SPECIAL REPAIR TO VISITOR GALLERY AND ENTRANCE GATE OF GYANI STADIUM IN ARTY CENTRE AT MIL STATION NASIK UNDER GE NASIK ROAD

Amount

Dismantling of stone slabs of any description or thickness in floors, aprons etc laid bedded & pointed in any mortar complete all as specifed and directed

S&F Machine cut kota stone slab 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specifed and directed

M&L for Kota stone slab 10-15mm thick in riser of steps, skirting, dado and pillar laid over cement plaster and jointed with gray cement slurry with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L Screed bed or bedding layer of cement mortar 20 mm thick for laying floors finishes in cement mortar 1:6 complete all as specifed and directed

M&L for 75 mm thick PCC 1:4:8 type D2 (using 40mm graded aggregate as in floor concrete complete all as specifed and directed

M&L for 10 mm thick rendering in cement mortar 1:4 on brick masonary or concrete rough finished surfaces as backing coat

M and L for hardcore of gauge n.exc 63mm deposited, spread in layers n.exc 15 cm thick,watered and rammed to a true surface complete all as specified and as directed.

M and L moorum/red bajri filling in floors or pavings, laid in layers n. exc. 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. including removing all the debris out side MD land

M&L for rendering 15 mm thick in cement mortar 1: 4 on brick / stone work or concrete surfaces finished even and smooth without using extra cement

M&L for preparation of wall surfaces including i.e. brooming down on plastered / unplastered surfaces complete and applying two coat of Acrylic weather proof exterior paint over water based primer(Make: APEX of Asian Paint or equivalent) complete all as specified and directed.

Demolition of brick work or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillers etc but including ashlar facings, dressed stone work and precast concrete articles

M and L for brick work with old size fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

All as per item no 13 above but except bricks.

M&L for preparation of old painted surfaces of any description by complete removal of existing treatment and applying three coats of white wash on undecorated surfaces of walls/ceiling complete all as specified and directed.

M&L for random rubble mesonry, uncoursed well bonded bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed.

Raking out joints/ pointing to in cement mortar to random rubble uncoursed or brought up to courses

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness(Below or above ground level) un-reinforced complete all as specified and directed.

M and L for Cement concrete (1:4:8) type D2 using 40mm graded stone aggregates as in foundation lean concrete complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description not other wise described exc.10 cm width or girth and applying one coat of synthetic enamel paint

M&L for rendering 15 mm thick in cement mortar 1: 6 on fair faces of brick/stone work or concrete surfaces finished even and smooth without using extra cement

M&L for preparating newly plastered surfaces of walls and applying two coats of OBD over one coat of chalk whitning, prepatory to distempering complete all as specified and directed.

M & L 05 mm thick rendering in cement mortar 1:4 on concrete surface as in ceiling surface finished even and smooth without using extra cement.

M and L three coat of white wash on on ceiling including preparation all as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc including gate for ornamental and intricate design all as directed by Engr-in-charge

Supply & Fix 2.00 mm thick MS sheet plain black steel door and similar work cut to size, holes, punched including round headed screws with plain 40mm lap joints with riveted or welded seams including bending or turning up mitred angles etc as requried all as directed.

Material & Labour for painting with two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces exc 10cm width or girth including preparation of new steel surfacesall as specified and directed by EIC.

M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width n exc 10cm

M&L Plastering 10mm thick in cement mortar (1:4) on concrete surfaces mixed with water proofing liquid and smooth finished and smooth(without using extra cement). (note- water proofing liquid will be measured separately)

M&L for Waterproofing on roof including flashing and junction of parapet, kerb, wall etc. as under (a) Applying oil based bituminous primer on cleaned and dried surface @ 0.2 kg/sqm. (b) Laying by thermo fusion ( torch applied) 3 mm thick APP based polymeric water proofing membrane weighing not less than 3.5kg/sqm and reinforcement with polyester non woven fabric ( not less than 150 gms/sqm) (c) Painting the exposed APP membrane surface with bituminous aluminium paint @ 0.15kg/sqm

Supply only liquid water proofing compound

S&F Anodised aluminium powder coated ventilator with louvers arrangement type without sash bars, aluminium sections (100x25)mm weighing minimum 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, stainless steel wire cloth 0.36mm nominal dia of wire and average width of apreature 1.40mm with 3mm figured sheet glass fixing in louvers complete all as specifed and directed ( Note: aluminium frame, stainless steel wire cloth, sheet glass, louvers arranagement in each ventilator all this measured in Sqm in this item only)

Vishal Constructions (BID ID -3322132)

Alpha Construction (BID ID -3316322)

MANOVANDANA CONSTRUCTION (BID ID -3322742)