n.exc 1.5 m deep in soft/ loose soil and getting out complete all as specified.

Excavating over areas, n.exc 1.5m deep and getting out in soft/ loose soil including dressing/ trimming sides and levelling/ grading and ramming of bottoms of excavation, complete all as specified.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/ loose soil.

Removing excavated soil exc. 50m but n exc 100m & depositing where directed at a level n exc. 1.5 m above the starting point

M&L for earth filling with approved soil/ morooum brought from out side MD land, filling in trenches or paving laid in layers not exceeding 25 cm thick spread, levelled and rammed including watering etc complete all as specified.

M&L for Hardcore of gauge n.exc 63mm, with broken stone or boulderes deposited, spread and levelled in layers n.exc. 15 Cm thick, watered and rammed to a true surface complete all as specified.

M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregates) in foundations, filling and mass concrete complete all as specified.

M&L for 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate complete all as specified.

M&L for Vitrified Ceramic tiles 8-10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified.

M&L for Vitrified Ceramic tiles 8-10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified.

M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/ rounding) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

M&L for RCC (design Mix) M-25 (using 20mm graded stoneaggregates) as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc basement slabs, under reamed plies and mass concrete including demolition of reinforcement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for RCC (design Mix) M-25 (using 20mm graded stoneaggregates) as in columns, pillars, piers, posts and struts and the like including demolition of reinforcement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for RCC (design Mix) M-25 (using 20mm graded stoneaggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span and the like including demolition of reinforcement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Form work to sides of pillars, posts, struts, piers, columns and stanchions with fair finished surfaces square.

M&L for form work to sides of concrete foundation, footings base of columns, sides and soffits of plinth beams and similar works as in rough finshed flat surface complete all as specified and directed.

M&L for form work to sides and soffits of floor or roof beams, lintels, shelves and similar works as in rough finshed flat surface complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to lenth, bend to shape required, including cranking, bending, sprially for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in cement mortar 1:6 on fair faces of brick/ Concrete surfaces finishing the surfaces even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in cement mortar 1:4 on other than fair faces of brick/ Concrete surfaces finishing the surfaces even and smooth with out using extra cement complete all as specified and directed.

M&L for 10mm thick rendering on cement mortar 1:4 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed

M&L for prepration of newly plastered wall sufaces & applying two coats of exterior grade wall putty and applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide all as specified and directed.

M&L for Brickwork with subclass 'B' bricks, straright or corved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

M & L for Providing cement concrete 1:2:4 type B-1 (using 20mm graded stone aggt) as in coping, apex stone, bed plate, kerbs including weathering, slightly rounded or chamferred angles and throating and incl, necessary form work etc complete all as specified and directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified.

E/M WORKS

Point wiring with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed/ surface conduit of suitable size medium grade ISI marked complete, including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly including modular metal flush box, modular cover plate and modular cover frame of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc. complete all as specified and directed for the following:-

(a) One light/ fan/ bell controlled by one, one way switch 5/6 Amps complete all as specified.

(b) One 3 pin, 5/6 Amps socket outlet point on independent board controlled by one, one way 5/6 Amps switch complete all as specified.

(c) One 3 pin, 5/6 Amps socket outlet point on same board controlled by one, one way 5/6 Amps switch complete all as specified.

Point wiring with 2.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed/ surface conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 2.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 Amps socket out-let point on an independent board including modular metal flush box, cover plate and cover frame of suitable size incl taking down carefully copper/ alluminium power point wiring switches, sockets and making good disturbed surface of walls and floors etc. complete all as specified and directed.

S&F of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V complete all as specified.

S&F modular switch 1 way 6 Amps, 1 module complete all as specified.

S&F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed.

S&F switch modular type 16 Amps, 1 module complete all as specified and directed.

S&F socket modular type multipurposes 6/16 Amps, 2 module complete all as specified and directed.

M & L for sub main wiring with 02 runs of 4 sqmm main wire along with 01 run of 4 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed/ surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same & taking down complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.

Supply and fixing 20W LED 6500K lights fitting ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories all as specified and directed.

S&F MCB DB SPN 4 way double door with 200 Amps rated bus bar, 230 volts, 50 Hz including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Supply and fixing 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning. all as specified and directed.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

Supply laying and testing and commisioning cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 2 core laid in pipes, trenches/ ducts, on poles complete all as specified and directed.

Supply laying and jointing GI pipe 'light grade' 50mm bore in trenches/ under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified and directed.

Excavation in trenches not exc. 1.5m wide and not exc 1.5m deep in hard/ dense soil and getting out complete all as specified and directed by Engr-in-Charge.

Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed.

Removing surplus excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed.

M&L for filling approved fine river sand in trenches as cable cushion to the full width of excavated trench, under and over cable complete all as specified and as directed. (Note : Punned thickness of sand shall be measured)

M&L for bricks slightly over burnt (kiln burnt), modular bricks, best quality, locally available, laid flat, dry, laid in trenches along the length of cable transvarsally with width equal to length of brick for cable protection all as specified and as directed.

sunway associates (BID ID -3120715)

J B CONSTRUCTION AND DEVLOPERS (BID ID -3121785)

Sudarshan Associates (BID ID -3131303)

RK CONSTRUCTION (BID ID -3131494)

APconstruction (BID ID -3131621)

M/S UnitedConstruction (BID ID -3120655)

Ms Ajay Builders (BID ID -3131421)

Goyal Construction (BID ID -3131425)