SPECIAL REPAIR TO SEWAGE LINE, DRAINAGE SYSTEM, PATH AND CULVERT AT MANDIR COLONY AND PROVN OF SECURITY FENCING AT ANANT NAGAR COLONY AND CERTAIN MINOR WORKS UNDER AGE B/R-II OF GE (EAST) JABALPUR

Amount

Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Hard/ Dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface complete all as specified.

Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in soft loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface complete all as specified.

M & L for plain cement concrete Type C-2, 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified.

M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of bituminus paint over a coat of red oxide primer complete all as specified.

S&F for chain link mild steel galvanised fencing of any size & weight n exc 4 kg/sqm incl fixing to any type of standards, rail, straining bolts etc including provision of binding wire complete all as specified and directed by Engr-in-Charge.

S& F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing's and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. in aprons, barriers, gates and similar works etc complete all as directed (each line wire to be measured) complete all as specified and directed by Engr-in-Charge.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long . Dia of neck 5 to 10 mm complete all as specified and directed by Engr-in-Charge.

S&F 10mm round bars and over as in stiffner to hold the chain link fencing fixed with angle iron post including necessary welding and fixing arrangement at ends complete all as specified and directed .

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified.

S&F flat iron fillets ( (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engr-in-Charge.

Surface Excavation not Exc 30 CM deep and averanging 15 CM deep and getting out soft loose soil complete all as specified.

Add or deduct Item No 15 Above for every 3 CM part there of above or below 15 CM Ave depth complete all as specified.

M&L hardcore of gauge exc.63 mm but not exc 100 mm deposited , spread and levelled in layers n exc. 15 CM thick, watered and rolled/rammed to a true surface complete all as specified.

M&L 100 mm thick providing cement concrete 1:2:4 of type B-2(40 mm graded stone aggregate) as in hard standing horizontal or slapping or vertical incl. necessary form work finishes even and smooth without using extra cement complete all as specified.

M&L cement concrete 1:4:8 of type D-2(40 mm graded stone aggregate) as in hard standing horizontal or slapping or vertical incl. necessary form work finishes even and smooth without using extra cement complete all as specified.

S&F rolled section as in rafter purline strut , truss etc using MS angle FI or hollwo Sqr sec etc incl cutting welding nut bolt etc complete all as specified.

S&F pre-painted galvalume aluminum zink coating GI based corrugated steel sheet 0.6 mm thick of an colour having and tensile strantgh 550 MPA in roof covering fixed with self tapping screw complete all as specified

S&F pre-painted galvalume aluminum zink coating GI based plain steel sheet 0.6 mm thick of an colour having and tensile strantgh 550 MPA in roof covering fixed with self tapping screw complete all as specified

S&F MS flat Iron as in wind tie incl cutting drilling , hole etc complete all as specified

S&F machine pressed percast concrete interlocking paver block any shape and size conf to IS 15658-2006 of 60 mm thick using rubber mould casting with glossy finish with gray cement and pigment M-35 grade of concrete laid over and including 25mm thick sand cushioning Complete all specified

Excavation in trenches nexc 1.5m wide and nexc 1.5m in depth as in foundation etc n exc 10 Sqm in plan and getting out in any type of soil complete all as specified.

Returning filling in including spreading levelling watering and well ramming in layers nexc 25cm as in soil complete all as specified.

Removing excavated material nexc 100m and depositing where directed at a level nexc 1.5m above the starting point with soil complete all as specified.

M&L RCC 1:2:4 type B-1 (20 mm graded stone aggregate) as in foundation , raft, footing, plinth beam, base for column etc complete all as specified.

M&L RCC 1:2:4 type B-1 (20 mm graded stone aggregate) as in column complete all as specified.

Formwork to side of concrete foundation footing base of column raft beam and plinth beam with required gap filler etc complete all as specified.

Formwork to side/bottom of pillars , post , column, beam, slab square , rectangular or polygonal required gap filler etc complete all as specified.

S&F mild steel bars 10 mm dia and over (TMT) cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S complete all as specified.

S&F mild steel bars 6 to 8 mm dia (TMT) cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S complete all as specified.

M&L10 mm thick Rendering with CM (1:4) over brick/concrete surface even & smmoth without using extra cement complete all as specified.

S&F MS framed work as in doors or gate of angle or other sction with gusset plate , rail , braces etc drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and ilcl either hooks and hings or steel hanging door fiting (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete of Fe-290 grade E-165 complete all as specified and directed.

M&L for three coat of white wash including preparing of new plastered surface of wall etc complete all as specified.

Bailing out sludge from manhole/Septic tank manually or with the help of pumps as per site conditions and disposal of sludge, foul materials as obtained to a distance not exceeding 50 metres in low lying area, including removing & replacing MH cover complete all as specified.

Cleaning pipe drains by rodding or by mechanical means from manhole to manhole located at distance not exceeding 50 M, well flushing with adequate water including taking out and replacing manhole covers in position for the pipe line of size 150mm bore complete all as specified.

M&L for Concrete bed to drain pipes of following sizes including packing under and haunching against the sides of pipes after they are laid and tasted; in cement concrete 1:3:6 type C2 using 40mm graded stone aggregate complete all as specified : -

150mm bore

200mm bore

S&F Salt glazed stoneware drain pipes, grade ‘A’, laid in trenches and jointed of the following sizes complete all as specified.: -.

150 mm bore

200 mm bore

S & F reinforced concrete pipes 200mm bore, class NP2, laid and jointed with and including coller at joints complete with collars complete all as specified

S & F reinforced concrete pipes 150mm bore, class NP2, laid and jointed with and including coller at joints complete with collars complete all as specified

M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in copings, kerbs, benching and the like, including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified

Dismantling of brickwork or stone/ boulders masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc. but not excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 including flush pointing external faces with the same mortar as the work proceeds complete all as specified

-Dittto- all as per item No 46 above but except bricks.

M&L Brick work with sub class 'B' old size bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified

M&L for Rendering 15mm thick in cement mortar 1: 4 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement mixed with water proofing compound (to be measured & paid separately as supply only) complete all as specified

-Ditto- All as per item No 50 above but finished even and smooth using extra cement complete all as specified

Supply only integral water proofing compound.

Demolition of cement concrete (unreinforced) below /above ground level in foundations, mass concrete, kerbs, benchings, etc complete all as specified

M&L for Cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate in surface channels and drains complete all as specified

M&L extra for forming fair finished drain 30 cm inner girth in cement concrete, using extra cement complete all as specified and directed.

Add or deduct each 25 mm girth or part thereof over or under 30 cm complete all as specified and directed.

Demolition of reinforced cement concrete in roofs,floors other than ground floors,beams,staircases,landing chajja and similar suspended works including cutting MS reinforcement complete all as specified.

M & L Precast RCC 1 : 2 : 4 Type B1 ( 20 MM graded stone aggregate) as in cover slab (for manholes, drains etc), set in cm 1: 4 complete all as specified.

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, trenches etc fixed in repair complete all as specified of following bore:-

75mm bore.

110mm bore.

S&F PVC (SWR) bends fixed with access door fixed in repairs complete all as specified of following bore:-

75mm bore.

110mm bore.

S&F PVC (SWR) bends fixed without access door fixed in repairs complete all as specified of following bore:-

75mm bore.

110mm bore.

S&F PVC (SWR) junction single (single T/Y), equal or unequal, provided with access door fixed in repairs complete all as specified of following bore:-

75mm bore.

110mm bore.

S&F PVC (SWR) vent cowl, fixed in repairs, complete all as specified of following bore:-

110mm bore.

M & L Septic tank of 100 users exavation in ordinary soil foundation in PCC (1:2:4) Brick work in CM (1:4) RCC slab Cover in RCC (1:2:4) Including all formwork reinforcement etc complete all as specified. (as per CEIZ/TD/57 sheet No 1/4 to 4/4

M&L for Septic tanks, exc, in ordinary soil, foundation In PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc, complete for 25 users. comlete all as specified and shown in drawing No CEIZ/TD/57 sheet No 1/4 to 4/4

M&L for Brick masonary soakage well including all excavation and earth work in any type of soil foundation in PCC 1:3:6 well of honey comb and solid in RCC (1:2:4) concrete including intercepting chamber screen chamber brick work in cm RCC coverslab in (1:2:4) / brick masonery /filling with brick bat complete of size 2.4m dia and 3.0 m deep comlete all as specified and shown in drawing No CEIZ/TD/58 sheet No 1/1

S&F in repair water closet (squatting pattern) complete including provision of lime concrete bedding viterous china squatting pan orrisa pattern of size 580x440 mm white with P or S trap front or back inlet and foot rest any pattern incl 10 ltrs capacity PVC valveless flushing cistern, low or high level, with inlet, ball valve, syphonic action type, float and handle, pull or push type including brackets complete all as specified and directed .

M&L PVC (SWR) floor trap plain with grating including jointing wth solvent cement, dia of out let 75mm complete all as specified.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 (S & F) complete all as specified

M&L for cement concrete 1:4:8, type D2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed

S & F in repair reinforced concrete pipes 600mm bore, class NP3, laid and jointed complete with collars complete all as specified

M&L 100 mm thick cement concrete type B-2, 1:2:4 (40mm graded aggregate) finishing the surface even and smooth without using extra cement laid in panels, area of rach panel n. exc 9 sqm with and including all necessary form work and filling the joints with mastic filling of one part of hot bitumen 85/25 grade and three part of fine sand (all by weight) including demolition of old PCC and removing rubbish to a distance n. exc. 100 mtr at low laying area complete all as specified and directed.

S&F aluminium composite panel cladding with open grooves for linear as well as curvilinear portions of the building/wall for all heights and all levels etc. including : - (a) Providing fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour or as approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws nuts bolts washers cleats weather silicone sealant backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanized with serrations and serrated washers to arrest the wind load movement fasteners SS 316 Pins and anchor bolts of approved make in SS 316 Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification of manufacturare including base frame work for ACP cladding of aluminium complete all as directed by the Engineer-in-Charge. However for the purpose of payment only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places."

S&F for precast reinforced cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregate in louvres and jallies and including MS round bars 6 mm dia reinforcement as per trade pattern, 35mm thick (measured solid) set in cement mortar (1:4) including all mouldings complete all as specified and directed.

S&F stainless steel work in writing letters of any pattern, section and size of Grade-304 with and including stainless steel nut bolt/screw complete all as specified and directed.

Notes :- Schedule of Credit amounting to Rs. 13,885.00 to be deducted during AOC

M/S N K SONKAR

LAL SINGH & SONS

M/s Om Infracon

M/S CHETAN PRAKASH GOYAL

M/S BHATIA CONSTRUCTIONS